CNC vertical milling center

MORI SEIKI MV

Condition: used, Year of construction: 1991, Mori Seiki MV-40B Gbedpfezwt Elex Ap Dou Year of manufacture: 1991 Control: Fanuc/Mitsubishi Travel distances X/Y/Z: 800x400x500 Machine weight: 6050 kg Condition: Still powered on, fully functional. Single-shift operation. Detailed video: ?is=jngWbKO9ybU__SsR Mori Seiki MV-40B Year of manufacture: 1991 Control: Fanuc/Mitsubishi Travel distances X/Y/Z: 800x400x500 Machine weight: 6050 kg Condition: Still powered on, fully functional. Single-shift operation. TECHNICAL DATA - MODEL: MV-40B TRAVEL Max. table travel (X-axis): 800 mm (31.50 in.) Max. saddle travel (Y-axis): 410 mm (16.14 in.) Max. spindle head travel (Z-axis): 510 mm (20.08 in.) Distance from spindle nose to table surface: 150 - 660 mm (5.91 - 25.98 in.) Distance from spindle center to stand front: 755 mm (29.72 in.) TABLE Table size: 1100 x 450 mm (43.31 x 17.72 in.) Max. table load: 700 kg (1540 lb) T-slots (number x size x spacing): 4 x 18 x 100 mm (0.16 x 0.71 x 3.94 in.) SPINDLE Max. spindle speed: 8000 min^-1 [Option: 10000, 12000] Number of spindle speed steps: 2 Spindle taper: No. 40 Front bearing diameter: 65 mm (2.56 in.) FEED Rapid traverse speed (X, Y): 20000 mm/min (787.40 in./min) Rapid traverse speed (Z): 590.55 mm/min (23.25 in./min) Cutting feed rate (X, Y, Z): mm/min (0.85 in./min) Manual feed rate (MF-M4): 0 - 1260 mm/min (0 - 49.61 in./min) [15 steps] Manual feed rate (MF-M5, MY-M4): 0 - 2000 mm/min (0 - 78.74 in./min) [20 steps] AUTOMATIC TOOL CHANGER (ATC) Tool shank: BT-40 Pull stud: 90° special type [MAS P40T-I 45°, II 60°] Number of tool positions: 20 [Option: 30] Max. tool diameter (with adjacent tool): 80 mm (3.15 in.) Max. tool diameter (without adjacent tool): 125 mm (4.92 in.) Max. tool length: 250 mm (9.84 in.) Max. tool weight: 8 kg (17.6 lb) Tool selection: Technical memory random MOTORS Spindle motor (30 min / continuous operation): AC 7.5 / 5.5 kW (10.05 / 7.37 HP) Feed motor (X, Y): 0.9 kW (1.21 HP) Feed motor (Z): 2.8 kW (3.75 HP) Lubricant pump motor: 0.025 kW (0.033 HP) Coolant pump motor: 0.18 kW (0.24 HP) POWER & AIR Electrical connection value (MF-M4): 30.6 kVA Electrical connection value (MF-M5): 31.2 kVA Electrical connection value (MY-M4): 40.2 kVA Compressed air consumption: 0.5 MPa (5 kg/cm²), 260 Nl/min TANK CAPACITIES Lubricant tank: 6 l (1.58 gal) Coolant tank: 135 l (35.64 gal) DIMENSIONS & WEIGHT (INSTALLATION) Max. height: 2770 mm (109.06 in.) Required floor space (W x D): 2480 x 2276 mm (97.64 x 89.61 in.) Total weight (including NC control): 6050 kg (13310 lb)

Condition: new, Year of construction: 2026, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, controller model: MAX 5, workpiece weight (max.): 11,000 kg, table width: 1,700 mm, table length: 3,000 mm, table load: 11,000 kg, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, We are offering the following machine directly on behalf of the owner. It was delivered in 2026, but due to a change in requirements, it will not be put into operation. The machine is in its original packaging and has not been used. 5-axis CNC portal milling machine, new Manufacturer: HURCO Type: DCX 32-5 Si Year of manufacture: 2025, delivery 3/2026 Control: MAX 5, 2 screens TRAVEL RANGES X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal columns: 2,130 mm Distance spindle nose–table: 66 – 966 mm SPINDLE / HEAD Swivel head CYTEC Tool holder: HSK63-A Speed max.: 18,000 rpm Power: 45/63 kW Torque max.: 106 Nm Rapid traverse: 15/15/10 m/min Tool changer / ATC: 60-position EQUIPMENT: - Internal cooling through spindle 40 bar - KNOLL band filter system - KNOLL chip conveyor - Direct path measuring system X/Y/Z - Workpiece probe RENISHAW RMP600 - Tool measurement: RENISHAW NC4 - Calibration sphere - Rotoclear - RITTAL spindle cooler - Enclosed protective cabin - LED work area lighting - Signal light - Coolant spray gun SOFTWARE OPTIONS: - Simultaneous 5-axis machining - Dialog / NC Mix - FANUC-compatible NC mode - Macro programming - Ulti Motion (10,000 block look-ahead) - STEP and DXF import - Automatic pocket and island recognition - Multi-touch SERVICES: - Warranty extension + 12 months - Commissioning by HURCO (including in Germany) MACHINE DIMENSIONS Footprint: approx. 9,982 × 6,815 mm Height: approx. 5,250 mm Gbjdpfx Aszl Hbcep Dju Machine weight: approx. 37,700 kg (transport approx. 45 t)

Condition: used, Mori Seiki MV45/45 machining center with Fanuc 11M control, travels X 820 / Y 555 / Z 550 mm, 4,500 rpm spindle (7.5 / 5.5 kW, BT 45) and Kitagawa 4th axis for simultaneous 4-axis machining. Professional through-spindle coolant retrofit by Deuschle Spindelservice — rotary union through the pull stud, hydraulic tool clamping with pressure intensifier, dedicated 15 bar pump switched via M50 — plus box guideways for exceptional rigidity, 2 mechanical gear stages delivering 200 Nm torque in low gear, and approximately 75 BT 45 tool holders (all with through-coolant passage) included. Box-guideway construction and 4-axis simultaneous capability make this a stable, versatile workhorse for complex parts. CNC CONTROL Controller: Fanuc 11M AXES Number of controlled axes: 4 Number of simultaneous axes: 4 X-axis travel mm: 820 Y-axis travel mm: 555 Z-axis travel mm: 550 4th axis / rotary table: Kitagawa SPINDLE Max. spindle speed rpm: 4.500 Gbodszy Svuepfx Ap Dju Spindle power kW (S1/S6): 7,5 / 5,5 Spindle torque Nm: 200 Spindle taper / interface: BT 45 Gearbox stages / speed ranges rpm: 2 COOLING Coolant through spindle bar: 15 EQUIPMENT & OPTIONS • Box guideways (flat slideways) — very rigid, stable machine • 4-axis simultaneous: Kitagawa 4th-axis rotary unit, hydraulically clamped, fully integrated in the control • Spindle with 2 mechanical gear stages — high torque, 200 Nm in low gear • Through-spindle coolant (IKZ) retrofitted by Deuschle: rotary union through the pull stud, hydraulic clamping/release with pressure intensifier, own 15 bar pump switched via M50 • Chip conveyor at the front, discharging to the right • Approx. 75 BT 45 tool holders included, all with through-coolant passage, plus about 20 pull studs • 4th axis (rotary table)

Condition: used, Year of construction: 1999, Mori Seiki MV-653/50 Heavy Duty Vertical Machining Centre. Serial No. 92 (1999) with MSG-502 Control, Table Size, 1700 x 660mm, 50 INT Taper, 80 Position ATC, High Pressure Coolant, Through Spindle Coolant, 15,000rpm Max Spindle Speed, Swarf Conveyor Please Noter: Nikken 500mm dia 4th Axis & Powered Tailstock not included can be purchased as a separate lot. Location: These lots are located in Swindon, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Godpfx Aoz Ar Atjp Dsbu

Condition: good (used), Year of construction: 2012, maximum machining diameter 380mm, maximum machining length 508mm, bar capacity 74mm, spindle speed 4,000rpm, spindle power 18.5Kw, milling speed 4,500rpm, milling power10Kw, sub-spindle speed 6,000rpm, sub-spindle power 5.5Kw, Y axis -51/+51mm, Gedpfxszaz Uzs Ap Debu 12 station turret, Mazatrol Matrix Nexus control, swarf conveyor, parts catcher , tool setter, 3 jaw chuck and Barfeed unit.

Condition: used, Year of construction: 1983, functionality: limited functionality, overall weight: 6,500 kg, The machine can be inspected by appointment. Gsdpfx Apezy Efio Debu Delivery is the customer's responsibility, but we can assist with packing and loading if required.

Condition: used, Year of construction: 1988, Technical details: x-travel: 800 mm y-travel: 410 mm z-travel: 510 mm control: Fanuc 10 MA rapid travel x/y/z: 20/20/15 mm/min table surface area: 1100 x 450 mm tool taper: BT 40 tool magazin:: 30 BT 40 max. tool length: 250 mm max. tool weight: 8 kg power requirement: 7,5/5,5 kW turning speed range: 6000 1/min weight of the machine ca.: 6,3 t Accerories 2 Chip conveyor, rear side disposal Under offer is a complete CNC tool shop, which will be given up due to old age of owner. The Mori Seiki is still highly accurate. All existing tool holders, tools, drills, vices etc. come with the machine. All measuring devices also come with the machine. Upon request orders for parts to be made can be passed on to new owner. This is a low cost all inclusive opportunity for a "Startup" Godsy S T T Uopfx Ap Dobu *

Condition: good (used), Year of construction: 2001, CNC turning machine Manufacturer: OKUMA Gbodpfx Aek Hz Iwep Dou Type: LB-250T Model: OSP-U10L YEAR OF MANUFACTURE: 2001 2-axis CNC turning machine with robotic loading Description: Two-axis X-Z turning machine for short workpieces, equipped with a robotic workpiece magazine X-AXIS: 180 mm Z-AXIS: 325 mm Spindle speed: 4500 rpm Coolant system and chip conveyor

Condition: ready for operation (used), Mori Seiki MV-Junior vertical machining center... Tool magazine for 30 tools, travel X: 560 mm; Y: 410 mm; Z: 460 mm, table size: 900x450 mm, maximum table load: 300 kg, maximum spindle speed: 8,000 rpm, total weight: 3,900 kg Gbodjx I D Syepfx Ap Dju

Condition: excellent (used), Year of construction: 1990, Mori Seiki MV-40 machining center Gsdey S T D Topfx Ap Debu Year: 1990

Condition: good (used), functionality: fully functional, lifting height: 10 mm, load capacity: 25,000 kg, For sale: Components for hoist P1600 / P2000 Main hoist motor 36/20 K6P P1600/P2000 Fine Gear FG36 Hoist gearbox P1600 / P2000 P2000 housing H20 P1600/ P2000 rope drum H20 P2000 bottom block 4/1, 25t, 20mm rope P2000 rope guide Traverse / sheave - rope pulley Gedpjv Uvftjfx Ap Djbu All parts in TOP condition Load capacity 25,000 kg / 25 t. Hoist motor 36/20 K6P Fine gear FG 36 20 hoists available for sale 2-stage trolley travel Fully functional Well below OEM list price

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 1764, controller manufacturer: Fanuc, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Godey Sluqspfx Ap Djbu Control: Fanuc EQUIPMENT Accessories as shown in the pictures

Condition: used, Year of construction: 1986, Technical details: x-travel: 800 mm y-travel: 460 mm z-travel: 510 mm total power requirement: 20 kW weight of the machine ca.: 8 t Vertical Processing Centre Gjdowvblaepfx Ap Djbu 20kW is the nominal value. The spindle only needs 7.5kW. It looks like 15kW will be enough. *

Year of construction: 1997, condition: ready for operation (used), Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Speed: 7000rpm, spindle power: 50hp, tool magazine: 80, dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. On-site inspection is possible. Gbsdpfjtx Dn Uex Ap Dsu

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 3449, travel distance X-axis: 800 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 700 kg, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 410 mm Z-axis travel: 510 mm Max. workpiece weight: 700 kg Max. spindle speed: 8,000 rpm Spindle taper: ISO 40 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,400 x 2,800 mm Total weight: 6,050 kg Gbsdpfx Apsyyi Ukj Dju EQUIPMENT 20-position tool carousel with ISO 40 tool holder Various tool holders Documentation Fanuc CNC control