Used Formwork Panels for sale (10,977)

Condition: as good as new (ex-display), Year of construction: 2023, The scope of delivery includes: 01x chipboard/ floor covering for storage platforms, new Manufacturer: UNILIN Division Panels Year of construction: March 2023 (new) Dimensions: approx. 2,600 x 1,020 mm (WxD) Chipboard thickness: approx. 38 mm Design: P4, grooved all round Weight / unit: approx. 65.50 kg Panel size: approx. 2.65 m² Color top side: raw Color underside: white Remark: - The chipboard panels are as good as new. Due to the storage, dust deposits may be present. - The chipboards do not have a spring. These are picked separately. Iederc Di Eopfx Aanetr General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, total length: 2,440 mm, total width: 590 mm, total height: 18 mm, We offer OSB boards here as Grade II (seconds). (The boards are only sold by the package. Individual boards cannot be purchased.) Scope of delivery: - OSB boards, Grade II - Total length: 2,440 mm - Total width: 590 mm Isdpfx Aasxxrn Ujnjtr - Thickness: 18 mm - Board size in m²: approx. 1.44 m² - Total m² per package: approx. 144 m² - Design: Tongue and groove - Quantity per package: 100 pieces - Base price per m²: €7.56 Notes: This is a special lot in Grade II, damage to the OSB boards may be present. Your contacts at our company: Mr. Falk Deutsch Mr. Mario Klöver Mr. Andre Evering General information on the item: This item is only available for collection. Delivery or shipping is subject to additional costs, which can be provided upon request depending on the location and volume of delivery.

Condition: good (used), 20x grating panels, 1m x 1.20m – used – : Price ex location: €995 (net) Ijdpfjx El Rfjx Aanjtr Manufacturer: unknown Model: unknown Year of manufacture: unknown Load capacity: unknown Width: approx. 1m Length: approx. 1.20m Height: approx. 3cm Mesh size: approx. 3 x 3cm Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: new, functionality: fully functional, Year of construction: 2026, XR500 sandwich panel assembly vacuum gripper Maximum lifting capacity 600kg 8 suction cups measuring 16cmx42cm 2 wall suction cups measuring 16cmx42cm Extension – 4 pcs. Battery powered Mounting position; vertical/horizontal Securing belts for roof and wall panels (1 set) Securing belt mounts Roof kit, intermediate 2 x 2 suspensions – without suction cups (1 set) Transport wheels Transport basket Additional options: • remote control • narrow suction cups 8x50 cm Ijdpfsv I Uc Rjx Aanjtr • two vacuum circuits • spare seal • spare batteries • possibility of extending the frame to 8 m

Condition: like new (used), Equipment to be placed after an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° the panels (workpieces) from cross sense (crosswise) to longitudinal sense (lenghtwise) Separate electric and command panel (unique with QZ0170A) 1st Table (cross) with motorized rollers (mm 2200 x 1850 ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (longitudinal) with motorized rollers (mm 1300 x 2900 ca.) Itsdpfxec Ux Tmo Aansr Total installed motor power Kw 4 Total lenght of the machine mm 4800 (ca.)

Condition: excellent (used), For sale are used storage racks manufacturer Metalsistem in very good condition: 11 pieces uprights H = 280cm, D = 168cm, galvanized (68,90 EUR net/pce.) 60 pieces crossbar L = 205cm, shelf load 360kg, galvanized (5,55 EUR net/pce.) 30 pieces metal panels, galvanized (17,78 EUR net/pce.) Additional stands, trusses and metal panels can be purchased. Several packages available. We can cut the stands for you free of charge. Itsdpfx Aaeizi Scener Shipping on request. You can also pick up the racks directly in our warehouse, we have more than 15.000 tons of different racks permanently in stock (German-Polish border town Guben-Gubin).

Condition: good (used), For pallet racks with 800 mm frame depth Size: 530x800 mm Load capacity: 140 kg / panel If you need shelves or accessories in other compositions or designs, please contact us. We offer a comprehensive range of new and used shelving units and accessories and accessories and are happy to assist you with your planning. Further accessories like for example: Frame, corner and collision protection, push-through protection, chipboard, grids, rear wall grids, depth bars available. Shipping: Please enquire about freight costs, stating your postcode and location, as well as the desired item quantity. Further service offers: Planning, shelf assembly/disassembly, purchase/sale. Changes and errors in the technical data, information and prices and subject to prior sale! Itedpfx Aasgz H R Ionsr

Condition: new, total length: 2,440 mm, total width: 590 mm, total height: 12 mm, We offer you OSB boards as Grade II selection. (The boards are only sold in packages. Individual boards cannot be purchased.) Scope of delivery includes: - OSB boards, Grade II - Article number: OSB10 - Total length: 2,440 mm - Total width: 590 mm - Thickness: 12 mm - Board size in m²: approx. 1.44 m² - Total m² per package: approx. 216 m² - Design: with tongue and groove - Quantity per package: 150 pieces - Base price per m²: €5.04 Note: This is a special lot of Grade II boards; the OSB boards may show damages. Itjdpfx Aasxxrhnoner Your contacts in our company: Mr. Falk Deutsch Mr. Mario Klöver Mr. Andre Evering General information about this item: This item is available for collection only. If transport or shipping of this item is required, it will incur additional costs, which can be requested from us individually depending on the place of delivery and the required quantity.

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Iedpfevvkipox Aanotr

Condition: new, functionality: fully functional, Year of construction: 2026, BEFARD XPR500 glass and sandwich panel vacuum suction cup Itodpsv I Tcvsfx Aanor Maximum load capacity 500 kg 1 pc. suction plate 800x400 Remote contro l Single-circuit vacuum system Battery power supply Hook mounting bracket Transport trolley with wheels adapted for transport on stairs A choice of colors.

Condition: like new (used), Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° the panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Itedoc Ux Tlopfx Aansr Separate electric and command panel 1st Table (longitudinal) with motorized rollers (mm 1300 x 2900 ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers (mm 2200 x 2550 ca.) Total installed motor power Kw 4 Total lenght of the machine mm 5500

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total length: 9,100 mm, total height: 2,900 mm, total width: 4,600 mm, product height (min.): 20 mm, product length (max.): 6,200 mm, product width (max.): 2,600 mm, overall weight: 40,500 kg, Double production solar panel laminating machine The laminator is used for manufacturing solar modules or composite materials. Multiple layers of materials are bonded together and fed into the laminator. The materials are laminated under the influence of pressure and temperature. The lamination process is conducted under vacuum to prevent unwanted entrapped gases in the final product. Finally, the finished laminate is conveyed out of the laminator. The machine comes with many spare parts and can be seen in operation. Iedpfsxzrvkex Aanotr

Condition: good (used), Here we offer a handling device from ZASCHESitec. This device was used in the production of instrument panels. Iodscipw Uepfx Aanetr It consists of the following components: KBK - FPM 10 - 7,0 x 5,0 carriage - LWK 762 x 762 Load lifting module - Z-L6 - 80/1280 - 1486 Load lifting device - GP10 Load capacity: 10 KG Scope of delivery: (ZASCHESitec handling device, technical documentation) Condition: used / used Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: new, total length: 2,500 mm, total width: 625 mm, total height: 22 mm, We offer OSB boards as grade II (second choice) in this listing. (Sales are package-only. Single boards cannot be purchased.) Scope of delivery: - OSB boards, grade II - Total length: 2,500 mm - Total width: 625 mm - Thickness: 22 mm - Board size in m²: approx. 1.56 m² Iedpfx Aajxxrv Eonotr - Total m² per package: approx. 50 m² - Version: Tongue and groove - Quantity per package: 32 pieces - Base price per m²: €9.24 Note: This is a special lot of grade II boards, which may contain damaged OSB panels. Your contacts at our company: Mr. Falk Deutsch Mr. Mario Klöver Mr. Andre Evering General information about the item: This item is only offered for collection. If transport or shipping is required, additional costs will apply, which can be requested individually based on the delivery location and quantity.

Condition: good (used), Year of construction: 1996, Offer 25468 Sheet – Profiling Line for Shelf Panels Ijdpfoxxvq Tsx Aanstr Technical Data: - Shelf panel width approx. 250 mm - Material thickness 1.25 mm - Profiling unit with 16 roll forming stations - Hydraulic punching unit - Straightening unit, make DREHER - Motorized decoiler CAMU, load capacity approx. 1.5 t - Control panel - Space requirement / footprint: 14 x 1.5 m - Weight approx. 10 t

Year of construction: 2008, condition: excellent (used), I sell the press for glulam glued massive wood LISY DVORAK TH6, year 2008. Material size 3000 X 1250 x 50mm 6 working areas, manual rotation. 6 pcs hydraulic cross pressures per 1 area / pomp 1,1 KW 6 pcs manual pressures per 1 area Isdpfx Aekd Drhoanjtr Self weight 1200kg. Glue spreading machine LISY DVORAK NL200 included in price. Very good condition. Available immediately.

Condition: excellent (used), TURNING DEVICE FOR PANELS (LONGITUDINAL TO CROSS) Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Built-in electric and command panel Total length mm 6200 Itsdsd Siydepfx Aanjr 1st Table (longitudinal) with motorized rollers mm 1300 x 3200 (ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers mm 2500 x 3000 (ca.) Min dimensions of the panels mm 195 x 250 Max dimensions of the panels mm 1200 x 2500 Min/Max panels thickness mm 12 - 40 Total installed motor power Kw 3

Condition: good (used), The scope of delivery includes: 6x steel panels, used Manufacturer: SSI Schäfer Total depth: approx. 960 mm Inner depth: approx. 955 mm for stud depth: 950 mm Total width: approx. 300 mm Material thickness: approx. 2.50 mm Material color: Sendzimir galvanized Frame profile: approx. 300 x 40 x 20 mm Weight per piece: approx. 7.940 kg Your contact persons: Mr. Andre Evening Iodpfjv R T Epox Aanotr Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Year of construction: 2009, condition: excellent (used), I sell the press for glulam glued massive wood DRESOMET 4N, year 2009. Itsdpfxonxpabs Aanor Material size 2800 X 800 x 60mm 4 working areas, manual rotation. 9 pcs pneumatic cross pressures per 1 area 9 pcs pneumatic pressures per 1 area Self weight 1300kg. Very good condition. Available immediately.

Condition: excellent (used), PANELS RETURN SYSTEM for EDGE BANDER (Right) To combine with a single-side Edge Bander allowing the operator (worker) to always stay at the in-feed side of the machine (the processed workpiece will automatically return-back to him). Isdpjff R Tqsfx Aanotr Blowing Air Table, infeed and outfeed (total dimensions mm 3520 x 2560) 180° transfer (mm 3120 x 2140) with motorized roller conveyors and motorized belts Motorized carpet (mm 9080 x 1560) Panel Dimensions (MIN/MAX): Length - 240 mm / 2800 mm Width - 120 mm / 1300 mm Thickness - 8 mm / 60 mm opt. up to 100 mm

Condition: excellent (used), The scope of delivery includes: 1x steel panel, used Material color: Sendzimir galvanized Total width: approx. 750 mm Total depth: approx. 1,150 mm Clear width: approx. 920 mm Crossbeam support: approx. 58 mm Material thickness: approx. 2.00 mm Weight per piece: approx. 15.00 kg Note: - The steel panels have a frame for the crossbeams on one side. (Height: approx. 25 mm) - The other side is continuous and, with an approx. 22 mm high upstand, serves as a push-through protection! The following quantities are required for the following truss lengths: 2,250 mm – 3 pieces 3,000 mm – 4 pieces 3,750 mm – 5 pieces Your contact person in our company: Itsdpfxshzhrgs Aanjr Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Year of construction: 2008, condition: excellent (used), I sell the press for glulam glued massive wood LISY DVORAK TH6, year 2008. Material size 2600 X 1050 x 50mm 6 working areas, manual rotation. 6 pcs hydraulic cross pressures per 1 area / pomp 1,1 KW 6 pcs manual pressures per 1 area Self weight 1350kg. Very good condition. Available immediately. Itsdpfeh Txl Ijx Aansr

Condition: excellent (used), PANELS RETURN SYSTEM for EDGE BANDER (LEFT SIDE) To combine with a single-side Edge Bander allowing the operator (worker) to always stay at the in-feed side of the machine (the processed workpiece will automatically return-back to him). Itsdpfx Aegz Atbeanjr Roller translator table with belts - 180°: 2600 mm x 1800 mm 1° Conveyor (motorized carpet) (mm) 7000 x 900 2° Conveyor (motorized carpet) (mm) 2500 x 850 Mod. BOOMERANG BONSAI

Condition: good (used), The scope of delivery includes: 08x steel panel with support angle, used Manufacturer: SSI Schaefer material color: hot-dip galvanized total depth: approx. 960 mm for frame depth: approx. 950 mm total width: approx. 300 mm total height: approx. 50/40 mm contact surface: approx. 16 mm Itsdpfx Aoppt N Seanor weight | pcs.: approx. 7,650 kg 01x steel panel end termination, used Manufacturer: SSI Schäfer material color: hot-dip galvanized total depth: approx. 960 mm for frame depth: approx. 950 mm total width: approx. 300 mm total height: approx. 50/40 mm weight | pcs.: approx. 7,830 kg Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: excellent (used), To automatically turn up-side-down (180°) the workpieces (stack of panels) Iedpfx Aaegvpn Ionetr Entry and exit of the panels in the longitudinal direction Manages one stack of panels per time Min/Max thickness of the stack mm 1000 / 1600 Working width (min/max) mm 300 / 1300 Useful working length (min/max) mm 500 (min) / 3000 Separate electric and command panel Total installed motor power Kw 4,3