Miyano ABX-64SYY
Miyano ABX-64SYY

Name: Miyano ABX-64SYY
Brand: Miyano
Availability: InStock

Year of construction

2023

Condition

Used

Location

Bristol

Show map

Machine data

Machine type:: Miyano ABX-64SYY

Manufacturer:: Miyano

Model:: ABX-64SYY

Year of construction:: 2023

Condition:: used

Price & Location

Location:: Bristol, UK

Call

Details about the offer

Listing ID:: A19750640

Reference number:: clu/OBO003

Update:: 11.08.2025

Description

In the market for a Top of the Range Miyano? Then have a look at this one! 18 months old and just over 1000 hours on the clock…it is as new! Still on site where it can be seen under power. The following is from Miyano’s Spec sheet: The Miyano ABX-64SYY – is a Top of the range, twin spindle, twin turrets with Y-axis on each turret. The ability to machine simultaneously at the left and right spindles using the upper and lower turrets, both featuring a Y-axis function, means that complete front and back machining of products with complex shapes can be accomplished simply and in a short time. High rigidity and high torque with 40 Nm driven tools. The use of rigid 40 Nm driven tool drives capable of heavy cutting ensures stable milling. Two turrets with a total of 24 tool positions, all driven, handle complex machining just like a machining centre. This machine also features the optional parts conveyor, Hainbuch collet chucks on both spindles, high pressure coolant, probing and a steady rest that’s mounted on the lower turret. Machining Capacity and Chuck System Maximum Machining Diameter of Bar Work SP1/SP2 ø64/51mm Collet Chuck SP1/SP2 Stationary Power Chuck SP1/SP2 6″/6″ hydraulic drive Standard Turning Length 125mm Spindle Spindle Nose SP1/SP2 A2-8/A2-6 Spindle motor(30min./Cont.) SP1 15/11kW SP2 7.5/5.5kW Spindle Speed Range SP1 50 – 5,000min-1 40 – 4,000min-1 SP2 50 – 5,000min-1 Turrets(Upper L/R Turrets & Lower Turret) Type of Turret 2 x 12 Station Turret Shank Height of Square Turning Tool □20mm Diameter of Drill Shank ø40mm ø20mm ø25mm Slide Stroke X1, X2 axis 190mm Z1/Z2 axis 550mm/721mm Y1, Y2 axis ±40mm Zs axis 756mm Rapid Traverse Rate X1, X2 axis 16m/min Z1/Z2 axis 30/20m/min Y1, Y2 axis 12m/min Zs axis 30m/min Driven Tools Maximum Number of Revolving Tools 24 Rotation speed of Driven Tools 60 – 6,000min-1 Driven Tool Motor AC Servo 4.5kW Machine Dimensions Machine Height 2,222mm Floor Space 3,290×2,204mm Machine Weight 10,900kg
Nsdpfx Aasw I D Dus Aodd
Name of the machine: Miyano ABX-64SYY

Seller

Registered since: 2022

21 listings online

Call

Send inquiry

Telephone & Fax

+44 117 3... show

These listings may also fit your interest.

Listing

CNC turning and milling center Miyano ABX-64SYY

Thurmaston

7,548 km

CNC turning and milling center
MiyanoABX-64SYY

Call

Condition: good (used), Year of construction: 2011, Maximum cutting length 118mm (spindle 1), 125mm (spindle 2), Maximum cutting diameter 165mm, bar capacity 64mm, spindle speed 4,000 rpm, sub spindle speed 5,000rpm, milling speed 6,000rpm, Ndedeu Hk Auopfx Aa Aod C axis 0.001 degrees, spindle power 15/11Kw, 12 station upper & lower turrets, Y axis +/- 40mm. Fanuc control, swarf conveyor, barfeed unit.

See details

Listing

Horizontal Turning Machine NAKAMURA-TOME WT-100

Italy

6,576 km

Horizontal Turning Machine
NAKAMURA-TOMEWT-100

Call

Year of construction: 2011, operating hours: 23,747 h, condition: ready for operation (used), General Data Machine weight 5650 Control Unit Brand FANUC Ndedpfx Aswn N Rbja Aod Model 31i Model A Main Drive Spindle speed range 6000 Spindle motor power 11/7.5 kW Turret Number of turrets 2 Number of tool slots 12 Media Chip conveyor Yes Additional Equipment TOP AUTOMAZIONI FU 342 bar loader This 3-axis NAKAMURA-TOME WT-100 was manufactured in 2011. It features a CNC FANUC 31i Model A, turning length of 503 mm, and a maximum turning diameter of 190 mm. The machine includes two motorized turrets with 12 tools each, a bar capacity of 42 mm, and a TOP AUTOMAZIONI FU 342 bar loader. If you are looking to get high-quality turning capabilities, consider the NAKAMURA-TOME WT-100 machine we have for sale. Contact us for more information. Application Types Turning

See details

Listing

5-axis universal machining center DECKEL MAHO DMU 80 T

Dieburg

6,868 km

5-axis universal machining center
DECKEL MAHODMU 80 T

Call

Condition: excellent (used), Year of construction: 2006, 5-axis CNC machining center 2006 Control: Heidenhain iTNC 530 Technical data: x-axis travel 880 mm y-axis travel 630 mm z-axis travel 630 mm Max. torque 130 Nm tool holder SK 40 (ISO 7388IIB) swiveling B: 103° Work table: Clamping surface 1,250 x 700 mm Rotary table diameter 700 mm rotatable C: 360 ° Max. table load approx. 500 kg T-slots 11x 14mm x 63mm Tool magazine: Number of tool places 32 (2x 16) pos. tool holder SK 40 (ISO 7388IIB) Max. tool diameter 80 / 130 mm Max. tool diameter with free neighbor box 160 mm Ndjdpfxown A Slj Aa Aed Max. tool length 315 mm Max. tool weight 8.0 kg

See details

Listing

Jasło

5,964 km

CNC lathe
DoosanPuma 2100LY

Call

Condition: used, Year of construction: 2017, Doosan Puma 2100LY CNC lathe with Y axis Year of manufacture: 2017 Fanuc i Series with Manual Guide Max turning length: 760mm Max turning diameter: 406mm Chuck: 210mm Samchully Spindle bore: 65mm Tool turret: 12/24 BMT55 Axis travels: X axis – 260mm Z axis – 830mm Y axis – 105mm Tailstock Renishaw probe Included with the machine: - 2 driven tool holders 1/1 - 8 standard tool holders Ndsdpow E Iwusfx Aa Aod - LNS chip conveyor - Coolant tank with pump - Machine documentation Low operating hours, very good condition

See details

Listing

Lüdenscheid

6,953 km

CNC lathe
GILDEMEISTERSPRINT 65 Linear

€34,500

ONO plus VAT

Call

Condition: good (used), Year of construction: 2007, - SIEMENS 840 D control - Bar capacity 65 mm - Main and sub spindle with speed 5,000 rpm - C-axis, Y-axis - 3 turrets, each with 12 stations (all driven) - Driven tool speed 4,000 rpm Ndsdpfx Aajuw Izve Asd - Tool holder VDI 30 with drive according to DIN 5480 TRAVELS X1= 165, Z1= 220 mm X2= 165, Z2= 150 mm X3= 165, Z3= 650, Y3= 80 (+50/-30) mm ACCESSORIES Coolant system Chip conveyor Bar loader TOP Automazioni XF 375

See details

Listing

CNC turning and milling center DMG MORI SPRINT 20-8

Warszawa

6,054 km

CNC turning and milling center
DMG MORISPRINT 20-8

€40,600

EXW Fixed price plus VAT

Call

Condition: used, Year of construction: 2010, functionality: fully functional, turning length: 300 mm, turning diameter over cross slide: 20 mm, turning diameter: 20 mm, spindle speed (min.): 10,000 rpm, spindle speed (max.): 10,000 rpm, spindle bore: 20 mm, rotational speed (max.): 10,000 rpm, power: 30 kW (40.79 HP), Turning and milling center complete with bar feeder LNS HYDROBAR MINI SPRINT bar loader(Maximum bar length 3,000mm) DMG MORI SPRINT 20-8 Control: Fanuc 310i Main spindle speed: 10.000 rpm Power: 5,5 kW torque: 14 Nm bar passage: max. 20 mm C1 axis: 0.001 travel Z1 axis: 80 mm Counter spindle speed: 10.000 rpm power: 5,5 kW torque: 14 Nm Njdpeq Nmm Eofx Aa Ajdd C2 axis: 0.001 Travel X2 / Z2 axis: 240 / 300 mm rapid traverse in X2 / Z2 axis: 40 m/min Tool carrier I (X/Y) Technology: Linear slide Internal machining: 6 stations tool holder: 20 mm External machining: 6 stations Tool holder: 12 x 12 mm Driven tool stations: 5 Tool drive: 3,450 / 6,000 rpm Tool holder: collet chuck, ESX 16 Travel in X/Y axis: 50/350 mm Rapid traverse in X/Y axis: 40/30 m/min Tool carrier II (Y) Technology: Linear slide internal machining: 4 stations tool holder: 20 mm External machining: 4 stations Tool holder: 12 x 12 mm Driven tool stations: 5 Tool drive: 3,450 / 6,000 rpm Tool holder: collet chuck , ESX 16 Travel in Y2 axis: 120 mm rapid traverse in Y2 axis: 40 m/min MACHINE DETAILS weight: 4200 kg Connected load: 30 kVA Operating voltage: 400 V / 50 Hz EQUIPMENT Chip management: chip conveyor Coolant management: Coolant pump Fire extinguishing system: Kraft + Bauer Oil mist extraction: Interface prepared Further equipment: Signal lamp

See details

Listing

Band Saw - Automatic - Horizontal MEP SHARK 230-1 NC HS 5.0

Germany

6,760 km

Band Saw - Automatic - Horizontal
MEPSHARK 230-1 NC HS 5.0

Call

Condition: new, 230 mm 230 x 230 mm saw band length 2950 x 27 x 0,9 mm table height mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions m SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with semi-automatic function for 0° cuts of mild steel, stainless steel, Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows CE based E FEATURES: - User interface with 7 touch screen display and mechanical buttons Ndedpefg E Hyofx Aa Aod for the operating functions of the sawing machine, guaranteed reliable Operation, simple and intuitive, and real-time control of all Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band

See details

Listing

CNC turning and milling machining center DMG MORI NLX1500SY/500

Bienne

6,984 km

CNC turning and milling machining center
DMG MORINLX1500SY/500

Call

Condition: excellent (used), Year of construction: 2020, operating hours: 4,800 h, functionality: fully functional, machine/vehicle number: NL154200702, Manufacturing origin: JP Voltage: 380 V / 50 Hz / 3-phase Net weight: 5,400 kg Customs tariff number: 8458.9100 TECHNICAL DATA Maximum turning diameter: 350 mm Turning length: 515 mm CNC control: M730UM MAPPS Celos Swing over bed: 923.8 mm Swing diameter above carriage: 755 mm Standard turning diameter: 260 mm Bar capacity: 34 mm Nsdpfx Aasw T Sn Eo Aodd Main spindle: Spindle speed range: 100 – 8,000 rpm Spindle motor power: 11 / 7.5 kW C-axis resolution: 0.001° Chuck diameter: 210 mm Subspindle: Maximum speed: 8,000 rpm Spindle nose: A2-5 Axis travels: X-axis travel: 260 mm Z-axis travel: 580 mm Y-axis travel: 100 mm (±50 mm) Turret: Number of turret stations: 20 Driven stations: 20 Tool shank diameter: 25 mm Maximum driven tool speed: 10,000 rpm Driven tool motor power: 5.5 / 3.7 kW Feed rates: Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse subspindle: 30 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse C-axis: 400 rpm Total power requirement: 31 kVA Approximate machine weight: 5.4 t Approximate machine dimensions: 4.0 x 3.0 x 3.2 m Errors and omissions excepted – data provided without obligation.

See details

Listing

Heavy Duty Lathe ZERBST DXP 5 / W15x15000

Oelde

6,922 km

Heavy Duty Lathe
ZERBSTDXP 5 / W15x15000

Call

Condition: used, turning diameter 3.200 mm turning diameter modified: 2.400 mm Nedpfx Aaswtrz He Ajdd turning diameter over slide 3.000 mm turning length max. 15.000 mm control Sinumerik 840 D Siemens workpiece weight max. 80.000 kg work accuracy (up to) 0,01 mm turning speed range - main spindle max. 50 min/-1 weight of the machine ca. 154,4 t dimensions of the machine ca. 20,7 x 6,0 m Heavy Duty Lathe ZERBST - DXP 5 / W15x15000 - measurement precision: < 0,01 mm Retrofit 2009 / 2012: - 2009: Control system upgrade to Sinumerik 840D - 2012: - New main gearbox, incl. main spindle drive - Installation of holding brake, incl. electrical integration - Modification and optimization of cylindrical roller bearings/bearings - Modernization: Control and safety technology

See details

Listing

Lublin

5,919 km

Tool grinder
ANCAfx5 linear

€80,000

EXW ONO plus VAT

Call

Condition: excellent (used), Year of construction: 2018, operating hours: 5,630 h, functionality: fully functional, machine/vehicle number: 551144, JG Group has an ANCA fx5 Linear for sale Loading system: Fast Load (not equipped with a robot) Special feature: Completely enclosed in the machine housing Application: Automation solution for small production volumes Access: Operator access from the front of the machine TECHNICAL DATA Maximum grinding spindle power: 9.5 kW Directly driven grinding spindle: yes Speed: 10,000 rpm Number of numerically controlled axes: 5 Grinding wheel diameter: 203.5 mm Grinding wheel changer: 2 sockets Axes X-axis: 384 mm Y-axis: 317 mm Z-axis: 217 mm C-axis: 230° A-axis: 360° A-axis rotation: 600 rpm Tool handling Suitable tool diameter: Ø2 - 20 mm Tool length range: 30 - 150 mm Ndjdpfx Aaswm H Hkj Aed Loading time: 20 seconds Number of Ø2 mm tools: 153 Number of Ø12 mm tools: 36 Tool measurement and control Measuring probe mounted on the grinding head: yes Tool profile measurement: directly on the machine without dismantling the tool MACHINE DETAILS Concrete machine base polymer: yes Mounting dimensions: 1930 x 2190 x 2015 mm Machine weight: 4500 kg Connected power: 14.5 kVA Tool holder included.

See details

Advertise here

Miyano ABX-64SYYMiyano ABX-64SYY

Machine data

Price & Location

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

Miyano ABX-64SYY
Miyano ABX-64SYY