Used Yoco Flat Bed Die Cutter for sale (14,759)

Year of construction: 2019, condition: good (used), functionality: fully functional, Yoco 1650E, ref. 3026 Year: 2019 Maximum sheet size: 1200x1680 mm Bottom feeder – cup feeder Mechanical side lay Motorized pressure adjustment Crjdszvfgropfx Aptog Stripping unit Batch delivery Caliper: E, B, C, EB, laminated board Available immediately

Year of construction: 1986, condition: ready for operation (used), A Ueda Shiko Kikai (Seiko) flatbed die-cutting machine from the 1980s is available. Throughput capacity: approx. 3600 sheets/h, max. sheet length: 1370mm, max. sheet width: 970mm, min. sheet format X/Y: 530mm/300mm, machine dimensions X/Y/Z: approx. 8150mm/2350mm/2050mm, weight: approx. 20000kg. An on-site inspection is possible. Credpfxjxgudbs Apteg

Year of construction: 2004, condition: ready for operation (used), A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible. Crodoyxq Ucopfx Aptjg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Csdpoww E Nrefx Aptsrg Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations

Year of construction: 2001, operating hours: 27,400 h, condition: good (used), functionality: fully functional, Die-cutting machine with stripping station, foundation tilting table (third-party manufacturer), tilting table/preparation table, waste stripper, electronic double-sheet detection, pull marks BS + AS, machine height increased by 300 mm, 1 die-cutting frame, various stripping frames and stripping pins (including cart), quick centering device for sheet stacks, manual non-stop feed, manual non-stop delivery, price ex works, dismantling and loading can be arranged for an additional charge! Video available upon request! In May 2026, a PLATEN CONDITIONING was carried out by BOBST on the die-cutting machine. All deposits were removed from the upper and lower tables, and the die was polished. The sector was opened and assessed as being in "like-new" condition. Photos, video, or invoice available upon request! Cjdpfxezmyfdo Aptsrg Note: The platform must be adapted by the buyer! Longitudinal handrail missing! Technical main data: Maximum sheet size: 720 × 1020 mm, Minimum sheet size: 350 × 400 mm, Maximum die-cutting force: 250 tons (2.5 MN), Maximum production speed: 7,500 sheets per hour, Processable materials: Paper / solid board: from 80 g/m² up to 2000 g/m², corrugated board: up to 4.0 mm thick Dimensions and weight: Machine length: approx. 6,000 mm Machine width: approx. 2,000 mm Machine height: approx. 2,500 mm Total weight: approx. 19,500 kg Features of the Series II: C.U.B.E. system: Electronic Bobst machine control system Centerline system: Micrometric adjustment for fast set-up times and precise tool alignment Stripping station: Integrated double-round stripping unit for waste removal Non-stop system: Continuous sheet feeding and delivery Ultrasonic double-sheet detection

Year of construction: 1995, condition: like new (used), * Automatic flatbed die cutter Codpokyt U Tefx Aptjrg * Very good condition. Cldsvexqcy * Possible to see in production. * Max size 1100x1600

Condition: used, Die-cutting machine – Swivel frame die-cutting machine – Flatbed die-cutting machine – Toggle press – Eccentric press Die-cutting machine + feeder for use with strip-type die-cutting tools Flatbed die-cutting machine HELMERDING, type PSH 25 Item no. EP 97784, Machine no. 6073, Year of manufacture 1998 Pressing force 25 tons Distance between tie rods 700 mm Table area = installation space 800 x 670 mm Table area = installation frame, width 510 x depth 440 mm, plate thickness 20 mm Punch area 800 x 670 mm Through-hole in the table 490 x 420 mm Punch stroke 45 mm Punch adjustment distance 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min Motor power 15 kW Mains connection 400 volts, 50 Hz - controlled drive for stepless stroke rate adjustment - pneumatic clutch-brake combination - punch equalizing cylinder - automatic central lubrication system VOGEL Credpodzqmzefx Aptog - massive base plate with 4 vibration damping elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons Good condition Previously, the machine was used for die-cutting cardboard sheets. Ideal for die-cutting non-woven fabrics or similar materials for respiratory masks.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. Credpfxjxdmgvo Aptog The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: good (used), Heidelberg Cylinder SBD 64×89 Automatic Die Cutter The most sought-after machine on the market, in its late 2000s. The machine is in very good condition and ready for operation. Crsdpfx Apozvgk Eetog Format: 640x890mm The machine is ready for die cutting. Fully automatic, with smooth speed control, central lubrication, and safety guards. The machine features a quick-change carriage system on the infeed and a convenient cabinet on the side of the machine. Includes two frames, spare parts, a cylinder plate, carriages, and a large set of fillers and locks.

Condition: new, ML-1400 NXL die cutter The machine is brand new. It is the heaviest die cutter in this format. Format: 1400 × 1000 mm Weight: 6500 kg 380 V power supply Engine: 5.5 kW Working speed 15 +/- 2 cycles / min Equipment: – electromagnetic clutch and brake Crodpsztn Ruofx Apteg – quick assembly frame – 3 modes of operation: continuous, with time delay, manual – central lubrication – additional safety covers – service tools and instructions with CE documentation. The machine is available „immediately” We provide 12 months warranty. Our machines as few on the market are adapted to current regulations in EU. Possibility of testing in the showroom in Radom.

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Crodpfx Asztn N Rjptjg Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container.

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 The machine is fully operational, ready for production. Csdpfxoztn I Hs Aptjrg Titan is synonymous with power, it is the strongest machine in its class. Production Italy Format in frame 830×1200 mm Format of the press 855x1230mm Weight 6900kg Power supply 380V Number of cycles 900-1400/h Installed power 5.5 kW Equipment: – electromagnetic clutch and brake – control panel – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press

Condition: good (used), Heidelberg Cylinder KSB 40×57 Automatic die-cutter A very rare model on the market. The machine is ready to work, in very good technical condition. After inspection. Suitable for die-cutting. Crsdpfxeztn Iyo Aptjg Central lubrication. Format 40×57 cm Weight 3500 kg Power supply 380 V Includes two drawers of additional elements, frame, sheet metal for the cylinder, fillers and typographic locks.

Condition: ready for operation (used), functionality: fully functional, SASPI GV3-20 Cedpfx Apoxv Si Tsterg Threaded diameter M4-M12 Shaft length under head 150 mm Max threaded length 130 mm Production rate 85-220 parts/min weight 4400 kg motor power 14 KW Excellent condition ! "Your Next Reliable Production Machine Starts Here"

Year of construction: 1973, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 658, Available directly from our warehouse in Son; Credpfsxz Niujx Aptsg heavy stamping die with electric coupling, electrical system completely renewed around 2019, original build year 1973; mechanically fully overhauled in 2015, moving die resurfaced, die pins and gears replaced with new pins of a much stronger mechanical grade than originally, as well as the bronze bearings now made from material grade 2.1061 DIN 1705; this is extremely wear-resistant with the addition of Pb (lead) for better performance and good emergency running characteristics (i.e., no lubrication), stamping plate 144 x 104 cm, thickness 5mm. Electrically upgraded with PILZ safety relays on each channel, motorized clamping of the stamping die. Maximum stamping die size with automatic clamping 900 x 1300 mm. Safety bars are much more extensive and more robust compared to the original design, 350 tons of stamping force.

Condition: used, Letter Press Tiegel in good condition - DIE Cutter Heidelberg OHT in einem guten Zustand. Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1953 - Serial-No. 43717 Codpfxoztzp Rs Aptjrg Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) Credpfozph N Asx Aptsg 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M14I/9063, Offer Number: M14I/9063 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND Crodpfx Apjxnyrtjtjg Type: FL-10-80 Constr. year: 1985 diameter range: 10 mm shaft length under head: 180 mm max. thread length: 80 mm output - pieces/min: 400 Location: Germany

Condition: used, Rabolini Imperia B2 Heavy-Duty Platen Die Cutter / Creasing Press Short Technical Description / Summary Professional Italian-made Rabolini Imperia B2 platen die cutting machine ("clamshell" press). Renowned for its robust cast-iron frame construction and high cutting impression force. Ideal for die-cutting, creasing, scoring, and embossing on paperboard, solid cardboard, corrugated board, micro-flute, and plastic sheets. Key Technical Specifications Manufacturer: Rabolini (Imperia) Model / Brand: Imperia Crodpfezur Dbjx Aptjg Format Size: B2 (approx. 520 x 720 mm ) Country of Origin: Made in Italy Machine Type: Clamshell Platen Die Cutter / Creasing Press Drive Mechanism: Heavy-duty motor drive with flywheel, clutch-brake unit, and reduction gear Operating Modes: Single stroke, continuous operation, and timed dwell (dwell timer) Compatible Materials: Cardboard, solid board, corrugated fiberboard, plastics (PP/PVC), foam board Features & Equipment Ergonomic top control box mounted on a movable arm for easy setting adjustments. Dwell timer to adjust the platen open time during manual feeding. Hardened steel cutting plate mounted on the movable platen. Integrated safety frame / sensitive guard bar system protecting the operator area. Centralized lubrication system for smooth, continuous operation. Condition & Availability Condition: Used, fully complete and intact. Sourced directly from print shop production.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2003, total length: 13,900 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 9,010 mm, color: light grey, Year of construction: 2003, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: SAF Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 20%; Tyre profile right: 20% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 20%; Tyre profile right: 20% Crjdpfx Ajzxyqwsptog Rear axle 3: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 20%; Tyre profile right: 20% Weights Empty weight: 7.100 kg Carrying capacity: 31.900 kg GVW: 39.000 kg History Number of owners: 1 Condition General condition: average Technical condition: average Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, Year of construction: 1973, This Krause C64-50 Autofeed Die Cutter is a powerful machine designed for precise and efficient die cutting work. With a maximum format of 600 x 500 mm, it offers the flexibility to handle a wide range of materials. The machine is currently located in the Netherlands and is standing still, which represents an ideal opportunity for those looking for a high-quality die cutting machine. Format: 600 x 500 mm Min. Size: NULL Max. Size: Maximum sheet size: 600 x Net Weight: 8.200 kg Measurements: L: 3.320 W: 2.440 H: 2.13 Equipment: Krause autofeed die cutter Max. Size: 60 x 50 cm (23 x 19 inch) Processable materials: Paper, heavy cardboard, corrugated board, plastics, and leather Credpfjvfx Ulox Aptsg Maximum cutting pressure: Approx. 40???50 tons (engineered for high-precision heavy die cutting)

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Very good condition. The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm Number of cycles: 18/min Productivity: 900,000 sheets/h Codpfx Apjzmu I Hotorg Weight: 700 kg The machine is equipped with a hydraulic quick-action unit. Photo safety barriers. Adjustable feed table in all directions. Two operating modes: semi-automatic and manual. Tail on the delivery.

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: M14L/9004, Offer Number: M14L/9004 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND Type: FN10/12-80 Cjdpfxswi T U Ts Aptsrg Constr. year: 2002/2024 diameter range: 6-12 mm shaft length under head: 180 mm max. thread length: 80 mm output - pieces/min: 100-330 Location: In our warehouse

Condition: used, Year of construction: 1973, functionality: fully functional, machine/vehicle number: M14L/9094, Offer Number: M14L/9094 Machinetype: thread rolling machine - flat die Cjdpfx Apjzwqh Rstorg Make: MENN Type: GW32 Constr. year: 1973 diameter range: 1,6-4 mm shaft length under head: 50 mm max. thread length: 30 mm output pieces/min: 300-750 Location: In our warehouse

Condition: good (used), Ram Punch Gerhard Busch CL Label die cutter Professional machine made in Germany. Very good condition, ready to operate. Bush is a leader in the production of labeling machines and pushers. 100% functional, with no signs of wear. Technical specifications: Max. format: 330x380mm Min. format: 130x180mm Cycles: 8/min Stroke length: 180mm Capacity: 400,000 sheets/h Codpozlgf Ijfx Aptorg Installed power: 15kW Weight: 2600 kg The machine is equipped with a quick-action hydraulic unit. Safety guards, photocells activating automatic operation, and quick-adjustable die-cutting clamps with a crank. Angle adjustment of the entire head, piston stroke adjustment, and table adjustment. Feeder table adjustable in all planes. Two operating modes: automatic and manual. Tail on the delivery. Tool kit, conveyor belt for removing waste to the container. Made in Germany.