Vertical machining center

MAZAK VTC 20 C

Condition: good (used), Year of construction: 1998, Vertical Machining Center Mazak VTC-20C The machine is in fully operational condition and has undergone comprehensive service maintenance. You are welcome to inspect it. In 2025, the spindle of the MAZAK VTC-20C was overhauled. Please find some key details from the technical specification below. If you require any additional information, please do not hesitate to ask. Specification | Value ---|--- X-axis travel | 1,660 mm Y-axis travel | 510 mm Z-axis travel | 510 mm Distance from table surface to spindle nose | 180–690 mm Distance from column front to spindle centerline | 550 mm Working table area | 2,000 × 510 mm Maximum table load (uniform load) | 1,000 kg Spindle speed | 40–7,000 rpm Spindle motor power – 10 min rating | 11 kW Spindle motor power – 30 min rating | 7.5 kW Spindle motor power – continuous | 5.5 kW Spindle taper | 7/24 taper No. 40 X-axis rapid traverse | 24,000 mm/min Y-axis rapid traverse | 24,000 mm/min Z-axis rapid traverse | 20,000 mm/min X-axis cutting feed rate | 1–5,000 mm/min Y-axis cutting feed rate | 1–5,000 mm/min Z-axis cutting feed rate | 1–5,000 mm/min Tool magazine capacity | 24 tools Tool selection system | Tool holder No. fixed-address system (automatic short-cut system) Tool shank | NT-40 Pull stud bolt | Yamazaki-made ANSI type Maximum permissible tool diameter | Ø80 mm Maximum tool diameter with adjacent pocket empty | Ø110 mm Maximum permissible tool length | 350 mm (from gauge line) Maximum permissible tool weight | 8 kg (including tool shank and pull stud bolt) Maximum total tool weight in magazine | 96 kg (average 4 kg × 24 tools) Machine weight | 7,215 kg Hedpfx Aijvurd Eersw Machine height from floor | 2,701 mm Required floor area | 4,000 × 2,990 mm

Condition: good (used), refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, refrigeration machine, refrigeration unit -Manufacturer: VEB, refrigeration compressor cooling unit complete -Type: K 1.6 H 200.2 / DK1.6H200.2-2.7 -Power: 290 W -Voltage: 220V Hodjupbdaspfx Airew rating pressure: 15.2 bar -Technical data: see photos type plate -Total dimensions: 480/300/H245 mm -Weight: 22 kg

Condition: used, Year of construction: 1997, x-travel 1660 mm y-travel 510 mm z-travel 510 mm Control M+ Mazatrol Table dimensions 2000x510 mm table load max. 1.000 kg number of spindle speeds 7.000 UpM tool taper SK 40 Hedpfx Aiozwqcnsrjw tool piece magazine with 48 Stück weight of the machine ca. 7.500 kg

Condition: new, Generally overhauled machine Price: 6.000EUR Spiral mixer Capacity: 75 kg flour Kemper Dough capacity: 120 kg Stainless steel bowl Voltage: 380V / 50Hz / 3 N/PE Hedox N Edtopfx Airjw

Condition: new, Spiral dough mixer Container capacity (capacity): 40 liters Spiral mixers are intended for professional use in the field of bakery and catering They are used for the preparation of primary dough, but can also be used for the preparation of other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger quantities of dough continuously They consist of a bowl for ingredients and a mixing tool (spiral) Specification of Electric Dough Mixer Flour Capacity: 16 kg Bowl Capacity: 40 liter Mixing Speed: 150/200 r/min Bowl Speed: 15/20 r/min Voltage: 220V/380V 50Hz Electric Power: 3 kW Hsdpfx Aisuu Ef Sorew Machine Size: 800x480x1000 mm

Condition: new, PRICE: 1900 EUR Spiral dough mixer Container capacity (capacity): 60 liters Spiral mixers are intended for professional use in the field of bakery and catering They are used for the preparation of primary dough, but can also be used for the preparation of other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger quantities of dough continuously They consist of a bowl for ingredients and a mixing tool (spiral) They have a digital control panel with a display, two independent electric motors with two speeds and counter directions that move the vessel and the spiral, as well as a built-in timer Specification of Spiral Mixer single phase Bowl Capacity: 60 liters Hodex U Efbspfx Airsw Electric Power: 3kW Machine Size: 840x480x1000mm

Condition: excellent (used), 1 x Revent 626 Rack oven. Hodpfx Aov Iy Rmjirjw

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 104605-104645, input voltage: 400 V, total width: 1,500 mm, total length: 4,500 mm, total height: 2,820 mm, type of input current: three-phase, Fortuna Primus K4 – 4-row roll divider – rounder + depositor + GEK, year of manufacture 2011 Dough divider & rounder Condition: fully functional, directly from ongoing operation Application: round rolls, e.g., Kaiser rolls, braided rolls, salt rolls, wheat & mixed doughs Hodpfey St U Sox Airjw • Weight range: approx. 40-110/120 g • Hourly output: approx. 4,800 pieces/hour • Rounding chamber height: approx. 10–35 • Rounding speed: scale 0–30 • Hopper volume: 20–25 kg • Dough yield: TA 160–165 • Connection power: approx. 1.5 kW • Machine weight: 650–700 kg • Depositor: for 60 × 80 cm trays (58–78) _____ Equipment • Fortuna Primus K head machine • 4 rows • GEK pre-fermentation cabinet matching the line • Rounding/stamping sets: Kaiser rolls, braided rolls, salt rolls • Complete depositor • Immediately ready for operation • In use until recently • Clean, well-maintained, regularly serviced • No known defects • Electronics modernized (new display) INSPECTION and TRIAL RUN possible (only) by appointment Freight possible, fully assembled with a jumbo truck (L/W/H = approx. 4,500 mm x 1,500 mm x 2,820 mm)

Condition: excellent (used), Year of construction: 2006, For Sale: A reliable Yamazaki Mazak Nexus VCN-510C vertical CNC machining center—a high-end production machine from the renowned Japanese manufacturer MAZAK, valued for its precision, durability, and stable operation in industrial manufacturing. The VCN-510C is ideal for machining steel, aluminum, and workpieces that require high accuracy and repeatability. Thanks to the MAZATROL 640M control system, the machine offers intuitive operation and quick production setup. Technical Specifications: Year of manufacture: 2006 Control system: MAZATROL 640M X-axis travel: 1,050 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Hodpfx Aoyha Iveirsw T-slot table Automatic tool changer (ATC) Central lubrication Control cabinet Weight: 7,100 kg Very low operating hours!!!!!

Year of construction: 1987, condition: excellent (used), Manufacturer MAHO Type MH 800 T year of construction 1987 control Heidenhain TNC 355 technical data Working range X way 800 mm Y path 450 mm Z path 500 mm Table rigid angular table 900x600 mm Workpiece weight max 800 kg working spindle 63-3150 u/min Machine dimensions length 3817 mm width 3937mm Hsdpfx Aslzkdleirjw height 2047 mm Weight 4100 kg