Used heavy-duty shelves for sale (200)

Condition: good (used), Year of construction: 2016, 134 units, side protection / frame protection / impact protection / guardrail for pallet racking, single or double rows, Nedcon - used - : Price ex location: €95 / unit (net), dismantled, packaged and loaded! Manufacturer: Nedcon Model: Set Flank protection sigma 135deg Year of manufacture: 2016 / 2019 Type 1 (for single row): 6 units available Side protection sigma 135° L=1100mm Set Flank protection sigma 135deg L=1100 Length: 120cm Height: 40cm Depth: approx. 22cm Weight: approx. 31kg Original price: approx. €205 (net) / unit Gusdpsy Aixusfx Aa Sea Type 2 (for double rows): 124 units available Side protection sigma 135° L=2400mm Set Flank protection sigma 135deg L=2400 Length: 243cm Height: 40cm Depth: approx. 22cm Weight: approx. 41kg Original price: approx. €227 (net) / unit Condition: good – very good Available: immediately Location: Augsburg

Condition: used, Beams: 2700x120x50 mm 63 units Frames: 5200x1000x95 mm 17 units 4600x1000x90 mm 4 units 2300x1000x95 mm 2 units If you require racks or accessories in different configurations or versions, please contact us. We offer a comprehensive range of new and used racking systems and accessories, and are happy to assist you with your planning. Further accessories available, such as: Frame, corner, and collision protection, push-through guards, chipboard panels, wire mesh shelves, rear mesh panels, depth bars. Shipping: Please enquire about shipping costs, specifying your postal code, location, and the quantity of items required. Godpoh Izr Uofx Aa Soua Additional services: Planning, rack assembly/disassembly, purchase/sale Technical data, specifications and prices are subject to change and errors. Previous sale reserved!

Condition: good (used), Pallet racking system with chipboard decking according to your needs. Gsdpfed Duc Tjx Aa Ssua Frame height, frame depth, beam length is also according to your requirements. Send your enquiry and we plan your system accordingly.

Condition: excellent (used), functionality: fully functional, load capacity per storage section: 9,000 kg, total height: 4,400 mm, total width: 2,700 mm, load capacity: 1,800 kg, frame height: 4,400 mm, frame width: 1,100 mm, For sale: a complete set of MGL HX pallet racking – a robust, proven system for standard pallet storage. The ideal solution for operational warehouses, e-commerce, and medium-duty logistics. Goods available immediately – fast delivery with no weeks of waiting. Specification: System: MGL HX Type: Pallet racking Frames: Quantity: 400 pcs Height: 4,400 mm Depth: 1,100 mm Beams: Quantity: 3,000 pcs Length: 2,700 mm Load capacity: 1,800 kg per level Why choose this solution: ✔ Universal height – perfect for most warehouses ✔ Excellent price-performance ratio ✔ Large quantity – suitable for complete facility fit-out ✔ Immediate availability – minimize your warehouse startup time Additionally, we offer: Dismantling and installation Transport across Europe Assistance with warehouse layout planning and optimization Location: Poland Availability: Immediate Gusdpfx Aeywrryoa Sja Contact: Write or call – we will prepare a configuration tailored specifically to your warehouse.

Condition: good (used), load capacity per storage section: 18,000 kg, total height: 10,500 mm, total width: 2,700 mm, shelf length: 2,700 mm, load capacity: 3,000 kg, frame height: 10,500 mm, frame width: 1,100 mm, For sale: a very robust pallet racking set by the renowned brand Tegometall – a high load capacity system, ideal for heavy-duty storage operations. Set is available immediately – ready for rapid delivery. Specification: Manufacturer: Tegometall Type: Pallet racking (heavy duty) Frames: Quantity: 400 pcs Height: 10,500 mm Depth: 1,100 mm Beams: Gusdpfxeywrrts Aa Sja Quantity: 4,000 pcs Length: 2,700 mm Profile: IPE 100x50 Load capacity: up to 3,000 kg / level Why choose this product: ✔ Extremely solid construction – designed for heavy loads ✔ Perfect for high-bay warehouses ✔ Large stock – suitable for bigger projects ✔ Immediate availability – quick assembly and commissioning Additionally, we offer: Disassembly and installation Transport across all of Europe Technical advice and warehouse configuration Location: Poland Availability: Immediate Contact: Feel free to get in touch – we will prepare an offer tailored to your warehouse needs.

Condition: excellent (used), Year of construction: 2022, total length: 1,850 mm, total height: 120 mm, load capacity: 3,000 kg, For sale: STOW cross beams in perfect condition, more than 5,000 units available Guodpfx Aaexprfzj Sja -1850mm -120x50, 3000kg

Condition: good (used), Year of construction: 1999, Pallet racking, Stow, height approx. 12m, 850kg per pallet, 2.70m beams, approx. 13,470 pallet spaces – used –: Price ex location: only €169,500 (net), dismantled, packed, and loaded! Price for larger partial quantities: on request! Manufacturer: Stow Type: unknown, likely Pal Rack NS Year of manufacture: 1999 Number of frames: 458 pcs, of which 16 pcs are approx. 0.94m deep (these are the frames with transfer positions) Frame width: approx. 12cm Guedpsyzfvyefx Aa Ssa Frame height: approx. 12.70m, top shelf at 12m Frame bracing: bolted Frame depth: approx. 1.05m Number of beams: approx. 8,064 pcs Clear beam length: approx. 2.70m Beam height: approx. 12cm Beam spacing: approx. 2.71m Height to first beam level: approx. 1.59m Max. bay load: 2,550kg = 850kg per pallet position Max. field load: 19,900kg Condition: good Available: from end of April 2026 Location: Bremen

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolt-together system Scope of delivery: 9 rack uprights, height 4,230 mm, with base plate, usable depth 1,200 mm 27 cantilever arms, usable depth 1,200 mm, with deflectors Gujdpfjh R Taqex Aa Ssa 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Without wood purlins and trapezoidal sheets for roof assembly) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE sections - All components with hot-dip galvanized finish - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, depth 1,200 mm with deflector = 4 storage levels vertically - Including longitudinal and diagonal bracing with 1,500 mm upright spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with prior notification before delivery. The goods are packaged for easy unloading. The installation surface must be concrete, level, suitable for anchoring, and capable of supporting the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. Guedpfx Aemhhypea Sja The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Gsdpfx Aemhh Dhsa Ssua The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) Gusdpfxefdkb To Aa Sea - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth Gsdpfx Aaemhh Dzs Seua 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Guodpfjmhh Ansx Aa Sja - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) Godpfxsguk A Ho Aa Sjua - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard Gujdpfx Aaoguk Dko Soa - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) Gujdpfx Aaemhhy No Ssa - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. Gujdpemhh Dtofx Aa Soa The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: Gjdpfx Aaoguk Dvj Sjua 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Frame: 8860x1050x80 mm, 34 pieces 3000x1050 mm, 7 pieces Godpfxjd Hbqns Aa Seua Beams: 1860x75x45 mm (2800 kg/level), 352 pieces 2760x115x40 mm (2400 kg/level), 26 pieces 2700x100x50 mm (2400 kg/level), 22 pieces Partial quantities can also be purchased. If you require racks or accessories in other configurations or versions, please contact us. We offer a comprehensive range of new and used racking systems as well as accessories and are happy to assist you with your planning. Providing you with a tailor-made offer is a matter of course for us. Shipping: Please request freight costs by providing your postcode, location, and the desired quantity of items.

Condition: used, dimensions ca. 1030 x 1100 mm Gujdpfx Aajvpr Tio Sja

Condition: new, APPROX. 8.4 RUNNING METERS, H: 500CM, SHELF LOAD: 4500 KG, PALLET RACKING, HEAVY-DUTY RACKING, HIGH-BAY RACKING, INDUSTRIAL RACKING, RACKING IMMEDIATELY FROM STOCK Guodpfxey A H Sls Aa Sja Approx. 8.4 running meters, h: 500 cm, shelf load: 4500 kg Pallet racks, heavy duty racks, high racks . Industrial shelving , Racks Immediately from stock Data : - Height : approx. 500 cm - Depth : approx. 110 cm - Length : approx. 8.4 running meters - Load: 4500 kg shelf load - Stand in galvanized - Cross beams 270 x 15 x 5 cm, T45 - Cross beams in orange - New BLT PR50/101 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 04 x upright approx. 500 cm x 110 cm, disassembled. - 18 x crossbar approx. 270 x 15 x 5 cm, T45. - 36 x safety pins. - Levels: Floor + 3 - 36 pallet spaces incl. floor spaces. - - IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1840,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece.

Condition: used, functionality: fully functional, The used Stow pallet racking system is a high-quality heavy-duty rack designed for industrial storage – approximately 100 linear meters in length and 7 meters high. Ideal for logistics, warehouses, and trades requiring maximum storage capacity in a minimal footprint. Manufactured in Europe, this racking system stands for stability, quality, and durability. Now available directly from stock – perfect for businesses with a high turnover of goods. Customizable to your requirements: The rack frames can be individually modified to your desired height – precisely and professionally in our workshop. Contact us – we offer tailor-made solutions for your storage needs. PRODUCT DETAILS: - Height: approx. 700 cm - Depth: approx. 110 cm Gusdpfx Aoy A H R Iea Soa - Length: approx. 10,000 cm (100 linear meters) - Shelf load: 3,200 kg - Beams: 360 x 14.5 x 5 cm - Beam color: RAL2004 (orange painted) - Uprights: 700 x 110 cm, RAL5015 (blue painted), pre-assembled - Levels: floor + 3 - Pallet spaces: 432 incl. floor positions - Version: Used Stow equipment INCLUDED IN DELIVERY: - 28 x upright frames (approx. 700 x 110 cm), pre-assembled - 162 x beams (approx. 360 x 14.5 x 5 cm) - 324 x safety pins Price: €9,800.00 net €11,662.00 gross An invoice with VAT shown will be issued. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany by our partner carrier – shipping costs depend on postal code - Professional installation and dismantling by trained teams available as an option - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTING: Our planning department will be happy to prepare a non-binding, customized offer based on your requirements. Whether new builds, conversions, or expansions – we offer expert advice for your racking configuration. SHOWROOM: You are welcome to visit us in our showroom! Experience our pallet racks, storage racks, and other solutions firsthand. Many systems are assembled and can be viewed in operation. Our specialists are on site to answer your questions and provide personalized advice – we look forward to your visit! Haven't found the right solution yet? Visit our website for a quick overview of numerous offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. Our telephone number is available on our company page. ☎️ We can be reached by phone Monday to Friday, 08:00 – 16:00. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Condition: used, functionality: fully functional, Used pallet racking from SSI Schäfer ranks among the most popular solutions for efficient and secure warehousing. This heavy-duty racking system is ideal for warehouses, industrial settings, and logistics centers requiring robust and durable racking for Euro pallets. The proven PR600 construction offers high load capacities, flexible configurations, and reliable performance in daily operations. Buying used means: tested brand quality at an attractive price – immediately available from stock for new construction, conversion, or expansion of your racking system. Customizable: The racking frames (Type P100 / P120) can be modified to your desired height – precisely and professionally in our workshop. We deliver tailored racking solutions for every storage requirement. PRODUCT DETAILS - Height: approx. 750 cm - Depth: approx. 105 cm - Length: approx. 10,100 cm - Shelf load capacity: 3,000 / 3,500 kg (depending on variant) - Bay width: 270 cm (fits 3 × EPAL pallets) - Beams: 270 cm, Type INP100 or CE110 (box profile) - Beam color: Blue - Frame type: P100 / P120, frames galvanized, pre-assembled - Levels: floor + 4 - Pallet positions: 540 including floor positions - Model: Used SSI Schäfer PR600 - Availability: immediately available from stock, multiple units in stock SCOPE OF DELIVERY: - 037 × frames approx. 7.50 × 1.05 m, galvanized, pre-assembled - 288 × beams approx. 270 cm (INP100 or CE110) - 576 × safety pins Price: €11,884.00 net €14,094.36 gross Gedpey A H Rhjfx Aa Ssua You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery in Germany by our partner freight forwarders – freight costs depend on postal code - Professional installation and dismantling by trained teams available as an option - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our design department will gladly prepare a non-binding offer tailored to your needs. Whether new build, conversion, or extension – we offer expert advice on your racking configuration. SHOWROOM: You are welcome to visit our showroom! On-site, you can get a comprehensive view of our pallet racking, storage racks, and other solutions. Many systems are assembled and can be experienced directly. Our specialist advisors are happy to answer your questions and provide individual consultation – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of numerous offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. You will find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 – 16:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: used, Used pallet racking systems from SSI Schäfer are among the most popular solutions for efficient and secure warehousing. This heavy-duty racking system is ideal for warehouses, industrial, and logistics operations requiring robust and durable racks for Euro pallets. The proven PR600 series offers high load capacities, flexible configurations, and reliable performance in daily use. Purchasing used means: tested brand quality at an attractive price—immediately available from stock for new installation, conversion, or extension of your racking system. Customizable: The racking frames (frame type P100 / P120) can be adapted to your desired height—precisely and expertly modified in our workshop. We deliver bespoke racking solutions for every storage requirement. PRODUCT DETAILS - Height: approx. 750 cm - Depth: approx. 105 cm - Length: approx. 1,410 cm - Shelf load: 3,000 / 3,500 kg (depending on configuration) - Bay width: 270 cm (fits 3 × EPAL) - Beams: 270 cm, type INP100 or CE110 (box profile) - Beam colour: Blue - Frame type: P100 / P120, galvanized, pre-assembled - Levels: Floor + 4 shelves - Pallet spaces: 75 incl. floor positions - Version: Used SSI Schäfer PR600 - Availability: Immediately available from stock, several units in stock SCOPE OF DELIVERY: - 6 × frames approx. 7.50 × 1.05 m, galvanized, pre-assembled - 40 × beams approx. 270 cm (INP100 or CE110) - 80 × locking pins Godpfxey A H N De Aa Sjua Price: €1,800.00 net €2,142.00 gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery in Germany via our partner forwarding agent—freight costs depend on postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections as per DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will gladly provide you with a non-binding quotation, individually tailored to your requirements. Whether for new installations, modifications, or expansions—we offer expert advice for your racking configuration. SHOWROOM: Feel free to visit us in our showroom! You can get an extensive overview of our pallet racking, shelving, and other solutions on site. Many systems are assembled and ready for you to experience first-hand. Our experts are available to answer your questions and provide individual advice—we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of a wide range of offers and product variants! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 16:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: used, Used pallet racking systems from SSI Schäfer are among the most sought-after solutions for efficient and safe warehousing. This heavy-duty racking system is ideal for warehouses as well as industrial and logistics companies that require sturdy and long-lasting racking for storing Euro pallets. The proven PR600 design offers high load capacity, maximum flexibility, and is perfectly suited for storing goods with high weights. Buying used here means you get certified brand quality at a highly attractive price – immediately available for new construction, redesign, or extension of your existing racking system. Individually adaptable: The frame uprights (Type P120) can be refitted to your desired height – professionally and precisely in our workshop. We deliver tailor-made racking solutions for every storage requirement. PRODUCT DETAILS - Height: approx. 490 cm - Depth: approx. 105 cm - Length: approx. 1410 cm - Shelf load: 3000 / 3500 kg (depending on variant) - Bay width: 270 cm (fits 3 × EPAL pallets) Gjdsy A H I Topfx Aa Ssua - Beams: 270 cm, Type INP100 or CE110 (box profile) - Beam color: Blue - Frame type: P120, galvanized, pre-assembled - Levels: Floor + 2 - Pallet spaces: 45 incl. floor positions - Design: Used SSI Schäfer PR600 - Availability: Immediately ex-stock, multiple units available INCLUDED IN DELIVERY: - 06 × frames approx. 4.90 × 1.05 m, galvanized, pre-assembled - 20 × beams approx. 270 cm (INP100 or CE110) - 40 × safety pins Price: 1080.00 € net 1285.20 € gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery throughout Germany by our partner freight company – freight costs dependent on postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will gladly prepare a non-binding offer tailored to your requirements. Whether for new builds, reconfiguration, or expansion – we provide expert advice for your racking configuration. SHOWROOM: Feel free to visit us at our showroom! On site, you can get a comprehensive overview of our pallet racks, storage racks, and further solutions. Many systems are assembled and can be experienced directly. Our specialist advisors are available for any questions and individual consultations – we look forward to your visit! Haven’t found what you’re looking for yet? Visit our website for a quick overview of many offers & variants of our products! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone call. You’ll find our phone number on our company page. ☎️ We are available by phone Monday to Friday, from 08:00 to 16:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.