Wheel Blast Machine

Modena CM T10

Condition: used, Spectro Gbedpfxju S Ahqj Ah Hog Type: SpectroMaxX LMD08 / LMX08 Date: 24.07.2020 Full analysis with the stationary spark spectrometer SpectroMaxX: With the help of the spark spectrometer, the alloy contents and accompanying elements of macroscopic solid samples can be can be determined with high precision down to the ppm range. Different analysis methods are available for the base materials iron, aluminum, magnesium, copper, nickel, titanium and lead, measuring methods adapted to the relevant alloy families are available. Advantages: Fast analysis within a few seconds Highly accurate spectral analysis including C and N Compact design (table-top device) Areas of use / application: Testing the chemical composition of 31 ferrous and non-ferrous metals Composition of 31 ferrous and non-ferrous metals metals, nitrogen and other elements Description of the system: Open spark stand for high sample throughput Wide range of sample geometries possible Simple change of base The following elements are available as a base: Al, Cu, Fe, Mg, Ni, Ti, Pb The analyzable elements and concentration levels depend on the methods available for the respective base element Usable wavelength range 170-670 nm Output of measured values in concentrations or intensities Selectable output units (%, ppm) Output of statistical characteristic values (mean value, RSD) SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm, the applicable and configured wavelength range is wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Optimized to customer requirements Expansion with additional modules possible on site Spark stand: Open spark stand for high samples Throughput and various sample geometries Minimized argon consumption thanks to argon saving module Optimized argon flow Reduced cleaning intervals Spark stand plate can be easily replaced Temperature-absorbing design without water cooling Integrated shutter system for optimum plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation and digital offline pulse control 32 MHz microcontroller Max. Spark duration: 4000 µs Max. Spark power 4 kW Display system: Separate microcontroller for each CCD Serial source interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic verification and identification of alloy/quality Results Manager Online maintenance scheduler Ambient conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity:

Year of construction: 2004, condition: excellent (used), Belt Monorail Shot BBlaster Brand: Rösler Gbedpfjn E Tubex Ah Heg Drum ø: 400mm Pieces length max.: 700/1000mm Pieces max. kg: 12 kg Loadingcapazity: 100kg Wheels: 4 Pieces á 7,5 kW Total Power : 45kW Garantie: 6 monatige Funktions- und Gewährleistungsgarantie bei Inbetriebnahme durch DECK Sarl. Ersatzteilversorgung für die nächsten 10 Jahre OPTIONAL: Lieferung in Ihr Werk Richtmeistermontage / Inbetriebnahme / Schulung

Condition: used, Year of construction: 2004, Used APV Anhydro model PSD 52 stainless steel (AISI 316) spray dryer. Unit rated 9,3 kh/hour water evaporation capacity at 350°C maximum air inlet temperature. Drying tower has diameter approx. 1000 mm x 700 mm height of straight side x 1100 mm conical height. Includes (1) rotary atomiser CMT model AF07 driven by 0.7 kW IBAG motor, diameter of wheel 63 mm, speed range 10.000 - 60.000 rpm. Unit also includes 12 kW electrical air heater, cyclone, fan and main switchboard with integrated control panel. Gedpfxjuk Ehxo Ah Hobg

Condition: like new (used), Year of construction: 2016, Cleaning system type W 60 C Machine body, internal pipe system, switch cabinet and washing basket in stainless steel Combination machine - turntable system with removable turning device and small parts basket - Basket diameter turntable wash basket 600 mm - Usable interior height 370 mm - Basket load rotary plate wash basket 100 kg - Usable interior height 530 mm - Dimensions of small parts basket 375 x 220 x 200 mm Mesh size 12 mm - Basket load small parts basket 20 kg Complete stainless steel design Pump(s) and external piping/fittings Version for operation with Liquids with a density of 1.3 due to reinforced pump with frequency converter Chip/particle filter with bath cover plate ECO flushing (loss of sink) for minimum water consumption Gjdpfx Asq Ewgkoh Hobg Water supply from the operator's mains supply with hot water supply on the machine side Hot air drying 1 x 4 KW Oil skimmer Pumping device/floor flushing with pump and pipe system in stainless steel

Condition: good (used), Tumble rubber belt blast machine Max. batch volume: 800 L Max. batch weight: 2000 kg Gjdpfx Aslf Hq Nsh Hebg Max. component weight: 150 kg Compartment diameter: 1350 mm Compartment width: 1350 mm Nr. Of turbines: 2 Power of turbine: 11 kW Max. turbine flow: kg/min Cleaner type: air Foundation: no Housing protection: Mn Req. air flow: yes Total width of machine: mm Total height of machine: mm Total length of machine: mm

Condition: used, Year of construction: 2017, Absolutely as good as new Consists of 1 measuring case 12-20mm Gbsdpfovvxvdsx Ah Hsg Consists of 1 measuring case 20-50mm Consists of 1 measuring case 50-100mm

Condition: new, functionality: fully functional, machine/vehicle number: NEW-5, empty load weight: 734 kg, maximum load weight: 2,766 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,840 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, Year of construction: 2025, brakes: other, New series! Rear tipper with standard electric tipping function and low loading height, braked tandem high-bed trailer with all-round foldable and removable aluminum drop sides, welded, hot-dip galvanized steel frame, wooden floor covered with steel plate, lashing points on the sides of the floor in a V-groove, automatic jockey wheel, 13-pin electrical system with reversing light, low chassis. Plus freight to Gera and vehicle registration document €250 net. Gsdpfx Ahsghpc Nj Hsbg Optional accessories available at extra charge: mesh sides, tarpaulin and frame, 100 km/h equipment, integrated loading ramps, support stands, etc. Delivery available at extra cost! Financing / leasing possible. Pictures are for illustration only, some shown with optional accessories at extra charge!

Condition: excellent (used), mileage: 3,80,592 km, power: 353 kW (479.95 HP), first registration: 08/2014, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro5, suspension: other, Year of construction: 2014, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, power mirror, soot filter, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Power brake booster - Speed limiter - Refrigerator - Air suspension - Media system - Particulate filter - Sun visor flap - Toolbox - PTO (power take-off) - Central lubrication system - Towing jaw = Further Information = Axle Configuration Brakes: Disc brakes Front axle 1: Tire size: 385/65/22.5; Max. axle load: 9,000 kg; Steering axle; Suspension: leaf spring Front axle 2: Tire size: 315/80/22.5; Max. axle load: 9,000 kg; Steering axle; Suspension: leaf spring Rear axle 1: Tire size: 315/80/22.5; Twin tires; Differential lock; Max. axle load: 12,000 kg; Suspension: air suspension Rear axle 2: Tire size: 385/65/22.5; Lift axle; Max. axle load: 8,000 kg; Suspension: air suspension Weights Curb weight: 26,875 kg Payload: 10,125 kg Gross vehicle weight: 37,000 kg Gjdpfjwa Np Ijx Ah Hsbg Functional Boom type: Telescopic (10 sections) Boom length: 26.3 m Lifting capacity: 16,900 kg Lifting height: 2,630 cm Crane: PALFINGER PK92002-SH H, year of manufacture 2014, mounted behind the cabin Body manufacturer: PALFINGER PK92002-SH H CE marking: yes Condition Technical condition: very good Visual condition: very good MANN MAURER TGS 35.480 8X4H-6 BL WITH PALFINGER PK92002-SH H CRANE EURO 5 L PACKAGE 480 HP DRIVE 8X4H-6 BL WHEELBASE 530CM LEAF / AIR SUSPENSION SLEEPER CAB WITH AIR CONDITIONING, REFRIGERATOR MEDIA SYSTEM, PHONE PREPARATION MANUAL TRANSMISSION TRAILER COUPLING FLASHING BEACON FRONT AND REAR TOOLBOX CARGO DIMENSIONS L=545CM, W=247CM PALFINGER PK92002-SH H 10 X HYDRAULICALLY EXTENDABLE PALFINGER WINCH KBW007-A 18M TOTAL 5 X EXTENSIONS CRANE CAN OPERATE IN FRONT OF CABIN VIA 1 X FRONT OUTRIGGER WIRELESS REMOTE CONTROL MAX. LIFTING CAPACITY AT 4.3M 16,900 KG MAX. WORKING HEIGHT 26.3M

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 7,500 mm, table width: 1,100 mm, torque: 1,178 Nm, table load: 42,000 kg, coolant supply: 36 bar, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, BRAND NEW GANTRY-TYPE MILLING MACHINE Gedpfx Ahjvrv Suj Hebg Control and Drives: Two HEIDENHAIN TNC 640 digital path controllers – one at the front of the machine and one at the rear in the cabin HEIDENHAIN package (motors, measuring systems, and handwheel) Additional equipment: Chain-type tool changer with dual gripper, 60-tool capacity Dual hinged belt chip conveyors (longitudinal), one at the front and one at the rear Accuracies: Positioning accuracy: ±0.040 mm Repeatability: ±0.008 mm Only inquiries from Germany will be answered.

Condition: good (used), Various heavy-duty roller conveyors as casting or cooling lines, ready for immediate use Gbsdpfx Ajd Tx Aheh Hjg