Used Wire Reel for sale (3,504)

Condition: excellent (used), Year of construction: 2026, Wire reel, pasture wire reel, barbed wire winder, wire winder, wire winding machine, pasture fence winder, winding device -Drum diameter: 800 mm -Drum width: 990 mm -Drive: hydraulic -The device could be used with a corresponding front loader or three-point hitch Klsdpfexvh Hujx Apyjr -without front loader mount and hydraulic connections -Dimensions: 1020/1450/H830 mm -Weight: 318 kg

Condition: new, Year of construction: 2024, Conveyor belt winder. A machine designed for winding up belts used in conveyor belts. We are a manufacturer of belt winding machines. We design and manufacture machines tailored to customer requirements. Model Z45-20 with a load capacity Kodpfstzbw Rsx Apyjlr 20,000 kg and a winding diameter of 4,500 mm. Model R32-10 with a capacity of 10,000 kg and a winding diameter of 3,200 mm. We can make machines with other parameters. Infinitely variable speed control, diameter control, programmable winding length. We design and manufacture pneumatically operated reel chuck.

Condition: used, Module converter, electronic module Ksdpfx Apefcl H Ueyjlr -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg

Condition: good (used), Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -Dimensions: 275/275/H225 mm -Weight: 8.1 kg Kedpfx Apefcl H Ieyolr

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Klodextwddspfx Apysr

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Electric with foot pedal, max format 710 mm. Punches up to 20 sheets of 80 gsm with square holes. Kljdpfx Apsymn Hwoyer You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Please request a price including transport (location: Netherlands). Kind regards, Henk Hoos.

Year of construction: 2006, condition: used, Ultrasonic and electrolyte cleaning, wire cleaning line, wire cleaning plant, wire treatment plant Manufacturer: Sirio-Wire Type: M0209 Kljdpfef Nku Rox Apyjr Number of wires / cores: 12 (6+6) Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying. Year of construction: 2006 The plant was only in operation for about three years, then the production was moved to another location. Process: Ultrasonic and electolytic cleaning in a hot bath. On the manufacturer's website siriowire you will find a detailed description of the process under "Ultrasonic and Electolytic Cleaning". The unit is in good working condition and is complete except for the pumps. On the photos the catwalk for the operator and the collecting basin in which the plant stands are missing, these photos are still supplemented. On the last three photos you can see plants of this design in operation.

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor with tachometer dynamo and cooling fan -Engine: Type GLF 100/13 -Voltage: 170/200V -Power: 6.5 kW Klsdpfx Apoq Rxz Toyor -Speed: 3000 rpm -Tachometer dynamo: Hübner TDP 0.2 T-4 60V 1000/max. 9000 rpm -technical Data: see photo of nameplate -Shaft: Ø 28 x 45 mm -Design: B5 -Dimensions: 640/250/H390 mm -Weight: 57 kg

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 331965, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, wire diameter (max.): 0.25 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 250 mm Z-axis travel: 200 mm (U/V) axis travel: 400 x 250 mm Taper angle: +/- 30° at 200 mm height Workpiece weight: 500 kg Workpiece height (max): 200 mm Workpiece width (max): 500 mm Kledpfx Aoyz Rxaepyjr Workpiece length (max): 850 mm MACHINE DETAILS Standard wire guides: 0.25 mm Dimensions & weight Dimensions (L x W x H): 1,800 x 1,600 x 2,180 mm Machine weight: 2,190 kg Injection pressure upper nozzle: 0 - 11.5 bar Injection pressure lower nozzle: 0 - 11.5 bar

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 350900, workpiece weight (max.): 1,000 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, wire diameter (max.): 0.25 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 250 mm Travel Z-axis: 400 mm Kljdpfx Aeyz Rvljpysr Travel U-axis: 400 mm Travel V-axis: 250 mm Workpiece weight: 1,000 kg Workpiece height (max.): 400 mm Workpiece width (max.): 500 mm Workpiece length (max.): 850 mm Taper angle: +/- 30° at 400 mm height MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,600 x 2,230 mm Machine weight: 2,500 kg Standard wire guides: 0.25 mm EQUIPMENT Collision protection in X/Y/U/V/Z

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 02DC2563, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, The machine will remain in operation until 08/04/2026! TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 310 mm U/V-axis travel: 150 mm Max. workpiece weight: 1,500 kg Maximum workpiece dimensions: 1,050 x 820 x 305 mm Taper angle (workpiece height): 15 mm / 260 mm or 30 mm / 110 mm Table dimensions: 840 x 560 mm Possible wire diameters: 0.10 - 0.30 mm Wire spool capacity: 10 kg MACHINE DETAILS Dimensions & Weight Machine dimensions: 2,687 x 3,030 x 2,150 mm Klodpfx Asyzh Daepyjr Machine weight: 3,500 kg EQUIPMENT Hardened 3-sided table

Condition: excellent (used), Year of construction: 1989, Machinetype: barbed wire machine Make: VITARI Type: MFS Constr. year: 1989 line wire diameter: 1,6-2,8mm point wire diamter: 1,6-2,5 mm Klodpow N D Sujfx Apyjr output – meter/min: 27-47 distance of barbs: 50-150mm Excellant condition

Condition: excellent (used), Year of construction: 1994, Nail making machine Make: WAFIOS Type: N90 Constr. year: 1994 diameter range: 2,5-3,8 mm Kljdpfxjuhxqmj Apyer nail length: 50-90 mm output – pieces/min: 800 Machine includes Automatic wire paz off and wire cleaner !!

Condition: good (used), Year of construction: 1980, Technical Details ; Wire Diameter - 1.2- 4,5 mm Nails lenght - 10- 150 mm Capacity - 800 kg/h List of equipment : 1x Wafios S150 2X Wafios S120 Kjdpovfc A Tsfx Apyolr 1x Kovopol THA 60 1X Kovopol THA 100 1X Moroni SPND 80 2x Nails polishing machine Wire Drawing Line SKET 5 Blocks Wire input - max. 6,0 mm Complete nail making plant in good working condition !! wire output - min. 2,5 mm

Condition: used, Year of construction: 1989, Model - 600/6 Year - 1989 Dies suitable for drawing low carbon steel wire rod entry diameter 5.5/6 mm max. They are two mirror dies and one has 5 steps and the other 6 steps. All with 600 mm shooting capstans. They both have a vertical skein for winding yarn onto loops. DC electrical equipment included. Ksdeyubh Rjpfx Apyslr The dies will be sold in their "used, working, seen and liked" condition.

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Kodor Nfvmspfx Apyslr Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Year of construction: 1987, condition: good (used), Technical Details : Input wire - 7.0 mm Kjdpfxsdzru Uo Apyjlr Out put - 1,8 mm Vertical and horizontal Coiler Motor power - 55 Kw/ Block

Year of construction: 2017, condition: like new (used), 2D Wire Bending Machime Year - 2017 Manufacturer - VIBRA Wire diameter - 1-4 mm Capacity - 30pieces/ min Power - 3,5 kw Kjdpfx Apsmqk Tpeyelr

Year of construction: 1997, condition: good (used), Machine info: EVG Polybend stirrup machine PBE 2-16 come with 2 Pay offs - build in 1997 comes with a complete new control unit - original EVG Single wire: 6 –16 mm Twin strand: 6 –12 mm Voltage 400 Volt 50 Hz 30 Kw Production year: 1997 Ksdon Ut A Sepfx Apyslr

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Wire diameter range: 2,0 - 10,0 mm Wire feeding length: unlimited No. of CNC-axes: 5 Bend-back clearance: max. 600 mm Weight: 2.400 Kg. *with chamfering unit* complete with an motorized wire decoiler table diamtere: 1.500 mm Klsdey Ehrfopfx Apyjr loading capacity: 1.500 Kg.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Wire diameter range: 2,0 - 6,0 mm Wire feeding length: unlimited Kljdpfxoy Ehpws Apyor complete with an motorized wire decoiler WAFIOS H 3 table diamtere: 1.600 mm loading capacity: 1.500 Kg.

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000 Year of manufacture: 2013 Travel ranges: X= 500 mm, Y= 350 mm, Z= 256 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.33 mm (incl. KIT 50) Submerged-type machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Includes AGIEJOGGER handbox for convenient setup Includes AGIESETUP 3D Includes automatic wire changer AWC (use of 2 wire spools) Includes Conic-Plus option Includes Fast-Threading option Includes Smart-Threading option VISION 5 control system AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine has been thoroughly cleaned, overhauled, and extensively tested. A laser measurement of the axes was performed in-house. We are happy to carry out an individual test on the CUT 3000 for you. Including user training at Techma on your overhauled machine Optional services we offer: - Transport Kodpsy Ed Enjfx Apyslr - Commissioning - Chiller - Clamping devices - Consumables

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 07D1M931, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, wire diameter (max.): 0.3 mm, wire diameter (min.): 0.1 mm, TECHNICAL DETAILS Travel range X-axis: 400 mm Travel range Y-axis: 300 mm Klodpjy Emxqefx Apyer Travel range Z-axis: 220 mm Travel range U/V-axis: 120 mm Cutting angle at 87 mm: ±30° Cutting angle at 200 mm: ±15° Wire diameter: 0.1-0.3 mm Max. workpiece dimensions: 810 mm x 700 mm x 200 mm MACHINE DETAILS Machine weight: 2,700 kg

Condition: used, Year of construction: 2006, Wire erosion / EDM Travel distance X: 570 mm Travel distance Y :370 mm Travel distance Z: 350 mm max. workpiece size X: 770 mm max. workpiece size Y: 520 mm max. workpiece size Z: 340 mm max. workpiece weight: 1000 kg table size X: 806 mm Ksdoy Egfkspfx Apyslr table size Y: 496 mm with AWF ( Automatic Wire Feeding ) U / V axis: 120 x 120 mm generator: 60 Ampere 3-sided rise and fall tank Linear drives on axes X, Y, U, V Linear scales on axes X, Y, U, V Automatic high-speed wire threading unit Ceramic components integrated in working table, Z axis quill, clamping block, wire guide Dielectric cooling controlled by thermostat 15" TFT colour monitor Max. matching current 60 A CNC power supply unit LQ33W

Condition: used, Year of construction: 2021, Wire erosion / EDM Travel distance X: 800 mm Travel distance Y :600 mm Travel distance Z: 500 mm max. workpiece size X: 1050 mm max. workpiece size Y: 800 mm max. workpiece size Z: 295 mm max. workpiece weight: 1500 kg table size X: 1150 mm Kljdpjy D N Eksfx Apyjr table size Y: 850 mm with AWF ( Automatic Wire Feeding ) U / V axis: ja Total operating hours: 4316 SPW-E Generator 8-axis simultaneous control WS5P rotary table (indexing or simultaneous movement) Taper Flex 45 NEO (for taper cutting up to 45°) Linear motors (X, Y, U, V axes) Absolute linear scales (X, Y, U, V axes) Sodick Motion Controller Ceramic work zone Remote controller 3-sided rising and lowering work tank Four-stage filtration system Improved operator usability Advanced wire tension control SODICK Fine Corner Control Energy-saving system Digital PIKA W Plus for highest surface finish DSF (Dynamic Shape First) Fixed Jet AWT (Automatic Wire Threading) Automatic water level control Wire end remover Dielectric cooling unit Voltage stabilize r LAN interface 19" TFT color display Intelligent Q3vic EDW Anti-virus software USB interface Work light Integrated 20 kg wire feeder L-Cut (wire chopper) 8-axis simultaneous control