Used Zimmer Group Fgr1050 for sale (3,723)

Condition: good (used), “Partially unpacked for photography – unused item from a warehouse clearance.” Quantity: 2 available Rjdpszg Ig Asfx Abhow ZIMMER GROUP Axle balancer FGR1050

Condition: as good as new (ex-display), DES190 + MSM031C-0300-NN-M0-CH0, Zimmer-Group, AC servo motor and rotary module Model: AI00367288 + R911325139 Redovrf D Hjpfx Abhew Type: DES190 + MSM031C-0300-NN-M0-CH0 Condition: As good as new

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003584 - Manufacturer Code: LCP2505AK-08 - Condition: As new (display item) - Functionality: Fully functional - Compatible Machine: - If interested, we offer overhaul service, please contact us. 1KG 20X20X20 Redeyrn Sqopfx Abhew

Condition: new, width of the strips 150 mm Rjdpfxjyv Nb Ne Abhew band length 2000 mm band speed 16,5/33 m/sec total power requirement 2,6/3,37 kW turning speeds 1400/2800 U/min weight of the machine ca. 95 kg Equipment / Accessories: - Removable dust catcher - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad

Condition: new, capacity 90 degrees: round 125 mm capacity 90 degrees: square 125x125 mm Rjdoyv N Ezjpfx Abhsw capacity 90 degrees: flat 130x125 mm 80 mm 80x80 mm 80x80 mm capacity 60 degrees: round 80 mm capacity 60 degrees: square 50x50 mm capacity 60 degrees: flat 80x80 mm sawband speed 30-80 m/min. dimensions of saw-band 1440x13x0,65 mm 190 mm output 230 V weight of the machine ca. 19 kg Domestic equipments: - Stepless speed regulation - Saw arm can be swiveled up to 60 ° right - Tape guides with 8 ball bearings - with stop

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Movable panel (workpiece), movable working head Numerical Control POWERCONTROL + POWERTOUCH Software woodWOP Safety cabin (enclosure) of the working head No. 1 Workpieces fixing clamps (for the panels introduction in the working area Panels feeding by motorized chain/track Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 850 x 56 Total installed power (Kw) 11,5 (ca.) WORKING GROUPS: No. 1 Drilling head (power Kw 2.3) with vertical spindles - No. 13 Independent vertical boring spindles (V13 High Speed) - No. 6 Independent horizontal boring spindles (4 in X + 2 in Y) No. 1 Circular Grooving Saw (on X axis) dia. (mm) 100 No. 1 Vertical electro-spindle (HKS63) power Kw 5 Automatic Tools Changing System - Tools storage plate (No. 4 folds-positions) Rsdpoyywcvofx Abhsw

Year of construction: 2017, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE FOR TUBES WITH LOADING/UNLOADING SYSTEM MIN CIRCULAR SECTION: ø 25 mm MAX CIRCULAR SECTION: ø 355 mm MAX SQUARE SECTION: 260 X 260 mm MAX RECTANGULAR SECTION: 300 X 200 mm MAX ADMITTED LOAD: 100 Kg/m SOURCE: IPG YLS-4000 ; 4000 W Rjdpfex E Eihsx Abhjw CONTROL UNIT: SIEMENS 840D WEIGHT: 12500 Kg NOTE: AUTOMATIC LOADING 3-12.5 mt; AUTOMATIC UNLOADING 12.5 mt; 3D CUTTING HEAD; CAPACITIVE SENSOR; AUTOMATIC ADJUSTMENT

Condition: used, Year of construction: 2000, Diesinking / EDM Travel distance X: 825 mm Travel distance Y :680 mm Redovtfn Uepfx Abhow Travel distance Z: 405 mm table size X: 1200 mm table size Y: 850 mm max. workpiece weight: 3000 kg electrode changer: 50 - time Generator POCON 60 Quill holder: EROWA heavy duty adapter O module halogen light

Condition: used, Year of construction: 2002, Diesinking / EDM Rsdpsvtfn Iefx Abhjw Travel distance X: 350 mm Travel distance Y :250 mm Travel distance Z: 315 mm table size X: 576 mm table size Y: 400 mm max. workpiece weight: 500 kg C-axis quill chuck: EROWA

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, input frequency: 50 Hz, working width: 1,200 mm, For sale: Throughfeed drilling and dowel inserting machine LAZZONI Group – model Next 2+3K, designed for efficient series production of furniture components. The machine is equipped with automatic infeed and outfeed of workpieces, allowing for single-operator use and significantly reducing production costs. Key Information: Manufacturer: Lazzoni Group Model: Next 2+3K Year of manufacture: 2018 Control: PLC + operator panel (HMI) Functions: Drilling + automatic dowel insertion Working width: 230–1200 mm Working height: 10–22 mm Working depth: 40–260 mm Power supply: 400 V / 50 Hz Installed power: 9.1 kW Machine weight: approx. 2900 kg CE certificate Working Configuration: - Number of heads: 5 - 2 side heads - 3 top heads Rjdeywxy Rjpfx Abhjw - Total number of spindles: 35 (7 spindles per head) - Spindle pitch: 32 mm - Throughfeed operation – ideal for repeatable parts Automation and Ergonomics: - Infeed magazine - Outfeed magazine (no need for a second operator) - Automatic dowel insertion - Fast retooling/changeover - Stable and repeatable operation for large production runs Applications: - Drawer side production - Furniture carcass components - Fronts, sides, rails - Ideal for both large factories and smaller businesses focusing on automation The machine is in good working condition, has been used in serial production, and is available for inspection onsite. Loading assistance available. Location: Elbląg Net price: 25,000 PLN

Condition: new, A first in Turkey; Our company carries out the production of the machines that enable the production of single-layer insulated panels, under our own patent and license. Our sandwich panel machines operate in 30 different regions of the world. Single layer insulated panels are also called economical eco sandwich panels. Please contact us for additional information and technical documents. Rjdpfof Nqlqex Abhjw

Condition: new, New Technology Trapezoidal Sheet Roll Forming Machine consists of these parts; Hydraulic Roll Opening and Roll Loading Trolley, 10 T Polyethylene Protective Film Coating Unit, Metal Sheet Aligning Unit, Metal RollForm Generating Unit, 18 & 36 Stations According to Form Type, Flying Continuous Length Sizing Shear Unit, Automatic Stacking and Packaging Unit, Automatic Siemens Electric Control Unit. All of our machines have CE MARKING. Please contact us for additional information and technical documents. Rodof Nqghopfx Abhsw

Condition: new, Fully automatic roof tile machines with metal presses in tile appearance in desired sizes; Please contact us for additional information and technical documents. Rsdpfx Aef Nqi Ijbhjw

Year of construction: 2016, condition: ready for operation (used), - USED - CO2 TUBE LASER CUTTING MACHINE WITH LOADING/UNLOADING SYSTEM MAX CUTTING THICKNESS: 16 mm mm MIN CIRCULAR SECTION: 80 mm MAX CIRCULAR SECTION: 610 mm MAX SQUARE SECTION: 400x400 mm MAX RECTANGULAR SECTION: 500x300 mm SOURCE: ROFIN DC045 ; 4500 W CONTROL UNIT: SIEMENS 840D Rsdpfx Abeytkdlshsw WEIGHT: 100000 Kg ACCESSORIES: FUME EXHAUSTER NOTE: LENGTH OF LOADING BAR MIN.4.000-MAX 18.000 mm; LENGTH OF UNLOADING BAR MIN. 3.000 - MAX 12.500 mm; SHORT PIECE UNLOADING LENGTH UP TO 3.200 mm; 3D HEAD; CAPACITIVE SENSOR; AUTOMATIC SETTINGS; BOOSTER; FOCUS AUTOMATIC ADJUSTMENT

Condition: new, TURBO-BOOST-TEST turbocharger boost testing bench allows for professional turbocharger calibration and performance evaluation. The test bench can be used in turbine tuning and refinement, in the manufacture of hybrid turbines, to test changes in turbine performance after tuning. Our test benches are advanced systems for turbocharger tuning and testing in dynamic mode. Its provide turbocharger testing under near realistic operating conditions, ensuring full process control and detection of any potential problems, including oil leaks. HIGHLIGHTS • Complete finish testing and tuning of automotive turbochargers for engines up to 3 liters • Dynamic turbocharger testing • Installation on the regular surfaces of fastening • Running in and check on an oil leak • Tuning of electronically driven turbos is done by connecting to an external tester ATP-3000 • Installation of turbochargers of any design KEY FEATURES Redpfottg S Usx Abhjw • More than 2000 turbo references database • Calculate turbocharger performance; • Plot supercharging vs. inlet and outlet flow graph; • Generating the resulting graph; • Testing of actuator performance: vacuum, pneumatic and electric types; • Diagnosis of servo-drives of electric actuators (optional); • All measurements are done in real time. • Calibration of the test bench before starting work • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Boost Test software. • Creation and printing of reports on the tuning process. • Self-diagnostics SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1330 х 770 х 1440 mm Weight 265 kg

Condition: new, DRIVESHAFT BALANCING MACHINE BVI-03-88 Balancing machine for professional repair of cardan shafts up to 200 kg. The hard-bearing machine is adapted for heavy cardan shafts of trucks and special machinery. The high sensitivity of the supports allows also high-quality balancing of cardan shafts of passenger cars. The machine is designed for balancing cardan shafts in the facilities of cardan repair workshops. The machine can be quickly reconfigured for balancing a large amount of single cardan shafts of various designs, as well as for the production of small batches of shafts. . . . TWO TIMES faster then your machine. This balancing machine is majored to balance the shaft not only qualitatively, but also quickly. If you can balance in 2-2.5 times faster, then this is your real competitive advantage. . .. ... HIGH PERFORMANCE ACCESSORIES The machine is equipped with three main types of adapters: 1. Fast clamping universal adapters. It has two main advantages: The first is that due to the special design the driveshaft flange is clamped within 5 seconds. This advantage is due to the fact that the driveshaft flange does not need to be fixed with bolts. THE SHAFT CAN BE CLAMPED 4 TIMES FASTER WITHOUT BOLTS. The second advantage is the centering rings. The driveshaft is mounted in the adapters with centering rings that can be made on an ordinary lathe to fit most common driveshafts. 2. KV Flange adapters. Used for balancing shafts with cross-tooth flanges. Applies to four flange sizes: 120, 150, 180, 205 mm. Usually used on truck driveshafts. 3. Adapter with slots. Used to mount various flanges with holes. Mounting the driveshaft is the same as on universal adapters, with the help of centering rings. Rsdpon E Skwefx Abhjw KEY FEATURES • Balancing of 2, 3 and 4-support cardan shafts • Shaft length up to 5200mm, weight up to 200kg • Cardan installation in 1 minute • Standard set of adapters - Installation of 80% of cardan shafts; • Three ways of fixing the center bearing • Hard-bearing type machine - safe balancing of shafts with large initial unbalance • Machine is operated by one worker • Sliding tailstock spindle - quick changeover, comfortable operation • Safety bracket with clamp for quick installation • Measurement in all planes at one time • Calibration of the machine by the operator • Displays imbalance in real time • Create and print reports SPECIFICATIONS Maximum cardan shaft weight 200 kg Maximum flange diameter 300 mm Maximum length of cardan shaft 5200 mm Number of machine supports 4 Number of simultaneously measured planes 2, 3, 4 Minimum achievable residual specific imbalance, 10 g mm/kg Rotor speed range 1000-2500 rpm Parameters of the supply network 380V, 3 Ph, 50Hz Power consumption, minimum, 3 kW Dimensions (length x width x height) 6000 х 1100 х 1450 mm Weight 1100 kg

Condition: excellent (used), Year of construction: 2015, operating hours: 26,407 h, functionality: fully functional, We offer for sale a fully automatic circular saw BLM Group ADIGE EM80, suitable for precision cutting of tubes and profiles in series production. The machine is equipped with Siemens Sinumerik CNC control and an automatic material feeder, enabling efficient and repeatable manufacturing. Rsdjzgvk Nspfx Abhsw Technical data: Year of manufacture: 2015 Control: Siemens Sinumerik Power supply: 38 kW Voltage: 380 V / 50 Hz Weight: approx. 8,500 kg Operating hours: approx. 26,400 h Cutting range: tubes Ø 10–80 mm Max. part length: 600 mm Ideal for serial production of short parts Equipment: Automatic feeding system Full machine enclosure Multiple tool positions Set of clamping jaws (see photo) High-speed, high-performance saw suitable for series production, offering high productivity and cutting accuracy. Test operation possible by appointment.

Condition: new, 400 x 32 mm capacity 90 degrees: round 145 mm capacity 90 degrees: square 130 x130 mm capacity 90 degrees: flat 300 x 80 mm capacity 45 degrees: round 105 mm capacity 45 degrees: square 115 x 115 mm capacity 45 degrees: flat 250 x 60 mm total power requirement 1,8 kW weight of the machine ca. 240 kg dimensions of the machine ca. 800 x 1100 x 1400 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right Rjdpfx Aeyv Nhpjbhjw - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet

Year of construction: 2026, condition: new, ⭐️ Four-Post Car Workshop Lift ⭐️ Redpfx Aow Ta I Tsbhjw TM-GROUP 4SF-4000B 4 Tons Automatic FOR WHEEL ALIGNMENT / FOR GEOMETRY HIGH-QUALITY OIL AND INSTALLATION KIT INCLUDED FREE Specification: ✅ Manufacturer: TM-GROUP ✅ Maximum lifting capacity: 4 tons ✅ Type: Automatic ✅ Connection: Bottom ✅ Power supply: 400V (optional 230V) ✅ Lifting time: 60 seconds ✅ Lifting height: 1750 mm ✅ Limit switch: Yes ✅ Motor power: 2.2 kW ✅ Telescopic rolling jack arms, allowing lifting of the vehicle also under the sills ✅ Expansion plates (with locking option) ✅ Turntable slots ✅ Self-lowering ramps ✅ Automatic locks lowering to create a blocking threshold for the vehicle ✅ Anchors included: Yes ✅ Hydraulic oil 10L: free ✅ Meets requirements for UDT certification: Yes ✅ Ramp length: 4250 mm ✅ Ramp width: 918–1118 mm Is this lift for me❓ The automatic four-post lift is suitable for servicing almost any passenger car, from a 2-door coupe to large 4x4 off-road vehicles. The 4000 kg (4T) capacity also allows lifting smaller delivery vans. The lift ensures full service and repair capability for vehicles of larger dimensions and weight. What about the repair range❓ Our lift is perfect for work related to wheel alignment and geometry, suspension repairs, as well as engine or gearbox servicing. The high lifting (175 cm to the tire base – practically higher by half the wheel diameter) allows for any inspection. Documentation: The lift is delivered with the necessary documentation: ✅ Declaration of conformity with CE certificate ✅ User manual in English ✅ Automatic rolling jack FREE❗

Condition: good (used), Year of construction: 1994, functionality: fully functional, Technical details table length 840 mm table width 600 mm ampere 60-120 A total power requirement 15-23 kVA weight of the machine ca. 2,75 t dimensions of the machine ca. 2760 x 1110 x 1840 m Additional information With controlled C-axis and 16-position tool changer. WORKTABLE Table size: 840 x 600 mm Dielectric above table: 360 mm Maximum workpiece weight: 1000 kg T-slots: 4 x 10 mm Distance table to quill without chuck (max / min): 595 / 180 mm WORKHEAD X - Y travel: 565 x 400 mm Rjdpfxszdq Uds Abhew Z travel: 415 mm X - Y - Z resolution: 0.001 mm C-axis resolution: 0.001 deg. Rapid traverse speed: 800 mm/min Max. electrode weight without rotation: 100 kg Max. electrode weight with rotation: 15 kg DIELECTRIC SUPPLY Tank volume: 400 liters Paper candle filters: 4 pieces GENERATOR Dimensions (height x width x depth): 1800 x 600 x 920 mm Weight: 300 kg Rated current: 60 – 120 A Power rating: 15 – 23 kVA Dimensions (height x width x depth): 2760 x 1110 x 1840 mm Weight: 2750 kg

Condition: ready for operation (used), Year of construction: 2015, number of axes: 4, Two Wire EDM machines manufactured in 2015 and 2019. These 4 axis ZK Genius 700 (2015) + ZK Genius 700 (2019) + Chameleon- Quad (2015) features a travel distance of 400 x 350 x 350 mm and a table size of 575 x 500 mm, accommodating workpieces up to 700 kg. Includes a controlled C axis and rotary spindle, along with a CO/2 Kraft & Bauer fire extinguishing system. Consider the opportunity to buy this ZK Genius 700 (2015) + ZK Genius 700 (2019) + Chameleon- Quad (2015) wire EDM machine. Contact us for further details. • 1x ZK Genius 700 (2015) — 22,056 hours • 1x ZK Genius 700 (2019) — 8,255 hours Rjdpfxsyip Ars Abhow • Table size: 575 x 500 mm • Max workpiece weight: 700 kg • Generator power: 96 A • Controlled C-axis and rotary spindle • C module (for carbide, PCD, or dressing) • O module (for very fine surface roughness) Additional equipment • CO/2 Kraft & Bauer fire extinguishing system • Extraction device • CIMCO Editor for path erosion • 1x Chameleon Quad (2015) automation: • 176 electrode slots • 9 UPC pallet slots with loading drawer • Double rotary gripper for Erowa ITS • Single gripper for UPC pallets

Condition: refurbished (used), Year of construction: 2014, operating hours: 20,000 h, DG Tech – Authorized BLM Group Inspection Center DG Tech was established as a spin-off from DGService to specifically address the market for used BLM Group machines. Leveraging our experience in after-sales service and continuous technical training, we offer a comprehensive and reliable service. Rjdpfx Aezhw H Iobhow We manage the evaluation, purchase, and refurbishment of machines, including laser source maintenance, ensuring high-quality standards. We handle logistics, disassembly, and transportation directly, eliminating the risks associated with private sales. In partnership with BLM Group, we provide dedicated software, technical training, and post-sales support. We also offer flexible operational leasing solutions to optimize investment and productivity. Configuration: BEAM LOADER L=6500mm, UNLOADER 4500 mm, ROFIN DC 020 LASER SOURCE, CHILLER, LT120 EXHAUST SYSTEM, LT120 WELDING SEARCH OPTICAL SYSTEM, INTEGRATED MICRODOSING.

Condition: used, 612435.1, 20 ADVANCED, MS Ultrasonic, Ultrasonic Generator Model: 612435.1 Type: 20 ADVANCED Condition: Used Redpfx Abot Tw Shjhew

Condition: used, 7001481, 20 ADVANCED, MS Ultrasonic, Ultrasonic Generator Model: 7001481 Type: 20 ADVANCED Rjdpfx Abst Txayehew Condition: Used

Condition: new, capacity 90 degrees: round 150 mm capacity 90 degrees: square 140x140 mm capacity 90 degrees: flat 150x140 mm 100 mm 90x90 mm 100x90 mm capacity 60 degrees: round 70 mm capacity 60 degrees: square 65x65 mm capacity 60 degrees: flat 65x70 mm dimensions of saw-band 1735x13x0,65 mm cutting speed 30-80 m/min engine output 1,5 kW 150 mm weight of the machine ca. 37 kg dimensions of the machine ca. 900x460x500 mm Rjdpfsyv Niaex Abhjw