Used Alzmetall Ab 3 Esv for sale (129)

Condition: excellent (used), Functionality: fully functional, Column drilling machine Alzmetall AB 3/ESV Technical data: >> Year of construction approx. 1980 Machine no. 7759 >> Drill spindle speed infinitely variable approx. 140 - 1600 rpm >> Drilling capacity in steel ST 60 28 mm >> Drilling capacity in steel ST 60 32 mm >> Spindle holder MK 3 >> Drilling stroke 180 mm >> throat depth 290 mm >> Rotary table with 2 T-slots 450 mm >> 3 feeds 0.1 ; 0.2 ; 0.3 mm/rev Bsh9Fdkc79S >> Drive 380 V / 0.9 / 1.3 kW >> Coolant device >> Machine weight approx. 280 kg About the machine : On offer is a high-performance Alzmetall AB 3/ESV pillar drill from a training workshop. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine under power on site.

Condition: good (used), Year of construction: 1960, machine/vehicle number: 5719, Offer 23025 Dpfhah Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drill spindle holder MK 3 long spindle - Drill spindle stroke 180 mm - Drill spindle speed infinitely variable 80 - 1420 rpm - Clockwise - counter-clockwise rotation - 3 feeds 0.1 / 0.2 / 0.3 mm/rev - throat depth 290 mm - max. distance table - drill spindle 620 mm - Table with 2 T-slots 600 x 450 mm - Height adjustable via rack and pinion with hand crank - Drive 380 V / 1.0 / 1.5 kW - Space requirement approx. W 750 x H 1900 x D 700 mm - Weight approx. 280 kg

Condition: used, Year of construction: 1976, bore capacity in steel (diameter) 35.0 mm bore capacity in cast iron 40.0 mm throat 300 mm Cunss9Xeca bore stroke 180 mm turning speeds 65 - 1750 U/min table-size 425 x 500 mm column diameter 155 mm feed 0.1-0.2-0.3 m/min spindle taper MT 4 MK engine output 0.9 / 1.5 kW weight 450 kg range L-W-H 800 x 650 x 1850 mm Equipment: - robust motorized pillar drill with VARIO drive (V-belt) - electro-automatic spindle feed - pole-changing motor - stepless speed adjustment (VARIO drive) - adjustable drilling depth stop - machine table with 2x T-slots * height adjustable via hand crank - machine vice - connection cable + connection plug - operating instructions (PDF)

Condition: used, Column drilling machine ALZMETALL type AB 3 ESV B2Pcd0Gr Machine no. No. 15967 Year of manufacture 1977 Drilling capacity 32 mm Spindle holder MK 3 - short quill throat 290 mm Quill stroke 160 mm Table size Ø 545 mm Column diameter 220 mm Spindle speed 55 - 1450 rpm infinitely variable Motor power 1 / 1.6 kW Mains connection 380 Volt, 50 Hz. - Spindle speed via 2 gear stages, 2 motor speeds and infinitely variable via variator gearbox - Preload stage for high torque at low speeds - MK adapter from MK3 to MK4 - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Rotatable drilling table - Table height adjustment via hand crank - Machine base with machined workpiece support surface - Lighting for the work area Space requirement L x W x H 1150 x 650 x 2000 mm Weight 850 kg Good condition

Condition: ready for operation (used), Alzmetall AB 3 ESV drilling machine Column drilling machine Drilling capacity: 28mm -35mm throat depth: 280mm Dqopkh Column diameter: 130mm Quill stroke: 180mm Tapping device 3 drilling feeds: 0.1 / 0.2 / 0.3 You are welcome to visit us for an inspection. We are happy to organize a cost-effective forwarding agency for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, Year of construction: 1975, bore capacity in steel (diameter) 35 mm throat 280 mm bore stroke 180 mm taper MK 3 MK table-size 600 x 470 mm feeds 0,1 - 0,2 - 0,3 mm/U turning speeds 65 - 1750 U/min Co8Jhtihx0 total power requirement 1,6 KW weight of the machine ca. 0,45 t dimensions 1,2 x 0,8 x 2,15 m Automatic feed Spindle speeds infinitely adjustable Coolant system

Condition: used, bore capacity in steel (diameter) 25 mm Dqmdwr throat 293 mm bore stroke 150 mm spindle taper MK 3 table surface area 320 x 300 mm spindle turning speed range 160 - 1420 U/min total power requirement kW weight of the machine ca. 300 kg dimensions of machine L x W x H 0,90 x 0,65 x 1,79 m Accessories: drill chuck 1 - 13 mm

Condition: used, Year of construction: 1984, bore capacity in steel (diameter) 30/35 mm throat 300 mm bore stroke 140 mm table-size 700 x 500 mm spindle taper MT 3 Ctf3Ahbn number of spindle speeds 65 - 1750 UpM total power requirement 1,7 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1 x 1 x 2 m Pillar drilling machine.

Condition: ready for operation (used), Year of construction: 1975, Available immediately from location : Column drilling machine Alzmetall Type AB 3 ES year of construction 1975 Recording MK 3 Drilling capacity 32 mm Table diameter 550 mm throat depth 290 mm quill stroke 160 mm Bsniotnuvjm Pillar diameter 220 mm Spindle speeds 55 - 1450 rpm Drive 1/1.6 kw Weight 850 kg Accessories: vice, holders, drill At a price of Euro 1,250 plus VAT ex location

Condition: good (used), Year of construction: 1984, Alzmetall AB 3 E pillar drilling machine Dmv9Od

Year of construction: 1978, Condition: used, number of spindles 3 Benrsuhob7 bore capacity in steel (diameter) 40 mm bore stroke 180 mm weight of the machine ca. 2,3 t

Year of construction: 1970, Condition: good (used), machine/vehicle number: Unbekannt, QUOTE Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle mounting MK 3-long spindle - drilling spindle stroke 180 mm - Drilling spindle speeds infinitely variable approx. 140 - 1600 rpm - 3 feeds 0,1 ; 0,2 ; 0,3 mm/rev - throat 290 mm - max distance table - drilling spindle 620 mm - rotary table with 2 T-slots 450 mm Bpfmhori - Height adjustable via toothed rack with hand crank - Coolant device - Drive 380 V / 0,9 / 1,3 kW - Space requirement approx. W 750 x H 1900 x D 700 mm - Weight approx. 280 kg

Condition: good (used), Year of construction: 1976, Functionality: fully functional, throat depth: 285 mm, spindle speed (max.): 1,400 rpm, spindle speed (min.): 55 rpm, total height: 1,865 mm, spindle stroke: 160 mm, Alzmetall pillar drilling machine Model AB 3 ESV Year 1976 Mounting MK3 spindle stroke 160 mm Cfitbbzuyq throat 285 mm Spindle speed 55 - 1400 rpm via AZ gearbox infinitely variable Feed: 3-electromagnetic feed clutch with overload Coolant device incl. coolant base plate with pump, machine light Emergency stop switch Weight 380 kg

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 28 mm throat: 285 mm bore stroke: 165 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 3 spindle speed:: 65 - 1.750 / 4x steples U/min feed: 0,1; 0,2; 0,3 manuell/automatisch mm/U Distance spindle/table max.: 80 - 680 mm table clamping surface:: 500 x 370 mm table rotating: 360 ° drill table adjustment: 600 vertical mm column diameter: Ø 130 mm total power requirement: 7,5 kW weight of the machine ca.: 273 kg dimension machine xH: 0,9 x 0,6 x 1,9 m Bru9Vaqv The machine can cut threads, change of direction left/right selectable via foot switch and/or depth stop Table can be swiveled and adjusted in height. *

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 3500 Main Drive Number of axis 3 Movement Bsi7Rm8C0F0 X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 600 mm Additional Equipment Chip spray hose with spray gun HR 410 electronic handwheel High pressure coolant pump: 16 bar, 30 l/min 3D touch probe with infrared transmission Heidenhain This 3-axis Alzmetall CS 600/3 vertical machining center was manufactured in 2008. It features a robust 3500kg machine weight, X/Y/Z travels of 600mm/400mm/600mm, and a high-pressure coolant pump capable of 16 bar, 30 l/min. Equipped with a 3D touch probe with infrared transmission by Heidenhain and an HR 410 electronic handwheel. If you are looking to get high-quality milling capabilities consider the Alzmetall CS 600/3 machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 1999, Condition: excellent (used), Drilling capacity (steel): 18mm Drilling capacity (cast): 23mm Csmzn2Ubxv Thread cutting (steel): M14mm Spindle holder: MK 2 Spindle stroke: 100mm Extension: 250mm Column diameter: 90mm Power: 0.55 kW Spindle speed: 125 – 2400 RPM / 225 – 4300 RPM

Condition: used, Year of construction: 1985, bore capacity in steel (diameter) 20/30 mm throat 293 mm bore stroke 120 mm speeds 10 / 125-1600 U/min spindle taper MK 3 table-size 300 x 300 mm table width 415 mm Crnplxde0E total power requirement 0,5 / 0,7 kW weight of the machine ca. 200 kg dimensions of the machine ca. 0,42 x 0,9 x 1,79 m 10 speeds switchable via pulley and pole-changing motor. Machine dealer with own stock of 2500 m².

Condition: good (used), Year of construction: 1987, Functionality: fully functional, machine/vehicle number: 5742, - Drilling capacity in St 60, 30 mm - Short spindle MK 3 Bvmdre0F - Spindle stroke 120 mm - throat depth 293 mm - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots - Distance base plate - drill chuck 1000 mm - Feed via turnstile - Weight 220 kg - Spindle speed 160 - 2250 rpm - Operating voltage 380 V-50Hz - Infinitely variable speed adjustment by means of adjustment lever - Motor speed in 2 stages, 700/1435 rpm - Tapping device with direction of rotation changeover after reaching the end stops - Coolant system completely installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - New precision machine vice (test winner)

Condition: excellent (used), Year of construction: 1988, Alzmetall AB 30/R-1000 radial drilling machine with 3,0 kW motor Manufacturer: Alzmetall Bsnm0Jyznyi Type: AB 30/R-1000 Condition: used, very good Year of manufacture: 1988 Drilling capacity steel E335 (St 60) 40 mm Drilling capacity cast iron EN-GJL-200 50 mm Thread cutting (St60)* M 30 Thread cutting in cast iron (EN-GJL-200)* M 42 Short spindle MK 4 / MT 4 Stroke motor 0.75 kW 4 feeds 0.15-0.2-0.3-0.36 mm/rev Spindle stroke 160 mm* throat 1000 mm Drive Manual gearbox Motor: n = 1500 min-1 3.0 kw kW 12 Spindle speeds 56 / 80 / 112 / 160 / 224 315 / 450 / 630 / 900 / 1250 / 1800 / 2500 Standard equipment - Electromagnetic feed clutch with overload protection and electric handle cross switching - Clockwise rotation through contactor control - incl. motor protection switch for drive and lift motor - Base plate with T-slots - Protection class IP 54 Special equipment. - Machine light - Thread cutting device - Coolant system - Electrically controlled free-cutting device - Drilling depth fine adjustment and fixed stop - 2 x cube table 630 x 800 x 500 - Central clamping for drilling slide and boom mechanical and for column pneumatic

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg Bil79K9Iyc good condition

Condition: good (used), Year of construction: 2002, machine/vehicle number: 30768, Offer 24521 Technical data: - Drilling capacity in steel ST 60 34 mm - Drilling capacity in steel ST 60 40 mm - Tapping device ST 60 up to M 24 - Drill spindle holder MK 4 - Drill spindle stroke 160 mm - throat depth 330 mm - Table with 2 T-slots 610 x 430 mm - max. distance table - drill spindle approx. 665 mm - 4 feeds 0.1 - 0.2 - 0.3 - 0.4 mm/rev - Drill spindle speed infinitely variable 100 - 1800 rpm - Digital speed display - Digital drilling depth display - Illumination - Electric foot switch - Drive 400 V / 0.6 / 1.8 kW - Space requirement approx. W 1000 x H 2050 x D 1150 mm - Weight approx. 470 kg Crczsit2Xo

Condition: good (used), Year of construction: 1996, Machine is in good working condition. Betyjevr

Condition: used, Year of construction: 2010, Tool holder MK 40 Drilling capacity up to 40 mm steel tapping device Oiqa9Gj Stepless speed adjustment with digital display Digital drilling depth display Electromagnetic feed Coolant pump

Year of construction: 1980, Condition: used, ja feed 80 - 800 m/min 1848 0Whlk weight of the machine ca. 2,2 t

Year of construction: 1968, Condition: good (used), machine/vehicle number: 12314, Offer 22326 Technical data: - Drilling capacity in steel ST 60 35 mm - drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 4 - drilling spindle stroke 170 mm - throat 345 mm - rotary table with 2 T-slots 550 mm - max. distance table - drilling spindle 650 mm - max. distance base plate - drilling spindle 1000 mm - feeds 0,09 - 0,16 - 0,28 mm/rev. - AZ gearbox stepless with gearbox - drilling spindle speeds infinitely variable 40 - 720 rpm - right. - counterclockwise rotation - drive 400 V / 2,5 kW - illumination Cmnrpern - coolant equipment - Space requirement approx. W 750 x H 1950 x D 1000 mm - Weight approx. 700 kg