MEP FALCON 302 circular saw
MEP FALCON 352 Kreissäge

Condition

New

Location

Böblingen

MEP FALCON 302 circular saw MEP FALCON 352 Kreissäge

Show map

Machine data

Machine type:: MEP FALCON 302 circular saw

Manufacturer:: MEP

Model:: FALCON 352 Kreissäge

Condition:: new

Price & Location

Location:: Otto-Lilienthal-Straße 36, 71034 Böblingen, Deutschland

Call

Details about the offer

Listing ID:: A2275604

Update:: 26.03.2025

Description

Motor power 1,1/2,2 kW
belt opening 130 mm
belt dimensions 350x32x2,5
weight 220 kg
Speed 30/60 1/min.
Cutting surface 0° 115 / 100 / 130x80
Cutting surface 45° right 100 / 85 / 90x80
Cutting surface 45° left 75 / 75 / 90x65
Cutting surface 60° right
Cutting surface 60° left
Description
Manual crosscut saw for miter cuts from 45° right to 45° left, with high sawing power.

Construction in sturdy cast iron, practical and safe for every cut. FALCON 352 is available in bench version or on stand (accessories). The machine is equipped with a two-speed - three-phase motor. On request, the machine is supplied with pneumatic vice (FALCON 352 MA, when the head is lowered, the vice closes automatically) This version is always supplied with stand.

Basic equipment:

clutch adjustable from the outside
Blocking device with vice
Sliding on prismatic guide with adjustable bar
Fixed clamping of the vice with axial adjustment for clamping the workpiece in the immediate vicinity of the cutting line.
Adjustable fixing of the degasser, made entirely of steel.
Electric 48 V coolant pump for cooling and lubrication of the saw blade. Double spring for the return of the to fix the loading platform.
The machine can be lifted.
Endless worm shaft mounted on pair of bearings.
Saw blade holding shaft mounted on off-center punch.
2 speeds 30 and 60 rpm.
Vise opening 130 mm
Machine is supplied without saw blade.
Electrical equipment:

Electrical control panel
marked cable connections
main safety switch provided for padlock
Emergency stop device
Phase failure protection
Speed changeover switch
Thermal magnetic protection
Undervoltage release
Motor with IP 54 protection
Low voltage system 24 Volt
Electric coolant pump 48 V
Motor 1,1/2,2 kW - 400 Volt

Iaodpscgrkyjfx Adwsl
For further technical data please refer to the attached PDF document.

The listing was translated automatically. Translation errors are possible.

Documents

2275604-01.pdf

Seller

Registered since: 2002

155 listings online

Call

Send inquiry

Telephone & Fax

+49 7033 ... show

These listings may also fit your interest.

Listing

Tangential grinding jakobsen 1432 Jakobsen 1432

Balaguer

7,548 km

Tangential grinding jakobsen 1432
Jakobsen1432

Call

Year of construction: 1990, condition: reconditioned (used), tangential grinding machine Brand: Jakobsen Model: 1432 Year: 1990 rpm: 1400 Grinding area: 800x400mm Table size: 1000x350mm Iedpfxeiv S Avo Adweal Maximum load on table: 400kg Maximum piece height: 475mm Grinding wheel size: 350x50x127mm Heidenhain ND 221B height indicator. Magnet table 800x350mm electronic Selter with magnetization regulator. Maximum distance between table and grinding wheel: 650mm MONNET brand filter of the year 2007 Includes sets of wheels (See photos).

See details

Listing

Lauda-Königshofen

6,805 km

Miter punch
Morsoe

Call

Listing

Bandsaw - Horizontal BERG & SCHMID GBS 242 DG AutoCut

Germany

6,760 km

Bandsaw - Horizontal
BERG & SCHMIDGBS 242 DG AutoCut

Call

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 25 - 90 m/min total power requirement 1,1 / 1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m Isdpfxefgyh Ro Adwjal ATTENTION SPECIAL PRICE!!! (20347) Double miter metal band saw with: - Belt speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table for quick miter adjustment - Quick-action clamping stick can be moved - Quick release lever - Automatic cooling

See details

Listing

Rodoč

6,151 km

Profile bending machine
SahinlerHPK 100

€14,000

fixed price plus VAT

Call

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Machine in excellent condition!! Standard specification: Ijdpfx Aer Ddurjdwsal welded steel construction 3 drive rollers horizontal and vertical working position shafts made of improved special steels digital reading portable control panel work instructions Optional equipment: Technical data: shaft diameter: Ø100 mm roller diameter: Ø315 mm working speed: 7 m/min engine power: 7.5 kW machine length: 2000 mm machine width: 1450 mm machine height: 1700 mm machine weight: 3650 kg

See details

Listing

Concrete Pipe Machine ZİM Mühendislik ZIM T 1210

Romania

5,627 km

Concrete Pipe Machine
ZİM MühendislikZIM T 1210

Call

Year of construction: 2022, condition: new, ZIM T 1210 machine is designed to increase efficiency for production of manholes, conics and rings. It’s production capacity is very high when you compare with the ordinary machines. It has uniqe specifications to increase production capacity, using life, products quality. This machine can produce pipes 300mm – 1200mm diameter and 1000mm height. Machines can be designed semi or full automatic according to requirements. We use SIEMENS brand PLC microprocessors on automatic machines. There is mortar bunker and mortar filling cart on machines. We use inner filling system for mortar filling cart and it makes equal and fast filling to moulds. Production is done on production pallets, This production pallets should wait till the products dry and it takes around 24 hours if there is no curing system. Iedpfx Aoirtdpodwsal The vibration system of machine is controlled by frequency driver controll system. It does not need any mechanic settings. It can easily adjusted from operator pannel. The vibrator system specially designed by our R&D team is used in our machines. The cooling of the vibrators are done by oil cycle system. There is a special unit for that cycling process. Oil flow is controlled by special sensors. Thanks to this technology our machines which have been working for many years without any problems, stand out with their low operating costs. Special designed strong chassis of the machine enables long life production without errors. Produced materials can be carried to drying area with carriage carts or forklifts. The products can be carried to drying area with carriage carts or forklifts.

See details

Listing

Bed Type Milling Machine - Universal IBERIMEX MVR (teilueberholt) Ecomill BF3000 / iTNC530

Dreieich

6,879 km

Bed Type Milling Machine - Universal
IBERIMEX MVR (teilueberholt)Ecomill BF3000 / iTNC530

Call

Condition: reconditioned (used), Year of construction: 2009, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,500 rpm, workpiece weight (max.): 8,000 kg, overall weight: 13,500 kg, Equipment: rotational speed infinitely variable, x-travel 3.000 mm y-travel 1.000 mm z-travel 1.000 mm control iTNC 530 HEIDENHAIN table-size 3.230 x 1.050 mm table load 8,0 t spindle taper ISO 50 tool change unit 24 Pos. spindle turning speed range 30 - 3.500 U/min drive capacity - spindle motor 25 kW feed stepless 1 - 5.000 mm/min Iaodpjvlzznefx Adwel rapid traverse 10,0 m/min chip conveyor Spiralförderer voltage 380 V total power requirement 35 kVA weight of the machine ca. 13,5 t dimensions of the machine ca. 7,40 x 3,65 x 3,60 m hydraulic power unit 1,40 x 0,50 x 0,60 m 0,45 x 0,70 x 0,85 m - Serial No.: VH-30041 - Maschine ON 23.724 h - Spindel ON 7.968 h - CNC-Control: iTNC 530 HEIDENHAIN - Universal Milling Head (Huron-Type), manual - 2x Screw type chip conveyor at front and back of table - Oil chiller unit - Y-Axis guitde ways with new TURCITE - Ball screws and bearings in X/Y/Z axis renewed

See details

Listing

Cold Circular Sawing - Automatic BERG & SCHMID VKS 370 VA CNC

Velen

7,005 km

Cold Circular Sawing - Automatic
BERG & SCHMIDVKS 370 VA CNC

Call

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 17 - 70 U/min total power requirement 3,0 kW weight of the machine ca. t dimensions of the machine ca. 1,9 x 1,45 x 2,1 m SPECIAL PRICE!!! High-performance vertical circular saw Hydropneumatic fully automatic. (20195) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade protective hood CNC control: · With button for over 90 different sawing programs with 99 sub-programs for length, quantity and angle · Automatic feed unit 2,000 mm via ball screw Incremental feed with automatic length compensation. Adjustable for cutting lengths from 25 - 9,999 mm. · Fully hydraulic control of saw frame and clamping devices · Pre-selection of 3 different material feed speeds Iedpfx Aod Iin Esdwsal · Visualization of the entire workflow with simple data entry ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

See details

Listing

Aluminum miter circular saw for shifter cut MEP Cobra 352

Rödermark

6,869 km

Aluminum miter circular saw for shifter cut
MEPCobra 352

Call

Condition: good (used), Year of construction: 2008, machine/vehicle number: 21100122-F, Offer 25108 Technical Data: - Saw blade dimensions 350 x 3.4 x 32 mm - Saw blade speed 3400 rpm - Cutting range at 90° round 120 mm Isdpfx Adewq N Sweweal - or flat 105 x 105 mm - 180 x 70 mm - at 45° round 110 mm - flat 135 x 60 mm - Bevel adjustable left + right 45 ° - Tiltable bevel adjustment of the saw head for ship cuts left - Pneumatic vises - Discharge – roller conveyor with length stop 2000 mm - Feed – roller conveyor 3000 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 600 x H 1730 x D 1200 mm - Weight approx. 180 kg

See details

Listing

Dortmund

6,965 km

Universal milling head
EMENAV 0

€7,995

fixed price plus VAT

Call

Condition: new, 1 brand-new universal milling head "HURON" system Make: EMENA Model: V 0, ISO 40, normal Technical data: Mounting ISO 40 Projection 270 mm Rated drive power 5 HP Max. speed 1800 rpm Weight approx. 32 kg Design: Standard, with adapter plate / mounting flange finished on the head side, unmachined on the machine side, for retrofitting to conventional, NC or CNC milling machines or drilling machines of any kind, "HURON" system Iasdebpmv Sopfx Adwsl Option: - Raised version Delivery time: approx. 3 months, after receipt of order and payment Illustrations are similar! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

See details

Listing

Twist drill 4 pieces Diverse Zweischneidig Ø 24 - 26,5 mm

Wiefelstede

6,930 km

Twist drill 4 pieces
DiverseZweischneidig Ø 24 - 26,5 mm

Call

Condition: good (used), Drill bits, twist drills, drill bits -Manufacturer: Maysso / Ilix, twist drill 4 pieces Ø 24 - 26.5 mm -Type: double cutter, MK3 mounts -Size: 1x Ø 24/25.5/26/26.5 mm each -Price/tax: complete -on request: different sizes/quantities available from additional stock Iodpfx Aderqinqeweal -Transport dimensions: 290/100/H30 mm -Weight: 2.5 kg

See details

Advertise here