Reefer van

Mercedes-Benz Sprinter 317 *Xarios350*-18°C*AHK2,0*zetelverwa...

Year of construction: 1996, condition: refurbished (used), Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, etc. The comminution takes place in the bottom part of the grinding chamber where the rotor plate fitted with grinding tools (hammers or pins) impacts and projects the particles against the liner in order to break them. Within the same chamber, the air circulation brings the fines to the rotating classifier wheel where oversize grains are rejected to then return to the griding zone for reprocessing, whereas the fine particles make it through the classification step to the next stage, normally the filter. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc and the classifier wheel, air volume, feeding rate, etc. Nljdpfx Abjkqlf Sj Uog Material of construction: stainless steel for product contacted parts Without wear protection Non Pressure Shock Resistant (NPSR), non-ATEX Scope of supply: Hosokawa Alpine ZPS 315 mill with motors, a set of grinding tools of choice and installation table

Condition: used, Year of construction: 2020, operating hours: 521 h, Internal vehicle number: VTC30048 Available immediately. More information at: Nledpfsza Nq Rsx Ab Ueg Luis Lucena Viktoria Sologubova Manitou MHT 10180 heavy-duty telehandler – 18-tonne lifting capacity – 521 operating hours High-performance Manitou MHT 10180 heavy-duty telehandler, manufactured in 2020, with just 521 operating hours. The machine offers a maximum lifting capacity of 18,000 kg, a lifting height of 9.63 m, and is equipped with a hydraulically adjustable fork carriage and pallet forks. Technical data: * Vehicle number: VTC30048 * Vehicle condition: Used machine * Category: Telehandler * Manufacturer: Manitou * Model: MHT 10180 * Series: 129M ST4 S1 * Year of manufacture: 01/2020 * Model year: 2020 * Operating hours: 521 hours * Maximum lifting capacity: 18,000 kg * Maximum lifting height: 9.63 m * Maximum reach: 5.56 m * Unladen weight with standard forks: 24,000 kg * Technical inspection: New * CE marking: Present Engine and drive: * Engine manufacturer: Mercedes-Benz * Engine type: OM 934 LA * Emission stage: Stage IV/Tier 4 Final * Cylinders: 4 * Displacement: 5,100 cm³ * Power: 129 kW (176 hp) * Maximum torque: 750 Nm at 1,600 rpm * Transmission: Hydrostatic * Forward/reverse gears: 2/2 * Maximum travel speed: 25 km/h * Traction force under load: 15,970 daN * All-wheel drive * All-wheel steering * Automatic negative parking brake * Hydraulic service brake Hydraulic system: * Variable hydraulic pump * Hydraulic flow rate: 205 l/min * Hydraulic pressure: 350 bar * Hydraulic oil tank: 290 liters * Hydraulically adjustable fork carriage Dimensions: * Overall length with implement carriage: 6.65 m * Overall width: 2.52 m * Overall height: 3.00 m * Wheelbase: 3.75 m * Ground clearance: 0.44 m * Turning radius (outer radius): approx. 5.50 m * Tilt angle: 12° * Dump angle: 105° Capacities: * Fuel tank: 315 liters * AdBlue tank: 63 liters * Hydraulic oil: 290 liters * Engine oil: 21 liters Cab and safety: Enclosed ROPS/FOPS cab, Level 2 Safety system according to EN 15000 JSM joystick control All-wheel steering Rotating beacon Work lights Cab protection grille Large-dimensioned off-road tires Noise level at the driver's seat: 80 dB(A) External noise level: 107 dB(A) Attachment: * Manufacturer: Manitou * Type: PFF + POS + DL * Serial number: 53010702 * Year of manufacture: 2019 * Self-weight: 1,900 kg * Rated lifting capacity: 14,000 kg * Load center: 1,200 mm * Hydraulically adjustable fork carriage * Pallet forks included Inspection and functional test possible by prior arrangement. Further information, photos, load charts, and videos are available upon request. Errors, changes, and prior sale reserved.

Condition: good (used), Regularly maintenanted telescop loader with bucket and snow blower Nsdoycwyfspfx Ab Uslg

Condition: used, Year of construction: 1987, functionality: fully functional, We are offering this used Pallmann PHP 8-12 grinding plant (hammer mill), year of manufacture 1987. The precise diagrams with all individual components are available. Nodpfoy Iu Rmex Ab Uelg

Condition: used, Year of construction: 2021, operating hours: 1,120 h, power: 53 kW (72.06 HP), Equipment: all wheel drive, front linkage, * German-made machine, first owner, in very good condition * TABMC040VK5115005 Njdpsy Ubgusfx Ab Uelg * Full service history * Road approval, 40 km/h * 4x4 all-wheel drive * Year of manufacture: 2021 * Operating weight: 6,200 kg * Tires: 340/85 R24 (front), 420/85 R34 (rear), approximately 80% tread * * I would be happy to send you a video via WhatsApp * WhatsApp: * Polish contact: [Phone number] * Sale only to businesses, no warranty, all information without guarantee, subject to prior sale.

Condition: like new (used), Refrigeration pack bought new in 2023 and never used. Cost almost £2 million, this was installed to run a spiral freezer and other machinery but due to the company going bankrupt, it was never commissioned. Extremely efficient to run compared to conventional systems. Nljdpfjwcwbqjx Ab Ujg

Condition: new, HR300 Rogi mini roller Rolling capacity ----- 1 mm Working length ----- 300 mm Roller diameter ----- 30 mm Nsdpsga Tzbjfx Ab Ujlg Weight ----- 10 kg

Condition: ready for operation (used), Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Nodsl Ra Uijpfx Ab Uolg Cutting range at 90° rectangular: 90 x 90 mm Cutting range in mitre at 45° rectangle: approx. 40 x 120 mm Saw blade speed: 33/66 upm Drive motor: 380 V, approx. 1.3 kW Required space: 850 x 600 x 1600 mm

Condition: good (used), Year of construction: 2001, total width: 700 mm, total length: 1,050 mm, total height: 1,400 mm, disc diameter: 250 mm, overall weight: 100 kg, Double brush polishing machine, with 2 exhauster stands, Motor 2-speed, 1,3 / 1,7 KW, speed 1400/2800 rpm., Dia brushes 250 x 25 x 60 mm, dimension 1050x700x1400 mm, weight 100 kg Njdpfxowhzh Es Ab Uslg

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 95 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,960 mm, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift, rigid ISO class: ISO class 2 = 1,000 - 2,500 kg Nedpfjzrcu Eox Ab Uelg Mast type: Telescopic Condition: Like new Technical condition: Very good Front tire type: Pneumatic Rear tire type: Pneumatic Rear tire condition: 80 - 100 % Rear work lights, front work lights, heater, full cabin, CE certificate, safety light, exterior mirrors, joystick, windshield wiper,