3.8 kVA generator

Makita G4300IS

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 200300381, total length: 5,220 mm, workpiece weight (max.): 3,000 kg, Glass Washing Machine Bavelloni LV1604-20 Operating direction: right to left Illuminated discharge area for quality control. 3 washing zones, each with its own water tank: - First tank for brush pair No. 1 is electrically heated and filled with detergent/water mixture. - Second tank for brush pair No. 2 contains cold water for rinsing. - Third tank is for washing zone 3, equipped with spray nozzles for rinsing with pure water. A drying zone follows, utilizing air nozzles powered by a fan. The machine is designed for glass heights up to 1600mm but is open at the top, allowing the transport of taller glass panes. Dujdsvkxzpepfx Ag Rsl Glass thickness: up to max. 20mm Infeed section length: 1400mm; main machine length: 1820mm; outfeed section length: 2000mm. Automatic stop of the feed rollers when the glass reaches the end of the outfeed section. Operating manual, spare parts list, and wiring diagram are available. The machine has been regularly maintained and is operational; it will be dismantled in calendar week 31/32 of 2025. For further details and dimensions, please refer to the photos or feel free to inquire. Demonstration and inspection can be arranged by appointment. Dismantling, loading, and transportation should preferably be organized by the buyer, but can be handled by us upon agreement. A forklift and various assisting tools can be provided. All information and dimensions have been provided to the best of our knowledge and belief, but no guarantee is given for completeness or accuracy! Subject to prior sale. Sold without any warranty or guarantee, as viewed.

Condition: new, Year of construction: 2023, ENERGY T20000 20.00 KVA/16 KW At 400V 20,00 KVA /// 16 KW At 230 V 16,00 KVA /// 12,8 KW 255 KG L= 970mm W= 680mm H= 955mm Giri/min - speed 3000 Dsdpfxjipvhks Ag Reul Frequency Hz 50 Voltage 230/400 V Amps 32.0A at 400V 70A at 230V GASOLINE (EURO V) Electric start engine power hp (KW) 32 (23,8) Cylinder 2 Cooling system air Protective measures Low oil level Speed governor mechanical Fuel consumption 75% of load Lt/h 9.8 Tank capacity Lt 65 Voltage control AVR Voltage accuracy % ± 1% * 2 CEE socket 32A 3pole 230V single phase * 1 CEE socket 32A 5pole 400V three phase * 1 12V DC * Voltage selector switch (400V three-phase or 230V single-phase) * LED multimeter: Voltmeter, amperometer, KWmeter, frequency meter and hour meter. Power unit stands on 2 sturdy wheels and 2 legs, and can be moved with them. The handles can be folded to save space. Emergency gensets of the ENERGY Thunder series are not suitable for continuous operation! However, an emergency supply can be established without any problems! ENERGY T20000 Full Service Kit € 78.00 incl. 20%. * Worldwide transport incl. unloading is possible for an additional charge * An invoice with VAT will be issued

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, For sale is a lathe of the brand Weiler type Primus LZ-GS The machine is in very good condition Technical data Year of construction 1989 Machine no. 4443 Operating voltage 380 V Center height 120 mm Center width 430 mm Speed:60 - 3000 rpm in 18 gear stages Spindle clearance 23 mm Short taper spindle head DIN 55027 Tailstock MK 2 Feed rates from 0.03 to 0.15 mm /rev Possible threads metric, inch, module and diametral pitch Metric thread pitches from 0.25 to 2.5 mm Length 1.2 m, height 1.3 m, depth 0.65 m Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Dusdpfsihig Iex Ag Rsl Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: Duodpfx Aeiyyndjg Rol > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 565 kg, fuel type: diesel, tank capacity: 38 l, color: beige, power: 12.06 kW (16.40 HP), output current: 21 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 11.6 kW (15.77 HP), nominal power (apparent): 15 kVA, continuous power: 10.4 kW (14.14 HP), continuous power (apparent): 13 kVA, total length: 1,850 mm, total width: 850 mm, total height: 900 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, AKSA AP 15 Perkins PRP output: 10.4 kW / 13 kVA ESP output: 11.6 kW / 14.5 kVA Engine: Perkins 403A-15G1 Dodpfx Agewu Dbuj Rjul Emission level: Stage 2 Speed: 1,500 rpm Mechanical governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford or equivalent Voltage: 400/231 V Voltage regulator: AS540 Control panel: DSE 6120 – emergency automatic start Battery charger: 5 ampere Type: Canopy unit; weatherproof, soundproofed Emergency stop switch Radiator with mechanical fan Base frame construction with integrated fuel tank (38 L) and vibration dampers Coolant preheating Voltage and frequency regulation according to ISO 8528-5 Unit suitable for stationary use only Please note that, in accordance with the applicable EU regulation, these units are not approved for mobile use. The units are sold as B-stock. B-stock means the units may show cosmetic defects such as minor rust, or rust on the housing. These defects do not affect the functionality or performance of the units in any way. By accepting this offer, you expressly acknowledge the described characteristics and the associated condition of the units.

Condition: like new (used), functionality: fully functional, overall weight: 749 kg, fuel type: electric, total length: 2,765 mm, total width: 1,346 mm, total height: 1,435 mm, power: 37 kW (50.31 HP), volume flow: 6.6 m³/h, pressure (min.): 5 bar, pressure (max.): 12 bar, ambient temperature (max.): 50 °C, noise level: 61 dB, type of cooling: water, Year of construction: 2023, machine/vehicle number: APP876730, The Atlas Copco E-Air H250 VSD is a single-stage, oil-injected screw compressor driven by an Atlas Copco electric motor with class H insulation and a speed of up to 9000 rpm. Unique to this new range is the PACE functionality in conjunction with the intuitive XC2003 control system. This ground-breaking technology enables multiple pressure and flow settings, allowing you to adjust the airflow and pressure to suit the requirements of your application. Dedpjud H Tnofx Ag Rjul The E-Air VSD motor is characterized by its compactness, energy efficiency and quietness. In addition, the compressors are easy to install and operate. No exhaust fumes, unrivaled performance, low noise level. A plug-and-play design also allows you to transport the E-Air anywhere. Warranty for demonstration unit: 12 months from delivery Scope of delivery of the compressor: - Integrated permanent motor from Atlas Copco - Soundproofed HardHat hood - Cooling circuit with aftercooler - Air and compressed air connection - Air/oil separator and control systems - Leak-proof frame made of ASTM A653 Zincor sheet steel with powder coating - Closed floor pan - Undercarriage/chassis with fixed drawbar and hydraulic brakes - Overrun and parking brake, automatic reverse, star wheel - Truck DIN towing eye (40 mm), car coupling enclosed loose - 205R14C wheels for trailer operation - Lighting and operating license according to StVZO

Year of construction: 2006, condition: good (used), Power generator, emergency power generator, generator, power generator, power generator, emergency power generator -Soundproofed Dodpfx Agecgan As Reul -Power: 7.0 kVA 50 Hz -Petrol engine: Honda -2x: Schuko 230 Volt -1x: 380 Volt power outlet -1x: Charging cable, 12-volt socket -Dimensions of unit: 590/780/H750 mm -Weight: 136 kg

Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Dusdpfjtyy Sfex Ag Rjl Price is for each machine, NOT for the package. Package is 15% discount. Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's.

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 Dujdpfxocggy Sj Ag Rel - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: excellent (used), Coating and packaging line with thermo-shrinkable film, consisting of: Dsdpogp Diasfx Ag Rsul a) Double conveyor belt (mm 3000 x mm 1100) for application of corner protections. - Adjustable feeding speed from 3 to 15 m/min. b) Stretch wrapping machine Mod. Compact 250/6R with motorized conveyor belt - Total length of the machine (with motorised belt) mm 7600 approx. - Reel holder (6 upper reels max width mm 2450 + 6 lower reels max width mm 1450) - Slitter and transversal welding machine (mm 2500) - Max useful height mm 700 - Installed power KW 12 - With automatic device to pack light pieces (from 1 to 5 Kg) by welding bar c) Shrinking tunnel total length about 4700 mm (of which about 3700 mm are of the tunnel) with hot air circulation (heating by electric resistances and fan), total installed power KW ? - conveyor with metal rods (width mm 1500 approx.) - Max useful height mm 700 - Adjustable feed speed from 4 to 20 m/min d) Outlet roller conveyor "ELME" (idle rollers) for cooling (mm 3000 x 1500 ca.)