Used Wilhelm for sale (152)

Condition: ready for operation (used), 2000 kg per hour capacity. Rasch TR is a precrystallizing machine (tempering machine) for chocolate masses, fat glazes, compound masses and similar fat products. The machine fulfills the requirements of precrystallizing, i.e. it forms smallest stable fat crystal modifications and homogenously disperses them in the melted mass, in an optimal way. Even low-fat masses, with a fat content of min. 26% can be precrystallized. Ingredients such as whole hazelnuts, all forms of chopped or broken nuts and certain dried fruits or small pieces of nougat may be included in the mass prior to tempering. Re-work can easily be integrated and handled. The mass-hopper is double-lined and equipped with a stirrer, so that any inclusions in the mass will be well dispersed. The hopper is heated with a warm water system so that the mass is free of crystals prior to tempering. The forwarding screw is a multi-start screw with a high gradient. The screw's depth is determined by the product to be handled, up to 16 mm deep for masses with nuts. The forwarding screw fulfils two objectives: First of all, it conveys the mass to the place of use with the help of a continuously variable drive. After that the mass crystalizing at the heat exchange surface is mixed with the mass inside the screw. This process guarantees the essential requirements of pre-crystallisation: creation of stable, smallest crystals and regular dispersion in the liquid mass. Rasch special tempering unit type TR is available in five different versions (500, 100, 1500, 2000 und 2500 kg/h). Screw can easily be removed and cleaned. Pgsdpfjw Apc Tsx Aaheu

Year of construction: 2007, condition: ready for operation (used), A glass and carbon roving production line (reinforcement mesh) Wilhelm Kneitz for the construction industry is available. 1) 3D production system consisting of two combined knitting machines Karl Mayer DG 6-30 2HS ELS, year of manufacture: 2007, working width: 2133.6mm, production capacity: approx. 800m²/8h, dimensions X/Y: approx. 8000mm/15000mm, weight: approx. 2600kg. 2) 2D production system consisting of one knitting machine Karl Mayer Cop HS 2-ST HG, gauge: 1/6inch, year of manufacture: 2012, working width: 2540mm, max. possible working width: 3505.2mm, dimensions X/Y: approx. 5500mm/8000mm, installation area X/Y: approx. 14000mm/18000mm. 3) Sample unit Karl Mayer Malimo 14022/PS-S2, year of manufacture: 1998, gauge: 1/6inch, optional gauge: 1/12inch, max. working width: 1270mm, installation area X/Y: 4000mm/6000mm, speed: approx. 800rpm. Documentation available. An on-site inspection is possible. Pgedpfxoxpw Tdj Aaheu

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1769, control type: manual, degree of automation: manual, actuation type: hydraulic, bending force (max.): 25 t, working width: 2,000 mm, stroke length: 60 mm, Machine weight 2400 kg Podpfexpf Txex Aahjgu

Condition: used, Year of construction: 1984, Technical details: x-travel: 950 mm Podpou Ndcyjfx Aahsgu y-travel: 255 mm z-travel: 250 mm spindle taper ISO: 40 / MK 4 range of revolution per miute: 45 - 2000 / 12 step U/min headstock swivable +/-: 90° vertikal = 90° rechts/links ° headstock swivable +/-: 45° vertical = 90° rechts/links ° feed:: (table) Tischvorschub: X/Y: 16 - 132 mm/min feed:: (table) Tischvorschub: Z: 8 - 66 mm/min clamping table: 1200 x 300 mm total power requirement: 5,4 kW kW machine weight approx.: 1,7 kg dimension machine xH: 1,6 x 2,0 x 2,0 m The spindle head can be swung out. Equipment: with coolant system with cooling water collecting tray Accessories div. milling cutters and milling shafts (comparable in the photo) *

Year of construction: 1965, condition: used, Press brake Factory Wilhelm Jonescheit type HYPM 125 -300 stroke 30 - 70 mm Psdpfx Aoillxysahjgu pressure 125 t weight 9150 kg

Condition: used, Item: D-5730-Dickow Pump Wilhelm Dickow, Type NCL 50/165 Pedpfx Aeiiyrkoahegu Centrifugal pump / explosion-proof centrifugal pump with shaft seal 7,5 kW, 2890 r/min

Condition: good (used), Wilhelm Haarmann KG, DM PU, Grinding machine Pjdpfobq Syyjx Aahjgu

Condition: ready for operation (used), Year of construction: 2010, A Wilhelm Kneitz textile knitting system for the production of load securing fabrics is available. 1) Base machine Karl Mayer, year of manufacture: 2010, gauge: 1/6, output: approx. 350m²–500m²/8h, max. working width: 3250mm, installation area X/Y: 9000mm/9000mm, control: PGRS. Includes various wear parts and a new gearbox. 2) Base frame for a new machine with a working width of 8m. Includes all materials and finished goods currently in storage. It is likely that a frequency converter connected to the cutting system needs to be replaced. Documentation available. An on-site inspection is possible. Pedpfxexpw Tke Aahsgu

Condition: used, pneumatische Blockleimpresse / pneumatic Block Gluing Press Wilhelm Leos BLPs Serial-No. 8487 Pgsdev R Hn Djpfx Aaheu Pressfläche Breite / Pressarea width max. 420m Einlegetiefe / Insertion Depth max. 500mm Fahrbar auf Rollen / mobile on wheels Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1969, grinding wheel diameter 150 mm no. of working stations 2 turning speeds 2800 U/min total power requirement 0,55 kW Pgjdpfx Aaswntymjhju - grinding wheel dia. 150 mm - polishing wheel dia. 125 mm

Year of construction: 1988, condition: used, Steel grinding machine Simon L 15 Right and left table support adjustable Psdpfx Aajhrza Nehjgu Diamond grinding wheel

Condition: refurbished (used), Commercial waffle iron v.Dedy 12-piece waffle iron Brussels waffle Table model Podpfsihf Snjx Aahegu New Teflon coating Unused after overhaul.

Year of construction: 1993, condition: ready for operation (used), Max. working length: 2600mm, max. pressing force: 700kN, stroke: 8-60mm, connected load: 8kW, weight: 4.5t, with documentation. Psdpfx Ajpcgy Aoahjgu

Condition: used, Pappschere - Board Cutter Wilhelm Leo'S Nachfolger 19030Serial-No. WLNS Pgedpfeh Axtlsx Aahju Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1990, condition: ready for operation (used), Was used for filling 10l milk bags, there is a second machine as a source for spare parts available. Psdpfx Asir U S Rjahsgu

Condition: used, machine/vehicle number: 15106, Buchdeckenrundemaschine - Book cover rounding machine Wilhelm Wolk BDRM Online-Video-Inspection by Skype-Video Pgodpfx Aoh Axckeahsu We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1963, condition: ready for operation (used), Including spare parts and some documents. Podsh A Rn Dopfx Aahjgu

Year of construction: 1986, condition: ready for operation (used), Volume: 29000m³, content: 29m³/l. Psdpouantnjfx Aahegu

Year of construction: 1981, condition: ready for operation (used), Travel X/Y/Z: 495mm/205mm/355mm, table clamping surface: 1060mm, spindle bore: 46mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 4300mm/2100mm/1750mm, weight: approx. 1900kg. Only with counter bearing for arbor mandrels, key, and hobbing arbors. The machine shows bearing noise and play on the X-axis. Documentation available. An on-site inspection is possible. Pgsdpfow Edptjx Aahju

Condition: ready for operation (used), nominal power: 201.153 kW (273.49 HP), 3 cardan driven rolls, therefore no slipping/skidding and also ideal for conical rolling - Digital readout - Electromagnetic clutch - 2 speeds (variable) 3 + 6 m/min - Engine: 220 HP/PK; 160 kWt - Rolling capacity: warm: upto 230mm - Rolling capacity: cold: 120mm - 2 liftingsystems included - Spare upper roll included of dia 700 mm - Has the option of section bending, axle dia: 320 mm!! Number of rolls: 3 Roll capacity cold: 4100 x 120 mm Roll dia upside: 900 mm Pgedpfexqh S Hsx Aahju Dia under roll - side rolls: 850 mm

Condition: excellent (used), Year of construction: 2019, Technical data: Pressure 10 bar Flow rate 1080 l/min Voltage 400 V Drive power 7.5 kW Weight 431 kg Noise level 63 dB(A) Air outlet 3/4" Dimensions (WxDxH) 1950 x 690 x 1700 mm with integrated refrigeration dryer, automatic condensate drain, oil-water separator Pgjdpfxexq Elwo Aahju

Condition: used, functionality: fully functional, spindle mount: MK 2, quill stroke: 120 mm, 1 pc. Gillardon column drilling machine, drill press in good used condition. Manufacturer: Maschinenfabrik Wilhelm Gillardon II Bretten i. Baden According to the information on the attached nameplate, the drill press is powered by a motor from VEM Elektromotorenwerke Thurm. Electric motor: Three-phase asynchronous motor, type KPER 80 K 4, VEM motors Thurm GmbH D Zwickau 3 speed ranges via belt drive. Quill stroke approx. 120 mm, drilling spindle with Morse taper 2 Weight approx. 150 kg / approx. 1380 RPM, MK2 drill column Power consumption 0.75 kW – mains connection 380 Volt, 50 Hz. Pgsdpfsh N Svlsx Aahju Price on request / special price All technical data subject to typographical errors/mistakes. Sale exclusively within EU countries.

Condition: used, Year of construction: 1982, overall weight: 950 kg, Abrasive belt length 2200 mm, abrasive belt width 400 mm, table length 1200 mm, usable height 120 mm, sanding width 390 mm, abrasive belt speed approx. 21 m/s, feed rates 6 - 11 - 16 m/min, main drive motor 7.5 kW, feed motor 0.26 - 0.55 - 1 kW, pneumatic belt oscillation and belt air jet, incl. chassis Pgjdpfx Aajxq Ehxehou

Condition: not inspected (used), Power connection 380V 5.5kW, right/left rotation, two electronically controlled speeds, spindle diameter 30 mm, spindle height adjustment via handwheel 180 mm, spindle not tiltable, 6 speeds: 3000/4000/5000/6000/8000/10000 rpm, dimensions (W x D x H): 1200 x 1200 x 1100 mm, weight approx. 1000 kg, complete with tenoning device / sliding table Podpfxjxqp Nge Aahjgu

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, Motor 7.35 kW 5 spindle speeds 3500-10000 rpm Milling spindle tilting 0-45° Sliding table length 1300 mm Electric height and tilt adjustment Electrically adjustable milling fence Milling fence completely foldable Max. tool diameter 250 mm Pgjdpfx Aaexbq Ulehju Fence jaws aluminium 550 mm Centrex milling guard Weight approx. 700 kg