Used Alup Solo 15 for sale (51)

Condition: good (used), Year of construction: 2007, Alup Solo 15 Screw Compressor Fully automatic, fully piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-damped, and variable speed. Bwedpfx Agewldi Tskei Discharge pressure: 13.00 bar Motor power: 15.00 kW Free air delivery: 0,39 - 2.18 m³/min

Condition: used, feed pressure / bar liter capacity / l Air consumption / m³/h For sale is a powerful ALUP Solo 18 screw compressor with 18.5 kW motor power, ideal for industrial use. The compressor is offered including a high-quality DRYPOINT RA refrigeration dryer from Kaeser - for reliable and efficient compressed air drying without moisture problems. The ALUP Solo 18 is a compact, oil-injected screw compressor, which is suitable for medium to large operations. It is characterised by its energy efficiency, low noise levels and high reliability Technical specifications Motor power: 18.5 kW Max. Operating pressure: 13 bar Delivery rate: up to 200 m³/h Low-noise and energy-efficient Including DRYPOINT RA refrigerant dryer for dry, clean compressed air Bwodjwz Ry Dspfx Agkei Including compressed air tank for pressure stabilisation and condensate management Perfectly suited for demanding industrial applications Technical data taken from publicly available sources

Condition: good (used), Year of construction: 2005, Alup Solo 11 plus Screw Compressor Fully automatic, fully piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-damped, and variable speed. Discharge pressure: 13.00 bar Bodpfx Agswlfchekswi Motor power: 11.00 kW Free air delivery: 0.39 - 1.94 m³/min

Condition: excellent (used), Screw Compressor Brand: Alup Model: SCK 15-8 Year: 2008 Free Air Delivery: 1.7 m3/min Pressure: 8 bar Motor Power: 11 kW - 380 Volt Load Hours: 14,242 Operating Hours: 42,034 Length: 1,530 mm Width: 620 mm Height: 900 mm Bwsdexcybdepfx Agksi Weight with pallet: 230 kg

Condition: excellent (used), Year of construction: 2011, SCREW COMPRESSOR ALUP ALMIG 115Kw INVERTER 11r Screw compressor ALMIG VARIABLE 115 machine with inverter and heat exchanger after service Technical data: capacity: 3.67-19.48 m3/min; engine 115KW; max. pressure 13bar; year;2011 Bwjdpfxothdabs Agksi mileage;18624h; compressor fully functional, warranty,

Condition: used, mileage: 1,001 km, power: 22 kW (29.91 HP), gearing type: other, color: grey, first registration: 01/1964, Year of construction: 1964, driver cabin: other, Vehicle location: Bovenden, Working pressure 17 bar! Boiler diameter 775mm! 2x 4-cylinder single compressor 2-stage type HL1785 Z4! 2x 15 HP! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bedpfx Agsvhl H Hokjwi - .

Condition: excellent (used), Year of construction: 2015, volume flow: 1.6 m³/h, pressure (min.): 13 bar, ALUP ALLEGRO 11 Screw Compressor Variable speed (inverter-controlled) Motor 11 kW Bwodpfjymmdnsx Agkoi Capacity 1.60 m3/min Pressure 13 bar Year of manufacture 2015

Condition: good (used), Year of construction: 2019, machine/vehicle number: API596817, overall weight: 960 kg, pressure (max.): 12.75 bar, Equipment: refrigerant dryer, type plate available, PROD. ALUP TYPE EVOLUTO 45 S/N API596817 YEAR 2019 CAPACITY (kW) 45 OUTPUT (m3/min) 6.78 CIS (bar) 12.75 INVERTER YES BUILT-IN DRYER YES Bwjdsv E Hwnjpfx Agkei EXCHANGER YES ON THE TANK NO DOCUMENTS NO NEW/USED USED

Condition: new, AGRE ALUP ALLEGRO 14+ 13 270 Speed controlled. Space-saving. Inexpensive. Efficient 1:1 direct drive. Easy operation. Low energy consumption. High performance. Suitable for a wide range of applications. Convincing compressed air quality. Cyclone separator and refrigeration dryer built in. Bjdpfx Ageixt I Hskowi Equipment in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled design Drive: High frequency motor, with 1:1 direct drive Control: Speed controlled with frequency converter Control: Graphic control C55DD Refrigerant dryer: Integrated, refrigerant R513A Filtration: incl. cyclone separator Container: horizontal, painted Performance data: Volume flow at operating pressure 7.0 bar = 0.26-2.26 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 16.2 kW Rated power motor 15 kW Oil quantity 5.2 lt Dimensions and weight: L x W x H = 1655 x 655 x 1550 mm weight 400 kg Compressed air outlet G 3/4'' Capacity compressed air tank 270 lt

Condition: new, Screw compressor AGRE Model Sonetteo 7,5+ 10 Screw compressor compact unit incl. refrigerant dryer and DL tank 270 lt. Belt driven. Space saving. Inexpensive. Easy operation thanks to Infologic² Basic control. Efficient compressor stage. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Mounted refrigeration dryer. Equipment in detail: Compression concept: oil-lubricated screw compressor Cooling: air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: fixed speed Control: Infologic² Basic control unit Refrigerant dryer: Mounted, refrigerant R513A Tank: 270 lt. horizontal painted 11 bar Motor power: 5,5 kW Pressure: 10 bar Delivery rate: 780 lt./min incl. time controlled condensate drain Bwedehun Tzopfx Agkji Dimensions L x W x H = 1500 x 1350 x 600 mm

Condition: new, Screw compressor with refrigeration dryer Belt-driven. Space-saving. Affordable. Bwodpfx Agswm Ih Aoksi Easy operation thanks to Infologic² Basic control. Efficient compressor stage. Perfect solution for industrial and trade businesses. Impressive compressed air quality Features in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Control: Infologic² Basic control unit Refrigeration dryer: Attached, refrigerant R513A Receiver: Horizontal, painted, manufactured according to AD2000 Performance data: Flow rate at operating pressure 9.5 bar: 0.98 m³/min Operating pressure min. / max. 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 9.6 kW Rated motor power; IP55 7.5 kW Oil volume 3.2 lt Pressure dew point of refrigeration dryer (20°C 100% RH) approx. +3 °C Installation data: Ambient conditions min. / max. 1 / 46 °C ΔT above cooling medium temperature 2 °C Cooling air requirement 756 m³/h Free fan pressure 30 Pa Noise level 68 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight: Length x width x height 1540 x 665 x 1350 mm Weight 240 kg Compressed air outlet G 1/2" female Compressed air tank capacity 270 lt INCLUDES OPTION: Aftercooler C43 MINI (so that the Condensate accumulation is reduced to a minimum)

Condition: new, AGRE ALUP SCK 10-10 270+ Belt driven. Space saving. Inexpensive. Easy operation. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Built-in refrigerant dryer. Sound-insulated screw compressor with V-belt drive on compressed air receiver 270 l with built-in refrigeration dryer, integrated cyclone separator, with electronic condensate drain and C55 graphic control. Equipment in detail: Compression concept: oil-lubricated screw compressor Cooling: air cooled Drive: Efficient IE3 motor, belt drive Control: fixed speed Control: Aircontrol 5.0 Refrigerant dryer: attached, refrigerant R513A Filtration: incl. cyclone separator Tank: horizontal, painted, manufactured according to AD2000 Performance data: Volume flow at operating pressure 9.5 bar = 1.06 m³/min operating pressure min. / max. 5,5 / 10,0 bar Total power consumption at 9.5 bar / full load 10.2 kW Bwsdpfxsixt H Ns Agkoi Rated power motor; IP55 7.5 kW Oil quantity 4 lt Dimensions and weight: L x W x H = 1530 x 662 x 1531mm weight: 310 kg Compressed air outlet: G 1/2'' Compressed air tank capacity: 270 lt

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: CAI946254, overall weight: 466 kg, volume flow: 283.8 m³/h, pressure (max.): 13 bar, Equipment: type plate available, PROD. ALUP TYPE ALLEGRO26 CE S/N CAI946254 YEAR 2016 CAPACITY (kW) 26 OUTPUT (m3/min) 0.77-4.73 at 7 bar Bedpfx Agewn Dxyokewi CIS (bar) 7-13 INVERTER yes BUILT-IN DRYER no EXCHANGER no COOLED (AIR/WATER) air ENGINE SIEMENS 1AU2166BAPL3, CLOSED CONNECTION 1" NEW/USED used

Condition: excellent (used), Year of construction: 2020, MANUFACTURER: ALUP MODEL: LARGO90 Serial No.: API178867 Year: 2020 Power (kW): 90 Capacity (m3/min): 15.07 Pressure (bar): 10 Operating hours (documented/total): approx. 22,000 Frequency inverter: no Bwjdpfxoyk Taqe Agkei Integrated dryer: no Heat exchanger: no Cooling (air/water): air Mounted on tank: no Documentation: yes Connection: 1 1/2 New/Used: Used

Condition: good (used), Year of construction: 2015, machine/vehicle number: API173019, overall weight: 1,670 kg, volume flow: 1,005 m³/h, pressure (max.): 10 bar, Equipment: type plate available, We offer: ALUP ALLEGRO90 SN: API173019 YEAR: 2015 CAPACITY: (kW) 90 OUTPUT: (m3min) 16.75 CIS: (bar) 10 INVERTER: yes BUILT-IN DRYER: no EXCHANGER: no COOLED: (AIR) air ON THE TANK: no DOCUMENTS: no NEW/USED: USED Bwsdpov Dr Nyjfx Agksi

Condition: excellent (used), MANUFACTURER: ALUP MODEL: ADQ2700 SERIAL NO.: 07M011498 YEAR: 2007 POWER (kW): 8.7 CAPACITY (m3/min): 45 PRESSURE (bar): 12 HOURS (DOCUMENTED/TOTAL): Bjdpfx Aeykvphogkswi

Condition: used, Year of construction: 2003, MANUFACTURER: ALUP MODEL: SCK 101-08 Bwsdpfx Asyi D Hrsgksi Serial number: 217586 Year: 2003 Power (kW): 75 Capacity (m³/min): 12.9 Pressure (bar): 8

Condition: excellent (used), Year of construction: 2022, volume flow: 5.45 m³/h, pressure (min.): 13 bar, ALUP EVOLUTO 45 screw compressor Variable speed (inverter controlled) 45 kW motor Capacity 5.45 m³/min Bwsdpfx Agsyh Nc Hsksi Pressure 13 bar Year of manufacture: 2022 Operating hours: 6,400

Year of construction: 2022, condition: ready for operation (used), Two ALUP compressors including two heat exchangers are available. Operating pressure: 7bar, max. pressure: 13bar, max. inlet temperature: 55°C, power range: 11kW-30kW, refrigerant: R513A, refrigerant quantity: 500g, weight: approx. 290kg. Documentation available. An on site inspection is possible. Bwsdoycwr Uopfx Agkji

Condition: ready for operation (used), Volume flow: 650l/min, motor power: 5.5kW, tank volume: 350dm³, operating pressure: 10bar. On-site inspection is possible. Bsdpfx Agevn S S Ajkewi

Condition: good (used), Year of construction: 2005, functionality: fully functional, 400 l tank, 3.8 kW, 10 bar, with condensate drain, was used as a backup compressor, in good condition. Price ex-location. Transport available at extra cost! Bwsdsybbfispfx Agkei

Condition: used, Year of construction: 1987, Final compression pressure: 10 pe/bar Bodsxygbljpfx Agkewi Speed: 745 rpm Volume flow: 3455 dm³/min Motor power: 22 kW

Condition: excellent (used), Year of construction: 2019, ALUP ALLEGRO 76 10 screw compressor, machine with inverter, after service Bjdsyfnx Rspfx Agkewi Technical data: capacity: 12.18 m3/min; motor: 75 kW; max. pressure: 10 bar; year: 2019; operating hours: 8,703 h; compressor fully functional, with warranty, net price: PLN 32,500 gross price: PLN 39,975 Below is a link to a video.

Condition: good (used), Year of construction: 1997, overall weight: 3,500 kg, volume flow: 1,158 m³/h, pressure (max.): 10 bar, Equipment: type plate available, Compressor: - ALUP Bodpfx Asrcmw Eogkjwi TYPE: - SCG181-10 S/N: - 213615 Year of manufacture: - 1997 Power (kW): - 132 kW Capacity (m/min): - 19,3 Cis. (bar): - 10 bar

Condition: excellent (used), Year of construction: 2016, volume flow: 2.16 m³/h, pressure (min.): 8 bar, ALUP ALLEGRO 14 screw compressor Variable speed (inverter) 15 kW motor Bsdpjyb Svfofx Agkswi Output 2.16 m3/min Pressure 13 bar Year of manufacture 2016 Net price 12,500,- Gross price 15,375,-