Telescopic loader

Manitou MRT 2150 P

Condition: new, machine/vehicle number: wtcs750s, Westtech Woodcracker CS750 Smart - available immediately Equipment: - Tiltator can be rotated continuously - Cutting diameter: 750 mm - Grab opening width: 1,280 mm - Own weight (basic - fully equipped): 820 - 980 kg - Recommended liter output: 65 - 110 l/min - Recommended operating pressure: 230 -280 bar - Service weight of carrier vehicle: 15 - 30 t - Saw box: actively suspended - Chain lubrication of saw: grease - Optional: Power tiltator can be rotated continuously Available in multiples / fits perfectly with Magni RTH 6.30 SH & Magni RTH 6.35 SH. Can also be offered in conjunction with a Magni. Also fits Merlo. Nsdpfsiady Eox Aa Djwb We are an official Westtech Woodcracker sales and service partner, Magni telehandler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range for you!

Condition: used, functionality: fully functional, power: 124 kW (168.59 HP), operation weight: 17,150 kg, Year of construction: 2010, operating hours: 13,000 h, Equipment: air conditioning, gripper hydraulics, hammer hydraulics, Caterpillar M316D mobile excavator Year of manufacture: 2010 13,000 operating hours 17,150 kg 124 kW CAT 6-cylinder engine 250 cm track width 20 km/h Oilquick OQ70/55 fully hydraulic quick coupler Air conditioning Nodpfoxq A D Rex Aa Dowb All lines included

Condition: used, Telescopic loader Haulotte HLT 3614 Year of construction 2012 Lifting height 13.60 m Lifting capacity max. 3.6 tonnes Operating hours approx. 3950 hours Dead weight 12,400kg Deutz TCD 2012 L04 2Vm engine with pallet fork Tyres very good The offer is aimed exclusively at traders within the meaning of §14 BGB Nwjdovzmq Hspfx Aa Djb no sale to private customers!

Condition: new, machine/vehicle number: 1, empty load weight: 7,500 kg, maximum load weight: 22,500 kg, overall weight: 30,000 kg, axle configuration: 2 axles, loading space length: 10,070 mm, loading space width: 252 mm, loading space height: 85 mm, suspension: air, tire size: 245.70 r 17,5, color: yellow, Year of construction: 2022, Equipment: ABS, tail-lift, 10.70m new ceylan 2-axle truck 2 axles, 1st liftable and 2nd steerable, ebs, air suspension, 8 ton side rud hooks cad1, pier seats and slots in dock x belt anchorage, 4.0m total electro hydraulic double ramps, h.from ground platform 85cm, platform length 7.0m, WARRANTY and READY FOR DELIVERY SAFETY, INTERDRIVE SRL-PARMA CONCESSIONARIA Njdpsh Utdlefx Aa Dswb

Condition: new, Year of construction: 2025, -Custom-Made Machines Tailored to Your Production Needs -Our custom-made machines are meticulously designed and engineered to meet the unique demands of your production processes. Whether your focus is finishing, oxide removal, or radius edge rounding, these machines deliver outstanding precision and performance. -Finishing: Achieve smooth, high-quality finishes on a wide range of materials, ensuring a consistently professional, polished appearance -Oxide Removal: Effectively eliminate surface oxides to provide a clean, contaminant-free surface—essential for further processing or coating applications. -Radius Edge Rounding: Precisely round edges to your specified radius, enhancing both safety and the overall quality of your finished products. Customization Options Each machine is tailored specifically to your requirements, offering flexibility in: Processing Speeds: Adjustable to match your varying production demands Special Features: Options include dust and fume extraction systems, adjustable pressure settings, and programmable configurations designed to optimize your workflow Nwedpfx Aohq Dbxea Dob Built for Durability. Constructed with longevity in mind, our custom machines are built to perform reliably through extended production cycles. Whether for small-scale projects or high-volume industrial applications, these machines provide exceptional results, year after year

Condition: used, machine/vehicle number: YV2JSW0C08A67xxxx, mileage: 4,48,556 km, Year of construction: 2008, Please contact ATS Norway for more information Please provide reference number upon request: 21171 Specifications – Car: 2008 model EU-approved until: 31.01.2027 Odometer reading: 448,556 km I-Shift automatic transmission Power: 480 hp / 353 kW Drivetrain: 6x2 Euro 4 engine Front suspension: steel Rear suspension: air Tires (see pictures) Total length of the platform with full extension: 7.442 m Hydraulic extension: 1.5 m Foldable side doors Nox sensor recently replaced Central lubrication Air conditioning / AC Radio Extra lights   Specifications – Crane: 2008 model 370.11/8S Certified until: 05/2026 All bearings in the crane joints have been recently replaced 8 hydraulic extensions 1 manual extension Winch is disconnected (defective) 4 support leg Remote control Ready for delivery   Description: Nwsdpfjw Sc Rusx Aa Dsb Volvo FM480 crane truck with 37 tm Effer crane (both 2008 model) for sale. The crane has had its bearings replaced in all joints and is ready for use. The winch is disconnected due to a fault. The car otherwise functions as it should according to the owner. Faults and defects may occur, and some additional costs must be expected. The crane truck is ready for delivery. Km: 448556 HK: 480 Technical approved: Yes EU-approved until: 31.01.2027 Own weight: 18000 Total Weight: 28000 Payload: 9925 Width: 255 Length: 1040 Euro: 4 Model: FM480 kranbil m/2008, 370.11/8S Effer kran SE VIDEO Gearbox: Automatic

Condition: excellent (used), Year of construction: 2014, Datron M8 Cube with rotary swivel table (4th + 5th axis) HSC Pro control V9 Nwodpfx Aex Rpl Doa Djb Year of manufacture: 2014 Machine operating hours: approx. 8,800 hours 2kW HF spindle, 6,000 rpm up to 60,000 rpm with direct shank tool clamping system HIB HF spindle cooling unit 15-position automatic tool changer 3D probe Renishaw Precision tool length probe Microjet minimum quantity lubrication system with 4-nozzle spray unit Vacuum table with 500mm x 500mm working area 1 x T-slot plate 1 x short-stroke clamp 3-fold vacuum distributor The machine is in very good condition. The machine can also be purchased without the rotary swivel table (4th + 5th axis).

Condition: new, functionality: fully functional, Year of construction: 2024, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: simplex, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift rotatable Mast type: Quattro Condition: New machine Technical condition: New Front tires type: Air Nsdpfx Ajw Eqdkoa Dewb Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Description: The vehicle is UVV - checked. A&M pallet fork carrier set including pallet forks 1200mm, pallet fork carrier plate 1500mm and load hook 5t. 3rd valve, 4th valve, heating, STVZO, full cab, CE certificate, 3rd valve 4th valve heating STVZO full cab CE certificate TÜV Dekra approval 20 km/h 45 % limited slip differential on the second axle 2 front swivel LEDs on the cab 2 rear swivel LEDs on the cab Set of additional platforms for outriggers Wheel set 455/70 Michelin standard fork carriage plate Remote control with 2 joysticks Automatic alignment of the wheels Kit for driving with upper carriage rotation of 180 degrees Wired reversing camera Three-sided personnel basket 120 x 240 cm, cable winch 5.0 to. to be mounted on the fork carriage. including workman basket and cable winch

Condition: used, pressure 75 t stroke 250 mm daylight longitudinal/sideways 800 x 215 mm dayligth 170 - 885 mm working pressure 7,5 - 8.5 bar weight of the machine ca. 0,45 t Nwedpfeupxr Ujx Aa Dsb dimensions 1,2 x 0,8 x 2,1 mm Hydraulic/pneumatic workshop press Cylinder can be moved sideways pneumatic foot pedal Winch for table height adjustment 2 pcs. pressing blocks CE marking

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, pipe diameter (max.): 38 mm, pipe length (max.): 3,700 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 180 °, bending radius (min.): 60 mm, working width: 3,700 mm, number of axes: 5, working height: 1,500 mm, overall weight: 2,700 kg, total length: 5,500 mm, total width: 1,800 mm, total height: 1,800 mm, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, 5 Axis 38 CNC Mandrel Pipe Bending Machine – PUMA Liv Makina’s 5-axis, 38 mm CNC mandrel pipe bending machine is among the most referenced machines across four continents, especially in the Automotive, White Goods, and Defense Industries. Its Solidworks-compatible interface ensures highly user-friendly operation. Our Industry 4.0-ready machine provides daily reporting directly to users. With its rolling die, the machine can coil the pipe similar to a spring. Its ability to mount dies with 3 different radii allows for easier handling of complex bends. The collision simulation software enables you to preview bends on-screen prior to production, saving time and increasing efficiency. This software is offered free of charge on all our CNC tube and profile bending machines for our valued customers. Key Features: - Import drawings directly from Solidworks - Fully automatic and manual mode operation via interactive PLC control system - Multiple language support - 3D visualization of created programs - 3D collision simulation for pipe bends - Automatic pipe length calculation - CE-compliant - On-screen error display - Integrated safety warning system - User-friendly Livmak interface Nwodpfx Asw Hpfcsa Djb Technical Specifications – PUMA 5 Axis 38 CNC: - Maximum Bending Capacity: Ø38 mm x 2 mm - Minimum/Maximum Die Diameter: 60 / 250 mm - Material Processing Length: 4000 mm - Machine Dimensions: 5500 x 1600 x 1600 mm - Total Motor Power: 15 HP - Machine Weight: 2.5 tons