Used Zeiss Probe Heads & Sensors for sale (15,877)

Condition: new, functionality: fully functional, Equipment: documentation/manual, type plate available, New, unused ZEISS scanning probe set, comprising: ZEISS VAST XXT TL3. ZEISS VAST RDS head. Compatible with ZEISS PRISMO, ACCURA, CONTURA, and current-generation CMM platforms. Condition details: Isdpfxozuur Ij Agyjbc New, never installed/used Complete accessory set as pictured

Condition: excellent (used), Year of construction: 2020, operating hours: 12,500 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 800 mm, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, We are offering the following: a Zeiss CONTURA 9/18/8 Vast XT Gold CMM in very good condition, manufactured in 2020. Type: CMM CONTURA 9/18/8 Year of manufacture: 2020 Operating voltage: 100–240 V Frequency: 50–60 Hz We are selling our ZEISS Industrial Quality Solutions Contura 9/18/8 CMM, installed in 2020. It has been housed in a climate-controlled measuring room since day one. The data, taken directly from Zeiss's service log (as of June 2025): - 10,284 operating hours - 169.9 km traveled by the axes combined (X: 49.5 km, Y: 80.4 km, Z: 40.1 km) - Approximately 2,000 hours per year, consistently, with the same steady pace – no last-minute overtime before we listed it - Zero significant component replacements - Relocated, serviced, and recalibrated in June 2025 – all results within tolerance, no laser correction needed One honest point, because we don't deal in exaggerated claims: the controller logged a few probe collisions over the years, some at higher speeds. However, probe performance was still good and passed the 2025 calibration without issue. We're mentioning this now so you won't find it in the log later and wonder why we didn't disclose it. Probe head: VAST XT Gold Software: Calypso CNC 7.2 + QS-Stat-out Included accessories: PC, monitors, sensor rack Other accessories (stylii from GOEKELER Messtechnik GmbH, fixturing elements from dk FIXIERSYSTEME GmbH & Co. KG) are available upon request (we have a large supply, please inquire), and you can also take the compressor (from Atlas Copco) and other accessories. Price: €110,000 net (packed by Zeiss (with the original transport frame and pallet) and loaded onto your truck at our office in Budapest, Hungary) It has measured everything from a few millimeters to 2 meters and has never failed us; it is still in daily use. If you have any questions or need further information, please send us a message or call us. Ibsdpfxjzuzf Ij Agyec

Condition: used, ZEISS Multisensory CNC Coordinate Measuring Machine O-INSPECT 442 Professional coordinate measuring machine for optical and tactile precision measurements in industry, research, and quality assurance. For sale is a used multisensory coordinate measuring machine from the manufacturer Carl Zeiss IMT GmbH. The ZEISS O-INSPECT 442 combines highly precise optical and tactile measurement technology in a CNC coordinate measuring machine. The installed ZEISS CALYPSO measurement software enables convenient evaluation of measurement data as well as the display of the actual state, target profile, and deviations. The system is ideal for quality assurance, toolmaking, precision engineering, medical technology, as well as research and development. Technical data: Manufacturer: Carl Zeiss IMT GmbH Model: O-INSPECT 442 Type: Coordinate measuring machine Measuring range X: 400 mm Measuring range Y: 400 mm Measuring range Z: 200 mm Max. workpiece weight: 20 kg Noise level: < 70 dBA Measurement system: Multisensory measurement system Optical and tactile measurement CFS measuring head system CALYPSO measurement software CNC-controlled measurement sequences Electrical data: Supply voltage: 100 / 110 / 120 / 125 / 230 / 240 V AC (±10 %) Current type: 1 / N / PE Frequency: 50–60 Hz (±3.5 %) Power consumption: max. 1500 VA Dimensions: Width: 1,055 mm Depth: 1,351 mm Height: 1,770 mm Weight: Coordinate measuring machine: approx. 800 kg Max. workpiece weight: 20 kg Equipment: Integrated control Control panel Computer with peripherals ZEISS CALYPSO Software 5.2 Documentation CFS measuring head system Reference probe Calibration standard Calibration template Applications: Coordinate measuring technology Optical measuring technology Tactile measuring technology Quality assurance Toolmaking Precision engineering Medical technology Research and development Scope of delivery: Iedpfxozii Dhs Agysbc ZEISS O-INSPECT 442 coordinate measuring machine Integrated control Control panel Computer with peripherals ZEISS CALYPSO Software 5.2 Documentation Measuring head system Reference probe Calibration standard Calibration template Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos or other items not explicitly mentioned are not included in the sale. Due to its size and weight, shipping is possible via a freight forwarder. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Zeiss CNC Coordinate Measuring Machine Prismo VAST GOLD Year of manufacture: 2001 Isdpfozkhzhjx Agyjbc Completely refurbished optically in 2024 and 2026 Last calibration: 11/2023 Measuring range: X = 900 mm, Y = 1800 mm, Z = 700 mm In excellent technical and optical condition Device features, equipment: C99 control unit with operating panel Automatic temperature compensation VAST GOLD sensor system Probe changer magazine, 17-position Probe changing plate, 20x Probe accessories Calibration sphere Reference probe HP Z4 workstation with WIN11 and monitor Calypso Basic 2024 software QS-Stat option Calypso upgrade and other options possible Further accessories and options possible Available on short notice

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: ZEISS Comet®LƎD 8M, workpiece weight (max.): 5,000 kg, workpiece length (max.): 1,000 mm, workpiece height (max.): 1,000 mm, workpiece width (max.): 1,000 mm, ZEISS Comet®LƎD 8M Ibedpfx Agezwk Nbjyec

Condition: excellent (used), functionality: fully functional, For sale is a Keyence IV2-G500CA vision sensor, color version, from the high-performance IV2 series by Keyence. The device is in excellent optical and technical condition – tested, clean, and free of damage. The IV2-G500CA is a compact color vision sensor with integrated illumination, ideal for use in industrial image processing, quality control, and automation applications. Technical specifications: Model: IV2-G500CA Type: Color camera / vision sensor Manufacturer: Keyence Corporation (Japan) Series: IV2 Series Compact design with integrated lens and illumination CE and KC certified Isdpfxex Hyt Rj Agyebc Connection via Keyence IV2 connection cable (not included) Scope of delivery: 1× Keyence IV2-G500CA sensor head (without controller, cable, or additional accessories) Note: A compatible IV2 controller (e.g., IV2-500C or IV2-500MA) and a connection cable are required for operation. The device offered here is the sensor head only, not a complete system.

Condition: excellent (used), Year of construction: 2018, operating hours: 13,000 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,500 mm, overall weight: 8,000 kg, For sale on behalf of a customer is a ZEISS PRO T advance 16/15 3D coordinate measuring machine. The machine is currently fully operational and connected to the power supply. Ibjdsz Rmkyepfx Agyoc Technical data and features: - Year of manufacture: 2018 - Operating hours: approx. 13,000 - Control system: ZEISS C99N - Measuring range: X 3,200 × Y 1,600 × Z 1,500 mm - Rotary-swivel joint: ZEISS RDS-C6 - 3D measuring head: RST-P - Ceramic probe ball, identification C02258-d - RDS probe changing magazine - 36-piece RST probe kit - Measuring software: ZEISS Caligo - PC workstation: HP Z440 G3 with Intel Xeon E5-1620 v4, 32 GB RAM and NVIDIA Quadro K2200 - Measuring table: solid special cast iron table, flatness according to DIN 876/II - Last DAkkS calibration: 02/26

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Zeiss CNC Coordinate Measuring Machine Prismo 9/15/7 VAST GOLD Year of Manufacture: 2000 Retrofit 2024, Last DAkkS Calibration 12/2021 Ibedpfxszq U Rco Agysc Measuring Range: X = 900 mm, Y = 1500 mm, Z = 700 mm In excellent technical and optical condition. Device features, equipment: C99 control system with BP26 control panel Automatic temperature compensation VAST GOLD sensor system Probe changer magazine MSR 10-position VAST Probe changer turret 8x VAST Reference probe Temperature probe Probe accessories Calibration sphere HP Z4 workstation with WIN11 and monitor Calypso Basic 2024 software Options: QS-Stat Calypso upgrade and further options available Additional accessories and options available Available for immediate delivery.

Condition: like new (used), Year of construction: 2021, operating hours: 1,075 h, functionality: fully functional, Equipment: documentation/manual, ZEISS GOM ATOS Q Professional 8M – 8M 3D Scanner + MV170/MV350 + ROT350 – Like New _____ For sale is a GOM ATOS Q Professional 8M optical 3D measuring and scanning system, purchased new in 2021. Complete system includes: • GOM ATOS Q Professional 8M 3D scanner • 8 MP camera system • MV170 measuring volume • MV350 measuring volume • GOM ROT 350 rotary table • Calibration equipment and calibration panel • Original GOM mobile stand with adjustable sensor arm • GOM software with license dongle • System backup • Original GOM documentation and manuals • Original calibration / acceptance documentation • Connection cables and accessories shown in the pictures  The system can be inspected and demonstrated in operation by appointment. The system is in excellent, like-new condition and has seen extremely little use. It was used only a few times for the dimensional inspection of small precision medical plates/components. The system was purchased new and has remained in a professional quality-control environment at a high-precision CNC manufacturing company. Ijdpfx Agoz D E Eneyjbc The ATOS Q is a professional optical 3D measuring system designed for high-precision dimensional inspection, quality control, CAD comparison, first article inspection and reverse engineering. Due to its extremely limited use, the complete system is in excellent condition and is practically like new. • Year: 2021 • Condition: Extremely low usage - like new – used only a few times for dimensional inspection of small precision components. • Location: Trnovec Bartolovecki, 42202, Croatia • Availability: Immediately • Price: price on request Additional photographs, documentation and technical information are available upon request. Original purchase documentation is available. Manufacturer: GOM GmbH / ZEISS Model: ATOS Q Professional 8M Type: Industrial optical 3D measuring / scanning system

Condition: good (used), Year of construction: 2012, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, Equipment: lighting, type plate available, Year of manufacture: 2012 Tactile: Vast XXT E0 X/Y (1D) in [μm] at 20 ±2 °C 1.7 + L/250 E0 XY (2D) in [μm] at 20 ±2 °C 1.7 + L/250 E0 (3D) in [μm] at 20 ±2 °C 1.9 + L/250 Scanning probing deviation MPE according to ISO 10360-4:2000 THP at 2.7 [μm] Single probe probing deviation form MPE according to ISO 10360-5:2010 PFTU 1.9 [μm] Camera system: Zeiss Discovery 12 EB X/Y (1D) 5) in [μm] at 20 ±2 °C 1.7 + L/250 EB XY (2D) 5) in [μm] at 20 ±2 °C 1.7 + L/250 Probe deviation MPE according to ISO 10360-7:2011 PF2D 5) 1.7 [μm] Probe deviation of the image processing system MPE according to ISO 10360-7:2011 PFV2D 5) 1.2 [μm] Isdpfjuq Nfhsx Agyebc Possible services: delivery, commissioning

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 1,000 mm, ZEISS ACCURA measuring machine 12/10/10 automatic Measuring range: 1200x1800x1000 Head: ZEISS RDS CAA Sensor: ZEISS VAST XXT - TL3 Probe changer: 3 stations Iedpfx Agsxq R R Esyobc Controller: ZEISS C99 Software: Calypso 2011 Year of manufacture: 2011 Warranty: to be agreed Description: machine in perfect working order and excellent cosmetic condition

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 156521, measuring range X-axis: 750 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 250 kg, total height: 3,020 mm, type of input current: AC, total width: 2,092 mm, total length: 2,140 mm, overall weight: 4,500 kg, table width: 900 mm, table height: 860 mm, table length: 1,300 mm, travel speed (max.): 520 mm/min, table load: 250 kg, ambient temperature (max.): 40 °C, ambient temperature (min.): 15 °C, maximum load weight: 250 kg, Equipment: type plate available, For sale is a used ZEISS GageMax 7/5/5 Navigator 3D coordinate measuring machine with serial number 156521 and manufactured in 2011. The machine has a measuring range of 750 × 500 × 500 mm and is designed for workpieces up to 250 kg. It is equipped with a ZEISS VAST XT probe system. The measuring volume also includes a multi-probe changer with various probe holders. According to the original auction description, the offered lot includes accessories and computer equipment. The available images show, among other things, a computer, monitor, keyboard, mouse, and other components belonging to the machine. The scope of delivery is based on the images or the components available during inspection. Technical data: Manufacturer: ZEISS Model: GageMax 7/5/5 Navigator Serial number: 156521 Year of manufacture: 2011 Measuring range X/Y/Z: 750 × 500 × 500 mm Maximum workpiece weight: 250 kg Probe system: ZEISS VAST XT Ibodszwwkxepfx Agyjc Multi-probe changer included Computer equipment included Last documented calibration: 02/2025 The machine is in used condition. A current functional test was carried out by ZEISS. An on-site inspection is possible by arrangement and is expressly welcome. The machine is preferably sold for collection. Loading and transport can be arranged by agreement. Scope of delivery as shown in the images. Subject to prior sale.

Condition: like new (used), Year of construction: 2013, measuring range X-axis: 1,600 mm, measuring range Y-axis: 4,200 mm, measuring range Z-axis: 1,500 mm, workpiece weight (max.): 5,000 kg, Equipment: type plate available, CARL ZEISS CNC coordinate measuring machine ACCURA II MASS 16/42/15 Year of manufacture: 2013, Overhauled: 2025 Measuring range: X = 1600 mm, Y = 4200 mm, Z = 1500 mm Control system: C99 SR VII Control panel: BP26_SE Sensor: VAST XT GOLD and RDS-CAA with VAST XXT Probe changing magazine: Multi Sensor Rack MSR Automatic temperature compensation Accuracy: VAST XT GOLD / RDS-CAA XXT Iodpfx Ajydnzcegyjbc MPE-E 3.6+L/300 4.9+L/200 R0 2.4 5.5 MPE-P 3.6 4.9 MPE-THP 3.7/68sec 4.7/68sec RONt 3.5 5.5 HP Z4 WIN11 workstation with 27" monitor Calypso Basic, current version Any further option possible Accessories: Calibration sphere Exchangeable probe tips XT and XXT Exchangeable magazine slots Probe accessories Documentation Further accessories

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 200412480282, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 600 mm, table width: 1,000 mm, table length: 1,600 mm, year of last overhaul: 2025, Equipment: type plate available, Coordinate measuring machine Zeiss SPECTRUM 10/16/6, year of manufacture 2004, calibrated until 2025, less than 1,000 operating hours since control replacement in 2018. Condition: good, relatively little use, minor transport damage to the granite table (not functionally relevant). Year of manufacture: 2004 (date of manufacture 12/2004) Location: West Saxony Price: on request Technical data: Manufacturer: Carl Zeiss IMT GmbH / Carl Zeiss Inc. IMT Corporation Model: SPECTRUM 10/16/6, U-STONE (granite measuring table) Part No.: 623266.9803.013 Serial No.: 200412480282 Measuring range: X 1,000 mm × Y 1,600 mm × Z 600 mm Measuring software: Zeiss Calypso, Version 6.2.12 Control: replaced in 2018 Probe head: swiveling probe system with extensions/probe holders (see photos) Ibodjzxgmxjpfx Agyec Design: gantry measuring machine, CNC drives Condition/Use: Operating hours since control replacement in 2018: less than 1,000 hours – very little use. Calibration performed in 2025. The granite measuring table has minor, purely optical transport damage (see photos), which is not functionally relevant. Description: For sale is a Zeiss SPECTRUM 10/16/6 coordinate measuring machine with a granite measuring table (U-STONE), year of manufacture 2004. The gantry measuring machine has a measuring range of 1,000 × 1,600 × 600 mm, a swiveling probe system with extensions, and is operated with the Zeiss Calypso measuring software (Version 6.2.12). The control system was completely replaced in 2018 – since then, less than 1,000 operating hours have been logged. The machine is in good technical condition and was calibrated in 2025. The granite table has minor, purely cosmetic transport damage that does not affect its function. Inspection and functional testing at the location in West Saxony are possible by appointment. Price: please request a quote.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 151255, measuring range X-axis: 750 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 250 kg, total height: 3,020 mm, type of input current: AC, total width: 2,092 mm, total length: 2,140 mm, overall weight: 4,500 kg, table width: 900 mm, table height: 860 mm, table length: 1,300 mm, travel speed (max.): 520 mm/min, table load: 250 kg, ambient temperature (max.): 40 °C, ambient temperature (min.): 15 °C, maximum load weight: 250 kg, Equipment: type plate available, For sale is a used ZEISS GageMax 7/5/5 Navigator 3D coordinate measuring machine with serial number 156521 and manufactured in 2011. The machine has a measuring range of 750 × 500 × 500 mm and is designed for workpieces up to 250 kg. It is equipped with a ZEISS VAST XT probe system. The measuring volume also includes a multi-probe changer with various probe holders. According to the original auction description, the offered lot includes accessories and computer equipment. The available images show, among other things, a computer, monitor, keyboard, mouse, and other components belonging to the machine. The scope of delivery is based on the images or the components available during inspection. Technical data: Manufacturer: ZEISS Model: GageMax 7/5/5 Navigator Serial number: 156521 Year of manufacture: 2011 Measuring range X/Y/Z: 750 × 500 × 500 mm Maximum workpiece weight: 250 kg Probe system: ZEISS VAST XT Multi-probe changer included Computer equipment included Last documented calibration: 02/2025 The machine is in used condition. A current functional test was carried out by ZEISS. An on-site inspection is possible by arrangement and is expressly welcome. Ibodpfx Ajz Ebzbsgysc The machine is preferably sold for collection. Loading and transport can be arranged by agreement. Scope of delivery as shown in the images. Subject to prior sale.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Zeiss CNC Coordinate Measuring Machine Prismo 9/15/7 MASS VAST GOLD - RDS+VAST XXT Iodpfx Aezk Id Aogyobc Year of manufacture: 2004 Retrofit 2024, last calibration 01/2025 Measuring range: X = 900 mm, Y = 1500 mm, Z = 700 mm In excellent technical and optical condition. Device features, equipment: C99 control system with BP26_SE control panel Automatic temperature compensation VAST GOLD sensor system RDS sensor system with VAST XXT Probe changer magazine MSR 10-position VAST Gold Probe changer magazine 3-position VAST XXT Probe changer plate 8x VAST Gold Probe changer plate 3x VAST XXT Reference probe Temperature probe Probe accessories Calibration sphere HP Z4 workstation WIN11 with monitor Calypso Basic 2024 software Curve and QS-Stat options Calypso upgrade and other options possible Further accessories and options possible Available for short-term delivery.

Condition: used, Used 3D CNC coordinate measuring machine. ZEISS Prismo 7 – upgraded in 2016 with UCC control, PH10M rotary-head-system, joystick box, SP25 scanning probe, and a PC with RationaDMIS 3D software. Further details available upon request Ijdpfxsy Nzk Ao Agysbc Measuring range X = 900 mm - Y = 1200 mm - Z = 700 mm Price: upon request ᐳᐳᐳ One-of-a-kind item - while available ᐸᐸᐸ Request our detailed quote. Of course, we provide all services such as installation, maintenance, service, training, programming, etc.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: Ser. Nr. 151041, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, Equipment: type plate available, Multisensor Coordinate Measuring Machine O-Inspect O-Inspect O-I 442 Measuring range: X = 400 mm, Y = 400 mm, Z = 200 mm Length measuring deviation according to ISO 10360-2 with VAST XXT: MPE_E = (1.9 + L/250) µm, MPE_P = 1.9 µm Scanning performance according to ISO 10360-4 with VAST XXT: MPE_THP = 3.5 µm in 68 s Length measuring deviation according to VDI/VDE 2617 Sheet 6.1 for Discovery Zoom objective: MPE_E2D(OT) = (1.9 + L/250) µm Permissible temperature range for specifications: 19–21 °C Machine features, equipment:  Gantry-type measuring machine with a moving machine table  Table height approx. 850 mm  Path measuring system, 0.1 µm resolution  Integrated vibration damping  PC-based scanning control (ISC) integrated  Prepared for optical camera system Discovery Zoom sensor and tactile scanning probe VAST XXT TL1  Integrated through-light system  Numerical control panel, standard with rotatable tray  Calibration sphere D = 25 mm  Calibration ring  Regularly calibrated by ZEISS  Last calibration: April 2025  Complete calibration history available  Comprehensive accessory package including VAST XXT TL1, Discovery Zoom sensor, RT-OI Horizontal Complete, grid plate, glass frame, and Calypso software  Original ZEISS documentation available The machine has been regularly calibrated and inspected by ZEISS. Corresponding calibration protocols are available. Calibrations performed:  October 2009  November 2011  November 2013  January 2015  January 2016  January 2017  January 2018 Isdpjzg Ef Nofx Agyjbc  February 2019  January 2020  March 2022  April 2023  April 2025 Note: The regular calibrations by ZEISS document the continuous maintenance and proper operation of the measuring system. The corresponding calibration protocols can be made available for review upon serious purchase interest.

Condition: used, Measuring head (CMM) rigid probe RENISHAW type PH5 + TP20 + PEL1-50 Measuring probe for measuring machine Serial: 77501 - A Probe holder Probe body TP20 for interchangeable modules (probe modules) Extension - type PEL 1, length 50 mm Probe mounting M8 thread Head mounting with MS shaft Ø 9.5 mm - Status display with 2 LEDs - Cable connection via 5-pin DIN 180° socket - 5 M8 threaded connections for probes (4 blanking plugs) total weight 280g used in good condition Ijdpsrnagpsfx Agyjbc

Condition: used, Probe for measuring machine, measuring head, probe head RENISHAW Probe Kit - TP 20 System Included are: 1x star probe with thread M2 (5x stylus M2 with ruby ball Ø 2mm; length 15mm; star Ø 38mm; 1x 6-way probe head = probe module TP 20 (6-way) 1x extension 50mm, probe extension NVMS-50 (with 2x mounting wrench) in original plastic storage box Iedpfx Ajtpkybjgyebc used in good condition

Condition: excellent (used), Equipment: type plate available, ZEISS O-INSPECT 442 Multisensor CNC Coordinate Measuring Machine Manufacturer: Carl Zeiss IMT GmbH, Germany Type: O-INSPECT 442 Machine Type: Multisensor CNC Coordinate Measuring Machine Measuring Range: 400 × 400 × 200 mm For sale is a used ZEISS O-INSPECT 442 coordinate measuring machine, including a comprehensive set of original ZEISS accessories, measuring sensors, software, and a vibration isolation platform. The O-INSPECT 442 combines highly precise optical and tactile measuring technology in a CNC-controlled measuring machine. The combination of ZEISS Discovery V12 zoom optics, VAST XXT probe system, and the installed ZEISS CALYPSO 2019 measuring software makes this system ideally suited for quality assurance, incoming goods inspection, toolmaking, precision engineering, medical technology, research, and development. Technical Data: Manufacturer: Carl Zeiss IMT GmbH Model: O-INSPECT 442 Type: 622810-9806-000 Serial Number: 138890 Year of Manufacture: 2008 Measuring Range X: 400 mm Measuring Range Y: 400 mm Measuring Range Z: 200 mm Max. Workpiece Weight: 40 kg Supply Voltage: 100 / 110 / 120 / 125 / 230 / 240 V AC Frequency: 50 / 60 Hz Power Consumption: max. 1500 VA Measuring System: ZEISS VAST XXT tactile measuring system ZEISS Discovery V12 telecentric zoom objective White light distance sensor Coaxial top light Through-light illumination 16-segment multi-color ring light Automatic CNC measuring cycles Software: ZEISS CALYPSO 2019 measuring software 2 Industrial PCs 2 Monitors Original software media Original ACRONIS recovery/boot media Documentation Dimensions: Machine (W × D × H): approx. 1,055 × 1,351 × 1,770 mm Weight: Coordinate measuring machine: approx. 800 kg Bilz vibration isolation platform: approx. 360 kg Total weight: approx. 1,160 kg Equipment: ZEISS O-INSPECT 442 coordinate measuring machine ZEISS VAST XXT probe system ZEISS Discovery V12 zoom optics Ibsdpfjzl Dkuox Agyoc Original ZEISS control panel ZEISS CALYPSO 2019 measuring software 2 Industrial PCs 2 Monitors Original software media Original ACRONIS recovery/boot media Reference standard Comprehensive set of ZEISS measuring probes and styli Several measuring adapters Original ZEISS accessory case Bilz vibration isolation platform Several precision vices Clamping plates Clamping technology and other accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Scope of Delivery: ZEISS O-INSPECT 442 coordinate measuring machine Original ZEISS control panel 2 Industrial PCs 2 Monitors ZEISS CALYPSO 2019 measuring software Original software media Original ACRONIS recovery/boot media Documentation Reference standard ZEISS measuring probes and styli Several measuring adapters Original ZEISS accessory case Bilz vibration isolation platform Several precision vices Clamping plates Comprehensive clamping and holding devices Other accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: as good as new (ex-display), Year of construction: 2016, In the client's order: Measuring range: (X; Y; Z) 300 x 300 x 200 mm Measurement uncertainty: MPE_E = (1.9 + L / 250) μm Software: Calypso 5.8 Highlights Isdpjdyqtqjfx Agyebc • Tactile scanning sensor VAST XXT: low probing forces, smallest Tastkugel- diameter, many measuring points by means of Scanning for shape testing • Lens ZEISS Discovery: large, directory-free field of view • white light sensor. Allows the measurement to be smaller and more sensitive Non-contact workpiece surfaces Optically and tactilely, ZEISS O-INSPECT offers premium sensors for top performance. Fully in 3D, without compromise in the software. The software ZEISS CALYPSO not only provides results in a simple way, it also makes it easier to identify and communicate causes of errors. • Reference software ZEISS CALYPSO: Live image and result in a view 3D CAD capability, fits • integrated pallet receiving system with Interface to the automatic temperature measurement ### Symbol image is the property of the manufacturer ###

Condition: refurbished (used), Used 3D CNC coordinate measuring machine. ZEISS Eclipse 7.7.5 – fully modernized in 2026 with a new UCC-S3 controller, PH10M rotary-swivel system, joystick box, SP25 scanning probe, and a PC with RationaDMIS 3D software. Further details available upon request Measuring range X = 700 mm - Y = 700 mm - Z = 500 mm Ibedpfx Agey Nzr Tsyjc Price: upon request ᐳᐳᐳ One-of-a-kind item - while available ᐸᐸᐸ Request our detailed quote. Of course, we provide all services such as installation, maintenance, service, training, programming, etc.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 153888, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, workpiece weight (max.): 20 kg, total height: 1,770 mm, type of input current: DC, total width: 1,351 mm, total length: 1,055 mm, year of last overhaul: 2022, ambient temperature (max.): 35 °C, ambient temperature (min.): 17 °C, Equipment: lighting, For sale: Optical-Tactile Measuring Machine The device is in excellent condition and has been serviced regularly and professionally. Calibration certificates are available. Technical data: Measuring range: 400 mm x 400 mm x 400 mm Year of manufacture: 2011 Sensor technology: Optical: ZEISS Discovery zoom lens Tactile: VAST XXT probing system Software: ZEISS CALYPSO Additional software: CALYPSO Freeform Surface BasLic; dongle-based basic license for the current software version Accessories: • Computer, mouse, keyboard, monitor • Smooth calibration sphere (for tactile probe) • Matte calibration sphere (for white light interferometer) • Calibration standard – optical • Calibration standard – tactile • 3 probes: reference probe, 3x50, 1x20 with 30 mm extension • DAkkS calibrated in 2022 • Software: Calypso 2019 dongle license • Tactile probe head • Optics • White light interferometer Iodpfx Asylkfaogyobc • 3-position probe change rack • Operating manual • Additional software: CALYPSO freeform surface, BasLic, dongle-based basic license for the current software version Transport and loading can be organized on request, at an additional cost, Europe-wide. Prices are subject to VAT. Viewing by appointment possible. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase & Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Gjbn N Ay Dowza Dxogoil Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to get in touch, please visit our website.

Year of construction: 2022, condition: good (used), Year of manufacture: 2022 Serial number: 3849016657 Reference: 431030-9040-000 Previously serviced/supplied by Mikroskop-Center.de, Germany The system is in very good cosmetic condition and has been set up and tested for digital imaging. The Axiocam 305 Color camera is recognized by ZEISS ZEN software and live imaging is functional, as shown in the pictures. The microscope is configured for both transmitted light and fluorescence applications and is suitable for cell culture, biological research, routine microscopy, and fluorescence imaging. Configuration includes: - ZEISS Axio Vert.A1 inverted microscope - ZEISS Axiocam 305 Color digital camera - Fluorescence illumination module - Fluorescence filter positions: Ibjdpfx Aoz Eztdogyoc - DAPI - GFP - Cy3 - BF / Brightfield - ZEISS LD A-Plan 5x / 0.15 Ph1 - ZEISS LD A-Plan 10x / 0.25 Ph1 - ZEISS LD A-Plan 20x / 0.35 Ph1 - ZEISS LD A-Plan 40x / 0.55 Ph1 - Phase contrast system - Mechanical specimen stage - Binocular observation head - Lenovo ThinkPad laptop - ZEISS ZEN 3.14 / ZEN Lite installed - Camera connection cable - ZEISS accessories and documentation shown in the pictures