Used Altendorf Tkr 45 for sale (125)

Condition: good (used), Altendorf tkr 45 panel saw, Sliding table 140 cm, Caodpfxew Rnvyj Addja Main motor 5.5 kW, Max. blade diameter 400 mm, Blade tilt and height hydraulically adjustable, Cutting width to the right 85 cm, Machine in good condition.

Year of construction: 1991, condition: used, Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, panel saw -Manufacturer: Altendorf, sliding table saw type TKR 45 Cedpemydmbjfx Addjaa -Main motor: Bauknecht 5.5 kW with brake -Scorer motor: Emod 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -Max. Cutting height: 90° 95 mm / 45° 70 mm -Miter cut: up to 45° -Cutting width: 2250 mm -Table length: 1400 mm -Dimension total 3480/1530/H1370mm -Weight: 1104 kg

Condition: good (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 85-10-116, Equipment: scorer, Machine no: 85-10-116, Type: TKR 45 Table: 1400X400mm Vorrizer, Cjdswkha Topfx Addjaa

Condition: used, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,000 mm, cutting width at rip fence: 1,000 mm, saw blade diameter: 450 mm, main saw diameter: 450 mm, pivoting range: 45 °, power: 5.5 kW (7.48 HP), Equipment: motor brake, Machine is ready for operation, can be connected to power, function-tested, without scoring unit. Machine can be inspected on site. Csdpfx Adext Rg Eedsaa

Condition: good (used), Year of construction: 2003, functionality: fully functional, Length of sliding table: 3,000 mm Cutting width at rip fence: 1,000 mm Cutting height with blade diameter 450 mm: 75 - 150 mm Cutting height with blade diameter 350 mm: max. 100 mm (each at 90-degree blade position) Double carriage on steel round guides, no Pertinax Reinforced main saw motor: 7.5 kW Maximum saw blade diameter: 450 mm Height adjustment of the saw unit via dimension input on the control panel Motorized tilt adjustment of the saw unit via dimension input on the control panel Supplied with newly installed 350 mm saw blade 2-axis scoring saw unit, can be set in the control system to desired height and alignment relative to the main saw blade Cjdpfxex Dax Es Addoaa Scoring unit automatically lowers below table level when not in use Adjustment of the scorer can be done while the machine is running RAPIDO scoring saw blade – simplifies scoring width adjustment, set up in max. 3 minutes Adjustment range: 2.8 – 3.8 mm Additional accessories: - Mitre fence extendable to 3,200 mm, with 2 foldable stops - LASER cutting line indicator, e.g. for trimming cuts on solid wood planks

Condition: new, Year of construction: 2022, Sawblade tiltable 46 ° Length of the rolling table 3000 mm cutting width 1300 mm Motor output 5,5 kW Cutting height 150 mm Saw blade diameter 450 mm Speed stufenlos U/min. Cedpfex Avq Uex Addsaa weight of the machine ca. 1300 kg

Condition: excellent (used), Year of construction: 1986, Used, good condition Make: Altendorf Type F45 Year of manufacture: 1986 Machine No. 86-4-143 GS-tested Motor: 5.5 kW Carriage length: approx. 2500 mm Cutting width: approx. 800 mm Pivotable up to 45° Saw blade diameter: 450 mm Cjdpfx Aewhgd Sjddsaa Parallelogram guard Miter stop Extraction connection: D 80 and 120 mm Space required: approx. 2500 mm x 1600 mm x 1500 mm Weight: approx. 1000 kg Storage location: 54634 Bitburg, Germany, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: good (used), Panel saw Altendorf F45 in good overall condition Caedjx Alcaepfx Addja Year of manufacture: approx. 1990 Sliding table 2800 mm Motor 5.5 kW Documentation available

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,250 mm, cutting width at rip fence: 1,250 mm, cutting height (max.): 80 mm, cutting height with scoring (max.): 80 mm, saw blade diameter: 300 mm, table length: 3,200 mm, height adjustment type: hydraulic, type of input current: three-phase, input voltage: 400 V, Equipment: saw blade guard, Year of manufacture: 1991, in very good condition and free of play First owner Almost exclusively used for processing panel material Cedsx Dkvzepfx Addoaa Sliding table 320 cm 45° hydraulically tiltable Scoring unit All stops, protective covers, and required accessories included

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1999 Equipment and technical data: - Cutting length: 2,600 mm - Cutting width: 1,000 mm - Cutting height vertical: 0–75 mm - Cutting height at 45°: 0–53 mm - Length stop by scale at angle fence, extendable up to 3,250 mm - Anodised version - Swivelling up to 45° - Digital display of swivelling angle - Motor: 5.5 kW Caodjxvnmuepfx Addja - Speed: 4,200 rpm - Saw spindle: 30 mm - Saw blade diameter: 300 mm - Table extension: 840 mm - With DUPLEX double mitre fence Dimensions: 2,600 x 1,700 x 1,300 mm Weight: approx. 880 kg Availability: short notice Location: Flörsheim

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Werksüberarbeitungsnummer: WÜA20111490519800, cutting length (max.): 3,000 mm, cutting width at rip fence: 1,000 mm, saw blade diameter: 450 mm, table length: 840 mm, power: 5 kW (6.80 HP), Equipment: rotational speed infinitely variable, Used machine GM010.0348 Year of manufacture: 2020 F45 ElmoDrive Machine height: 910 mm Control at eye level Document holder directly at the control panel Double-sided tilting (+/- 46°) Max. blade diameter: 450 mm Motor: 5.0 kW (6.8 HP) VARIO Prepared for 2-axis scoring unit Table extension: 840 mm Double roller carriage with carriage length 3000 mm On/Off switch on double roller carriage PQS centrally positioned Codpfxjw Intye Addsaa Parallel fence DIGIT X 1000 mm Front support roller

Condition: excellent (used), Year of construction: 2024, Sawblade tiltable 46 ° Length of the rolling table 3000 mm cutting width 13000 mm Motor output 7,5 kW Cutting height 204 mm Codpfjx Ak Hwex Addjaa Saw blade diameter 550 mm Speed 3000/4000/5000 U/min. weight of the machine ca. 1250 kg

Condition: excellent (used), Year of construction: 2011, Altendorf Panel Saw F 45 Casdpsxiv Dhsfx Addoa Double roller carriage with carriage length 3000 mm Cutting width: 1300 mm with Digit X Drive power: 5.5 kW Saw blade diameter: 500 mm 2-axis scoring unit Table extension: 840 mm Angle-mitre fence Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1993, functionality: fully functional, Panel saw Manufacturer: Altendorf Model: F 45 Year of manufacture: 1993 With 2800 mm sliding table Motor: 5.5 kW Cedpfx Aexwypqsddeaa Max. blade diameter: 350 mm Scoring motor: 0.75 kW With width extension With length extension

Condition: good (used), Year of construction: 1988, Panel saw Manufacturer: Altendorf Model: F45 Year of manufacture: 1988 Sliding table length: 320 cm Cutting width: 100 cm Cutting height: approx. 153 mm Max. saw blade diameter: 450 mm Power: 5.5 kW Speeds: 3 / 4 / 5 / 6,000 rpm Scoring unit: No Motor brake: No Caodpjxvyamefx Addea

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Equipment and technical specifications: - Cutting length: 2800 mm - Cutting width: 1250 mm Csdsxuxg Njpfx Addoaa - Saw blade swivel range: 0° - 45° - Max. saw blade diameter: 350 mm - Saw blade speeds: 3000 / 4000 / 5000 / 6000 rpm - with scoring saw unit - with parallelogram guard - with extraction port 80 mm - with table extension 800 mm - Motor 5.5 kW - with brake motor Weight approx. 850 kg Availability: approx. end of January 2026 Location: Hesse

Condition: reconditioned (used), Year of construction: 2020, machine/vehicle number: Werksüberarbeitungsnummer: WÜA20111490716308, cutting length (max.): 3,800 mm, cutting width (max.): 1,300 mm, saw blade diameter: 500 mm, table length: 1,200 mm, power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, Template holder TPL 1,200 mm reinforced On/off switch at DRW Caedpewqfxtsfx Addea WGA Digit - L Extendable cross slide extension PA 1,300 mm - CNC Front support roller Laser - kerf indicators

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,300 mm, main saw diameter: 450 mm, power: 5.5 kW (7.48 HP), Equipment: motor brake, scorer, Machine available from October 2025 - TOP condition - Digital display for motorised height adjustment - Digital display for motorised tilt adjustment 90° - 45° - Sliding table length 3200 mm - Scorer with 2-axis motorised adjustment Cajdpfx Ajw Rc H Hsddea - Digital display for cutting width at parallel fence 1300 mm, motorised adjustment - Motor power 5.5 kW (7.5 HP) Vario - Digital display for stepless speed adjustment 2800 - 6000 rpm - Digital display for angle stop; crosscuts up to 3800 mm - Table extension 800 mm

Condition: used, Year of construction: 1987, machine/vehicle number: 87-1-216, cutting length (max.): 3,200 mm, cutting width (max.): 1,250 mm, cutting width at rip fence: 1,250 mm, cutting height (max.): 155 mm, saw blade diameter: 450 mm, overall weight: 1,000 kg, pivoting range: 45 °, power: 5.5 kW (7.48 HP), Used Altendorf panel saw type F 45, sliding table 3,200 mm, cutting width at parallel fence 1,250 mm, max. saw blade D = 450 mm, max. cutting height approx. 150 mm, motor 5.5 kW, 4 speeds 3,000/4,000/5,000/6,000 rpm, parallelogram guard hood, hydraulic height and tilt adjustment 0 - 45°, manual angle display, double-sided mitre fence "Duplex" extraction connection D = 120 and 80 mm, located in Seevetal, as inspected, Cajdsxu D R Hjpfx Addja without freight and packaging, interim sale reserved,

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, cutting width (max.): 1,300 mm, saw blade diameter: 500 mm, Equipment: scorer, TECHNICAL DETAILS Double roller carriage length: 3,000 mm Cutting width: 1,300 mm Drive power: 5.5 kW Csdpfx Adjxnx Hcodeaa Saw blade diameter: 500 mm Table extension: 840 mm EQUIPMENT 2-axis scoring unit Mitre/fence angle stop

Condition: new, Year of construction: 2025, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,000 mm, cutting height (max.): 150 mm, table length: 3,200 mm, Basic Configuration - Electrically powered height and tilt adjustment 0-46° for the main saw blade with automatic correction of the cutting height when tilting the saw unit - Control panel at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manual adjustment via measuring scale, including manual fine adjustment, cutting width 1,000 mm - Angle fence with fixed 90° position, manually adjustable via measuring scale up to 3,200 mm - Max. saw blade projection 154 mm, max. saw blade diameter 450 mm - Drive power 5.5 kW (7.5 HP) with three speeds (3,000/4,000/5,000 rpm) - AKE tool clamping system for the main saw blade - Working height 91 cm Csdpfxoxuqulo Addsaa Control System - Electrically powered height and tilt adjustment, also on both sides (+/- 46°)*, for the main saw blade with automatic height correction and digital displays - Electrically powered adjustment of the parallel fence* - Electrically powered adjustment of the CNC miter fence UNO 90* - Automatic size correction on the parallel fence and angle fence when tilting the saw unit - Digital speed display or stepless speed control (VARIO)* - Electrically powered adjustment of the scoring unit, two or three axes* - Stepless fine adjustment of the axes via +/- buttons - Control of vacuum clamping in the double roller carriage* - Easy axis calibration - Machine diagnostics - Operating hours counter - USB interface - Recall of the last dimension entered (back function) - 99 storable cutting programs - Grooving: with automatic stepwise positioning of the parallel fence until the groove is complete - Automatic conversion from peak to blunt measurement on the parallel fence and angle fence, taking material thickness and tilt angle into account - Compound angle cut function with automatic calculation of missing angles or dimensions - Advanced tool management · Storage of the scorer position (3-axis scorer)* · Saving of main blade thickness and cutting width · Saving of main tool speed · Max. 100 storable tools - Additional functions · Grooving: with automatic stepwise positioning of the parallel fence until the groove is complete · Chain dimension function: cutting sequences with identical distances on the parallel fence, calculated on both sides of the saw blade · Angle cut: by trimming the oversize, the desired finished size is produced after entering the edge angle · 999 storable cutting programs *optional accessories The following options are included: - Pattern holder - Extended cutting height incl. tilting - Motor 5.5 kW (7.5 HP) VARIO - 2-axis scorer unit - LED lighting - Double roller carriage with a length of 3,200 mm - On/Off switch on double roller carriage - Digital miter fence Digit L - CNC parallel fence 1,300 mm - Front support roller - Duplex 1350

Condition: used, Year of construction: 1996, Used machine Year of manufacture: 1996 Features and technical data: Cutting length: 2800 mm Cutting width: 1300 mm Panel cut size: 2800 x 2800 mm Vertical cutting height: 0-75 mm Cutting height at 45°: 0-53 mm Cross cutting with scale on angle stop: 2800 mm Motor: 4 kW Speed: 4200 rpm Cajdpexrhh Rjfx Addja Saw arbor: 30 mm Saw blade diameter: 300 mm Table extension: 540 mm Anodised version Tiltable up to 45° Digital display for tilt angle Scoring saw preparation Mitre fence Weight: approx. 880 kg Availability: short-term Location: Flörsheim

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Werksüberarbeitungsnummer: WÜA20101490328170, cutting length (max.): 3,800 mm, cutting width at rip fence: 1,300 mm, saw blade diameter: 450 mm, table length: 840 mm, power: 6.5 kW (8.84 HP), Equipment: scorer, Used machine GM010.0256 Year of manufacture: 2020 F45 ElmoDrive Machine height: 910 mm Eye-level control panel Dual-sided tilting ( + /- 46°) Cajdpfx Asw Imvmjddea Maximum blade diameter: 450 mm 6.5 kW (8.8 HP) motor 3-axis scoring unit with dual-sided tilt Table extension: 840 mm Double roller carriage, carriage length 3800 mm On/Off switch on double roller carriage Angle and miter stop CNC parallel fence: 1300 mm Laser cut line indicator Spraying device

Condition: new, Year of construction: 2025, functionality: fully functional, cutting length (max.): 3,105 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height with scoring (max.): 150 mm, saw blade diameter: 450 mm, height adjustment type: electric, table height: 910 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 5,000 rpm, type of input current: three-phase, input voltage: 400 V, warranty duration: 12 months, power: 7.5 kW (10.20 HP), Altendorf F45 Pro Drive The machine is new and configured as follows: Working height: 910 mm Sliding table length: 3200 mm Control panel at eye level for comfortable operation Cutting height: 150 mm with a 450 mm saw blade Main motor: 7.5 kW with three rotation speeds; features the AKE saw blade changing system 2-axis scoring unit with a safety LED light in the scoring area, enhancing operator awareness when the scoring unit is active Main motor and scoring unit ON/OFF buttons on the sliding table for convenient machine startup Mitre crosscut fence, extendable to 3500 mm, with angle correction Caedpfjxaudhjx Addja Cutting width: 1300 mm with CNC, programmable via the screen Gobjxaudhskr A Tq Djkc Motorized rise, fall, and tilt adjustment (0–46°) for the main saw blade, with automatic cutting height correction when the blade is tilted The Altendorf F45 has long been recognized as the flagship of sliding table saws, consistently setting the highest quality standards for this type of machine.

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Werksüberarbeitungsnummer: WÜA20101490211358, cutting length (max.): 3,400 mm, cutting width at rip fence: 1,300 mm, saw blade diameter: 450 mm, table length: 840 mm, power: 6.5 kW (8.84 HP), Used machine GM010.0217 Year of manufacture: 2020 F45 ElmoDrive Machine height: 910 mm Eye-level operation Dual-sided tilting (+ / - 46°) Max. blade diameter: 450 mm 6.5 kW (8.8 HP) motor Table extension: 840 mm Double roller carriage with 3400 mm carriage length Miter angle stop CNC parallel fence 1300 mm Front support roller STEG, second support on the double roller carriage Cajdpfx Adew Imrbsdja