Tool and Cutter Grinder

Michael Deckel S 20

Condition: used, Year of construction: 2004, x-travel 3.000 mm y-travel 1.000 mm z-travel 860 mm Control Heidenhain iTNC-530 table-size 3.600 x 1.050 mm T-slots 7 x 18 T - slots distance 125 mm distance table - lower edge spindle 25-366 mm table weight 4.200 Kg b-axis +-105 ° c-axis +-360 0 rapid travel x/y/z 30.000 mm/min rotary table Durchm. 1.000 mm max. turning diameter 1.400 mm number of spindle speeds 9.000 U/min/rpm Chedpswqr Nlefx Addsf tool taper ISO-50 DIN 69871-AD spindle drive 28,5 kW max. torque on the spindle 240 Nm tool change unit AITEK, 40 fach 20 handwheel Ink. Shuttle operation Inkl Chip coveyor Ink. Internal cooling system 20 bar total power requirement 65 kW weight of the machine ca. 24,8 t dimensions of the machine ca. 8.056 x 5.496 x 3.790 mm

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 365, Hello, Manufacturer: Michael DECKEL Model: S22 E TURBO - Year: 2013 Condition: Used X-axis travel: 400 mm Y-axis travel: 310 mm Z-axis travel: 305 mm Workpiece diameter: 260 x 900 mm Grinding length: 400 mm Feed speed: 2000 mm/min Grinding wheel changer: 170 positions Tool changer: 8 positions Speed range: 5000 - 12000 RPM Chodpfx Aew Udxfjddsf Dimensions: L 2900 x W 1800 x H 2015 mm Weight: 3800 kg Standard wheel arbors and collets included Last maintenance and check-up performed in January 2025 by SIS Machine can be viewed under power

Condition: used, Year of construction: 2012, machine/vehicle number: Z452512A-43368, Drive: Wheel Empty weight: 7.583 kg Mast: articulated arm Lifting capacity: 227 kg Chedpfjtr Nm Asx Addef Working height: 1.600 cm Max. horizontal reach: 765 m Transport dimensions (LxWxH): 6.83x1.79x1.99 Please contact PFEIFER GROUP for more information

Condition: new, Extraction capacity of filter unit at spigot*: 2600 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 66 db(A) Cjdpfxspkwauj Addshf Dimensions L/W/H in mm: L 111 / W 508 /H 545 Colour: RAL 7035 Weight: 111 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request NEW: Pre-filter system (optional) Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil contents) and smoke, for small to very large machine workrooms | Oil mist separator. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as Option and can be controlled, for example, with a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: used, Year of construction: 1996, total height: 2,150 mm, total length: 1,420 mm, total width: 2,010 mm, overall weight: 3,100 kg, grinding spindle speed: 6,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 580 mm, CNC Universal 5-Axis Tool-and Cutter Grinder CNC Control HMC 400 CNC X-axis movement 400 mm Codpoxd Awqofx Addjhf Y-axis movement 250 mm Z-axis movement 580 mm C-axis (table rotation) ± 200° Max diameter grinding wheel Ø 200 mm Spindle speed (grinding) 3000 / 6000 R/Min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 8,000 rpm, Work table Clamping surface mm 3000 x 1000 Table height mm 750 Number of T-slots 6 Size of T-slots mm 18 Travel distance X-axis mm 2900 Y-axis mm 1000 Z-axis mm 700 Distance top edge of table - bottom edge of spindle Spindle lower edge min/max. mm 150 / 850 Main spindle drive for speed 8000 min-1 AC motor, frequency-controlled kW 16 at 44% duty cycle Speed range: min -1 15 - 8000 Torque at 44% ED Nm 96 constant up to min -1 1500 Feed drives X-axis AC servo motor kW 3.5 Y-axis AC servo motor kW 2.0 Z-axis AC servo motor kW 3.5 Rapid traverse speeds (X/Y/Z): m/min. 30/30/20 Indirect measuring system. Codpfx Adjw E Ey Hedshf Positioning accuracy Positioning accuracy X-,Y-axis to 1000 mm mm ± 0.0150 Repeat accuracy X-, Y-axis mm ± 0.0075 Positioning accuracy Z-axis mm ± 0.0150 Repeat accuracy Z-axis mm ± 0.0075 Tool magazine 2x 24-fold Design as disk magazine - Tool positions 16 - Tool shank (DIN 69871 / 69872) SK 40 - Max. tool diameter Tool diameter mm 76 - Max. Tool length mm 300 - Max. Tool weight kg 8 Machine control Heidenhain TNC 426 Splash guard cladding Covering of the entire work area, designed as partial area protection in accordance with the valid guidelines of the German accident prevention regulations (UVV) and the European standard EN 12417, with manually operated work area door including electrical protection and interlock. Machine door with polycarbonate glazing. 30 bar high-pressure coolant unit (IKZ) for the use of tools with internal coolant supply, switchable to 19 liters/min at 30 bar or 19 liters/min at 15 bar complete with separate paper band filter. Internal cooling is also possible with air Clean tank capacity l 500 Degree of filtration my 30 Filter capacity l/min. 120 Hinged belt chip conveyor instead of the chip collection tray with integrated coolant tank, ejecting to the right Discharge width approx. mm 300 Discharge height approx. mm 1050 incl. coolant system Tank capacity liters approx. 150 Delivery rate l/min. 30 Pump capacity bar 2.0 HR 410 HEIDENHAIN hand-held control unit External hand-held control unit with built-in electronic handwheel, connected to the machine via cable, for manual movement of the axes, with emergency stop button Grease - central lubrication documentation Operating and programming instructions Hydraulic and pneumatic diagram Circuit diagram Test log

Condition: new, Extraction capacity of filter unit at spigot*: 980 m³/h Total power consumption*: 0.71 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 68 db(A) Dimensions L/W/H in mm: L 1290 / W 345 /H 595 Colour: RAL 7035 Weight: 79 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Separation of emulsion mist, for medium to very large machine workrooms. Codpeh Rfbqefx Addjhf Your advantages of the COBARON series: - 15 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Available with a wide range of filters - High-quality filter media in the pre-filter and main filter area - Separation rates of up to 99.95 - Large range of mounting and connection accessories - Flexibly adaptable to the application - Optimum service life - Quality Made in Germany With COBARON, we offer a filter system that meets today's diverse processing possibilities and the resulting pollutant profiles. In the standard programme alone, the COBARON combination filter system offers various filter equipment variants and can thus be variably configured for many applications. The various configuration levels of the COBARON series were specially developed for applications that were borderline cases for many filter systems (mechanical or electrostatic). The combination of both proven filter principles in the appropriate application increases the effectiveness of the air filter and extends the service life. COBARON can be operated as a purely mechanical filter unit with different filter stages - or additionally configured with an electrostatic filter cell. Our filter units are already digitalised as standard and can be controlled with a laptop, for example.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Five-axis tool grinding machine in very good condition for sale due to lack of use! Csdpfx Adjxw Sxkjdehf

Condition: new, Extraction capacity of filter unit at spigot*: 2050 m³/h Total power consumption*: 1.04 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 69 db(A) Dimensions L/W/H in mm: L 1290 / W 588 /H 595 Colour: RAL 7035 Weight: 113 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Separation of emulsion mist, for medium to very large machine workrooms. Your advantages of the COBARON series: Cjdpfxjh Rfbxs Addjhf - 15 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Available with a wide range of filters - High-quality filter media in the pre-filter and main filter area - Separation rates of up to 99.95 - Large range of mounting and connection accessories - Flexibly adaptable to the application - Optimum service life - Quality Made in Germany With COBARON, we offer a filter system that meets today's diverse processing possibilities and the resulting pollutant profiles. In the standard programme alone, the COBARON combination filter system offers various filter equipment variants and can thus be variably configured for many applications. The various configuration levels of the COBARON series were specially developed for applications that were borderline cases for many filter systems (mechanical or electrostatic). The combination of both proven filter principles in the appropriate application increases the effectiveness of the air filter and extends the service life. COBARON can be operated as a purely mechanical filter unit with different filter stages - or additionally configured with an electrostatic filter cell. Our filter units are already digitalised as standard and can be controlled with a laptop, for example.

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, CNC Drilling and Milling Center Donau DANUSYS 2910, Year of manufacture 2002, overhauled Csdewymtqspfx Addehf Technical Data: Control: Heidenhain iTNC 530 Travel distances (X, Y, Z axis): 2900 / 1000 / 700 mm Milling capacity in St 60: 300 cm³/min Drilling in solid St 60: ø 40 mm Tapping: M30 Feed rate (X, Y, Z axis): 7 / 7 / 7 m/min Spindle: HSK 63, 15,000 rpm Coolant: internal (IKZ) and external (AKZ) Tool changer with 32 positions, divided into 2 x 16 slots Overhauled components: - Spindle fully overhauled and rewound by the manufacturer - Spindle controller repaired - Overhaul of Heidenhain power supply unit - Main computer (MC422) and control unit (CC422) checked (Heidenhain) - Carriage and guide rail of the Y-axis replaced Additional accessories: Handwheel HR 410 Chip conveyor with integrated coolant tank Documentation (operating manual, various manuals for installed components, circuit diagram, etc.) Sale ex stock; Subject to prior sale