Forberg paddle mixer

Forberg Wijnveen Wynveen F-750

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request. Bjdpfx Aofg E Hpjfhocu

Year of construction: 2011, condition: used, Voltage: 400V, connected load: 5.5kW, including tools, machine was completely overhauled. Bcsdpedgvxasfx Afheu

Condition: good (used), POLY CLIP FCA3462 AUTOMATIC CLIPPER The POLY CLIP FCA3462 automatic clipping machine is designed for closing all types of casings (including protein casings) with a caliber of 40 – 115mm. PARAMETERS: * automatic device for cooperation with all types of stuffing machines equipped with a portioning machine Bodpfetr Ux Eox Afhscu * automatic loop feeder * stuffing expander (clipping protein casings) * automatic loop feeder * electric strip that discharges bars * electrical and mechanical connection with the stuffing machine * movable, pneumatic brake * string feeder ( clipping ring sausages) * casing end sensor * clipping speed: three speeds, maximum speed 90 tacts/min * pneumatic supply 6 bar DESCRIPTION OF OPERATION: The clipper is mechanically and electrically connected to a stuffer equipped with a portioning machine. At the beginning of the work cycle, a casing is put on the funnel of the clipper, and then the operator starts clipping the beginning of the casing. Then, after pressing the start button, the stuffer performs the set portion, after which automatic clipping takes place. Further work is carried out cyclically. PRODUCER: Poly Clip MODEL: FCA 3462 TYPE: Automatic clipper POWER: 400V HEIGHT: 190 cm WIDTH: 150 cm LENGTH: 150 cm WEIGHT: 620 kg MATERIAL: Stainless Steel

Year of construction: 2006, condition: excellent (used), Used Tietjen GD12 ex Atex Hammer Mill Bcsdpfx Afew Dv Aiehsu Including 200kW 1500 rpm motor (other options possible upon request) Year of manufacture: 2006 Atex compliant Including DA576 feeder Magnetic separator and air gravity separator

Year of construction: 1979, condition: ready for operation (used), A Gebr. Pfeiffer ball mill is available. Drive power: 330kW, diameter: 2400mm, length: 5000mm, number of motors: 2, motor weight: 180kg, flywheel width: 3.2mm. On-site inspection is possible. Bedpfxsv Dwirj Afhscu

Condition: good (used), in total 14 pieces available 3 x SEEPEX Nemo 1 x NETZSCH NM045, GETRIEBEBAU NORD, year: 2001 Bcodpfx Ajlhr Hfjfhou 2 x NETZSCH NM021BY, HANNING 0,75 kW, year: 2014 2 x ALLWEILER SEP 380.1A11P01, year: 1990/1992 2 x ALLWEILER AE1N25-ID, GETRIEBEBAU NORD 0,75 kW, year: 1996 3 x ALLWEILER AE1E550-ID, GETRIEBEBAU NORD 4 kW, year: 1996 1 x unknown brand, LEROY SOMER gearbox, 5,5 kW

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, power: 160 kW (217.54 HP), input voltage: 380 V, warranty duration: 12 months, year of last overhaul: 2023, Equipment: documentation/manual, 1 pellet press make: Buhler DPAB inner diameter die 660 mm Bcedpfx Afjrah Evsheu tread die 138 mm Press is equipped with 1 motor 160 KW . Press door is made of Stainless steel with overload valve in door. 2 Roll press with 2 rolls on the press overhauled in dimple or racked version Press is complete with die lifting device and tools The press is completely overhauled and equipped with new bearings and wear parts such as front and rear sliders die washer etc. Also new V-belts Also, all safety devices will be observed and appropriate switches on Friction protection , door switch and inspection hatches will be fitted.

Year of construction: 2022, condition: new, Aluminum angled conveyor belt with substructure Conveyor length: 1000mm flat + 2400mm rising Pitch angle in bend 45°C Discharge height: approx. 2000mm Height of the horizontal top edge 300mm PPU conveyor belt FDA Food compliant Bjdoht U Tdopfx Afhscu Conveyor belt EM 15/2 0+17 PU blue 7 white Belt width 400mm T20 studs welded - pitch 202mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 30mm sidewall high frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement -70/+35/-5/+190/-5/+30/-70mm Full-surface underlay sheet Drive: Motor approx. 0.25KW Belt speed approx. 0.3m/sec Connection 220/400V, 50Hz protection class IP54 Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grid, magnetic grid, metal separator, block magnet, filter systems

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, type of input current: three-phase, overall weight: 1,000 kg, input frequency: 50 Hz, nominal power (apparent): 250 kVA, type of output current: three-phase, Equipment: type plate available,

Year of construction: 2006, condition: used, Quadruple big bag filling system with weighing device Bcsdpfx Afjr Ai S Rsheu Dismantled in 2023 and overhauled in 2024. Plans and pictures on request!