Telehandler / Telescope Forklift

Manitou MT625 T Comfort

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 5 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 4,710 kg, total length: 3,894 mm, drive type: Diesel, construction width: 1,813 mm, Telescopic handler, rigid frame Load center: 500 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: New Technical condition: New Front tire type: Pneumatic Front tire size: 12 R Front tire condition: 80 - 100% Rear tire type: Pneumatic Hjdpfxszgpbbo Akrenu Rear tire size: 12 R Rear tire condition: 80 - 100% Description: The MT 625 H telescopic handler is designed for use on construction sites for new builds and for renovation work on low-rise buildings. The compact machine, 1.80 m wide and less than 2 m high, easily passes through doors and can maneuver well on congested construction sites. Its turning radius of 3.30 m and the 3 available steering modes ensure excellent maneuverability. This telescopic handler is easy to operate and is equipped with an ergonomic dashboard and the JSM joystick, which guarantee easy maneuverability. The MT 625 H has a lifting capacity of 2.5 t and a lifting height of 5.85 m. Its 75 hp engine enables a speed of 25 km/h. Maintenance work is facilitated by the large opening of the engine hood. The 90-liter gear pump enables simultaneous movements of the boom and the telescope, thus increasing productivity. 3rd valve, full cab, CE certificate.

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 95 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,960 mm, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift, rigid Hsdezrcu Ejpfx Akrjnu ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Telescopic Condition: Like new Technical condition: Very good Front tire type: Pneumatic Rear tire type: Pneumatic Rear tire condition: 80 - 100 % Rear work lights, front work lights, heater, full cabin, CE certificate, safety light, exterior mirrors, joystick, windshield wiper,

Condition: new, Year of construction: 2025, Equipment: all wheel drive, soot filter, Manitou MT625 H Comfort 75K ST5 S1 Telehandler 2.5t 6m The MT 625 H telehandler is designed for construction site applications in new building projects as well as renovation work on low-rise structures. This compact machine, just 1.80 m wide and under 2 m in height, easily fits through doorways and can navigate congested job sites with ease. Its turning radius of 3.30 m and three steering modes ensure outstanding maneuverability. The telehandler is user-friendly, equipped with an ergonomic dashboard and the JSM joystick for precise and simple operation. The MT 625 H offers a lifting capacity of 2.5 t and a maximum lift height of 5.85 m. Its 75 hp engine provides a top speed of 25 km/h. Maintenance tasks are simplified by the wide engine bonnet opening. The high-capacity 90-l gear pump enables simultaneous movement of the boom and telescope, enhancing productivity. Max. load capacity: 2,500 kg Max. lift height: 5.85 m Max. reach: 3.40 m Breakout force with bucket: 3,427 daN Overall length with fork carriage: 3.83 m Length to front of forks: 3.90 m Overall width: 1.81 m Overall height: 1.92 m Wheelbase: 2.30 m Hnjdsxmqt Espfx Akrou Ground clearance: 0.33 m Cabin width: 0.79 m Upward tilt angle: 12° Downward tilt angle: 117° Turning radius (over tyres): 3.31 m Weight: 4,800 kg Tyres: SKS532 12-16.5 Engine: Kubota Stage V, Tier 4 final Engine model: V3307-CR-TE5B Number of cylinders/displacement: 4 - 3,331 cm³ Engine power (hp/kW): 75 hp / 55.40 kW Max. torque / engine speed: 265 Nm @ 1,400 rpm Tractive force: 3,550 daN Transmission type: Hydrostatic Number of gears (forward/reverse): 2 / 2 Max. travel speed: 20 km/h Automatic negative parking brake Parking brake: oil-immersed disc brakes on front axle Hydraulic pump type: gear pump Hydraulic flow/pressure: 90 l/min - 235 bar Hydraulic oil capacity: 115 l Fuel tank capacity: 63 l Steering wheels (front/rear): 2 / 2 Drive wheels (front/rear): 2 / 2 Errors and prior sale excepted. Internal vehicle number: R122 WhatsApp support available! If you have any questions about the vehicle or would like more information, feel free to message us on WhatsApp. WhatsApp WhatsApp

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/5 Belt width: 500 mm Centre distance (A-A): 5,000 mm Hnedew Ad Rrspfx Akrou Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: worm gear motor Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.1 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 450 kg Machine colour: RAL 6009 Fir green Suitable for the following bulk materials, among others: Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: new, empty load weight: 850 kg, maximum load weight: 2,650 kg, overall weight: 3,500 kg, loading space length: 5,400 mm, loading space width: 2,070 mm, tire size: 195/50R13C, Alufelgen, Felge schwarz, Car transporter or multi-transporter from the manufacturer HULCO model CARAX-3 3500 540x207 Go-Getter. The standard equipment of the Hulco GoGetter car trailer includes an aluminum floor, black side panels, black aluminum rims, storage box, LED lights, three-axle trailer, lashing eyes on the outside of the frame, slide-in ramps under the loading area, sloping rear, low chassis, sturdy welded steel frame, support wheel and a V-drawbar. Hnsdpfx Akeq Rczgerju We also offer accessories for Hulco car transport trailers such as high tarpaulin, wheel stopper, support set, car lashing straps and lock.

Condition: used, Year of construction: 2023, load capacity: 1,500 kg, lifting height: 4,300 mm, fork length: 1,100 mm, total length: 4,560 mm, · Max. Tragkraft 1500 kg · Max.Hubhöhe 4.30 m · Maximale seitliche Reichweite 2.62 m · Reichweite bei max. Hubhöhe 1 m · Ausbrechkraft mit Schaufel 1880 daN · Shipping mass (min. / max.) 2700 kg / 2900 kg · Radstand 2.13 m · Gesamtlänge bis Gabelträger (mit Anhängerkupplung) 3.47 m · Gesamtlänge bis Gabelträger (ohne Anhängerkupplung) 3.47 m · Überhang vorne 0.77 m · Schüttwinkel 116 ° · Kippwinkel 23 ° · Wenderadius (über Räder) 2.62 m · Reifenmodelle CAMSO - MPT 552 - 10.0/75-15.3 124A8 · Heben 8.80 s · Senken 7 s · Teleskop ausfahren 6.40 s · Teleskop Einfahren 4.30 s · Ankippen 3.40 s · Auskippen 2.60 s · Hersteller Yanmar · Motornorm Stage V / Tier 4 final Hedpfx Aksxd Hmijronu · Motor Modell 3TNV88C-DMU · Anzahl der Zylinder - Tragfähigkeit der Zylinder: 3 - 1642 cm³ · Nennleistung Verbrennungsmotor / Leistung (kW) 35.10 Hp / 26.20 kW · Max. Drehmoment / Motordrehzahl 105 Nm @1950 rpm · Wendelüfter Option · Kühlsystem des Motors: 3 Kühler (Wasser + Hydrauliköl + Kraftstoff) · Getriebetyp Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 · Max. Fahrgeschwindigkeit (kann je nach Vorschriften variieren) 25 km/h · Differenzialsperre: Sperrdifferenzial an Vorder- und Hinterachse · Parkbremse: Automatische negative Parkbremse · Festellbremse: Hydraulische Servobremse · Pumpenart: Zahnradpumpe · Hydraulikfördermenge - Hydraulikdruck: 48 l/min - 235 bar · Flow Sharing Standard · Hydrauliköl 39 l · Fassungsvermögen des Kraftstofftanks 35 l · Innenschallpegel (LpA) gemäß Norm NF EN 12053 geprüft:76 dB · Außenschallpegel (LwA) 104 dB · Vibrationswert an Händen/Armen < 2.50 m/s² · Sicherheit Zulassung der KabineKabine ROPS - FOPS Stufe 1 · Steuerungen JSM

Condition: used, Year of construction: 2022, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,145 mm, ・Maximale seitliche Reichweite: 3.40 m ・Ausbrechkraft mit Schaufel: 3427 daN ・Kippwinkel 12 ° ・Schüttwinkel 117 ° ・Wenderadius (über Räder) 3.31 m ・Eigengewicht (mit Gabel) 4800 kg ・Bereifung: Pneumatisch ・Heben 8 s ・Senken 5.40 s ・Teleskop ausfahren 5.60 s ・Teleskop Einfahren 4.30 s ・Ankippen 3.50 s ・Auskippen 3.60 s ・Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 3331 cm³ ・Nennleistung Verbrennungsmotor - Leistung (kW) 75 Hp / 55.40 kW Hedpfx Aoztgl Dekrenu ・Max. Drehmoment / Motordrehzahl 265 Nm @ 1400 rpm ・Zugkraft 3550 daN ・Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 ・Max. travel speed 24.90 km/h ・Parkbremse Automatische negative Parkbremse ・Festellbremse Ölbad Lamellenbremsen an den Vorderachsen ・Pumpenart Zahnradpumpe ・Hydraulikdruck 235 bar ・Motoröl 11.20 l ・Hydrauliköl 115 l ・Fassungsvermögen des Kraftstofftanks 63 l ・Geräuschpegel im Fahrerstand (LpA) 76 dB ・Umgebungsgeräusch (LwA) 104 dB ・Schwingungsbelastung Hand/Arm < 2.50 m/s² ・Lenkräder (vorne / hinten) 2 / 2 ・Antriebsräder (vorne / hinten) 2 / 2 ・Sicherheit / Sicherheit Zulassung der Kabine Standard EN 15000 / Kabine ROPS - FOPS Stufe 1 ・Steuerungen JSM

Condition: new, functionality: fully functional, empty load weight: 794 kg, maximum load weight: 2,706 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 4,685 mm, loading space width: 2,090 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, MARTZ GT Tilting Trailer 480/3 P 3.5T NEW VEHICLE NEW SERIES Internal dimensions: 468.5cm x 209cm Total weight: 3500Kg Payload: 2700Kg Braked tridem trailer Overrun brake and parking brake by AL-KO 3x 1350Kg axles and brake with automatic reversing function Low chassis Fully welded, hot-dip galvanized steel frame Hedpfsxp U S Rex Akrenu Loading platform hydraulically tiltable 11-degree approach angle No ramps required 15mm thick, robust and non-slip screen-printed wooden floor Automatic jockey wheel with 400Kg support load Numerous lashing eyes along the entire length Reinforced 10" C tires with steel valve M+S tires 13-pin connector Side marker lights at the front Rear lights with reversing light and triangular reflectors Lights and license plate holder are foldable Winch with brake and mounting bracket 2x wheel chocks OPTIONAL ACCESSORIES WITH PERMANENT PRICE REDUCTION FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Complete LED lighting -Theft protection -Full aluminum floor made of Alupanel panels -Aluminum floor with wooden support -Anti-sway coupling -2 wheel stops for perforated steel track -Wheel stops across the entire width Further accessories on request! Plus freight to Gera and vehicle registration document €400 net Images are for illustrative purposes and may show optional accessories that incur an additional charge. Have you not yet found the right trailer? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open from 8:00 AM to 5:00 PM on weekdays for all kinds of repairs. Specialist in axle repair, also for caravan trailers. In addition, we have a large selection of spare parts and accessories, also for trailers from various manufacturers. With us, you will also find a variety of rental trailers. Visit us online or come by directly.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 15 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: electric, mast type: telescopic, construction height: 1,920 mm, power: 40 kW (54.38 HP), fork length: 1,200 mm, empty load weight: 4,755 kg, total length: 3,894 mm, drive type: Elektro, construction width: 1,813 mm, Telescopic forklift, rigid frame – Electric Load center: 500 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Hnodpfx Akozif N Hjrju Condition: New Technical condition: New Front tire type: Non-marking Front tire condition: 80 – 100% Rear tire type: Non-marking Rear tire condition: 80 – 100% Battery voltage: 100V Battery capacity: 348Ah Battery manufacturer: Manitou Battery type: Lithium-ion Battery year of manufacture: 2026 Battery condition: 80 – 100% Description: Manitou telescopic handler 625, 100% electric. The first 100% electric Manitou telescopic forklift, specifically designed for use in the construction industry! A compact, versatile machine for all your material handling applications, which is quiet and emission-free without compromising on performance. With a lifting height of 5.85 m, a load capacity of 2.5 t, a ground clearance of 33 cm, combined hydraulic movements, and compact dimensions, the MT 625 e is a true off-road machine, also suitable for work on compact, low-emission construction sites, such as in city centers or indoors. Equipped with lithium-ion batteries and an integrated charger, you can add an additional battery and charger to increase on-site autonomy and charge your equipment faster. 3rd valve, work lights rear, work lights front, heater, full cab, air conditioning

Condition: used, Year of construction: 2012, operating hours: 11,850 h, pressing force: 88 t, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), For sale used baler + used conveyor brand: HSM VK 88 + Stadler KF1800 Baler is VK 88 R – FU, Frequency drives, 2 x 45 kw. * Unblocking cylinder option * Ball joint fixing main ram cylinder * Stadler conveyor 1600 mm internal Year 2012 11850 hours Rod main cylinder and seals kit new. To be replaced : 2 front chamber floor section : middle and front to the channel Greasing / changing: Few sides diabolos are used and running, some rusty, some in good condition. Baler is running good and bales tying is ok Ram wheels OK Ram side wheels OK Rod main cylinder : almost new Main cylinder seals kit : almost new Ram sides nylon strips : 80 – 90 % good. Finetune the geometry adding spacers ( customer has parts on stock) Knife/ counter knife : good, 70% Needles wheels : ok but change is preferred + the closing plates Main frequency drive 1 of 2 : in total 2 x 45 kW : one is out of order. I don’t know if it will be changed or not. Baler is running on one pump. Side walls chamber : Side walls are worn out where the nylon guiding plate are sliding : few millimeters up to 2 mm average. Conveyor : Hedpeyuyg Sefx Akronu Chain rollers are used with a bit of play. Greasing is missing but still good condition. Guiding strips are ok Feeding cleats are worn out, almost all. Start/stop with frequency drive. Side walls ok on incline part and in pit. Wire coils platform : Not included.