Box van

MERCEDES-BENZ 818 Atego 4x2, 6.200mm lang, Möbel, Klima

Condition: used, machine/vehicle number: WF0RXXWPGRER8xxxx, Year of construction: 2015, Please contact ATS Norway for more information Please provide reference number upon request: 21817 Specifications: Not EU-approved Km: approx. 220,000 (may increase) Tow hitch Tires (see photos) Euro 5, 95 hp 4x2 3 seats Radio/CD Climate control / AC Ready for delivery Ksdsxw Nhpepfx Aanofa Notes: Leak in the injectors HK: 95 Technical approved: no EU-approved until: 30.06.2025 Own weight: 1431 Total Weight: 2030 Payload: 524 Width: 183,5 Length: 441,8 Euro: 5 Model: CONNECT Number of seats: 3

Year of construction: 2025, condition: new, GeoBoost-7000 Combined bench for turbocharger geometry calibration and performance evaluation. Stand for static and dynamic calibration and testing of turbocharger. It has a combined two-position design, which allows testing the turbocharger in two modes - rapid static calibration of turbocharger geometry - Full dynamic diagnostics at different operating modes GeoBoost-7000 will allow you to carry out professional testing of turbocharger operation during repair, tuning or modernization. The availability of two working zones of the machine depending on the testing method helps to carry out comprehensive diagnostics. Kfsdsvtn Hmjpfx Aanea HIGHLIGHTS • Simulates real-world operating conditions for accurate turbocharger diagnostics and tuning. • Flexible and versatile to work with a variety of turbocharger models. • All types of turbochargers can be installed using the accessories provided. • Oil leak testing using heated oil and compressed air. • N75 turbocharger control valve testing. KEY FEATURES - Ability to adjust the extreme position of the blades of the air flow control mechanism. - Adjusting the length of the stem to adjust the actuation torque of the air flow control mechanism. - Real-world turbocharger testing; - Real-time geometry tuning; - Performance testing of actuators: vacuum, pneumatic and electric types; - Diagnosis of servo-drives of electric actuators (optional); - Post-assembly testing of the turbocharger for oil leakage; - Availability of a high capacity vacuum pump to create the required vacuum and air flow. - Testing the turbine according to the manufacturer's test plan; - Calculate turbocharger performance; - Plot supercharger inlet and turbocharger outlet boost vs. flow; - Construct the resulting graph; - Generate and print test reports. SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1700 х 900 х 1500 mm Weight 400 kg

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Ksdpfx Aajin Ub Tenefa Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: new, Year of construction: 2025, TYTAN CENTER 750 Vario Lathe-Mill Combo 230V | Turning: 250 × 750 mm | Milling: 16 mm | Variable Spindle Speed The TYTAN CENTER 750 Vario is a versatile combination machine that merges a lathe and a milling machine into one compact unit—saving space and increasing functionality. It features independent spindle motors for both turning and milling, each with variable speed control. Ideal for small workshops, industrial repair shops, and home garages, it enables a wide range of machining operations without the need to switch machines. Key Features Two-in-one design – combines turning and milling in one compact, space-saving machine Independent spindle motors with variable speed – allows separate operation of lathe and mill functions LCD displays – precise spindle speed monitoring and adjustments for both units Two spindle speed ranges – adaptable to various materials and machining tasks Complex part machining – reduces repositioning between machines Rigid dovetail guideways – provide high stability during milling operations Kedew H Rdmspfx Aanjfa Technical Specifications LATHE Feature Value Chuck size 125 mm (3-jaw) Max. turning diameter over bed 250 mm Max. turning diameter over cross slide 150 mm Distance between centers 750 mm Bed width 135 mm Spindle bore 29 mm Spindle taper MT4 Spindle speed control Stepless (2 ranges) Spindle speed ranges 50–1125 / 100–2250 RPM Metric threads 18 types (0.2–3.5 mm/rev) Imperial threads 21 types (8–56 TPI) Longitudinal feed rates 6 speeds (0.07–0.4 mm/rev) Tool post size 65 × 65 × 20 mm Max. tool size 12 × 12 mm Compound slide travel 70 mm Cross slide travel 130 mm Longitudinal slide travel 630 mm Tailstock quill diameter 30 mm Tailstock quill travel 70 mm Tailstock taper MT2 Motor power (S1/S6) 0.75 / 0.9 kW / 230 V MILLING HEAD Feature Value Max. drilling capacity 16 mm Spindle taper MT2 Spindle quill travel 50 mm Head tilt range –90° to +90° Spindle-to-column distance 170 mm Spindle-to-table distance 43 – 250 mm Spindle speed range 50 – 2250 RPM T-slots (number × width) 2 × 8 mm Motor power 0.6 kW / 230 V GENERAL Feature Value Machine dimensions (L × W × H) 1350 × 580 × 1630 mm Weight 230 kg Standard Equipment 125 mm 3-jaw chuck with reversible jaws Machine base Fixed centers MT2 and MT4 Drill chuck arbor and holder (MT2/B16) Change gears set Wrenches, grease gun, maintenance tools CE-compliant safety guards

Condition: used, machine/vehicle number: XLER6X2000510xxxx, mileage: 6,78,000 km, Year of construction: 2004, Please contact ATS Norway for more information Please provide reference number upon request: 20681 Specifications: Model year: 2004 Mileage: approx. 678,000 km Transmission: Manual Suspension: Full air Tires: See photos Length: 938 cm Width: 250 cm Wheelbase: 490 / 136 cm Curb weight: 10,100 kg Driveline: 6x2 Power: 420 hp Equipment: Tool compartment Tow hitch Bed Radio/CD Air conditioning / climate control Description:Scania R420 6x2 container truck, model year 2004.The truck starts and runs, but some repairs and investment will likely be required to pass EU roadworthiness inspection. Note: The container body is not included. Available for quick delivery upon agreement. Km: 678000 HK: 420 Technical approved: no EU-approved until: 12.07.2024 Own weight: 10100 Total Weight: 27000 Payload: 16825 Width: 250 Length: 938 Kodswqwmcopfx Aansfa Euro: 3 Model: R420 Gearbox: Manual

Condition: new, A container complex is for sale as a residential/accommodation and office building. The facility is new and consists of: - 34 20' XL (3m) office containers - 8 19' connecting containers with panels - 2 10' connecting containers with panels - 2 20' XL (3m) sanitary containers - 1 REI30 internal staircase landing - 1 Type 1250 steel external staircase, front end, variant 1, 5 kN/m² distributed load *Floor load: 300 kg/m² (ground floor), 200 kg/m² (first floor) *Fire protection: Connecting corridor in fire protection system EI30/REI30 *Thermal insulation: Insulation (U-values) according to GEG specifications, without GEG calculation *Floor covering: Factory-installed, with floor transition cladding at the coupling points *Heating, ventilation, Cooling equipment: Water-based wall-mounted radiators installed at the factory, Connection to be provided by the customer *Parapet cladding: / *Container frame color: RAL 9002 Gray White *Wall panel color: RAL 9002 Gray White Equipment: 64 office windows with tilt/turn fittings and roller shutters, triple-glazed insulated glass with gas filling 2 sanitary windows with tilt fittings, triple-glazed insulated glass with gas filling 1 steel exterior door, standard width: 875 mm 4 steel exterior doors, standard width: 1000 mm 7 door panels without door leaf, standard width: 875 mm 62 door panels without door leaf, standard width: 1000 mm Electrical equipment: 51 Single socket outlet, wet room electrical system 82 double socket outlets 1 double socket outlet, wet room electrical system 3 stove connection boxes, 400V/16A/5-pin 32 off switches 2 changeover switches 4 series switches, wet room electrical system 10 motion detectors Sanitary equipment: 22 ceramic hand basins, 500x410mm, including single-lever mixer tap Including 5-liter under-counter water heater 1 fiberglass 4-way wash basin, 2400x420mm, including single-lever mixer tap Kfodpfx Aswb Dv Ejanea 6 toilet cubicles, including toilet and paper roll holder, cistern with water-saving function 5 urinals, including push-button flush valve 1 privacy screen 6 floor drains 7 1 x GRP shower cubicle including single-lever mixer and shower curtain 1 x 80-liter boiler 2 x 300-liter boilers 6 x 170m³ exhaust fans 3 x 2kW fan heaters 2 x 500W electric convector heaters 34 x hot water radiators (without piping), type 21VM-S, 800 x 600 x 80mm Lighting: 2 x 8W LED glass lights 92 x 43W LED surface-mounted lights Exterior stairs: 1 x steel exterior staircase at the front, type 1250, variant 1.3kN/m² surface load Interior stairs: 1 x 3m interior staircase 1 x interior cladding material for the 3m interior staircase The system is still freely configurable in terms of interior fittings, exterior color, and layout. The project advertised represents This is a standard two-story building that can be used for a variety of purposes, including municipal use, school rooms, employee accommodation, refugee shelters, etc. We would be happy to provide you with a customized quote for your needs! We also offer financing, leasing, or rental options. Production currently takes approximately 3-4 months after receipt of order. Assembly, as well as the preparation of ready-to-submit construction documents, fire protection, building permits, and foundations are available upon request. We look forward to your inquiry.

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 1,600 kg, maximum load weight: 1,600 kg, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,500 mm, machine/vehicle number: cafe container, Office container | Snack container | Sales container | Cafe container | Model CAFE | 240cm x 600cm | High-quality and flexible solution Available products can be viewed in our warehouse and picked up directly. Our office and residential containers offer an excellent solution for a variety of applications. They are characterised by outstanding quality, highest flexibility, and short delivery times. Technical Details Dimensions: •  Width: 240 cm Kfedpowzk Hwsfx Aanea •  Length: 600 cm •  Height: 250 cm This uniquely designed container impresses with its fully glazed front facade, creating a bright and spacious sense of space with plenty of daylight. Inside, decorative wood details on the partition walls create a warm and stylish atmosphere. The remaining exterior walls are in a modern anthracite colour, providing an elegant contrast. With dimensions of 240 × 600 cm and a height of 250 cm, this container combines functionality with sophisticated design. On the container there is a stylish terrace with a safety railing and high-quality wooden floor. Directly in front of it is a veranda also clad in wood, harmoniously complementing the outdoor area. Access to the terrace is via a side staircase. The container is made of 2 mm thick galvanized steel and insulated with 40 mm polyurethane – ideal for use in different weather conditions. High-quality workmanship for long-term use Colours: •  Facade colour: RAL 7016 •  Frame colour: RAL 7016 •  Customization: Individual design possible according to customer's wishes Stock & Delivery: •  In-stock goods: shipped the same day •  Out-of-stock: production time depending on model 2 to 4 weeks •  Worldwide shipping: we offer professional shipping to all countries to ensure fast and reliable delivery. Custom dimensions: products can be manufactured to customer’s specific requirements. Showroom Address: Im Mannenberg 9a, 53557 Bad Hönningen For further information or customised modifications, we are happy to assist you!

Condition: used, operating hours: 4,500 h, Field of application: Construction Serial number: 30xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21752 Specifications: Kfedexvlc Tspfx Aansa Hours: approx. 4500 Capacity: 20 tons Winch Tires (see pictures) Outriggers New batteries Description:Kato KR-20 mobile crane with approximately 4500 hours.The crane is functional but no longer certified (last certified 11/2023).20-ton capacity.There is a contact fault in the horn, so it does not make a sound when the crane is extended.Can be delivered at short notice. Hours: 4500

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: D12L/8394, Offer Number: D12L/8394 Machinetype: wire nail press Make: WAFIOS Kodjw Nhwuepfx Aanofa Type: S75 Constr. year: 1970 wire diameter: 1,8-3,1 mm nail length: 10-75 mm output - pieces/min: 420 Location: In our warehouse

Condition: good (used), Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Pipe clamps: Two-part pipe clamp according to DIN 3567 -Type: DN400 / d1 = 406.4mm / 16" -Material: ST37-2 -Connecting elements: can be supplied at extra cost -Quantity: 40 set -Price: per set -Dimension: 570/220/H70 mm Kfedpfx Ajiqy Theanea -Weight.: 8 kg/set