Refrigeration compressor

Mitsubishi NH465YJE

Condition: good (used), functionality: fully functional, total length: 2,750 mm, total width: 2,800 mm, total height: 1,830 mm, space requirement length: 2,800 mm, space requirement width: 2,850 mm, space requirement height: 1,900 mm, motor manufacturer: Bitzer, volume flow: 940 m³/h, Two used Bitzer screw compressor skids for low-temperature applications on Freon. Both skids are supplied with a shared control panel. Originally, each skid served its own cold storage room, but the capacities listed in the specifications are combined. Skid 1 is equipped with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Dedpsx Ap Hpsfx Aa Njcg Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, cooling capacity: 56 kW (76.14 HP), type of cooling: water, input frequency: 50 Hz, heating capacity: 67 kW (91.09 HP), fuel type: gas, "SANYO" PANASONIC ECO G Gas heat pump air conditioner Model: SGP-E190J2GU2W Nissan K25 Engine Power source: 230 V AC, 1 Phase, 50 HZ Max electrical input: 1,16 kW, 5,4 A (Continuous) Unit protection: IP24 Cooling capacity: 56 kW Dsdpfx Aasd Tiu Ee Njcg Heating capacity: 67 kW Heat input (HS)(Cooling): 43,5 kW Heat input (HS)(Heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high side: 30 bar Design pressure low side: 16 bar OUTDOOR USE ONLY! We have 4 pieces on Stock!

Condition: good (used), Refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, cooling machine -Manufacturer: Bitzer, Compressor Motor Compressor -Type: BHS 752 -Power: 4 kW / 1450 rpm -Volume flow rate: 28.11 m³/h Dcsdpfx Aasguztge Neg -Max. operating pressure: 24.5 bar -Dimensions: 640/450/H425 mm -Weight: 131 kg

Condition: ready for operation (used), Refrigerant compressors system Bitzer Type: HSK 6461-60-40P (x3) Volume: 165 m3/h (x3) Cooling capacity for R404A: 426 kW at 0°C/40°C, 351 kW at -5°C/40°C, 287 kW at -10°C/40°C, 185 kW at -20°C/40°C Dimensions: 3550 x 1050 x 1880 mm Refrigerant tank in set Items in magazine: 2 Reference number: Z77 Condition: Used in good condition Djdpjtqcqaefx Aa Nocg

Condition: used, Refrigerant compressors system Bitzer -Type: 4EC-4.2Y-40S (x3), 4EC-6.2Y-40S (x3) -Volume: 22.7 m3/h (x6) -Cooling capacity for R404A: 90.5 kW at -5°C/40°C, 73.8 kW at -10°C/40°C, 42.4 kW at -25°C/40°C -Dimensions: 1900 x 800 x 1800 mm Dcjdpfxew Raz Io Aa Neg -Items in magazine: 1 -Reference number: Z116 -Condition: Used in very good condition, ready to work

Condition: good (used), functionality: fully functional, RIVACOLD UNIT + EVAPORATOR Dcsdpfx Asxrr Rija Njg RIVACOLD Freezer Kit: - REFRIGERATING UNIT TYPE RV4B0905 COPELAND SCROLL ZF18KVE REFRIGERATING COMPRESSOR - RIVACOLD REFRIGERATING EVAPORATOR RX50334 The transport costs depend on the weight, volume and above all the distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require a telephone contact, so please ask about transport costs and other delivery methods to contact us by phone. Our contact details can be found in the seller's legal information. Payment in cash on delivery on site. We sell and export worldwide, thanks to our very large warehouse capacity we can also flexibly and quickly deliver larger quantities. Please contact us before purchasing. We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: good (used), Year of construction: 2020, functionality: fully functional, cooling capacity: 20 kW (27.19 HP), type of input current: three-phase, type of cooling: air, overall weight: 281 kg, input voltage: 400 V, total width: 600 mm, total length: 1,600 mm, total height: 1,800 mm, warranty duration: 6 months, heating capacity: 20 kW (27.19 HP), Aircooled chiller/Heat pump SYSTEMAIR SYSCROLL 20 AIR EVO HP 20 kW/20 kW Cooling capacity: 20 kW / 5.69 tons (12/7 — 35°C) Heating capacity: 20 kW / 5.69 tons (40/45 —7°C) Year of manufacture: 2020 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi Electric ANB42FPJMT (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump EBARA matrix 5-2t Dimensions: 1.6x0.6x1.8 m. Weight: 281 kg. Working hours: 2330 h. Condition: Good CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. Dcedpjwp Dq Sofx Aa Njg The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: like new (used), Year of construction: 2015, operating hours: 13,000 h, machine/vehicle number: EWADC22C-XS003, cooling capacity: 2,000 kW (2,719.24 HP), type of input current: three-phase, type of cooling: air, ambient temperature (max.): 46 °C, ambient temperature (min.): 35 °C, TECHNICAL SPECIFICATIONS Brand: DAIKIN Model: EWADC22C-XS003 Cooling Performance Cooling Capacity: 1933 kW Cooling Capacity (Kcal/h): 1,720,000 Kcal/h Energy Efficiency Ratio (EER): 2.63 Seasonal Energy Efficiency Ratio (ESEER): 4.02 IPLV (Integrated Part Load Value): 4.47 Evaporator Type: Shell & Tube (Direct expansion) Max. Water Side Operating Pressure: 10 bar Water Volume: 850 liters Nominal Water Flow: 92.2 l/s Water Inlet/Outlet Temperature: 12.0°C / 7.0°C Connection Diameter: 273 mm Insulation Material: Closed cell Condenser Type: Aluminum finned, internally grooved copper tubes Fan Type: Propeller type, glass fiber reinforced resin Fan Diameter: 800 mm Number of Fans: 30 Fan Motor Power: 52.5 kW Dsdpfsuma Thjx Aa Nscg Fan Speed: 900 rpm Nominal Air Flow: 160,327 l/s Compressor Type: Asymmetric single screw, semi-hermetic Model: 3 x HSA2690524 Quantity: 3 Oil Charge: 75 liters Control Mode: Stepless modulation (25% – 100%) Start Method: Star-Delta (Y-Δ) Refrigerant Type: R-134a Charge Amount: 360 kg Number of Circuits: 3 Dimensions and Weight Width: 2,285 mm Length: 14,785 mm Height: 2,540 mm Unit Weight: 12,600 kg Operating Weight: 13,470 kg Electrical Specifications Voltage: 400V / 3 Phase / 50 Hz Voltage Tolerance: 10% Nominal Running Current: 1100 A Max Starting Current: 1486 A Max Current for Wire Sizing: 1608 A Control and Automation Control Panel: MicroTech III Remote Monitoring: Modbus RTU, BACnet/IP, LonWorks, TCP/IP Temperature Regulation Accuracy: 0.1 °C Advanced Protection: High/low pressure, oil pressure, motor temperature, freeze protection, phase monitoring Sound Level Sound Power: 104 dB(A) Sound Pressure: 81 dB(A) 1 meter distance

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 18 h, Powerful mini dumper in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 17h Year of manufacture: 2024 SCHORR tracked dumper RR500DHKAS PRO – Discover the advantages: - 9.2 HP four-stroke engine - Self-propelled and powerful chain drive - Hydraulic bucket for self-loading - 500 kg payload - Large and high-quality tipping trough with a wide tipping angle - Foldable rider platform as standard - 6+2 gears The SCHORR tracked dumper RR500DHKAS features a hydraulic tipping drive and a payload of 500 kg, as well as a powerful 9.2 HP single-cylinder 4-stroke gasoline engine. The special feature of the RR500DHKAS is its hydraulically controlled bucket. With the help of the so-called "self-loader," you no longer need a separate shovel. Thanks to its slim design (740 mm), the mini dumper can even drive through narrow paths and narrow doorways. The mini dumper's powerful track drive allows you to easily negotiate rough terrain, inclines, and curbs. The rubber tracks provide secure footing in any work area. Raising and lowering the dumper/box is effortless and requires little effort thanks to the hydraulic tipping drive, even when fully loaded. Another advantage of the wheelbarrow is its extra-large hydraulic oil tank with oil filter. With a robust dumper made of thick sheet metal and a straight outlet that ensures quick and easy drainage, this dumper is a must-have for anyone who needs to transport heavy loads. Tipping on slight inclines is also no problem. Dedpfx Aaswh I Sdj Njcg The large tipping angle ensures that even fully loaded dumpers are completely emptied without you having to manually assist. TECHNICAL DATA: - Manufacturer: SCHORR - Manufacturer's type designation: RR500 - Model: DHKAS - Load capacity: 500 kg - Tilt drive: Hydraulic (infinitely variable) - Drive: Chain - Weight without/with packaging: 353 / 373 kg Drive - Engine: Air-cooled single-cylinder four-stroke engine (OHV) - Starter: Recoil starter - Power: 9.2 hp - Transmission: 6 forward gears / 2 reverse gears - Speed - Forward gear: max. 8 km/h - Reverse gear: max. 5 km/h Basic dimensions: - Total length of platform folded: 2350 mm - Total length of platform unfolded: 2550 mm - Total width (including bucket): 740 mm - Total height: 1050 mm - Container dimensions (internal dimensions): 740 x 665 x 435mm - Container dimensions (external dimensions): 1060 x 710 x 520mm - Track width: 710mm - Loading volume (liquid): ~ 200L - Loading volume (heaped): up to 370L (depending on load) - Drive chain dimensions: 180 x 60 x 38mm - Packaging dimensions: 1890 x 870 x 1220mm Filling height: - Side: 810mm - Front: 580mm PROFESSIONAL DUMPER WITH BUCKET The mini dumper relieves you of the arduous burden of having to move heavy wheelbarrows by hand. The attached, hydraulically controlled bucket also helps with this. SMOOTH-RUNNING AND ROBUST The mini dumper features a robust 6-speed transmission with two reverse gears. The dumper also features four eyelets for secure attachment during transport. We at SCHORR are happy to answer any questions you may have about our pallet trucks. You can reach our competent team by phone or email. We look forward to hearing from you and providing advice.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, saw blade diameter: 460 mm, cutting range round steel at 90°: 150 mm, working height: 1,030 mm, MSK 471 NA automatic straight cut circular saw Dsdpfeubbw Asx Aa Njcg for HSS and carbide saw blades Cutting range round up to 150 mm, square up to 140 mm Suitable for almost all profile shapes and solid material Automatic cut-off sorting by means of cut-off gripper Machine tested at KALTENBACH, wear parts replaced