Fork Lift

Mitsubishi FG20NT

Condition: used, functionality: fully functional, operating hours: 3,443 h, CLARK FORKLIFT LOAD CAPACITY: 50 Q. DIESEL NEW FORKS LENGTH: 1.80 MT. ORIGINAL FORKS LENGTH: 1.20 MT. (ALWAYS SUPPLIED) NEW SEAT WITH ELBOW REST MAX. LIFTING HEIGHT: 4.80 MT. Dedpfx Aswtffxsp Doku WORKING HOURS: 3,443 SERVICE CARRIED OUT IN MAY 2025 READY FOR DELIVERY

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 30,000 mm, total length: 65,000 mm, total height: 10,000 mm, GALVANIZED STEEL STRUCTURE FOR A 1,950 M2 WAREHOUSE Industrial warehouse with a floor area of 1,950 m2, designed for a location near the sea, with the following dimensions: Dodpfx Ajzuar Tep Doku DIMENSIONS: Width: 30 m (Exterior). Length: 65 m (Exterior). Height: 10 m (Clear Interior). Two-pitched roof with a 10% slope. Constructed with S 275 grade steel profiles, rolled and galvanized for the main steel structure, and galvanized formed sections for the secondary roof purlin structure. The finish of the Main Structure (Columns, Beams, and Trusses) will be hot-dip galvanized at 450°C according to UNE-EN ISO 1461:2009 standards. In the case of the THC profiles of the Trusses, they will also be galvanized on the inside, ensuring complete protection of this structure, both on the inner and outer faces of all its profiles. INCLUDES: - CE marking for steel structures according to UNE-EN 1090-2:2011. - Detailed engineering, calculation report, structural drawings, and foundation plans. - APPENDIX OF CALCULATIONS APPROVED BY THE ENGINEERS’ ASSOCIATION, complying with data, loads, and assumptions provided by the client. - Certified fasteners for the assembly of the structure. NOT included in the budget: Anchor plates and purlins. These can be manufactured upon request. Transport and packaging not included. Delivery conditions EXWorks, including loading onto a truck – Talleres Ruiz FCA – Pol. La Portalada C/ Nevera, 3 26006 Logroño (La Rioja) - SPAIN - Incoterms® 2020 CE marking and manufacturer's warranty with more than 60 years of experience in the sector.

Condition: used, Year of construction: 2019, operating hours: 5,900 h, Tracked excavator CAT 308E2CR, year of manufacture 2019, approx. 5,900 operating hours. Very good condition. Dksdpfsxnvlcjx Ap Dou

Condition: good (used), Year of construction: 1988, machine/vehicle number: 251500126, Offer 24156 Technical data: - Drilling capacity in steel ST 60 18 mm - Drill spindle mount MK 2 - Drill spindle stroke 100 mm - Drill spindle speeds approx. 340 - 2400 rpm Dodpfovxhdcox Ap Deku - Right and left rotation - Projection 250 mm - Max. distance table - drill spindle 670 mm - Table with 2 T-slots 320 x 280 mm - Height adjustable via rack with hand crank - Drive 400 V / 0.75 kW - Space requirement approx. W 500 x H 1750 x D 750 mm - Weight approx. 180 kg - with: - Keyless drill chuck

Condition: used, 150-Ton Lot of Industrial Fasteners Manufacturers: CHIEF / PGB FASTENER / FABORY Type: Industrial Fasteners (multi-reference lot) Industrial Applications Used in steel construction, industrial maintenance, machine assembly, and large-scale mechanical installations. Main Technical Specifications: - Quantity: 150 tons Dksdpfx Apjxdauts Dju - Composition: Bolts, screws, nuts, washers – various sizes and standards - Packaging: Pallet / metal crate - Multi-brand references: CHIEF, PGB FASTENER, FABORY 🧩 Machine Usage This bulk lot of industrial fasteners is intended for professionals seeking large-scale fastening solutions for maintenance, construction, or resale. Perfect for production workshops, maintenance companies, or industrial hardware resellers. ⚙️ Features / Differentiators Exceptional lot of 150 tons including a wide range of standardized industrial fasteners. Sourced from three reputable brands ensuring standard compatibility (ISO, DIN, etc.). Ideal for cost-effective bulk supply management. 📷 Detailed listing and photos available on request.

Condition: used, Year of construction: 2007, Technical details: throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 70 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,0 x 1,0 x 1,8 m hydraulic section steel shearing machine shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Punching station: -Punching force 60to -throat 640mm -table WxD = 1000 x 600mm -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: -Table W x D 430 x 380mm -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Please ask for accessories. Operation by foot switch Some accessories available. Please ask. Dkjdpsu Icmhjfx Ap Deu *

Condition: new, welding current max. 250 A open-circuit voltage max. 66 Volt connected load frequency 400 V Dksdpfx Apey Aa Ite Deu weight 65 kg Dimensions (LxWxH) 900 x 500 x 750 mm MIG/MAG gas-shielded welding machine: incl. 3m hose package.

Condition: used, Year of construction: 1991, Pressing force 1,500 kN Adjustable stroke 20 - 132 mm Ram adjustment max. 90 mm Stroke rate 50 / 75 strokes/min. Further data and images available upon request Used, the press was completely disassembled Not operational and requires mechanical and electrical overhaul Dkedpfx Aerm Nqmsp Dou Press is currently mechanically reassembled

Year of construction: 1990, condition: used, pressure 80 t throat 250 mm stroke 5/95 mm table surface area 805 x 510 mm distance table/ram Hub unten - 400 mm tool hole in ram 45 mm Dkodpfx Apofn Aqno Deu ram adjustment 100 mm ram surface 360 x 300 mm no. of strokes 55 Hub/min total power requirement 5,5 kW weight of the machine ca. 4 t dimensions of the machine ca. 0,83 x 1,7 x 2,6 m

Condition: excellent (used), pressure 125 t throat 400 mm stroke 6 - 125 mm ram adjustment 100 mm daylight (stroke down, ram adjustment above) 400 mm table surface area 1100 x 750 mm no. of strokes 60 Hub/min total power requirement 16 kW weight of the machine ca. 10 t dimensions of the machine ca. BxTxH 1,1 x 1,9 x 3,53 m - Machine is partially overhauled - was completely disassembled and technically checked, - new seals - new pneumatic clutch - new seals in the compensating cylinders - new drive motor - new ball spindle - new coloring - current UVV test and braking time measurement Dkjdpot Eix Rjfx Ap Dsu Machine safe for hand inlay work For an additional charge, we can equip the machine as follows: - Work area protection with BWS / cycle operation, but only in conjunction with a new control cabinet (separate) with ABB safety control and touch panel - 2-hand operation on separate stand