Used 3D Probe for sale (2,682)

Condition: good (used), Year of construction: 2018, operating hours: 385 h, load capacity: 1,200 kg, lifting height: 1,350 mm, fuel type: electric, mast type: simplex, construction height: 1,850 mm, Manufacturer + model: TOYOTA SWE 120 S * EX * Miretti 3D / Zone 22 * Mast: 1F1350 ID: 26031.0053 Category: Demo Mast: 1F1350 Lowered height: 1830 mm Lift height: 1350 mm Capacity: 1200 kg Year: 2018 Operating hours: 385 hours Battery capacity: 24V / 300Ah Njdpfsyl Rrmjx Ah Rskw Options: * EX * MIRETTI - E8904 System / Certificate = ATEX 00032 Gas group = IIIB Temperature class = 135°C ( = T4 ) Type = Cat 3D (approved for ZONE 22) Wide track * EX * version – with CANTILEVER adjustable forklift forks - SUITABLE for all types of pallets - Width between support legs = 1220 mm !!

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 31 h, 3D Coordinate CNC measuring device Profitech Innometrik Advanced in gantry design (demo unit at a special price) Open Cable Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Technical specifications Measurement paths: X: 500mm Y: 600mm Z: 400mm Max workpiece weight: 250kg Weight of the machine: 850kg Dimensions over everything: 1290x1160x2350mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.2μm Volumetric length measurement deviation: MPEE = 2.2+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Nkededyah Sepfx Ah Rew Air consumption: 90NI / min Also configurable as a complete package with touch probe, software commissioning and training. (Annual maintenance & calibration can also be offered)

Condition: excellent (used), Selective DMG Mori Type: LASERTEC 30 SLM Selective Laser Melting Machine Technical Specifications: Build volume: 300 x 300 x 300 mm Layer thickness: 20-100 µm Materials: Tool steel, stainless steel, cobalt-chrome alloys, titanium, aluminum, precious metal alloys, Inconel Laser: Ytterbium fiber laser Laser type: YLR-600-WC Dimensions: 448 x 580 x 132 mm Nkjdpfxeu Ebv Ae Ah Rew Weight: 40 kg Cooling: Water Central wavelength range: 1070 ±10 nm Modulation frequency: 0-50 kHz Average power, max. 600 W Power adjustability: 10-100% Beam parameter: 0.37 mm x mrad Condition: used Scope of delivery: (See picture) (Subject to change and error in technical specifications and details!) We are happy to answer further questions by phone.

Condition: good (used), Stratasys Objet Model: Objet350 Connex3 + SUT70 USFL SOLO + WATER JET Technical Specifications: Build Volume: 342 × 342 × 200 mm Layer Thickness: 0.016 / 0.030 mm Resolution: Nksdox A S Atepfx Ah Rjw X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Dimensions and Weight: 1400 × 1260 × 1100 mm; 430 kg Cleaning Station SUT70 approx. 580 x 605 x 800 mm, 70 kg Materials: Rigid and opaque: VeroPureWhite™, VeroWhitePlus™, VeroBlackPlus™, VeroGray™, VeroBlue™, VeroCyan™, VeroMagenta™, VeroYellow™ Elastomeric: Agilus30™, TangoPlus™, TangoBlackPlus™, TangoBlack™, TangoGray™ Transparent: VeroClear™ and RGD720 Polypropylene-like materials: Rigur™ and Durus™ Temperature-resistant & biocompatible SHR print head system PolyLog material management system Incl. digital color options (more than 500,000) GrabCAD Print software Incl. OBJET 350 Connex3 support package Condition: used Last inspection 2024! Scope of delivery: (see photo) (Specifications and data subject to change and errors excepted!) If you have any further questions, please feel free to contact us by phone.

Condition: used, Used Renishaw MP3 touch probe Nedpsyddrwsfx Ah Rjkw Tool taper MAS BT 50

Condition: used, Used Renishaw MP3 touch probe Tool taper CAT 50 Nkedpjyddrqefx Ah Rjw

Condition: used, Used Renishaw MP3 touch probe Tool taper CAT 40 Nkjdpfx Aoyddrdsh Row

Condition: used, Used Renishaw MP10 touch probe Tool holder: capto C6 Nkjdpfx Aheyddq Te Rjw

Condition: like new (used), functionality: fully functional, Ferwood code: RS0003341 - Manufacturer code: S-22 M18 - Condition: As new (showpiece) - Functionality: Fully functional - Compatible machine: - If interested, we offer overhaul service, contact us. 1KG - 20X20X20 Nkedpfxeyb Sawo Ah Row

Condition: good (used), Year of construction: 2022, functionality: fully functional, 3D Scanner Solutionix D500 Year of manufacture: 2022 Feature Specification Camera technology: 2 × 2.0 MP cameras Light source: Blue LED Measurement accuracy: Up to 0.01 mm Point-to-point distance: 0.056 mm Scan area (FOV): 92 × 70 × 60 mm Measuring range: Up to approx. 120 mm Volume capture area: Up to 385 mm³ Turntable: Integrated, fully automatic Calibration: Fully automatic Texture capture: High resolution, no additional color cameras required Interface: USB 3.0 Type B Nsdpfjxvyiuex Ah Rjkw Software: ezScan 2017, compatible with Geomagic DesignX & ControlX Typical applications: Jewelry, precision mechanics, reverse engineering, cultural assets, 3D printing Assembly Table MT-400 Year of manufacture: 2015 Feature Specification Load capacity: Up to 400 kg Max. table size: 1200 × 1900 mm Height adjustment: Electric, stepless, 750–1150 mm (partially up to 400 mm stroke) Tilt adjustment: Electric, 0–90° Support frame: With variable extension up to 300 mm Plate fixation: Via vertical clamp or quick-release clamp Mobility: 4 swivel castors with total lock Installation aid: Roller strip for sliding the plate into the control cabinet Material: Powder-coated steel base frame, MiniTec standard profiles

Condition: used, functionality: unexamined, machine/vehicle number: EVO-lizer A4, Year of construction: 2015, operating hours: 4,413 h, total length: 720 mm, total height: 720 mm, total width: 540 mm, type of input current: AC, overall weight: 64 kg, input voltage: 230 V, input current: 4 A, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, positioning accuracy: 0.05 mm, table width: 270 mm, tank capacity: 11 l, table length: 195 mm, noise level: 46 dB, number of print heads: 2, Used FDM 3D Printer EVO-lizer A4 Device Data: Printer dimensions (W x D x H): 540 x 720 x 710 mm Weight: 64 kg Connection data: 230 VAC; 50/60 Hz; 4A Ambient temperature: 15 – 35 °C Ambient humidity: 30 - 70 % Acoustic Data: Idle mode: 40 dBA Operating mode (1 m distance): 46 dBA Operating mode (40 cm distance, door open): 62 dBA Technical Data Sheet: Print bed size (W x D x H): 270 x 195 x 205 mm Minimum layer thickness: 0.10 mm Positioning accuracy: 0.05 mm Nkjdoxu I R Dopfx Ah Rew Nozzle temperature range: 160 – 260 °C Print bed temperature range: 30 – 100 °C Filament material: ABS, PLA Filament diameter: 1.75 mm Software/slicing program: EVO-lizer

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 52181, Year of construction: 2013, operating hours: 40,000 h, Stratasys 3D printer. Printer purchased in March 2013 (original price: €120,000). Maintenance regularly performed by Stratasys. The machines are in top condition and fully functional. All printheads are in the printer. Nkodpfx Aowna R Ssh Row Machines ready for pickup.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 52178, Year of construction: 2013, operating hours: 40,000 h, Stratasys 3D printer. Printer purchased in March 2013 (original price: €120,000). Maintenance regularly performed by Stratasys. The machines are in top condition and fully functional. All printheads are in the printer. Machines ready for pickup. Nedpfxjwna N Uo Ah Rskw

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 52177, Year of construction: 2013, operating hours: 40,000 h, Stratasys 3D printer. Printer purchased in March 2013 (original price: €120,000). Maintenance regularly performed by Stratasys. The machines are in top condition and fully functional. All printheads are in the printer. Njdewna Nnspfx Ah Rekw Machines ready for pickup.

Condition: excellent (used), Year of construction: 2021, Renishaw Type: Equator 500 Year of manufacture: 2021 Item description: For sale is a Renishaw Equator™ 500, a high-precision industrial 3D measuring and inspection system designed for series production and process control on the shop floor. The Equator 500 is not a traditional coordinate measuring machine (CMM), but a comparative measurement system developed specifically for fast, repeatable measurements directly in the production environment. It is ideal for mass production, in-process measurements, and automated inspection routines. The unit is perfectly suited for checking dimensional accuracy, geometric tolerances, and position tolerances of workpieces, and can provide feedback to CNC machines. The software loads correctly, system status as per display: "Started OK" (see photos). Features & Application Areas: - 3D measurement of workpieces - Comparative measurement principle (very fast inspection cycles) - High repeatability in the micrometer range - Real-time temperature compensation - Suitable for shopfloor use - Automation ready (e.g. robot loading) - Ideal for series production, spot-checks, and process control Typical Industries: - CNC manufacturing - Metalworking - Automotive / supplier industry - Mechanical and tool engineering Technical Data (manufacturer information / approximate values) Manufacturer: Renishaw Model: Equator™ 500 (H+150) Device type: Comparative 3D measuring system / CMM Measuring range: X / Y: approx. Ø 500 mm Z: approx. 150 mm Measurement principle: Comparative coordinate measurement technology Temperature-compensated measurement Accuracy: Very high repeat accuracy Measurement accuracy in the micrometer range (depending on application and strategy) Control & Software Controller type: Equator 500 Software version: 2.5.21.1 RRTLOS version: 5.1.12 Operation via PC-based Renishaw software Electrical Data: Supply voltage: 230 V AC Frequency: 50 / 60 Hz Power requirement: approx. 1 kW Dimensions (approx.) Total height: approx. 1,900 mm Footprint / diameter: approx. 1,200 mm Weight (approx.): 130 kg Condition: used Nedsybbqxspfx Ah Rskw Scope of delivery: (see photos) - Renishaw Equator™ 500 measuring system - Controller / industrial PC - Monitor - Keyboard and mouse - Base frame - Accessories as shown in the photos (Subject to technical modifications and errors. All data provided without liability!) For further questions, we are happy to assist you over the phone.

Year of construction: 2022, condition: like new (used), functionality: fully functional, Quality scanner for glass, 2700 mm VIPROTRON Quality Scanner 3D Nkedpfxex Eczfs Ah Rjw Year of production: 2022 Quality scanner for glass With the Quality Scanner 3D you automate the monitoring of your glass quality at the highest level. The extremely effective quality control system with up to three different camera/illumination arrangements (brightfield, darkfield and reflection channel) is integrated directly after the washing machine in order to rule out pseudo errors. Each individual channel is focusing on specific types of defects, which are optically detected differently. The data comparison of the three channels enables a level of accuracy in defect classification that cannot be achieved with single-channel systems. Working height: 2700 mm For mounting on vertical glass processing or insulated glass production machinery Complete set-up ready for installation More technical information can be found attached as Tech. data file Excellent condition Very little used, as new As is Available immediately

Condition: used, functionality: fully functional, machine/vehicle number: SG76G34001, Year of construction: 2017, operating hours: 11,062 h, Trindo Digitalmanufaktur GmbH is offering a well-coordinated production system from the HP Multi Jet Fusion series for sale. The system is designed for industrial multi-shift operation and has been consistently maintained. System Components: • 1x HP Jet Fusion 4200 Printer (M0E85A) • 1x HP Jet Fusion Processing Station (M0E89A) with fast cooling function • 3x HP Jet Fusion Build Units (M0E92A) for maximized throughput Service & Maintenance Status: Active 3daas Contract: The machine is currently under an active HP Service Agreement (3D-as-a-Service). Advantage for Buyer: Since the system has been continuously maintained by HP, the normally costly and time-consuming manufacturer recertification upon transfer or relocation is not required. Condition: Fully operational. All wear parts have been regularly replaced by certified technicians as part of the service agreement. Nkedpfx Ahsyiz Nqs Rew Production Capacity: Thanks to the inclusion of three build units, the system is optimized for high-throughput operation. This allows for simultaneous workflows: • Printing process (Build Unit 1) • Cooling phase/unpacking in the processing station (Build Unit 2) • Cleaning and refilling/setup (Build Unit 3) Handover Terms: Location: Munich (Trindo Digitalmanufaktur GmbH) Documentation: Maintenance records and operating hours can be viewed upon legitimate interest. Inspection: An on-site demonstration of the system during operation is possible by appointment.

Condition: used, Mechanical scissor lift table with roller device - welding positioner, vessel rotator Ideal base for 3D welding table Load capacity 800 kg (maximum load with fixed castors) Load capacity 2000 kg (maximum load without fixed castors) Platform size 1800 x 860 mm Usable lift max. 690 mm Table height - bottom position 770 mm (without top frame) Table height - top position 1460 mm (without top frame) Table height - bottom with locking bolt 830 mm (without top frame) Table height - top with locking bolt 1080 mm (without top frame) Top frame height 80 mm Load capacity of rotator approx. 400 kg Roller spacing / axle spacing 155 to 685 mm Axle distance to top frame 190 mm Roller diameter 100 mm Roller width 40 mm - Scissor lift table is ideal as workbench, assembly fixture, welding table base, or with vessel rotator for pipe welding Nsdpjx U Eh Nsfx Ah Rokw - Mobile on 4 polyamide rigid castors Ø 125 mm, 2 of which are swiveling with brakes - Height adjustment via trapezoidal screw spindle and hand crank - 4 locking bolts for height adjustment, hole spacing 50 mm - Removable table top with forklift pockets - Roller spacing of polyurethane rollers on rotator adjustable in perforated pattern - Very robust construction made of square profiles with 5 mm to 10 mm wall thickness Required space (L x W x H): 1800 x 860 x 1200 mm Weight without rotator 470 kg Weight with rotator 620 kg Very good condition

Year of construction: 2012, condition: ready for operation (used), There are three Concept Laser M1 3D printers available, year of construction machine 1/ 2/ 3: 2009/ 2010/ 2012, operational hours counter machine 1/ 2/ 3: 82,046/ 93,781/ 68,167h, with Laser Rofin StarFiber 200, water cooling, screening machine and documentation, at machine 1 the laser is broken and the machine is without optics, machine 2 is fully functional, machine 3 is fully functional, but a machine software error occurs regularly, which has to be fixed, afterwards production can always be continued, an inspection is possible, Nedjnr Nr Hspfx Ah Rokw

Year of construction: 2006, condition: ready for operation (used), Max. workpiece height: 200mm, max. load: 150kg, length: 1300mm, width: 1274mm, height: 1940mm, weight: 1.1t. Nsdpfx Aheg E Uh Ue Rekw

Condition: excellent (used), We offer the FAM CHD-3D dicing machine, a versatile machine for dicing, slicing, and cutting a wide range of products: meat, cold cuts, cheese, vegetables, fruit, and vegetarian products. The device is ideal for food processing plants, in the production of ready meals, salads, frozen foods, and vegetable-meat mixtures, ensuring even cubes and high cutting repeatability with high line efficiency. Intuitive operation facilitates quick parameter setting and cutting set replacement. Nedpfeycc Izox Ah Rekw Technical data: Manufacturer: FAM Model/type: CHD-3D Dimensions (L x W x H): 2000 x 1400 x 1600 mm Power supply: 380 V, 50 Hz, 3N Power: 7.5 kW Country of manufacture: Belgium There are 2 such models available. The FAM CHD-3D dicer is a reliable solution for companies that want to increase cutting efficiency and improve the quality and repeatability of products in professional food processing.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, table length: 6,500 mm, type of input current: three-phase, type of cooling: water, compressed air connection: 13 bar, overall weight: 5,500 kg, total length: 14,800 mm, total width: 2,900 mm, total height: 2,525 mm, warranty duration: 24 months, year of last overhaul: 2026, working range: 6,500 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, fume extraction, safety light barrier, PFEIFER technology skyTUBE Pro 6500 X3 – Profile and Tube Laser Centre 6500 x 15–160 mm with bevel cutting up to 50° Nkedoyh A Nyspfx Ah Rjw skytube-pro-6500 X3 Profile and Tube Laser | Fiber Laser Metal Cutting for fast material change with up to 6kW — the smart and efficient tube laser processing solution for your production! Designed for round tubes, square tubes, rectangular tubes, open profiles, and special profiles. This laser cutting machine delivers maximum productivity, especially during production changeovers. The task: fiber laser up to 6kW for a wide range of metalworking applications. Unmatched Laser Cutting Performance High axis speeds and accelerations, paired with a stable mechanical structure, provide excellent cutting performance and accuracy. The tube and profile laser processing machine for production — space-saving and simply smart! Innovative solutions 100% made in Saxony! Tubes and profiles from 15 x 15 to 160 x 160 mm 3D cutting with efficient fiber laser technology The semi-automatic 6-fold profile tube loading chain system enables fast job changeovers. With the optional bundle loader, you can work completely independently. Bevel Cutting A function that changes everything. With our machine’s ability to swivel its cutting head up to 50° on an additional fifth axis, we address one of the biggest challenges in modern profile machining. If the laser beam always strikes the tube perpendicular to the surface, the cut edge will be elliptical. Swiveling the tube laser’s cutting head, combined with the feed axis, enables true bevel cutting. With the skyTUBE Laser, you are always on the safe side! The skyTUBE Pro is a class 1 laser system — there is no risk of exposure to laser radiation or reflections during operation. For all our laser systems, safety and compliance with the highest standards and regulations are paramount. Technical Features: · Closed industrial housing, class 1 or optionally class 4 laser · Working area, tube cutting system/clamping system: uniform tubes 15 to 160 mm, rectangular tubes 15 x 15 – 110 mm · Working area on tube X 6500 Y ±100 Z 150 A ±360° U ±50° · Automatic material feeding: up to 6 x 160 mm profiles, 3500–7000 mm lengths · Automatic material unloading system for profile sections, design matched to profile lengths · Z drive system: ball screw axis system with PTI SVZ system · X/Y drive system: linear axis system with PTI AC-SERVO system · Productive cutting speed: up to 50 m/min depending on material and laser combination (1.4G) · Software resolution: up to 2500 DPI · Repeatability: ±0.03 mm · Maximum footprint (W x D x H): 11,600 mm x 2,830 mm x 2,100 mm + unloading system, depending on required profile cut length. With standard version and 4.5 m automatic unloading, the total length is approx. 14,800 mm.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: Z50009537, Year of construction: 2018, operating hours: 167 h, total length: 50 mm, total height: 81 mm, total width: 57 mm, type of input current: DC, overall weight: 41 kg, input voltage: 220 V, table width: 305 mm, table length: 305 mm, For sale significantly below market value: a professional Replicator Z18 3D printer that has seen very little use (only 166 operating hours). Extra-large build area: 30.5 x 30.5 x 45.7 cm Features: - Supported by the new, user-friendly MakerBot Replicator 3D Printing Platform - Cloud-based system with application support - MakerBot Replicator Smart Extruder, motion controller, and new axis design - Integrated onboard camera and diagnostics, assisted calibration - Large build volume allows for rapid prototyping and model production - 11% larger print area than the MakerBot Replicator 2 Build volume: - 25.2 L x 19.9 W x 15.0 H cm - 7,522 cubic centimeters Nkodpfoxt Er Aox Ah Rew Easily and quickly produce realistic objects - On-demand printing capability - 100-micron resolution: print ultra-thin layers - Create professional-quality, high-resolution prototypes and complex models - Fine surface finish with no need for post-processing - Produce realistic prototypes and models for presentations Includes: - 3.5" color LCD display: onboard user interface for a rich user experience - Access your personal library and preview 3D files - Onboard utility for setup and maintenance MakerBot Replicator Smart Extruder (print head): - Easily replaceable - Detects filament outage and pauses printing automatically - Sends notifications to MakerBot Desktop and MakerBot Mobile app Onboard camera: - For print monitoring and sharing on MakerBot Thingiverse or social platforms - Mobile control option

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, machine/vehicle number: Seriennummer 90319000000, measuring range X-axis: 500 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 200 mm, Equipment: type plate available, The following components: XM-5000A 3D measuring system / serial number 9031900000. Nkedpfxoyi E Ikj Ah Rjw 2 measuring probes. LAPTOP for the XM production measuring system with measuring software on Windows 11. Measuring table for the production measuring system. User manual in German. Measuring range: X: 500 mm, Y: 300 mm, Z: 200 mm Measuring accuracy: (7+9L/100) micrometres Repeatability: ± 3 micrometres The system was only used for a specific measuring application for measuring parts in special purpose machine construction. No use in production. The system was delivered on 20.06.2024 directly from Keyence.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 140L-C, Year of construction: 2022, operating hours: 5,854 h, total length: 1,450 mm, total height: 1,040 mm, total width: 1,250 mm, type of input current: AC, overall weight: 380 kg, input voltage: 400 V, input current: 12 A, input frequency: 50 Hz, ambient temperature (min.): 10 °C, ambient temperature (max.): 40 °C, electrical fuse: 16 A, table width: 500 mm, tank capacity: 140 l, table length: 700 mm, power: 8.3 kW (11.28 HP), travel speed (max.): 24,000 mm/min, number of print heads: 2, Refurbished Industrial Fused Filament Fabrication (FFF) Printer Includes: - 140L-C printer - Vibration-damped platform - License for slicing software (Simplify3D) Original price €73,800 General Technical Data: Model: HAGE 3D-140L-C Year of manufacture: 2022 Operating hours: 5,854 h Printing technology: FFF (Fused Filament Fabrication) Filament diameter: 1.75 mm; open material system (not limited to specific manufacturers) Build area (L x W): 700 mm x 500 mm Maximum print height: 400 mm Maximum build volume: 140,000 cm³ Dimensions and Weight: Length: 1,450 mm Width: 1,250 mm Height: approx. 1,040 mm Weight: approx. 380 kg Temperature: Maximum printhead surface temperature: 300°C (optionally 450°C) Maximum build plate surface temperature: 180°C Maximum chamber temperature: 85°C Minimum operating temperature: +10°C Maximum operating temperature (ambient): +40°C Electrical Data: AC input: 400 V / 50 Hz Power supply: 24 V DC Nkedpfx Aoxuh Nysh Rew Connection: USB 3.0 / Ethernet Print Specifications: X-axis speed: up to 400 mm/s Y-axis speed: up to 400 mm/s Z-axis speed: up to 300 mm/min XY-plane print accuracy: < 0.1 mm Printer Control: Industrial controller (Sigmatek) Software: HAGE3D All documentation available Platform: 1,450 x 1,250 x 600 mm (LxWxH) Including storage compartments Including machine feet with vibration damping