VERTICAL LIFT

LTG-TOWERMAX 18.0-170-2448-816-7510

Condition: good (used), Year of construction: 2001, Good, used condition. Few operating hours (1675 hrs). Motor: 11 kW. Throughput up to a maximum of 220 kg/h. Briquettes: 150x60 mm. Press dimensions: Gedpfowcc D Rox Ah Dskf approx. 2200x3000x1920 mm (LxWxH). Control cabinet dimensions: 500x1250x2120 mm (LxWxH). Weight approx. 3000 kg.

Condition: reconditioned (used), Modernized machines with the new LTG StoreControl L control system External dimensions: Gksdpfx Ahsn D A Rro Dsf Height 6,000 mm Width 1,630 mm Depth 2,980 mm 30 beams, each with a payload of 500 kg with the clear usable dimensions: W = 1,300 mm D = 863 mm H from 50 to 750 mm Total payload up to 40,000 kg Start of the access opening at 870 mm above the top floor, then 845 mm high Color: GRAY/BLUE, beams sendzimier-galvanized Surface cleaned, signs of wear possible Performance values Vertical drive 1 x 2.2 kW / 400 volts Horizontal drive 1 x 0.29 kW / 400 volts More Extras: Hand-operated lift door Subject to errors, technical changes, and deviations from photos. Delivery and installation currently primarily in Germany, Austria, and other neighboring countries.

Year of construction: 2023, condition: new, In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage paternoster, and brushing machines on machineseeker! MEMBRANES for membrane presses Silicone and Natural rubber The highest quality silicone and natural rubber membranes for every membrane press (foil and veneer). POSSIBLITIES FOR DELIVERY: The membranes can be cut to the Required size or supplied by roll. SILICONE Type: MS-2 Colour: milky white Surface: textured/smooth width (standard): 1680/2000 mm polymer type: Silicone hardness: 50° Shore thickness: 3 mm temperature range: min. -50°C/max.200°C SILICONE Type: MS-1 Colour: milky blue Surface: smooth width (standard): 1600/1800 mm polymer type: Silicone hardness: 45° +/- 3 Shore thickness: 2 mm temperature range: min. - 60 °C/max. +230°C Gjdpsd S Efajfx Ah Dekf NATURAL RUBBER Type: MNK-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700-1750 and 2000 mm rubber: Natural rubber hardness: 42°Shore thickness: 2.5 - 4.0 - 5.0 mm temperature range: min. - 20 °/max. +130°C NATURAL RUBBER Special two-part version for Waterbed / oil-presses Type: MNK-2 WB Colour: grey/black Surface: Both sides smooth width (standard): 1700 mm rubber: Natural rubber hardness: 42°/60°Shore thickness: 3,5 - 4 mm temperature range:min. - 20 °/max. +130°C Standard SILICONE Rubber Sheet Type RSS Colour: redbrown or transparent (other colours on request) Surface: both sides smooth Standard length: cut or 10m rolls (other lengths on request) Standard width: 1200 mm - up to 1800 mm on request Polymer: Silicone hardness: 30° - 80°Shore thickness: 0.5 - 10 mm

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system expansion available optionally External dimensions: Height 8,700 mm Width 3,500 mm Depth 1,580 mm 51 supports with a payload of 350 kg each In the clear usable dimensions: H = 255 mm W = 3,050 mm D = 520 mm Chain pitch 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table at 990 mm above floor level with stainless steel worktop, 315 mm deep Color: gray Gkedpfxed Spf Rj Ah Dof Drive motor power: 1 x 3.8 kW / 400 volts Subject to errors and technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in Germany, Austria and other neighboring countries

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 31 h, 3D Coordinate CNC measuring device Profitech Innometrik Advanced in gantry design (demo unit at a special price) Open Cable Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Technical specifications Measurement paths: X: 500mm Y: 600mm Z: 400mm Max workpiece weight: 250kg Weight of the machine: 850kg Dimensions over everything: 1290x1160x2350mm Gjdpfxjdyah Se Ah Dskf Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.2μm Volumetric length measurement deviation: MPEE = 2.2+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 90NI / min Also configurable as a complete package with touch probe, software commissioning and training. (Annual maintenance & calibration can also be offered)

Condition: good (used), Year of construction: 2004, TBT ML 200-2-800 deep hole drilling machine TECHNICAL DATA Gkodpfx Aevcbg Seh Def Type: ML 200-2-800 Year of construction: 2004 Control: Simatic OP17 Number of spindles: 2 Spindle distance: 12 mm Drilling slide stroke: 800 mm Drilling range: 1 - 10 mm Process: Single-lip drill Drilling depth: Immersion spindle: 110 mm Seal housing: 430 mm Sealing housing with steady rest: 400 mm Spindle drive: Power: 1.7 / 2.9 / 1.3 Voltage: 240 / 350 / 350 V Frequency: 100 - 800 Hz Weight: Approx. 2.6 T We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: new, The Cedes Safe C200 Can height detection, object protection, safety evaluation device assembly has been discontinued by the manufacturer and can therefore no longer be procured. Gedpfx Ahoiwc Rlo Dskf Therefore we already have developed a replacement control for these devices, which ensures continued overdoing for years. In this context, we provide spare parts, e.g. the Cedes Safe C200 Can is available for immediate repair by our technicians, on loan and free of charge, until the device control is replaced. This means that the vertical-lift can be used continuously and the control exchange can be planned. Of course we can repair and modernize any other dynamic storage systems as well. Do not hesitate to ask for an offer !!!

Condition: used, Year of construction: 2010, Technical details: x-travel: 800 mm y-travel: 685 mm z-travel: 630 mm c-axis: 360° (Planscheibe-Tisch) control: Siemens 840D Power Line spindle speed:: 20 - 10.500 U/min max. torque on the spindle: 180 Nm tool taper: HSK -A63 DIN 69893 tool changer with: 40 places no. of tables: 2 table swivelabel +/-: je 120 (a-Achse) ° table surface area: 280 x 275 mm table load capacity: 320 kg interface: RS232 spindle hours: 38.700 h Gsdpou Idgpofx Ah Dskf Total power requirement: 37 kW dimension machine xH: 4,0 x 4,4 x 3,0 m dimensions LxWxH: Späneförderer: 2,1 x 1,05 x 1,5 m dimensions L x W x H: Kühlschmieranlage: 1,3 x 1.6 x 1,95 m 5 - axis machining center CNC machining center Clamping table for 4th and 5th axis (swivel 120° right/left/speed 50 rpm and turn with faceplate Ø 280mm/200 rpm) max. workpiece size 940 x 650mm for/on table with chip conveyor make Knoll, 750 K-1/150; year of manufacture 2009 Bürener coolant system with paper belt filter belt width 700mm; year of manufacture 2009 for both control cabinets with cooler Rittal Accessories exclusive i.D. *

Condition: good (used), Manufacturer ESTARTA Model 301 MV Condition Used Stock number 4576 Location Badajoz, Spain Dimensions 1520x1020x1260mm Weight 1550 kg Opening between grinding wheels 1,5/50mm Max. grinding wheel width in plunge grinding plunge 125mm Dimensions of the working wheel (od x id x width) 300x125x175mm Øext.min. working wheel working wheel 220mm Max. depth of Gksdpfxor Ezfpe Ah Dof profile of working profile depth 8mm Dimensions of the driving wheel (od x id x width) 220x125x125mm Øext.min. of driving wheel drive wheel 165mm Max. depth of profile of the driving wheel profile depth 8mm Grinding wheel motor power motor power 7,5Kw Motor power of grinding wheel driving motor power 0.75Kw Tilting angle angle of working working +/- 5º

Condition: like new (used), Year of construction: 2010, Machine Type: CNC Cylindrical Grinding Machine Manufacturer: Fritz Studer AG Model: S22 Year of Manufacture: 2010 Control System: FANUC 31i-A CNC Machine Base: Granitan® S103 mineral casting Configuration: Fixed straight wheelhead for external (OD) grinding Automation: Automatic loading system with FANUC robot integration Distance Between Centers: 650 mm (25.6”) Center Height: 175 mm (6.9”) Max. Workpiece Weight: 150 kg (330 lbs) Max. Workpiece Length: 700 mm Max. Workpiece Diameter: 449 mm Grinding Wheel Diameter: 610 mm Grinding Wheel Width: 160 mm Grinding Wheel Speed: Up to 3,200 rpm Spindle Power: 15 kW (20.5 hp) Wheelhead Type: Fixed straight X-Axis Travel: 310 mm Z-Axis Travel: 850 mm Gedpfewl Uvkjx Ah Dskf X-Axis Max. Speed: 15,000 mm/min Z-Axis Max. Speed: 30,000 mm/min C-Axis: Full rotation capability for workhead Programming Interface: StuderWIN with FANUC 31i-A Additional Software: StuderGRIND Automation Interfaces: Standard interfaces for loaders and peripherals Other Equipment: Rotary dresser, Heidenhain scales, various clamping fixtures