Used Acoustic Enclosures for sale (1,384)

Condition: used, Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Dledjxx Tigspfx Addsa Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: excellent (used), Year of construction: 2017, Stock no.: 503657 Machine type/ Device type: Hot Runner Control Unit Manufacturer: Günther Model: DPT 5 Year of manufacture: 2017 Electrical Data: Connection voltage: per phase 200-250V AC, 50 to 60Hz, typically star connection Star connection: 3-phase network with neutral, 200-250V between L and N Delta connection: 3-phase network without neutral, 200-250V between two phases Load connection: IOA per channel (fuse 10A ultra-rapid = FF 10A) and 1 channel per phase with 16A (see maximum load per phase!). Phase load (5 channels per phase): maximum 25A Protection rating: IP 20 Dsdpjxx Tmrsfx Addsla Dimensions: (W, H, D) 468mm x 142mm x 345mm Weight: 13.0 kg Enclosure color: grey / blue (RAL 9018 / RAL 5015)

Condition: new, Year of construction: 2025, travel distance X-axis: 1,200 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 620 mm, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 48,000 m/min, rapid traverse Z-axis: 32,000 m/min, torque: 108 Nm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, workpiece weight (max.): 800 kg, table width: 600 mm, table length: 1,400 mm, table load: 800 kg, rotational speed (max.): 12,000 rpm, overall weight: 9,000 kg, coolant supply: 20 bar, spindle nose: SK 40 BIG PLUS, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 150 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, SPECIAL CLEARANCE SALE AT DISCOUNTED PRICE BRAND NEW MACHINING CENTRE Control and motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measuring systems, handwheel) Additional equipment: Prepared for 4th axis (rotary table) Full enclosure with side folding inspection windows Accuracies: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Dsdpfoxx S Tdsx Addsla This offer applies only to this LAGUN L1200 stock machine (interim sale reserved).

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 4,800 kg, ELB Perfekt 8 SPS, year of manufacture 1998, grinding area 800 x 400 mm, grinding wheel 300 x 50 mm, 4.3 kW spindle power, SPS control for automatic grinding cycle (roughing, finishing, sparking out, lifting), dresser mounted on spindle head with compensation. The machine is currently being overhauled by us: the grinding spindle is being newly fitted with bearings, the guideways are being hand-scraped. After the overhaul, the machine will meet the geometry of a new machine and is thus immediately ready for operation. Accessories: electro-permanent magnetic chuck 800 x 400 mm, water tank with automatic paper filter, partial enclosure. All functions are tested, and the machine can be demonstrated under power at our facility. We are also happy to handle installation and on-site training. Financing/leasing is no problem; we’d be happy to provide an offer! Dsdpfx Adorpz Evodola

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, AXILE G8 – High-Performance 5-Axis Machining Centre for Maximum Precision The AXILE G8 belongs to the top tier of modern 5-axis machining centres and is specifically engineered for demanding precision applications. Its integrated gantry design, high dynamic rigidity, and advanced automation options make it ideal for tool and mould making, aerospace, medical engineering, as well as complex single-part and small batch manufacturing. Technical highlights • 5-axis gantry construction for superior stability and minimal vibrations • High-dynamic linear drives / precision ball screws (depending on configuration) • Robust spindle (18,000–20,000 rpm, HSK-A63) with high power density • Swivel/rotary table with direct drive, perfect for simultaneous 5-axis machining • Large operating envelope for complex workpieces Dodpfxoxxh A Is Addela • Tool magazine capacity: 40–120 positions, depending on specification • Available with Siemens or Heidenhain control (depending on version), ergonomic and user-friendly • Rigid portal construction for optimal thermal stability and consistent precision Typical technical data (model dependent) • X-axis: approx. 670 mm • Y-axis: approx. 820 mm • Z-axis: approx. 600 mm • Table diameter: approx. 600 mm • Table load capacity: up to 500 kg • Spindle speed: 18,000 – 20,000 rpm • Tool holder: HSK-A63 • Magazine size: 40 / 60 / 120 tools • Control: Heidenhain TNC 640 or Siemens 840D sl (Values may vary according to year of manufacture and configuration.) Equipment & options • Full simultaneous 5-axis machining • Through-spindle coolant (IKZ) • Automatic tool measurement and breakage detection • Renishaw probing systems • High-pressure coolant system • Chip conveyor and internal enclosure rinsing • Modern safety enclosure & automation interfaces Application areas The AXILE G8 is ideal for: • Tool & mould making • Aerospace • Medical technology • Automotive prototyping • Mechanical engineering & precision component manufacturing Description This 5-axis machining centre stands out for its combination of dynamics, rigidity, and ultra-precise machining performance. Thanks to the gantry structure, the machine remains extremely stable even during long runtimes and high feed rates. Advanced thermal management ensures consistent accuracy, and the modern control system provides efficient programming and quick set-up times. The AXILE G8 is the perfect solution for companies seeking a reliable, powerful, and future-proof 5-axis machine. Currently, machines with Siemens and Heidenhain controls are in stock, also available with a 600mm table size.

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 1,800 kg, lifting height: 4,700 mm, free lift: 1,550 mm, fuel type: electric, mast type: triplex, construction height: 2,191 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, empty load weight: 3,413 kg, total length: 1,930 mm, drive type: Elektro, construction width: 1,180 mm, Electric 3-wheel forklift Load center: 500 mm Fork width: 80 mm Fork thickness: 40 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: New Front tire type: Superelastic Front tire size: 200/50-10 SE Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 140/55-9 SE Rear tire condition: 80 - 100% Battery voltage: 80V Battery capacity: 228Ah Battery manufacturer: Kion Battery year: 2024 Battery condition: New Description: Mast: VFHM 4700 h1=2191 h2=1140 h3=5740 Carriage: 6 roller, 1040 mm wide, ISO 2A !!!SPECIAL OFFER PRICE!!! Side shifter, 4th valve, rear work light, front work light, load protection grid, full free lift, CE certificate, safety light Additional hydraulics: double for VFHM mast Hydraulic control: multiple-lever operation, 4 individual levers for lifting, tilting and auxiliary hydraulics, located to the right of the seat Hydraulic system: multi-range universal hydraulic oil for temperatures from -20/+40 degrees Equipment: Comfort seat + ISO safety valve 3691 All-round open steel protective roof, front left access handle, rear right grab handle, USB charging port, panoramic mirror, acoustic alarm, speed reduction with raised load carrier (500 mm) Lighting: Strobe under the roof, protected Dlsdpfxexzv Hao Addea LED lights top right on the overhead guard, protected Front: 2 protected LED headlights with direction indicator Rear: LED tail and brake lights, direction indicators, hazard warning system LED on the overhead guard, top left and right, protected Speed assistant: Steering angle-dependent speed limitation reduces potential load damage by controlling curve speed accordingly.

Condition: used, Year of construction: 2017, operating hours: 6,777 h, functionality: fully functional, Basic version DW 3060-F “Buffalo” (Carrier Machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. mounting bracket Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, complies with EUROMOT IV emission standard Reinforced planetary gear 380 kW Additional hydraulic connection 20 l/min Dljdjxx Tfzspfx Addsa Hydraulic preparation for drive system Fuel tank 2 x 300 litres Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic centre section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electrical control system Roller reverse function via electric motor when engine is at standstill Automatically reversing fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional equipment: Hydraulic drive system SHREDDING SYSTEM SIZE “L” 600/4 COMPLETE Additional hydraulic connection 70 l/min Radio remote control Comb extension Size “L” Limiter Mounting for comb extension Limiter Size “L” Overband magnet for rear conveyor Frame for overband magnet Spraying system

Condition: good (used), Year of construction: 2016, operating hours: 16,977 h, functionality: fully functional, feed length X-axis: 140 mm, feed length Y-axis: 50 mm, feed rate X-axis: 18 m/min, edge thickness (max.): 3 mm, total length: 6,000 mm, workpiece height (max.): 60 mm, overall weight: 3,000 kg, SCM OLIMPIC K 800 - T-ERL EDGEBANDER EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): Specifications: -- Edge Capacity, 0.4 to 8 mm (0.016 to 5/16") for strip feeding. -- Panel Capacity, min. width 50 mm and 140 mm min. length, (2-3/8" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-3/8"). Equipped With: -- Adjustable In-feed Fence: Manually pre-set with digital indicator and pneumatic panel spacing device. -- Pre-Milling Station, RT-E: Spindles 2 x 3.0 HP, 12,000 RPM, (1) with PLC controlled jump action and manual digital indicators positioning. -- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed. Heat-up time approx. 10 Min. -- Pressure Section: Servo motor positioning, (4) pressure rollers, first larger, Teflon coated and powered. Workstations: -- End Trimming Station K-SEL: Front & rear 2 x 0.5 HP, 12,000 RPM motors mounted on THK guides, swivels 0 - 15, rapid set up between straight and angled cutting with the automatic swivel cylinder. -- Flush Trimming Unit: Top/Bottom, 2 x 1.0 HP, 12,000 RPM with 2 pre-set pneumatic positions, flush and overhang, remote pneumatic in/out positioning. -- Bevel/Radius Trimming Unit: Programmable, servo motor positioning, 2 x 1.0 HP - 12.000 RPM motors for change-over on the fly. -- Corner Rounding / Trimming Unit: For additional top & bottom trimming of linear an/or vertical leading & trailing corner when edgebanding all (4) sides, 2 x 0.8 HP - 12,000 RPM motor. -- Profile Scraping Unit "RAS/1000": Top/Bottom with (2) indexed manual pre-sets. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Glue Scraping Unit, "RC-V": Top/bottom flat glue scraper with pneumatic positioning through controller and air-blow off nozzle to keep the knifes clean. -- Buffing Unit "SPN": Top/bottom, oscillating 2 x 0.25 HP - 3,000 RPM motors, tilting up to 12. -- Hot Air Unit: Single blower with adjustable heat range and directional heat shield for top/bottom coverage. Restores color luster on thick pvc edging materials that my be lost during the edge scraping process.Operator Interface: -- Startouch Controller, 12" color touch screen, swivels 270 at in-feed of machine. Capable to store (100) programs, (6) at the touch of a single key. Graphical display of all working units. Tracks production data, diagnostic information and monitors maintenance schedules. Complete With & Features: -- Feed-speed, 36/52 FPM, 1 x 2.5 HP feed drive motor, 200 Hz frequency inverter for all trimming units. -- Electronic, programmable hold-down pressure beam positioning, lighted safety/sound enclosure cover and outboard panel support. -- Actual Model: OLIMPIC K 800 T-FR2 2 glue tanks + 1 glue tank for spare parts Djdpfxsxxy Rkj Addjla

Condition: used, mileage: 5,49,000 km, power: 350 kW (475.87 HP), first registration: 02/2021, overall weight: 19,000 kg, axle configuration: 2 axles, next inspection (TÜV): 06/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Engine 350 KW (476 PS), Euro VI, D, 2200 Nm, 2. Generation Motor OM471, High Performance Engine Brake, Automatik-Getriebe G 211-12/14,93-1,0 Mercedes PowerShift 3, Vorderachse, Differenzialsperre Hinterachse, Achsübersetzung i = 2,412, L-Fahrerhaus GigaSpace, 2,50 m, ebener Boden L-Fahrerhaus, Lochraster am Rahmen, durchgehend, Trittplatte über Rahmen, Teilabdeckung Rahmenüberhang 1050 mm, Haupttank links 720 L + 75 L AdBlue, second tank on the right 430 L, Alu Tanks closed, Sattelkupplung Standard, Jost JSK 37C, Sattelkupplungshöhe H = 150 mm, Sattelvormaß +600 mm, Scheibenbremse an VA und HA, Electronic braking system with ABS and ASR, power steering in case of overload, electronic fuel system with acoustic warning, Predictive Powertrain Control, Stabilitätsregel-Assistent (ESP), Spurhalte-Assistent, Abstandshalte-Assistent, Aufmerksamkeits-Assistent, Verkehrszeichen-Assistent, Active Brake Assist 5, Tempomat, Fahrerhauslagerung, komfort luftgefedert, Fahrerhaus-Kippeinrichtung mechanisch-hydraulisch, Frontscheibe getönt, Lichtsensor, Regensensor, Hebedach, elektrisch, Staufachaußenklappe, links, Staufachaußenklappe rechts, Staukasten links unter Fahrerhaus, Türverlängerung, Rampenspiegel, Frontspiegel, heizbar, MirrorCam, Sonnenblende außen transparent, Komfortschließanlage mit Zentralverriegelung, Fahrer-Schwingsitz Komfort, Beifahrer-Funktionssitz, Sitzbezug, Velours, Komfortbett unten, Komfortbett oben schmal, Multifunktionslenkrad Leder, Airbag Fahrer, Teppichbelag Motortunnel, Sonnenrollo seitlich Fahrerseite, Fensterheber elektrisch beidseitig, Tachograf digital, 2. Generation, ADR, Tachografhersteller VDO, On-Board Diagnose, Reiserechner, Multimedia Cockpit interactive, Wartungssystem, Remote Online, Vorrüstung Mercedes-Benz Truck App Portal, Sound-System, Navigationssystem, Fleetßoard Eco Support, Voraussetzung Fleetßoard Manager App, Truck Data Center 7, Vorrüstung für Truck Data Center 7, Vorrüstung für Mauterfassungn Vorrüstung CB-Funk 12 V DIN-Schacht, Steckdose 24 V/ 15 A, Beifahrerfußraum Einstiegsleuchten, in Türverkleidung, Umfeld Beleuchtung, Warmwasser-Zusatzheizung, Fahrerhaus Restwärmenutzung, Wärmeisolierung, zusätzlich, elektrische Standklimaanlage, Klimaautomatik, Flaschenhalter, Ablage für Papiere DIN A4, Staufachdeckel Fahrer-und Beifahrerseite, Schubladen unter Bett, Ablageklappen über Frontscheibe, Stove top in the shower under the bed, pressure relief in the driver's cabin, LED lighting, Halogen lighting, working lights, Markierungsleuchten seitlich, LED-Umrissleuchte, Seitenmarkierungsleuchten blinkend, Safety Pack, Climate Package, Chrom Paket, Interieur Dlodpfxow Scbgj Addea

Condition: used, mileage: 1,36,670 km, power: 375 kW (509.86 HP), first registration: 06/2023, overall weight: 33,000 kg, fuel type: diesel, color: red, axle configuration: 3 axles, next inspection (TÜV): 11/2026, brakes: retarder, gearing type: automatic, loading space length: 6,800 mm, Year of construction: 2023, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGX 33.510 6X4 BL new model with TajfunLIV timber loading crane First registration 06/2023 Mileage 136,670 km Crane operating hours 802 h GM cab, 2 bunks, additional cab insulation (thermal and acoustic), comfort driver’s seat with seat ventilation, swiveling passenger seat, fridge under the bunk, hot water auxiliary heater, electric glass sunroof, MAN Truck Navigation Professional with large 12.3-inch LED display, MAN sound system with subwoofer, high beam assistant, additional LightFix lamp bar with 4 spotlights. Wheelbase 4,500 mm Aluminum fuel tank 590 liters MAN TipMatic 12-speed gearbox, with off-road software Retarder STEERING BRAKE Full safety package with turning assistance, lane departure warning LDW, ABS, EBS, ESP, ASR, full brake assistant, emergency brake signal, emergency brake assistant. TajfunLIV timber loading crane L 150 Z 96 double telescopic, 400° slewing range, support leg bridge with 3,900 mm support width, high seat with weather protection roof and seat heating, crane control with 2+2 cross levers, wood grab with rotator. Djdpfjxwr Dgex Addsla PAVIC bolster body, loading length 6,800 mm, reinforced aluminum front wall, height approx. 2,600 mm, chassis completely covered in aluminum tread plate, 4x steel bolsters with aluminum stakes, load capacity per pair of stakes 7,000 kg. 2x frame protection benches. RENTING is the new BUYING – now immediately available with us on a full-service rental basis.

Condition: excellent (used), functionality: fully functional, mileage: 48,011 km, power: 73 kW (99.25 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, first registration: 02/2017, next inspection (TÜV): 04/2027, loading space length: 1,660 mm, loading space width: 1,225 mm, loading space height: 1,160 mm, emission class: euro6, color: white, number of seats: 3, number of previous owners: 1, Equipment: ABS, airbag, all-season tires, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, parking sensors, power assisted steering, sliding door, soot filter, traction control, truck registration, Very clean ex-lease vehicle with high-quality special equipment from first owner, non-smoker vehicle, Peugeot Partner panel van 1.6 Blue HDI 100 L1 Premium Car Play with specialized food hygiene catering conversion in the cargo area, Euro 6, version featuring an insulating, robust, seamless one-piece and fully washable PU coating for easy cleaning, all-round load securing rails, no refrigeration, also ideal for bakers, butchers, hunters, direct marketers, farm shops, etc. Audio system with Bluetooth and touchscreen, rear parking sensors, cruise control, 3-seater with Multiflex dual passenger bench seat, all-season tires, etc. Truck registration Euro 6 Dljdpfxsx Dlazj Addoa 3 seats Food catering hygiene conversion, one-piece, without refrigeration 3 load securing rails in the cargo area 6 recessed lashing points in cargo floor Cargo compartment lighting 5-speed manual transmission ABS with EBD Electric exterior mirrors Hill start assist Tachometer Third brake light ESP including traction control (ASR) Electric windows Cruise control and speed limiter Tinted windows 180° rear wing doors Height- and reach-adjustable steering wheel Diesel particulate filter Right-hand sliding door Power steering Multiflex dual passenger bench seat Immobilizer Central locking with remote control Rear acoustic parking sensors Audio system with Bluetooth and touchscreen Full-size spare wheel, 100% tread Tyres: 195/65R15 M+S all-season Load compartment dimensions: length 1,660 mm, width 1,225 mm, height 1,160 mm Full service history. Last service carried out in 03/2023 at 39,948 km. Vehicle available immediately. If you have any questions, we are happy to help by phone. The vehicle description serves solely to describe the vehicle and does not constitute any warranty in the legal sense. Accessories information without guarantee; changes, prior sale, and errors excepted! We are a member of the Federal Association of Independent Motor Vehicle Dealers (BVfK) and bear the BVfK quality seal!

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 25,000 m/min, rapid traverse Y-axis: 25,000 m/min, year of last overhaul: 2025, RepairFIT by Dornhöfer The Difference. Including installation and commissioning! Technical details of the machine: Year of manufacture: 2008 Control: Heidenhain iTNC 530 Travel range: X-axis (mm) 2,500 Y-axis (mm) 1,250 Z-axis (mm) 1,000 Rotary table size: Length (mm) 1,000 Width (mm) 1,000 Spindle speed range: 15,000 rpm Feed rates: X, Y & Z axes (mm/min): 10 - 10,000 Max. rapid traverse speed X, Y & Z axes (mm/min): 25,000 Milling head: Automatic milling head, vertical Tool holder: HSK 63 A Main spindle drive power: 100% duty cycle KW25 - Chip conveyor - Cooling lubricant system - 3D thermal expansion compensation - Portable electronic handwheel Heidenhain HR 410 with 3m spiral cable - INA RUE 45 linear guideway system on all linear axes with central lubrication - Complete splash guard enclosure RepairFIT is our proven offering for a profitable entry into our product lines. Dodpfev Rw Uujx Addjla The machines available in this line are procured by us following a rigorous selection process and subjected to a thorough inspection (deep dive check). After intensive cleaning, any obvious defects and faults identified are professionally repaired by our expert service team.

Condition: used, Year of construction: 2022, operating hours: 2,380 h, functionality: fully functional, Base package AK 315: Central axle trailer chassis with 2 axles, road approval for 80 km/h Braking system incl. EBS and lighting according to EU directive Tyres: 385/65 R22.5 50 mm EU drawbar eye including slip-on shoe Hydraulically adjustable support leg Splash guard (internal and lateral mudguards) Permissible total weight: 16,000 kg MTU diesel engine 6R 1000, 230 kW at 2,200 rpm, complies with EUROMOT V emissions standard Load-dependent feed control incl. automatic scraper floor reversal Hydraulically folding green waste grid basket with rear tailgate Impact plate with teeth Fuel tank: 300 litres Feed roller: Length 1,420 mm, diameter 510 mm, with mounted tooth segments Double-row flail drum with 16 free-swinging cast steel flail holders, replaceable flail tips, and 28 fixed ripping teeth Standard: “Streusel plus” flail tip Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raise/lower support leg, open/close rear basket, fold/unfold rear conveyor, release travel drive) when engine is off 24-V electrical control Separate control box at the rear of the machine Scraper floor with 29 slats Chain drive feed roller and scraper floor Extended radio remote control with 2 foot switches Acoustic start-up warning Rear conveyor: 6 m, 1,500 mm wide with anti-magnetic center section Reinforcement plates (Hardox) on both sides of the feed hopper for the side walls (loading edge) Travel drive preparation Fire extinguisher Doppstadt telematics system Paint finish: RAL2011 deep orange Djdpexx Sdpsfx Addela Optional equipment: Hydraulic travel drive Extended radio remote control with foot switch “Bear Claw” flail tips Fine-shredding basket Watering system Lighting package: engine compartment and rear conveyor Delivery date by arrangement

Condition: used, Standard Machine Specifications Table: Working surface: 305 x 305 mm Max. workpiece capacity: Ø 500 mm x 560 mm Max. table load: 250 kg Travel: X-axis: 510 mm Y-axis: 510 mm Z-axis: 490 mm Axis: 0.001° – 360° Distance from table top edge to spindle center: 40 - 550 mm Distance from table center to spindle nose: 100 - 590 mm Spindle: Spindle taper: NST No. 40 Speed: 20 – 20,000 rpm Drive: 4-stage gearbox (2 mechanical, 2 electric) Max. torque: 157 Nm Feed: Rapid traverse X, Y, Z-axis: 50,000 mm/min Rapid traverse 4th axis: 9,000°/min 90° rotation of the 4th axis: 0.6 seconds Cutting feed rate X-, Y-, Z-axes: 40,000 mm/min Tools: Tool positions: 40 Tool selection method: direct control, bidirectional Tool holder: BT (SK) 40 Max. tool diameter: 95 mm (150 mm if adjacent positions are empty) Max. tool length: 300 mm Max. tool weight: 10 kg Tool change time (tool-to-tool): 1.7 seconds Tool change time (chip-to-chip): 5.0 seconds Motors: Spindle motor (30 min./continuous operation): 11.0 kW AC Tool changer motor: 400 W AC Cooling system motor: 1,200 W AC Pallet: Pallet change time: 6.0 seconds Other: Power supply: 25 KVA, 200 V AC, 3 phases Air supply: 5 bar, 330 l/min Dimensions: Machine height: 2,940 mm max. Djdpjv Si Susfx Addsla Footprint with chip conveyor: 3,492 mm x 3,173 mm Weight: 9,900 kg Control system: Fanuc 16iMB Standard machine accessories Spindle with 20,000 rpm and 4-speed gearbox (2-speed gear drive, 2-speed electronic gearbox) 2 spindle bearing compensation within 0.005 mm (IAC system 1) Big Plus spindle (contact in the taper and on the Front face) Automatic spindle cleaning with compressed air Coolant through spindle at 15 bar and its own pump Spindle bearing lubrication system (air-oil mixture) Spindle cooler Automatic lubrication of the X, Y, and Z axes Automatic high-speed tool changer with 40 tool stations Fixed tool location: each tool is coded independently of the machine and identified in the magazine Original Kitamura tool hold function through T-code pre-selection Automatic pallet changer, 180° reciprocating (2 stations) Coolant pump 1,200 W Double-deck chip conveyor with 2 chip conveyor belts for coarse and small chips, with filter system Chip flushing at the bottom with a separate 1,200 W pump Fully enclosed Enclosure Automatic central lubrication of the guideways Air FRL unit (filter, regulator, lubrication) Hydraulic power unit with tank Work light End of cycle lamp Compensating thread cutting 4 free M functions, M20 – M23 Pivoting control panel Portable handwheel RS 232C interface PCMCIA interface Door lock Emergency stop switch on the tool magazine Manual indexing switches on the tool magazine Self-diagnosis function

Condition: used, functionality: fully functional, Year of construction: 2015, Machine - Enclosed machine frame - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Enclosed beam guidance using fiber optic cable (LLK) - Machine cooling unit (water-air) - Integrated control cabinets with interior lighting - Power supply to TruDisk via the machine - Longitudinal conveyor belt - Work area lighting Dedpfsxw Uryjx Addola - Positioning laser diode - Oil spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk with 1 fiber optic output - Laser cooling unit (water-air) - Excitation via pump diodes - Laser power control Cutting Unit - Universal cutting unit with fully adaptive lens system - Single cutting head strategy - Protective glass against lens contamination - Protective glass condition monitoring - ControlLine: height control and sheet metal edge detection Control - Advanced workshop programming (TruTops via network access) - Fast repeat production - 17" touch color screen - Integrated technology data - Automatic shut-off - Programmable selection of cutting gas/pressure - ContourLine - Microweld - FastLine - FlyLine - AdjustLine - Teleservice via Internet - Integrated e-shop Data Transfer - USB interface - RJ-45 network socket Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extractor - Machine enclosure with certified viewing window (right door) - Roll-up roof Special Equipment: • 3001 on TruDisk 4001 • Extended pallet extraction • Dust protection device panel • Viewing window left • Side viewing windows right • Storage interface • Brightline Fiber • Titanium cutting package • Brass cutting package • Copper cutting package • Nozzle changer

Condition: used, mileage: 19 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 08/2025, next inspection (TÜV): 12/2027, loading space length: 3,272 mm, loading space width: 1,787 mm, loading space height: 1,519 mm, emission class: euro6, color: white, number of seats: 3, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal vehicle no.: 153225 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (ZIP 49076), Prof.-Porsche-Str. 7 * Tel.: Dodpfew N Uzyjx Addola Exterior * Electrically folding exterior mirrors * Heated and electrically adjustable exterior mirrors * Grab handle for loading area sliding door on partition wall * Wheelbase: 3,665 mm * Sliding door, right side Interior * Driver's seat armrest * Outside temperature display * Double passenger seat * Roof light(s) in load/driver's compartment with door contact * Full-length partition wall Safety * Adaptive brake light * Driver airbag * Passenger airbag Comfort and Environment * Attention Assist * Hill start assist * ECO start/stop function * Light assistant * Mercedes-Benz emergency call system * Multifunction steering wheel * Rain sensor * Gearshift indicator * Crosswind Assist * Cruise control * Blind Spot Assist Multimedia * Digital radio (DAB) with Bluetooth hands-free system * Instrument cluster with color display Equipment Lines and Packages * Winter package Condition/Documents * COC papers Other * 3.5-ton truck * 6-speed manual transmission ECO Gear * Storage compartment under dashboard * Overhead storage above windscreen * Active Brake Assist * Active Lane Keeping Assist * Acoustic package * Trailer load capacity up to 3,500 kg possible * Tachograph controls front, under roof lining * Front cupholder * Digital operating manual * Third brake light * Wiring for trailer socket * HVO-compatible vehicle * Alternator: 14 V / 250 A * Passenger seatbelt warning system * Driver seatbelt warning system * Semi-automatic TEMPMATIC air conditioning * Wooden floor * Load compartment lining up to roof height (wood) * Intelligent Speed Assistant (ISA) * Coat hook in driver's cab * Communication module (LTE) for digital services * Instrument panel charging package * Steering wheel adjustable in tilt and height * MBUX multimedia system * OM 654 DE 20 LA 110 kW (150 HP) 3800 rpm * Parking package with reversing camera * Premium complete wheel protection (3 years) * Tire pressure monitoring at front and rear axle, wireless * Signs / Printed materials in German * Side marker lights * Driver seat occupancy detection * Seat heating for driver * Smartphone integration package * Jump-start contact point * Black Maturin upholstery * Updates for Intelligent Speed Assistant * First-aid kit * AGM battery 12 V 92 Ah * Front axle with increased load capacity * Preparation for intelligent tachograph EU * Navigation pre-installation * Warning triangle * Wet wiper system * Heat-insulating glass with band filter at windscreen * Registration certificate, Part II * Axle ratio: i = 3.923 * Vehicle without EG speed limiter * Model year 25 Miscellaneous: * Nationwide delivery for €249 net plus VAT (€296.31 including VAT) * For all vans: On request, 12 or 24 months Mercedes-Benz used vehicle warranty available. * We are happy to take back your current vehicle, offset it against your new vehicle, or pay you the purchase price. * Leasing / financing via Mercedes-Benz Bank. We are happy to provide you with an offer. * No liability for printing or typographical errors. * Subject to prior sale and errors excepted. ----

Condition: excellent (used), functionality: fully functional, mileage: 48,011 km, power: 73 kW (99.25 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, first registration: 02/2017, next inspection (TÜV): 04/2027, loading space length: 1,660 mm, loading space width: 1,225 mm, loading space height: 1,160 mm, emission class: euro6, color: white, number of seats: 3, number of previous owners: 1, Equipment: ABS, airbag, all-season tires, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, parking sensors, power assisted steering, sliding door, soot filter, traction control, truck registration, Very clean ex-lease vehicle with high-quality special equipment from first owner, non-smoker vehicle, Peugeot Partner panel van 1.6 Blue HDI 100 L1 Premium Car Play with specialized food hygiene catering conversion in the cargo area, Euro 6, version featuring an insulating, robust, seamless one-piece and fully washable PU coating for easy cleaning, all-round load securing rails, no refrigeration, also ideal for bakers, butchers, hunters, direct marketers, farm shops, etc. Audio system with Bluetooth and touchscreen, rear parking sensors, cruise control, 3-seater with Multiflex dual passenger bench seat, all-season tires, etc. Truck registration Euro 6 3 seats Food catering hygiene conversion, one-piece, without refrigeration 3 load securing rails in the cargo area 6 recessed lashing points in cargo floor Cargo compartment lighting 5-speed manual transmission ABS with EBD Electric exterior mirrors Djdpfjx Dk U Rox Addola Hill start assist Tachometer Third brake light ESP including traction control (ASR) Electric windows Cruise control and speed limiter Tinted windows 180° rear wing doors Height- and reach-adjustable steering wheel Diesel particulate filter Right-hand sliding door Power steering Multiflex dual passenger bench seat Immobilizer Central locking with remote control Rear acoustic parking sensors Audio system with Bluetooth and touchscreen Full-size spare wheel, 100% tread Tyres: 195/65R15 M+S all-season Load compartment dimensions: length 1,660 mm, width 1,225 mm, height 1,160 mm Full service history. Last service carried out in 03/2023 at 39,948 km. Vehicle available immediately. If you have any questions, we are happy to help by phone. The vehicle description serves solely to describe the vehicle and does not constitute any warranty in the legal sense. Accessories information without guarantee; changes, prior sale, and errors excepted! We are a member of the Federal Association of Independent Motor Vehicle Dealers (BVfK) and bear the BVfK quality seal!

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, table width: 850 mm, table load: 5,000 kg, table length: 2,700 mm, overall weight: 15,500 kg, year of last overhaul: 2024, RefurbishmentPLUS by Dornhöfer The difference. Including installation and commissioning! MAIN TECHNICAL DATA Year of manufacture: 2007 Capacities / Travel: Longitudinal (X): 2,500 mm Vertical (Y): 1,250 mm Cross (Z): 1,200 mm Table size: Length: 2,700 mm Width: 850 mm Number of T-slots on the table surface: 6 T-slot width: 22H12 mm Reference slot: 22H8 mm Distance between slots: 140 mm Max. table load: 5 t/m² Paint finish: RAL 5011 (steel blue) and RAL 7035 (light gray) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 form A Main drive: Drive power: 100% duty cycle KW24 Spindle speed range: Spindle speed: 20-4,000 rpm Torque: 479 Nm Feed rates: X, Y, and Z axes mm/min 10-10,000 Max. rapid traverse speed: X, Y, and Z axes mm/min 25,000 Weight: approx. 15,500 kg BASIC MACHINE EQUIPMENT: Heidenhain iTNC 530 HSCI Automatic milling head, diagonal H200 Chip conveyor Coolant system STANDARD EQUIPMENT: - Portable electronic handwheel HR 510 with 3m spiral cable - Hydraulic counterbalance acting directly on the vertical slide - 3D thermal expansion compensation for Heidenhain CNC contouring controls - Complete splash guard enclosure consisting of two front doors and one rear door for operating the machine from the front and rear. All doors are equipped with viewing windows. - Heidenhain AC drive motors in all axes with diagonal drive technology - INA RUE 45 linear guideway system in all axes with central lubrication - Ball screws (IT5) in all axes - Heidenhain direct linear measuring system in all axes - Telescopic covers for the X-axis guideways - Automatic cyclic lubrication for all axes and motion components - Work area lighting Djdpfeun Nnqjx Addjla Refurbishment+ – what does that mean? The RefurbishmentPLUS line offers you a machine that has been uncompromisingly restored to its original technical and visual condition. All assemblies have been completely disassembled, repainted, and rebuilt with new, original spare parts. Cables, hydraulics, guides, spindles, rolling bearings – everything new!

Condition: used, Year of construction: 2023, operating hours: 119 h, functionality: fully functional, Basic Package Inventhor Type 6 Dodjxx Sbnspfx Addsla Load-sensing system 500-liter fuel tank Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally arranged wear strips 24 V electrical control – additional electric pump to operate the following functions when the engine is off: Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional Equipment: 260 kW power train – EV 3-axle drawbar chassis unit Shredding system Size L – 20 teeth Auxiliary hydraulic connections 35–80 l/min Hydrostatic drive Hopper extension 350 mm, watering device both sides 7 m rear conveyor belt Overband magnet – Neodymium Frame for 7 m overband magnet Delivery date to be agreed

Condition: used, Year of construction: 2018, operating hours: 6,031 h, functionality: fully functional, Basic Package SM620 Plus: Central axle trailer chassis with 2 axles, 80 km/h EU road approval Braking system including ABS and lighting according to EU directive 50 mm EU towing eye, incl. mounting shoe Hydraulically adjustable support legs at the front on both sides and rear right Splash protection (inner and side mudguards) Tyres 435/50 R19.5 Permissible total weight 19,000 kg Deutz diesel engine TCD 3.6 L4, 85 kW at 1,800 rpm, compliant with emission standard EUROMOT TIER IV Final Hydraulically reversible fan at water and oil cooler Complete engine unit can be swung out Fuel tank 300 litres Feed hopper 5.0 m³ capacity Stone grid preparation Hydraulically folding side conveyor: belt length 5,500 mm, belt width 1,000 mm Hydraulically folding rear conveyor: belt length 5,500 mm, belt width 1,000 mm Hydraulic support cylinder between side and rear conveyor Emergency stop switches at side and rear conveyors Load-dependent material feed from conveyor floor to screening drum Continuously variable screening drum speed from 0 - 20 rpm Continuously variable hopper belt speed from 0 - 0.17 m/s Control box at the rear of the machine with the following functions: emergency stop switch, folding/retracting the rear conveyor, folding/retracting the side conveyor, side conveyor inclination and load control +/-, automatic mode on/off From the operator panel: fold/unfold side conveyor Hydraulically folding cleaning brush with individual brush segments and spring tines Centrally arranged wear strips 24 V electric control Underrun protection rear Side collision guard front (reinforced version) and rear both sides Djdpfx Adoxx R Rhsdsla Hydraulic quick coupling between rear conveyor and machine Acoustic start-up warning, door monitoring Doppstadt telematics system Paintwork: RAL2011 deep orange Basic version without screening drum Optional equipment: Flow divider on rear conveyor Delivery date by arrangement

Condition: used, Year of construction: 2024, operating hours: 630 h, functionality: fully functional, Basic package AK565 Plus: MTU diesel engine 6R1300, 390 kW at 2,000 rpm, EUROMOT V compliant Central axle trailer chassis with 3 axles, road approval for 80 km/h Braking system incl. EBS and lighting according to EC directive 50 mm EC towing eye incl. slip-on shoe Tires: 435/50 R 19.5 Hydraulically adjustable support leg Dedpfoxx R Aksx Addsla Splash guards (internal and side fenders) Permissible total weight: 22,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, meets EUROMOT V emission standard Exhaust air directed upwards Load-dependent material feed control incl. automatic reversing of the scraper floor Fuel tank: 600 liters Feed roller: length 1,690 mm, diameter 510 mm, with fitted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable "Dopplock" flail tips Standard: "Streusel plus" flail tip Impact plate with teeth Centrally positioned lubrication strips Electric pump for cylinder functions (e.g. raising/lowering support leg and opening/closing rear hood, folding in/out discharge conveyor, releasing drive) when engine is off 24 V electric control system Separate control box at the rear of the machine Hydraulically folding fine shredding basket "Multimesh" (mesh size between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Separate drive for feed roller / scraper floor - "Twin Drive" Rear discharge conveyor with anti-magnetic center piece - belt length 6,000 mm, belt width 1,800 mm, discharge height 4.2 m – height adjustable Underbelt - belt length 1,400 mm, belt width 1,750 mm Extended radio remote control with 2 foot switches Drive system preparation Reinforcement plates for the intake hopper (material: Hardox), both sides for side wall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: Hydraulic drive system Additional hydraulic connection 20 l/min "Bear Paw" flail tips Impact plate with strike bar and tooth row Neodymium magnetic roller incl. chute NEODYM overband magnet for rear discharge conveyor Frame for overband magnet Moistening system LED lighting package: engine compartment and rear discharge conveyor Delivery date by arrangement

Condition: used, Year of construction: 2023, operating hours: 2,798 h, functionality: fully functional, Basic Package AK 640 SA: Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting in accordance with EU regulations Tires: 385/65 R22.5 Gross vehicle weight 32,000 kg Djdsxx Rrropfx Addjla Hydraulically adjustable support legs Splash guards (inner and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, compliant with EUROMOT V emission standard Auxiliary hydraulic connection 20 l/min Load-dependent feed control incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank: 2 x 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: 'Streusel plus' flail tip Impact plate with teeth Centrally arranged wear strips Electric pump for cylinder functions (e.g. lifting/lowering support legs and opening/closing rear basket, folding/unfolding rear conveyor, disengaging drive) when engine is off 24V electrical system Separate switch box at the rear of the machine Hydraulically folding fine shredding basket "Multimesh" (mesh size between 30 - 280 mm, gradations on request), incl. one-piece rear flap Rear discharge conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic center section Lower conveyor: belt length 3,800 mm, belt width 1,400 mm Engine compartment protection plate (material: Hardox) Moistening system for external water connection Scraper floor with 71 slats Wear protection in drum area Reinforcement plates on both sides of the feed hopper (made of wear-resistant steel) Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional Equipment: Hydraulic drive Fine shredding basket Scraper floor chain lubrication Lighting package: engine compartment and rear conveyor LED lighting package (scraper floor and infeed) 'Bear Paw' flail tips Delivery date by arrangement Available from 04/2026

Condition: used, Year of construction: 2023, operating hours: 1,400 h, functionality: fully functional, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally positioned wear strips 24V electric control – additional electric pump for operation of the following functions with the engine switched off: Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Dlsdjxx Rlfjpfx Addea Optional equipment: 260 kW drive train – electric version 400 mm track undercarriage Size L shredding system – 20 teeth Size L limiter Auxiliary hydraulic connections 35 – 80 l/min 7 m rear conveyor Neodymium overbelt magnet Frame for 7 m overbelt magnet Hopper extension 350 mm, water spray unit on both sides Delivery date by arrangement

Condition: used, Year of construction: 2022, operating hours: 3,000 h, functionality: fully functional, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally positioned wear/slide strips 24-V electric control system – additional electric pump enables the following functions with engine off: raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Service-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan wheel Three-sided load protection Folding hopper Dsdoxx N T Ispfx Addjla Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Painting: RAL2011 deep orange Optional equipment: Driveline 310 kW – EV 3-axle drawbar chassis unit Shredding system Size L-C3 600/4-30Z Size L limiter Auxiliary hydraulic connections 35 – 80 l/min Hydrostatic drive Hopper extension 350 mm, left-side watering Rear conveyor 7 m Overband magnet Neodymium Frame for 7 m overband magnet Central lubrication system Custom paint finish in RAL Delivery date to be arranged

Condition: used, Year of construction: 2022, operating hours: 1,150 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system Dlodpfexx N Dgsx Addja - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Delivery date by arrangement