Guide and feed spindle lathe stepless.
MCM Italy TC 300 x 1500

Name: MCM Italy TC 300 x 1500
Brand: MCM Italy
Availability: InStock

Condition

New

Location

Mindelheim Germany

Guide and feed spindle lathe stepless. MCM Italy TC 300 x 1500

Machine data

Machine type:: Guide and feed spindle lathe stepless.

Manufacturer:: MCM Italy

Model:: TC 300 x 1500

Condition:: new

Price & Location

Location:: Biberkopfstraße 4, 87719 Mindelheim, Deutschland

Call

Details about the offer

Listing ID:: A4039522

Update:: 07.10.2024

Description

Made in Italy.

Maximum turning height: 300 mm
Turning diameter over bed: 600 mm
Turning diameter over slide: 380 mm
Distance between centers: 1,500 mm
Bed width: 400 mm
Spindle bore: 82 mm
Spindle nose: Camlock 8"
Spindle speeds: (12) 16 - 1200 rpm
Motor power: 9.2 kW (optional equipment / standard: 7.5 kW)
Feed rate, Z-axis: (93) 0.028 - 6.43 mm/rev
Feed rate, X-axis: (93) 0.012 - 2.73 mm/rev
Threads, metric: (54) 0.5 - 224 mm
Threads, Whitworth: (55) 72 - 1/8 TPI
Dodpod Nk Ncefx Al Ajck
Threads, module: (54) 0.5 - 112 mm
Threads, diametral pitch: (54) 64 - 1/4 D.P.
Cross slide travel: 340 mm
Top slide travel: 150 mm
Tailstock ram diameter: 85 mm
Tailstock ram travel: 200 mm
Tailstock taper: MK 5
Weight: approx. 3,200 kg

Equipment:
- 3-axis digital readout
- Automatic lubrication of the guideways
- LED lighting
- Micrometer bed stop
- 9.2 kW motor instead of 7.5 kW
- Quick-change tool holder system Multifix with 4 inserts
- Tailstock movement pneumatically assisted
- Mechanical dual clutch
- Electromagnetic brake
- Rapid traverse for X and Z axes
- Electrical equipment made of high-quality brand components, e.g., Siemens/Schneider
- Lubrication of the guideways via hand pump
- Reducing sleeve
- 2 fixed centers
- All safety devices according to CE standards: chuck guard with Plexiglas panel, secured by microswitches. Tool holder guard with Plexiglas panel. Rear splash guard over the entire length. Lead screw and feed screw protection by light curtain (integrated into the emergency stop circuit). Emergency stop button.
- Chip container on wheels
- Electric coolant system
- Fixed steady rest
- Follower steady rest
- Operating tools, acceptance test report according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to CE standard in the latest version

EMO special price including 3-axis digital readout.

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2013

182 listings online

Call

Send inquiry

Telephone & Fax

+49 8261 ... show

These listings may also fit your interest.

Listing

Soerendonk

7,100 km

Lathe
NHH

€3,250

Fixed price plus VAT

Call

Listing

Voumard grinding spindles, REFU HF frequency converter Voumard Schleifspindeln REFU HF

Pfaffenhofen

6,857 km

Voumard grinding spindles, REFU HF frequency converter
VoumardSchleifspindeln REFU HF

Call

Condition: used, Year of construction: 1992, spindle speed (min.): 7,500 rpm, spindle speed (max.): 24,000 rpm, 4 motorized grinding spindles (liquid-cooled, purge air / oil mist lubrication) including REFU HF frequency converter, e.g. for powering the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Converter 316/25 High-frequency converter (inverter, frequency inverter) Frequency converter / inverter for powering motor spindles GMN tool spindle, motorized grinding spindle The spindles are fully functional, sold as is – manufacturing year approx. 1992 A collection of various grinding spindle shafts / arbors for grinding wheels is available for these spindles and can be purchased separately. Price / details on request Dcsdpfx Ajl Tn Afol Aok All technical data subject to error or omission. We sell exclusively to countries within the European Community.

See details

Listing

Gantry crane Sky Hall Crane Demag - Portalkran KBK 125KG Kettenzug KBK 1 KBK1 12x3,5m NL 125Kg + Zubehör

Gondelsheim

6,880 km

Gantry crane Sky Hall Crane
Demag - Portalkran KBK 125KG KettenzugKBK 1 KBK1 12x3,5m NL 125Kg + Zubehör

€2,150

ONO plus VAT

Call

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF-KBK1, DEMAG KBK crane sky crane track dimensions approx. 12m x 3.5m Please inquire about other dimensions! Payload / lifting load 125 KG - 0.125ton Technical data of the system: Djdspiarnspfx Al Ajck Crane track made from Demag KBK1 rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drag, power supply, holders/suspenders etc. including 1 bridge with 125KG Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please ask for your crane runway with cantilever capacity and dimensions.

See details

Listing

Lathe-conventional-electronic WEILER MATADOR VS

Ahaus

7,000 km

Lathe-conventional-electronic
WEILERMATADOR VS

Call

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions Dcodpfxoxacirj Al Aok

See details

Listing

Metal cutting circular saws Bernardo CS 315 H

Mudersbach

6,933 km

Metal cutting circular saws
BernardoCS 315 H

€2,380

ONO plus VAT

Call

Condition: new, Bernardo Manual Metal Cut-off Saw CS 315 H Dedpfxjd Id Ugj Al Asck Technical Specifications Saw blade diameter 315 x 40 mm Speed 19 / 38 RPM Maximum clamping capacity (open) 150 mm Working height 920 mm Motor output S1 100% 0.75 / 1.5 kW Motor input S6 40% 1.0 / 2.1 kW Voltage 400 V Machine dimensions (W x D x H) 530 x 1000 x 1740 mm Weight approx. 235 kg Solid material, round 90°: 80 mm 45°: 70 mm Pipe, round 90°: 80 mm 45°: 70 mm Profile, square 90°: 80 x 80 mm 45°: 70 x 70 mm Solid material, square 90°: 80 x 80 mm 45°: 70 x 70 mm Profile, rectangular 90°: 90 x 80 mm 45°: 80 x 70 mm Solid material, rectangular 90°: 90 x 80 mm 45°: 80 x 70 mm Features Gear head for slotting, swivels 90° to the left and right Removable coolant tank integrated in the robust base frame Gearbox with hardened and ground worm shaft and bronze worm gear Safety guard opens automatically during cutting Precise, 4-way guided, self-centering double clamping vice Ergonomically shaped handle with push-button for fatigue-free sawing Low saw blade speed (19 / 38 RPM) ideal for cutting solid materials Reduction gearbox runs quietly in an oil bath Scope of supply Coolant system with filter Self-centering vice Base frame

See details

Listing

San Giovanni In Marignano

6,563 km

Used parallel lathe
SibimexCU500MT

Call

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 300 mm, spindle bore: 100 mm, turning diameter over bed slide: 500 mm, center height: 250 mm, center width: 400 mm, turning length: 2,000 mm, quill travel distance: 230 mm, total length: 3,600 mm, total width: 1,250 mm, total height: 1,400 mm, spindle speed (max.): 1,400 rpm, metric thread steps: 120, overall weight: 3,100 kg, three-jaw chuck diameter: 315 mm, Used traditional parallel lathe Sibimex CU500MT in excellent condition, ideal for mechanical workshops, industrial maintenance, metal fabrication, and precision machining. Dsdpfx Aloym Ut Dj Aeck Solid, reliable machine, always carefully maintained. Sturdy cast iron frame, smooth slides, and precise mechanics. Perfect for those looking for a ready-to-use solution without investing in a new machine. Key features: * Excellent overall condition * Precise and reliable mechanics * Ready for immediate use * Ideal for machining shafts, flanges, bushings, and single parts * Perfect for small to medium production or maintenance Machine is operational and can be inspected by appointment. No urgent work required. Testing on site available.

See details

Listing

Bühl

6,917 km

Center Lathe
HEYLIGENSTAEDT400 Ea/4000

Call

Condition: used, Year of construction: 1957, turning diameter over bed 800 mm turning diameter over slide rest 540 mm turning length 4000 mm centre height 400 mm centre distance 4000 mm spindle turning speed range 9 - 1140 U/min spindle passage 96 mm weight of the machine ca. 8,5 t Dedpfsxwp Ehex Al Aock dimensions of machine L x W x H 7,0 x 1,70 x 1,70 m - with gap with insert - Accessories: 3-jaw chuck FORKARDT 400 mmø, 4-jaw chuck 500 mmø, faceplate 800 mmø, DRO on X-and Z-axis ACU-RITE, MULTIFIX-head with various inserts, 2 solid steadies, 1 running steady, running center, coolant

See details

Listing

Bühl

6,917 km

Center Lathe
WEIPERTWG 425

Call

Condition: used, greates pass round over bed 480 mm swing diameter over bed slide 300 mm turning length 1500 mm centre height 240 mm centre distance 1500 mm spindle bore 42 mm Dsdpfetqqx Ajx Al Ajck spindle turning speed range 14 - 1400 U/min total power requirement kW weight of the machine ca. 2,4 t dimensions of machine L x W x H 3,00 x 1,05 x 1,40 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head, running center

See details

Listing