Other machines

MEP PH 261-1 HB

Condition: new, cutting diameter 225 mm capacity 90 degrees: flat 245 x 150 mm capacity 90 degrees: square 200 x 200 mm capacity 45 degrees: flat 160 x 140 mm capacity 45 degrees: round 160 mm capacity 45 degrees: square 140 x 140 mm capacity 60 degrees: flat 110 x 80 mm capacity 60 degrees: square 90 x 90 mm capacity 60 degrees: round 90 mm vice 245 mm turning speed range: 46/92 m/min Pgsdpfx Aoxaa Dyelwet saw band length 2450 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 240 kg dimensions of the machine ca. 1.530 x 900 x 1.720 mm Equipment: - compact / robust manual band saw - with one-sided miter device up to 60° left - hydraulic lowering of the saw bow * stepless feed adjustment * limit switch at the end of the cut - 2x saw band speeds - saw band guide made of hard metal plates - manual vice with quick lock - machine base with - coolant device - manual saw band tension (star grip at the front) - 1x angle stop - 1x metal saw band - operating instructions

Condition: new, table length 1300 mm table width 800 mm stroke height 1010 mm weight max. in kg 1000 kg 190 mm connected load frequency 380 V total power requirement 0,75 kW Pgjdpsfrztxsfx Alwst weight of the machine ca. 0,22 t dimensions of the machine ca. 1,3 x 0,8 x 0,2 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.

Condition: used, For sale: MEP PH 261-1HB band saw for metal. The machine is used, in good condition and fully operational. Inspection and testing on site is possible. The MEP PH 261-1HB is a professional manual gravity band saw for metal, designed for cutting tubes, profiles, and solid materials. The HB system enables automatic descent cutting without operator intervention. Specifications: Model: MEP PH 261-1HB Mitre cutting range: 0° to +60° Cutting capacities: 0° – Ø225 mm, 200 x 200 mm, 240 x 160 mm +45° – Ø160 mm, 140 x 140 mm, 155 x 115 mm +60° – Ø90 mm, 90 x 90 mm Psdpfxjy R Sgwj Alwjgt Maximum vise opening: 245 mm Blade dimensions: 2450 x 27 x 0.9 mm Blade speed: 46 / 92 m/min Motor power: 0.94 / 1.1 kW Working table height: 950 mm Machine weight: approx. 240 kg Cast iron construction for reduced vibration and increased cutting precision Quick mitre adjustment Suitable for cutting steel, stainless steel, aluminium, and other metals For more information: MEP PH 261-1HB Professional Italian machine for workshops, production, and metalworking companies. If you have any further questions, we will be happy to assist you.

Condition: new, saw blade diameter 300 mm capacity 90 degrees: round 102 mm Pjdpfsfg Rlajx Alwsgt capacity 90 degrees: square 90 mm capacity 90 degrees: flat 120x80 mm capacity 45 degrees: round 90/80 mm capacity 45 degrees: square 80/70 mm capacity 60 degrees: flat 90x70/85x70 mm total power requirement 1,5/2,0 kW weight of the machine ca. 0,135 t dimensions of the machine ca. 0,5 x 1,05 x 1,0 m The versatile professional metal circular saw. Convincing in performance and price. · For miter cuts left up to 45° · For sawing steel, stainless steel and, to a limited extent, aluminum profiles · Spindle vice with double clamping arm for low-burr cuts · Cone safety clutch to protect the saw blades. · 2 speeds 33 + 66 rpm · Automatic cooling directly on the saw blade · Double bearing for saw head · 24 V safety switch in the handle with restart lock · Length stop, assembly tool · Closed cast, solid cast superstructures · Miter adjustment on operator side machine base (option) ATTENTION: Price is without saw blade!!! (saw blade price EUR 93 / EUR 123)

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Pjdpfoudi Unex Alwogt Technical data TOTAL POWER 1.5kW POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder BLADE LENGTH 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Tauring, controller model: digital readout, number of rollers: 3, shaft diameter: 70 mm, roller diameter: 245 mm, pipe diameter (max.): 100 mm, tube wall thickness (max.): 6 mm, overall weight: 1,300 kg, total length: 1,640 mm, total width: 1,220 mm, total height: 1,580 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, Profile bending roll Tauring Alfa 70H2 year 2003 -Hydraulic section bending machine with digital readout -3 rolls powered driven - -dual pre-pinch pyramid roll configuration Pjdpfx Aljyx Dg Sowegt Shafts output 70 mm – Size of universal rollers 245 mm Lateral correctors left/right side hydraulic motorized operated Machine reversible can work with shafts vertical/horizontal Tooling: -Set of universal rolls and spacers Pipe bending rolls set for tube 22,5 – 61 – 76 - ( see photos of the rolls in enclosed ) Power total installed 5,5Kw Vac 380/50 Dimension 1640 x 1220 x H1580 mm Weight 1300 kgs -CAPACITY CHART IN ENCLOSED

Condition: new, Year of construction: 2023, BERG+SCHMID Aluminum Circular Saw Model VELOX 350 Manual Speed: 1800+3,600 rpm - Mitre left + right 45° Pjdpfxor Ilkto Alwogt - Head bevel cuts up to 45° (Schifter) - Ball bearing rotary table - Machine base - Highest cutting quality due to vibration absorption - Very smooth running cut - Pull-through start and high performance - Machine base with chip drawer Saw blade dimensions: 350x32mm Further accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: used, System: Chamber filter press mobile, used Type: Netzsch Application area: sludge dewatering Figur-No.: 012.73/319.73/665.73/TH Commission No.: 040.417 Filter plate size: 1200x1200 Number of plates: approx. 100 Filter plates: PP Filter cloths: optionally available in accordance with the medium Filter area: approx. 250 m2 Press volume: approx. 3540 dm3 Filter pressure: approx. 15 bar Pump 1: SEEPEX Type BN 35-12 Commission number 266222 Pump 2 SEEPEX Type BN 10-24 Commission number 266223 Pump 3 SEEPEX Pgodpewqydwjfx Alwet Type BN 75-6LT Commission number 266224 Washing system No Conveyor technology yes Polymer system yes Application: sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation of suspensions. Purchase or rental Rental or purchase. Inspection of the systems by arrangement at our works.

Condition: new, Year of construction: 2026, CORMAK Z5020 BF Vario Column Drill Press is a versatile and modern metal drilling machine designed for intensive operation in industrial plants, locksmith workshops, and maintenance departments. The machine provides excellent stability, precision, and high working comfort thanks to stepless spindle speed adjustment and an ergonomic design. Main advantages of the machine Stepless spindle speed adjustment – a range of 190–2700 rpm allows optimal adjustment of parameters to the type of material being processed. Rigid machine body construction – minimizes vibrations and improves drilling accuracy. Height-adjustable worktable – precise rack adjustment and the possibility of tilting within a range of ±45°. Electronic speed indicator – provides real-time control of drilling parameters. Laser pointer and LED lighting – facilitate tool positioning and improve visibility of the working area. 100 mm machine vice included – the machine is ready for operation immediately after setup. Construction and technology The CORMAK Z5020 BF Vario column drill press is equipped with a stable 70 mm diameter column and a wide 480 × 290 mm base, ensuring excellent support and rigidity of the entire structure. The standard MK2 spindle features a 120 mm stroke, allowing deep drilling without the need to reposition the workpiece. The worktable design enables rotation and tilting, allowing the operator to precisely adjust the position of the workpiece according to the machining operation. Precision and work efficiency Pedpovuf Ikjfx Alwsgt The powerful 750 W motor and maximum drilling capacity of 20 mm enable effective machining of most metal materials. The electronic speed indicator and drilling depth stop provide full control over the process. The long column and large table height adjustment range (660 mm) allow machining of taller workpieces and the use of tools with larger reach. Applications The Z5020 BF Vario model is a metal column drill press recommended for: mechanical and locksmith workshops, maintenance departments, light and medium industry, prototype work and single-piece production. Standard equipment 100 mm machine vice Laser drilling pointer LED work light Electronic speed indicator Three-arm spindle feed lever Drilling depth stop Worktable with rack height adjustment Technical specifications Parameter Value Maximum drilling diameter 20 mm Spindle speed range 190–2700 rpm Power supply 230 V Spindle taper MK2 Maximum spindle stroke 120 mm Spindle-to-column distance 170 mm Spindle-to-base distance 1060 mm Table height adjustment range 660 mm Column diameter 70 mm Table dimensions 280 × 280 mm Base dimensions 480 × 290 mm Motor power 750 W Machine height 1650 mm Weight 75 kg

Year of construction: 2023, condition: new, machine/vehicle number: PRJ065955, ALZMETALL bench drill press, drilling capacity in steel: 12 mm Drill chuck mounting: B16 external taper, spindle stroke: 40 mm, overhang: 200 mm, column diameter: 50 mm, usable table surface: 300x240 mm, with T-slots 2 x 12 mm x 80 mm, distance spindle-base plate min./max. 110/250, manual feed, machine height without options: 670 mm, net weight: 64 kg. - Speed infinitely variable 250-5000 rpm Pedolub Rdspfx Alwegt Standard equipment: 5" TFT-LCD display with touch function: manual input of target spindle speed, display of actual speed, integrated depth gauge with touch function for zeroing, virtual depth scale on the display, machine status indicators and warning messages on the display, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU AC motor 230 volts, 50 Hz, connection plug pre-assembled, cable length 2 m, three separate buttons for clockwise rotation - counterclockwise rotation - stop, Spindle stop via braking function, spindle guard with electrical protection, main switch lockable, mushroom push button (self-locking) for EMERGENCY STOP, speed adjustment continuously variable via potentiometer, protection class IP54, spindle guard with electrical protection, paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black including the following options: LED machine light, item no. 12. Delivery time: from stock, Waiblingen/Beinstein