Wire electrode, aluminum welding wire, aluminum welding wire, aluminum-magnesium alloy welding rod
Qkze7f9rx
-different producers:
-9x Elisental 1.2 mm SG-AlMg5
-1x MTC 1.0 mm AlMg5
-6x ALCAN 1.2 mm S-ALmg 5
-1x Thyssen 1.2 mm AlMg4.5Mn
-Weight: 7 kg/roll
Price: per piece
Welding rectifier, electrode welding device, electrode welding machine
Qlhjj82zf
-Electrode welding rectifier type: IDEALARC DC-400
-Welding power: max. 400 A
-Wire feeder type: LN-23P
-Recommended wire sizes: 068 "inches 072" inches 5/64" inches (max. 2.0 mm)
-for: self-protecting flux-cored wire
-with 16 rolls of cored wire manufacturer Lincoln type: NR-203 Ni 1% Ø 2 mm
-Ground cable
-Dimensions: 1350/900/H1250 mm
-Weight: 430 kg
We offer
7 x welding machine Variomatic 40 with Eurotrac SLV-2 teiw. remote control in need of repair
The welding machines are no longer used and therefore not repaired and therefore sold.
Single sale for 475 € possible
manufacturer. Messer Griesheim
Type / Model: Variomatic 40
DB 100%: 380V, I2 300A, U2 29V, S1 11,6kVA
DB 60 %: 380V, I2 350A, U2 32V, S1 15,1kVA
DB 35 %: 380 V, I2 400A, U2 34V, S1 19.7 kVA
Feed: Messer Griesheim: EUROTRAC SLV-2
Cooling: Water
Feed speed: 1-18 m/min
Cihbgag0
weig...
diameter 1.2 mm
non-copper-plated wire electrode for welding with shielding
gas in all positions
suitable for single-layer or multi-layer welding of
unalloyed and low-alloy steels
shielding gas Ar, CO2 / Ar, CO2, O2 / CO2^
weight 18 kg / roll
Bnscmzdtlt
*price per roll!*
Because of the many questions:
- Yes, machines are in Germany
- yes, there the knives above and below
- there are now only 18 pieces in stock
- suitable for cables 1-45mm diameter
Stripping machine / peeling machine for cables with a powerful 2.2 kW motor and a net weight of 115 kg.
Sujbhg
Shipping by forwarding agency possible throughout Europe
We offer
9 x welding machine MIG MAG 7x Variomatic 40 &. 3x Eurotrans 50 all with SLV 2....
Lack: The welders were used for large welding power. When they were no longer needed, they were discarded and are now standing for a long time. Therefore the coolant pumps are fixed or the pressure sensor is defective.
The welding units are no longer used and therefore not repaired.
The machines are still in the factory. Self collection
7 x welding machine Variomatic 40 with Eurotrac SLV-2 hose package pa...
For further information please contact the seller.
Ytcu70
For further information please contact the seller.
Exvo70z7
Surplus stock of welding wires, electrodes and powder
Original packed and sorted
Total gross weight 57160 kg
Total netto weight 53840 kg
Bg8zrzcz79
Ca 3358 items
Nettoprice EUR 550,= per tons netto weight
List available on request
Module converter, electronic module
-Wire type: DSV 5421-10/220
-Module: 220 V/4 KVA/10 A
-with: controller BELIMO SGS
-Dimensions: 275/275/H225 mm
Bg0wntxmf9
-Weight: 9.7 kg
table length 590 mm
table width 590 mm
table load 200 Kg
table turning speeds 0,23 - 2,3 U/min
table height 650 mm
total power requirement 0,55 kW
weight of the machine ca. 600 Kg
Benypo8w7c
Ultrasonic and electrolyte cleaning,
wire cleaning line, wire cleaning plant, wire treatment plant
Manufacturer: Sirio-Wire
Type: M0209
Number of wires / cores: 12 (6+6)
Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying.
Year of construction: 2006
The plant was only in operation for about three years, then the production was moved to another location.
Process: Ultrasonic and electolytic cleaning in a hot bath.
Vtp7q3...
WELDING PROFILES PVC URBAN 310 SR
Srv07o
Manufacturer: URBAN
Equipment Type: WELDING PROFILES PVC
Model 310 SR
Year: 1992
net price
full invoice
Description
WELDING MACHINE FOR PVC PROFILES OF URBAN VERY GOOD CONDITION
CNC plasma and flame cutting machine
Air Liquide Welding (Lincoln Electric)
Oerlikon
Oxytome B40 E RS
Year of construction: 2008
Oxyfuel: 2x MACH-HP propane machine torches (15-150mm)
Plasma: 2x Hypertherm HPR260 with THC
Length complete: 32.000mm
width : 5.895mm
height: 2.400mm
cutting length: 28.000mm
cutting width: 2.500mm
CNC: Burny / AMC 10
Filter system: Kemper
Ink Jet Printer: Hitachi IJ Printer / Model PXR-D
Dwsvzq
Commissioning on request
Module converter, electronic module
Yscxb0
-Wire type: DSV 5421-10/220
-Module: 220 V/4 KVA/10 A
-Dimensions: 275/275/H225 mm
-Weight: 8.1 kg
table diameter 400 mm
table load waagerecht 200 Kg
table load senkrecht 100 Kg
table turning speeds 0,2- 2 U/min
voltage 230 V / 50 Hz
total power requirement 0,55 kW
weight of the machine ca. 65 KG
dimensions of the machine ca. 0,65 x 0,5 x 1,0 m
Benyqcbcfe
unused stock machine
manual tilt adjustment
Start-Stop by foot switch
with CE
Design: at the down part prismatic passges, it can do twin 2 pcs
N7ybd
Size: 5000x1600x370 mm
Price of one 3900 EUR
Complete automatic system for the production of conical buckets, Hobbocks, 10/15/20/25 l
Diameter bucket top 285 mm
Noyit
Diameter bucket bottom 272 mm
Production capacity approx. 50 pieces/min
The plant has been completely overhauled, is in a very good operational condition and is still in production!!!
If necessary, a complete assembly and commissioning can be offered to the buyer!!!
ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs
cost of delivery
cover customer
Startup type
R9uzikcv7
negotiated
Description
Notes
Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of m...
table diameter 450 mm
table load waagerecht 300 Kg
table load senkrecht 150 Kg
table turning speeds 0,2- 2 U/min
voltage 230 V / 50 Hz
total power requirement 0,55 kW
weight of the machine ca. 80 KG
dimensions of the machine ca. 0,65 x 0,5 x 1,0 m
Btr9hlva
unused stock machine
manual tilt adjustment
Start-Stop by foot switch
with CE
weight max. 10 t
workpiece diameter 150 - 2300 mm
Turning speed 70 - 1200 mm/min
roll diameter 300 mm
Wheel width 100/150 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. 1,8 x 1,5 x 1,0 m
unused vessel turning unit,
with rubberised rolls, manual adjustable roller-spacing,
one device with twin drive with adjustable rotational speed.
Benypyp3rd
Capacity Driver 150 tons, Idler 150 tons = 300 tons total
Work piece diameter Minimum 1000 mm - maximum 8000 mm
Tyre width 203 mm
Input 400 / 3 /50
Fitted with Mechanical anti - creep facility
Features Rotation speed 75 - 1500 mm per minute
Ufbozsu
Length Driver 4200 mm, Idler 4000 mm
Width Driver 1550 mm, Idler 1050 mm
Height Driver 1414 mm, Idler 1414 mm
Nett weight approx. 17000kgs
Remote control with frequence
Foot switch control with frequence
K3fynshj
Load capacity per section:1500Kg
Vessel range Minimum: 200Ø
Vessel range Maximum: 1500Ø
Variable rotation: 80 - 950 Rpm
No of wheels per section:2
Wheel dimensions: 200 x 100 mm
Length: 1.010 mm
Width: 350 mm
Height: 457 mm
Weight: 200 kg
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It ...
Earth cable for inert gas device, electrode device
-different lengths
-Dinse connector
-Price per meter: 4 EUR/meter
-Number: several cables available
Dxuooy
-Price: per meter
Agie Wire Control DWC-05 M 665.424 , second-hand, slight signs of wear, 100% functional
Fri90wl2
Technical DataPayload: 0/5 KgArm reach: 1.44 mmNumber of Axis: 6Repeatability: 0.05 mmRobot weight: 225 KgMounting: FloorTechnical Data:
• Payload: 5Kg.
• Arm reach: 1440 mm.
• Repeatability:± 0.05 mm.
• Controller: IRC5 M2004
Axis motion speed:
• Axis 1: 110º/s
• Axis 2: 110º/s
• Axis 3: 110º/s
• Axis 4: 280º/s
• Axis 5: 280º/s
• Axis 6: 280º/s
Applications
Stud Welding
Handling of parts
Parts Loading and unloading
...
TIG welding machine L-TEC type inverter TIG 200 DC
Fabr. No. 184548 built around 1994
Capacity 200 amp. = 60% ED
155 amp. = 100% ED
Cdjbdiby
Infinitely variable adjustment range
Type of current DC (direct current)
Power supply 400 Volt, 50 Hz, 32 amp. Plug
-4 m torch Central connector with hand torch
-with Fernpoti (foot switch)
-Gas pressure reducing valve
-only DC
HF ignition
Dimensions L x W x H 850 x 480 x 740 mm
Weight 150 kg
good condition
workpiece length 2200 mm
current capacity -- kVA
welding speed m/min
tube diameter max. 1000 mm
Bjbehhz0qp
tube diameter min. 150 mm
weight of the machine ca. 0,6 t
dimensions of the machine ca. 4,0 x 1,6 x 2,5 m
Without power source
Table Ø: 1.000mm
Table load on 200 mm:600kg
Table load on 400 mm:400kg
Table load on 600 mm:280kg
Bsls2wtmpd
Table load on 1000 mm:200kg
Rotation table: 360.000°
Length: 1.200 mm
Width: 1.200 mm
Height: 1.400 mm
Weight: 1.200 kg
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not fo...
Submerged arc welding device, welding accessories, forming gas welding device, longitudinal carriage, chassis, welding carriage, longitudinal carriage, automatic welding machine, welding carriage, inert gas welding device, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding device, rail runner
-Submerged arc welding machine for: Plating applications (corrosion protection)
-Submerged arc welding machine without: power source
-Submerged arc welding machi...
CHARMILLES ROBOFIL 2050TW - 2008 Wire cutting EDM machine
Working with oil dielectric!!
Nx7d2
Excellent condition. From Swiss watch maker.
max. current output: 30 KVA
power output 50%: 15 KVA
outreach: 600
Ccuhequc
Pressure capacity: 600 kP 6 bar
water pressure: 200 kP 2 bar
weight approx.: 200
Dimension (LxWxH): 1500 x 500 x 1500
Nominal power: 15 at 50% otherwise 30
Welding capacity: 30
Short circuit current, secondary: 15
Spot welding machine TECNA very good maintained condition
table length 560 mm
table width 445 mm
x-axis 300 mm
Drccak98g
y-axis 200 mm
z-axis 256 mm
max. size of workpiece LxWxH 810x580x250 mm
Dimensions (L/W/H) 1700x1600x2130 mm
Wire thickness 0,03-0,3 mm
control Agiecut
Switch-on hours. 41000 h
ampere 500 A
Cietn7cc
current capacity 30 kVA
voltage 400 V
total power requirement 42 A
weight of the machine ca. 0,2 t
dimensions of the machine ca. 0,6 x 0,7 x 1,2 m
MIG welding source transformer with 60 A/12-17 Volt - 500A/39-42 Volt
TIG welding machine as LEX type TGKW 57
Masch. No. 570467 built in approximately 1989
Hwvgrotdg
Power 250 amp. -60% ED
190 amp. -100% ED
Infinitely variable adjustment range
Package length 3.5 m
Power supply 380 Volt, 50 Hz, 16 amp. Plug
-Direct current and alternating current
-Display for welding current in amps (AC-DC)
HF ignition
-2-stroke and 4-stroke welding equipment
-Switchable for electrode welding
-Water cooled
Inert gas-Druchminderer
Dimensions L x W x H 1150 x 520 x 760 mm
Weight ...
Earth cable for inert gas device, electrode device
-different: lengths
-Dinse connector
-Price per meter: 4 EUR/m
-Number: several cables available
-Price: per meter
Jwl9cq
length / mm
height / mm
total power requirement / kW
Type: US 100 E 300
Brcygx20kw
Nominal power: 100 kVA
max. weld length: 324 kVA
1 used CNC - stud welding machine
make SOYER
type KTS-800 CNC
year of manufacture 1999
Control: Engelhardt Minipos 11
table area: 900 x 700 mm (table with 6 T-slots)
travels X: 800 mm, Y: 600 mm
feed speed: max. 12000 mm/min.
Welding head feed stroke: 120 mm (pneumatic)
Welding head height adjustment: 140 mm (manual via hand crank)
Distance table/welding tip 130 - 270 mm (with lifting cylinder above)
portal passage W x H: 1040 x 195 mm
table height above floor: 1020 mm
Welding system: tip igniti...
table-size 500 mm
weight max. in kg ca. 500 kg
Bslzowt2vh
2 Stück
weight of the machine ca. 350 kg
current capacity 50 kVA
throat 550 mm
contact pressure capacity . kp
weight of the machine ca. 290 kg
dimensions of the machine ca. 640 x 930 x 1550 mm
Bp3ie8oqit
The machine is like new.
Straightening and welding plate self-construction
Bdro882w0v
Length 2500 mm
Width 1230 mm
165 mm thick
Thickness approx. 40 mm
Table height 805 mm
-Flat steel base with strong ribbing
Weight approx. 1300 kg.
good condition
Inert gas welding device, inert gas device, welding rectifier
-without wire feed
S0yknsea3
-Max. Welding power: 350 A
-Dimensions: 700/600/H1400 mm
-Weight: 62 kg
