Tractors (haulers)

Massey Ferguson 7716 Dyna-6

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 7,010 h, power: 198 kW (269.20 HP), motor manufacturer: John Deere, gearing type: automatic, fuel type: diesel, maximum speed: 40 km/h, first registration: 02/2019, color: original, overall weight: 16,000 kg, front tire size: 610/70R30, rear tire size: 710/70R42, total height: 3,800 mm, total width: 3,000 mm, number of previous owners: 1, Equipment: additional headlights, air conditioning, cabin, compressed air brake, cruise control, differential lock, fridge, front linkage, front power take-off, hydraulics, lighting, non-smoking vehicle, rear power take-off, seat heater, trailer coupling, We are selling our John Deere 7270 R tractor. The machine has been very well maintained and is in perfect technical condition. Features: - Ultimate Edition - AutoPowr transmission 40 km/h, stepless - 10-inch Command Center display with video function - StarFire receiver - AutoTrac - JD Link - Command Center 4600 processor - CommandView III cab with premium equipment - Premium radio package Itsdpfxoyx Arao Acroh - Premium lighting package - Leather comfort package with heated seat - Refrigerator - Electrically adjustable exterior mirrors - AutoPowr with left-hand reverser - Hydraulic pump 223 l/min - 5 double-acting super deluxe spool valves - Rear PTO 540E/1000/1000E - Rear linkage 7,847 kg, Cat III - 3-in-1 drawbar with automatic hitch and K80 ball coupling - Load Sensing - Front linkage with front PTO 1000 rpm - TLS Plus front axle with all-wheel drive - Adjustable rear axle 120 mm - Immobilizer with coded keys - Electric multifunction joystick - Rear wheel weights, cast rims The turbocharger was replaced in October 2025.

Condition: new, power: 10.3 kW (14.00 HP), fuel type: gasoline, Brugger HX10 shredder - Powerful, compact and versatile! The Brugger HX10 shredder is the ideal solution for all gardening professionals and hobby gardeners who are looking for a powerful yet maneuverable shredder. With its powerful 14 hp petrol engine and robust design, the HX10 effortlessly shreds branches and trunks with a diameter of over 10 cm. Whether in private gardens or on larger sites - this shredder brings power to every corner! Thanks to its narrow design, the HX10 is perfect for use in confined areas. The device can be easily adjusted by hand and maneuvered with ease, allowing you to work efficiently even in difficult garden areas. With a width of just 80 cm, the HX10 can get through any garden gate. Your advantages at a glance: - Powerful: 14 hp petrol engine for powerful shredding - Effective: Processes branches and trunks up to a diameter of over 10 cm - Compact and maneuverable: Narrow design for easy maneuvering in small spaces Iodjumv E Hepfx Acrjth - Easily adjustable: Flexibly adjustable for comfortable working - Perfect for horticulture: Ideal for use in private and professional gardens The Brugger HX10 - your all-purpose weapon for efficient garden maintenance! Technical data: Dimensions: 140 x 80 x 165cm (l x w x w) Weight: 185 kg Blades: 2, 30cm wide Max. Diameter: 10cm Processing/h: 4-6m3/h Feed hopper: 51 x 42 cm --- All prices plus VAT. Contact us for a customized offer!

Condition: used, Pillar drilling machines Itedpfeb N Ezrsx Acroh

Condition: ready for operation (used), For sale: Fully operational Fastrac 7,950 operating hours Isdjywnqfopfx Acrjth Year of manufacture: 2000 Vehicle inspection needs to be renewed Private sale

Condition: used, Year of construction: 2013, front tire size: 600/70R30, rear tire size: 710/70R38, Equipment: compressed air brake, i-Monitor 2 LED/xenon working lights Hydraulic pump 160 l/min / Rütll/bheiz ISOBUS parallel driving system Agrosky Article 3445629 / Ijdpfxjr Nxyde Acrjth

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of manufacture 1977 Drilling capacity: 32 mm Spindle taper: MT 3 – short quill Distance spindle nose – table: 545 mm (short quill) Distance spindle adapter – table: 395 mm (MT adapter) Throat: 290 mm Quill stroke: 160 mm Table size: Ø 545 mm Column diameter: 220 mm Spindle speed: 55 – 1450 rpm, stepless Motor power: 1 / 1.6 kW Supply voltage: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds and stepless through variable-speed drive - Intermediate gear stage for high torque at low speeds - MT adapter from MT3 to MT4 Ijdjharwvspfx Acroth - Automatic feed 0.1 – 0.2 – 0.3 mm/rev - Swiveling drill table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Space required (L x W x H): 1150 x 650 x 2000 mm Weight: 850 kg Good condition

Condition: used, operating hours: 22,327 h, Fiat-Hitachi Fh 220 | Used Tracked Excavator | 22327 hours 📍Location: Germany, Meppen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 15000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 63 inspection points 37 approved ✅ 19 imperfect ℹ️ 7 issues ⚠️ 📌 Inspector's Comment: Heavily used machine. Air conditioning not available. Windshield wiper is defective. Ventilation of the hydraulic oil is defective. Operating hour meter is defective; no reliable information available. Track shoes can be cut at an additional cost to reduce transport width. The year of construction is unknown and cannot be verified. The operation manual states 1980 or 1990, but this cannot be confirmed. The operating hour meter is from another machine, the displayed hours are incorrect. The machine has possibly between 20,000 and 30,000 hours. The cabin has been replaced and is not original. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39638 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Itodpox N Havofx Acrjh 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2026, A550 Fully Automatic Solid Wood Saw 9 m Fully automatic cutting of medium-large wood with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Your fully automatic saw can optionally come as an inline optimiser saw. For every piece of wood you place down to cut, no matter what length, a laser sensor will measure its length. Our powerful optimisation algorhithm then takes your cut list and calculates the best order of parts to cut from this wood so that wastage is minimised. All of this happens on-the-fly, during the machine operation process, and without needing any input from you. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and wood feeding rates for maximum process productivity. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Itjdpfef Ekngex Acroh Highly suitable for: • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk wood cutting Model: A550 Length: 9 m Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: excellent (used), Year of construction: 2016, 1. Gas burner WEISHAUPT WM - G30 - 3800 kW, with gas line Dungs DN 65 Output: 400-3800 kW Design: ZM-LN Year of manufacture: 2016 Isdjwg Hkcjpfx Acreth 2. Gas burner WEISHAUPT WM-G30/2-A - 4100 kW, with gas line DUNGS DN65 Output: 450-4100 kW Design: ZM Year of manufacture: 2010 3. Gas burner WEISHAUPT G50/1-B - 4000 kW, with gas line DUNGS DN65 Output: 550-4000 kW Design: ZM-NR Year of manufacture: 2004

Condition: excellent (used), power: 112 kW (152.28 HP), Year of construction: 2023, operating hours: 2,198 h, Equipment: air conditioning, cabin, CATERPILLAR M317-07B year: 2023 operation hours: 2.198 hrs. ROPS Iodpeyi Tp Nofx Acrjth Airco Radio Back and Side camera hydr. 2 piece boom stick: 2,50 meter all hydr. lines (hammer-, gripper-, scissor-) Quick coupler OQ70/55 1 x Bucket central lubrication tyres 10.00-20 approx 40% good blade support CE Engine with 112kW operation weight: 18.4 to.