Used Angular Transfer for sale (4,225)

Condition: used, Technical details: number of spindles: 9 Stück total power requirement: 83,0 kW Bedpfxsu Idvke Aktslp weight of the machine ca.: 17,0 t TRANSFERAUTOMAT with 9x drill-and mill spindles - right 3x drill-& mill spindle, 9 stages, driven, fixed and left 3x drill-& mill spindle 9 stages, driven, fixed such as radial 3x drill-& mill spindle with 9 stages, driven, fixed i.D. *

Condition: used, Technical details: spindle taper: 40 number of spindles: 9 Stück weight of the machine ca.: 10,0 t total power requirement: 13 (17,5 PS) kW Bodpfsu Idwbsx Aktjlp dimensions of machine: LxBxH: 4100x3400x3200 mm dimensions electric cabinet: LxBxH: 2100x350x1900 mm TRANSFER MACHINE DRILL AND THREADCUTTING MACHINE - ROTARY TRANSFER MACHINE with 9x Drill-& Mill Spindles - right 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible - left 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible, such as radial 2x Drill-&Mill spindle and 1x thread cutting unit 9 stages, flexible - workpiece carrier with 8 clamping stations: workpiece holding barrel Ø 1000 mm (oil-pneumatic cycle), clamping station self-centering clamping jaws - Drilling: SK 40 intake; spindle stroke 125 mm; standard feed rate 0 - 2 m/min; RPM at 12 stages with 164-1005 rpm - Drill- and facing unit; SK 40 intake; spindle stroke 90 mm; standard feed rate 0 - 2 m/min; rapid traverse feed rate 7.5 m/min; RPM at 12 stages with 166 - 1020 rpm - 3 piece thread-cutting units: SK 40 Intake; Working stroke 125 mm; RPM at 12 stages with 31.5 - 194 rpm; clockwise and counterclockwise - 6 piece opposing drill units: SK 40 intake Equipment: - coolant system with feed - operation through control panel - chip box - counting mechanism - elevated platform with stairs i.D. *

Condition: used, Technical details: number of spindles: 9 Stück weight of the machine ca.: 10,2 t Transfer machine with 9 Drill-& Mill spindles Blodju Idwnopfx Aktep - right 2x drill -& mill spindle and 1x thread cutting spindle with 9 stages - left 2x drill -& mill spindle and 1x thread cutting spindle with 9 stages such as radial 2x drill-& mill spinlde flexible and 1x thread cutting spindle 9 stages, flexible i.D. *

Condition: used, Technical details: weight of the machine ca.: 4,0 t machine dimensions LxWxH: 1,8 x 1,8 x 0,9 m Bedju N D S Ujpfx Aktolp Machine table with 5 indexing tables for multi-side machining Application: Multi-side machining of workpieces in circular transfer machines in one operation on 5 indexing tables with clamping devices. Design: Round, fixed body with 5 round tact tables, which are arranged in the shape of a pentagon, and a centrally mounted turntable. Description: Turntable center = type Pentagon, diagonal 830mm; swing diameter Ø 873mm, side length 513mm 5x rotary indexing table, as a regular pentagon on machine body, center circle Ø = 1280mm, table shape truncated square 380x380mm, clamping device via 4 pieces make Röhm truncated cone clamping devices and 1 central centering flange, 360 ° rotatable, workpiece Ø approx. 730mm Actuation / drive is hydraulic *

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, input voltage: 230 V, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) Blodpfjzpwlmsx Aktsp - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Operating hours: 13,241 h, condition: used, machine/vehicle number: 24-02577-4 / TT-380, Temperature control unit by Tool-Temp AG, used and untested. This device is suitable for tool temperature regulation, injection molding, and process engineering applications. Operates with oil and water as heat transfer media in a single-circuit system. Maximum supply temperature is 360°C (oil) or 90°C (water), with a heating capacity of 24 kW. The pump delivers up to 90 l/min at 6.0 bar; the control system is MP-888. Operating hours are specified at 13,241, year of manufacture unknown. Accessories include a digital hour meter, analog pressure gauge, transport castors, and crane lugs for loading. Bljdpfx Aey St Uroktsp

Condition: used, Year of construction: 2001, operating hours: 26,000 h, machine/vehicle number: LC669, Used Tetra Pak TBA8 1000ml square V110, Helicap 27Technical Specifications & Performance DataThis used bottling line is configured around a Tetra Pak TBA 8 V110 filling machine for square 1.0L Brik carton packs. Manufactured approximately in 2001, the filling machine has approximately 26,000 working hours and received a total refurbishment in 2026. The line includes dedicated screw-cap application, wrap-around tray packing and interconnecting conveyor equipment for an integrated carton packaging process.Filling machine: Tetra Pak TBA 8 V110Pack format: square Brik carton, 1.0LYear of manufacture: approximately 2001Working hours: approximately 26,000 hRefurbishment: total refurbishment in 2026Conveyors: approximately 30 metres, according to the standard layoutAdvanced Automation & Control SystemsThe line combines filling, cap application, conveying and tray packing into a coordinated industrial packaging arrangement. The Tetra Pak TCAP 45 cap applicator is modified for HeliCap 27 screw caps and operates with pre-punched paper, supporting the specified carton closure configuration. The conveyor system provides product transfer between the principal operating stations.Machines of this type are typically operated through dedicated machine controls and coordinated with upstream product preparation and downstream packing equipment. Functional verification, test running and inspection have been performed following refurbishment.Production Line Integration CapabilitiesThis complete carton filling and packaging line is designed for handling square 1.0L Brik packs. Its configuration supports a logical process flow from carton filling through screw-cap application, conveying and wrap-around tray packing. It is suitable for industrial packaging and beverage production applications using the stated carton format.Machine typeManufacturer / modelYearFilling MachineTetra Pak TBA 8 V1102001Capping MachineTetra Pak TCAP 45Various EquipmentConveyor SystemWrap Around PackerTetra Pak TCBP 70The tray packer is configured for wrap-around tray applications, creating a practical downstream packaging stage for filled and capped carton packs. This arrangement can be considered for second hand carton packaging projects requiring a compact filling-to-secondary-packaging workflow.Machine Condition & Maintenance HistoryThe machines have been checked and are described as being ... Bjdpfxozwu Uhe Aktslp

Year of construction: 2006, condition: excellent (used), Transport and automation system for motor housings with control system Technical parameters of motor housing Inner diameter: 66 mm, 70 mm, 74.2 mm Wall thickness: 2 mm Length: 87.8 mm – 135 mm Material: Steel, painted Technical parameters of grinding machine - Two-belt grinding machine, type M2-120, manufacturer Weber - Includes continuous prism conveyor with adjustable speed via frequency converter System output: max. 52 pieces per minute Functional description: The motor housings are manually removed from the grid box by one person and placed on a buffer table in a defined position. A row pusher moves the foremost row onto a permanent magnetic articulated belt conveyor. The motor housings are automatically transported and transferred to a permanent magnetic combination conveyor. After a 90° deflection, the housings are buffered in a roller track. One housing is released at a time and fed to a prism conveyor. The combination conveyor is axially adjustable, so that a centric feed to the prisms is ensured depending on the housing length. After the grinding process, the motor housings are transferred to another permanent magnetic combination conveyor. After a 90° deflection, the housings are brought into a stationary position and guided onto a permanent magnetic articulated belt conveyor. With stamping number control system Syscona Blodpfezww Ecjx Aktep For secure and reliable detection of stamping numbers in metal tubes. Detection station with high-resolution CCD black and white camera with scan sensor. With control system Syscona For detection of bumps in tubes according to a pattern. HighVision HV video camera system Defective motor housings are identified and transmitted accordingly to the rejection device. A swivel cylinder directs the housings onto a parallel articulated belt conveyor, which transfers them to a buffer table. DISMANTLING by customer!

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3 from a training workshop!! Technical data: >> Machine no. 1399 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel ranges X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical quill and horizontal quill - SK-40 >> Clamping system S20x2 >> Weight approx. 1300 kg Accessories and equipment: Bodj Afy Elspfx Aktjlp >> Coolant system >> Central lubrication About the machine: Offered is a Deckel FP3 universal milling machine in good condition. All spindles can be moved easily. Most of the bellows are new. An oil change has been carried out. Mechanically and electrically inspected. Take advantage of the opportunity to inspect and test the Deckel machine on-site while it is powered up. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 240 mm capacity 45 degrees: flat 240 x 160 mm capacity 60 degrees: round 160 mm capacity 60 degrees: flat 150 x 150 mm band speed 15 - 100 m/min dimensions of saw-band 3650 x 27 x 0.9 mm Control MEP CNC total power requirement 2.2 kW Blodpo Afzuujfx Aktep weight 1200 kg The MEP SHARK 331 DIRECT is a state-of-the-art, electro-hydraulic automatic bandsaw of the highest caliber. It has been specifically developed for the high-precision cutting of solid materials, pipes, profiles, and metal bars. Thanks to its extremely robust construction and maximum flexibility, it adapts perfectly to any industrial production process. CNC electro-hydraulic automatic bandsaw featuring: * Automatic mode – for fully automated series production * Semi-automatic mode – for controlled individual cuts Technical Highlights & Industry 4.0 Readiness - Direct control technology: * Makes the sawing machine fully digital, networked, and ready for . Seamless integration into automated production lines - Intuitive 10" touchscreen display: * The completely redesigned user interface minimizes staff training time and . ensures smooth process management. - Integrated cutting library: * Once the material dimensions, type, and thickness are entered, the control . system automatically suggests the best saw blade, the ideal cutting speed, . and the optimal force parameters. The operator, however, retains full manual . control at all times. - IIoT-ready & real-time support: * Real-time data transmission enables predictive maintenance, minimizing . downtime. If necessary, technical support can access the control system . directly via secure remote access—no VPN required. - Future-proof safety: * The machine already complies with the stringent safety and efficiency . standards set for 2027. - Massive data storage: * Capacity for up to 100,000 programs and 9,999 cutting sequences. Description: - Robust, fully automatic electro-hydraulic band saw (INDUSTRIAL grade) - MEP CNC "DIRECT" control technology * User interface with an intuitive 10" touchscreen display * Includes mechanical buttons * Ensures reliable, simple, and intuitive operation * Real-time monitoring of all cutting parameters * Swivel-mounted arm for convenient and safe operation * Display and logging of alarms and error messages * Massive data storage: up to 100,000 programs and 9,999 cutting sequences - Miter cuts—possible on one side up to 60° - Protective enclosure for operator safety - Infinitely variable adjustment * Cutting speed from 15 to 100 m/min * Controlled via frequency converter (inverter) - Latest-generation hydraulic power unit * Highly efficient with low energy consumption - Material feed via stepper motor and recirculating ball screw * Mounted on opposing ball bearings * 600 mm single-stroke capacity, repeatable for cutting any desired length - Coolant tank integrated into the machine base - Chip-clearing brush - Bi-metal saw blade suitable for solid and profile materials - Tools and operating manual, including a spare parts list * Angular accuracy = 2/12 degrees * Length accuracy = ± 0.1 mm per feed stroke Information from the manufacturer – please note: If this saw is installed in a system equipped with a residual current device (RCD/GFCI), i...

Condition: used, mileage: 500 km, power: 213 kW (289.60 HP), first registration: 11/2026, overall weight: 13,990 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, loading space width: 2,350 mm, loading space length: 4,000 mm, loading space height: 500 mm, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, municipal new vehicle MAN TGM 13.290 4x4 BL CH all-wheel drive tipper with front mounting plate and Küpper Weisser winter service equipment, MAN PowerMatic 08.13 OD 8-speed automatic transmission, air-suspended rear axle, 2 x differential locks on front and rear axle, heated windshield, automatic climate control, auxiliary heater, reversing camera, driver's seat package Premium, MAN manufacturer's warranty from the date of first registration, and more. MAN manufacturer's warranty from the date of first registration (expected 11/2026) Equipment: CC short cab with rear window Wheelbase 3,250 mm 6,300 kg front axle, 9,500 kg rear axle permissible front axle load 6,300 kg, permissible rear axle load 9,200 kg all-wheel drive 4x4 differential lock in front and rear axle winter service hydraulics 2-section with screw couplings, Küpper-Weisser front mounting plate winter service lighting heated windshield hydraulic pump on the engine, double gear / tandem pump, 16 ccm and 11 ccm diesel engine with 290 hp and 1,150 Nm torque Euro 6 e Meiller Trigenius D208 3-way tipper, approx. 4.00 m x 2.35 m x 0.50 m high front wall 0.70 m high load securing with floor and side wall lashing points floor made of 4 mm steel HBW 450 swinging and folding rear wall transfer case MAN G102, with road and off-road gear transfer case lock management, electronic (VSM) MAN PowerMatic 08.13 OD 8-speed automatic transmission transmission function MAN Idle Speed Driving air conditioning, Climatronic water auxiliary heater 4 kW trailer coupling drawbar spring ring type RF40/G145B with air pressure connections trailer load with continuous braking system 12,000 kg trailer load with continuous braking system 14,000 kg technically permissible trailer load with continuous braking system 15,000 kg technically possible permissible total weight 20,000 kg permissible technical total weight 24,000 kg permissible technical possible total weight 25,000 kg tipping hydraulic connection at the rear for tipping trailers front axle leaf-sprung and rear axle air-sprung axle ratio, i=5.07 stabilizer for front and rear axle shock absorbers for front and rear axle hill start assist MAN EasyStart EBS with ABS, ASR and ESP disc brakes on front and rear axle high-performance engine brake MAN EVBec, adjustable full brake assist tire pressure monitoring system TPM emergency brake assist EBA lane departure warning LDW front detection distance warning traffic sign recognition turning assistant driver monitoring system preparation for alcohol interlock cruise control reversing motion system with reversing camera sun visor 24 V battery management system 2 rotating beacon LEDs on the cab roof work lights LED daytime running light LED high beam assistant cool box in the cab multifunction steering wheel control panel MAN EasyControl, 4 functions, can be operated from outside when the door is open electrically adjustable and heated exterior mirrors electrically operated windows MAN Media System Advanced 7 inch combined instrument panel Professional 12.3 inch MAN sound system driver's seat package Premium with driver comfort seat, air suspension, lumbar support and shoulder adjustment truck has delivery mileage municipal new vehicle with day registration expected in 11/2026 and MAN manufacturer's warranty from the date of first registration Photos are archive images Bjdpfx Aezp Tcnektjlp Vehicle is still in production Estimated delivery date 11/2026 Price NET plus 19% VAT.

Year of construction: 1993, condition: used, The REGA 6 indexer notches and prints directories onto pocket diaries, small books, or stapled/glued booklets. The machine is equipped with four processing stations and two magazines. The books are transferred from the input magazine to the processing stations and to the unloading magazine using an advancement system. Books to be notched must be manually stacked in the feed magazine. At the first processing station, a counting device and an opening finger open the book at the correct place. The index is notched in the second processing station, where each sheet is taken separately, placed on the blade, and notched. The third and fourth stations are intended for printing the directories. The use of two printing devices allows for two-color printing. Then, the book is closed and advanced to the unloading magazine to be stacked. The transport, opening, notching, printing, and stacking all occur automatically. The notched and printed books are manually unloaded from the stacking magazine. Equipped with: Infeed station Opening station Index cutting /notching station Printing station 1 Printing station 2 Delivery Various printing units/knifes etc, see pictures. Technical details: Book formats: Height: 70 - 170 mm Bjdpoxdxnfjfx Aktslp Width: 70 - 115 mm Thickness: 1 - 15 mm Paper weight: Content: 30 - 120 g/m² Cover sheet: up to 180 g/m² Tabs Number: 1 - 40 (per book) Tab width: 15 mm Tab positions: Individually programmable, up to 40 positions Number of sheets per tab 1 - 35 sheets/tab Individually programmable for each tab Notching performance Number of notches per second: 2 - 7 tabs

Condition: used, mileage: 3,50,983 km, power: 265 kW (360.30 HP), first registration: 05/2007, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: grey, gearing type: mechanical, emission class: euro5, loading space volume: 6 m³, loading space length: 4,400 mm, loading space width: 2,420 mm, loading space height: 600 mm, Equipment: ABS, all wheel drive, crane, * Sun visor * ABS * Radio * On-board computer * Cruise control * Electric windows * Electrically adjustable mirrors * Mirror heating * Sunroof * Rear window Blodsz Ewrispfx Aktep * Driver's comfort seat * Seat heating * Longitudinal and transverse differential locks * Transfer case * Off-road reduction gear * All-wheel drive axles * Steel bumper * Air intake (top) * Air dryer * Tandem trailer coupling * 2-line air connection * Hydraulic connection for trailer * Foldable underride guard * 16-speed * Suspension: leaf springs * Payload: 6860 * Continuous brake: engine brake ----Special superstructure: Crane: Atlas 105.2, foldable, radio remote control + floor control, 3-fold hydraulic extension, 6th + 7th control circuit for rotary servo and grapple operation. Read load chart: lifts 4.97t at 1.98m, 2.79t at 3.81m, 1.86t at 5.51m, 1.38t at 7.21m, 1.11t at 8.91m.----Superstructure: Meiller 3-way tipper body, front wall raised, spring-relieved side panels left + right, lashing eyes. For sale to businesses only. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID !!!!! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT + ACCESSORIES. The basis for all purchase contracts, invoices, proforma invoices, orders, sales negotiations is our General Terms and Conditions (see Imprint for details).

Condition: used, mileage: 7,99,782 km, power: 427 kW (580.56 HP), first registration: 02/2019, fuel type: diesel, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2019, The price does not include VAT and transfer of ownership. We invite you to verify the characteristics of the published vehicle. Lodotruck s.r.l. disclaims any liability for any unintentional inconsistencies with the description in the ad. Blodpfx Ao Ahuupoktop

Year of construction: 1997, condition: excellent (used), I sell the drilling machine with cutting saws COMEC FM0V8 2000, Year 1997. Working width up to 2000mm Blodjh H S Hwopfx Aktjp Configuration: 0 motors from under 1+1 motors from sides / angular adjustable 2 motors from back / heads angular adjustable 2 motors from top / heads angular adjustable 4 pcs. material pressure from top 2 pcs. cutting saw aggregates / heads angular adjustable Atypic 5-spindle drilling heads included 3 x 15mm / 2 x 25mm. Drilling heads in price. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2001, travel distance X-axis: 4,700 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 3,000 rpm, table width: 1,000 mm, table length: 5,000 mm, total height: 3,700 mm, total width: 4,500 mm, total length: 9,000 mm, workpiece weight (max.): 10,000 kg, spindle motor power: 37,000 W, CNC Bed-Type Milling Machine ZAYER - 30KFU5000 MACH-ID 9885 Make: ZAYER Type: 30KFU5000 Control: SIEMENS 840D YOP: 2001 The Zayer 30 KFU 5000 is a heavy-duty CNC bed-type milling machine manufactured in Spain. It is designed for precision machining of large, heavy and complex workpieces. With its powerful milling spindle and automatic milling head, this machine offers excellent flexibility for machining large components from multiple angles. Heavy machinery manufacturers – Machining large machine frames, bases and structural components. Steel fabrication companies – Milling, drilling and finishing large welded steel constructions. Energy and power generation – Manufacturing components for turbines, generators and industrial equipment. Oil gas industry – Machining large flanges, valve bodies and pressure equipment components. Mould and die manufacturers – Precision machining of large moulds, dies and tooling. General subcontract machining companies – Producing large, complex components in small and medium production batches. Main advantages The Zayer 30 KFU 5000 combines heavy-duty cutting capacity, excellent rigidity and versatile machining possibilities. Its automatic milling head allows horizontal, vertical and angular machining, reducing the need to reposition large workpieces. An excellent machine for companies looking for a reliable, powerful and versatile CNC milling solution for large-scale precision machining. Chain ATC 30 Positions Chip conveyor Controller Siemens 840D Coolant system filtration X-Axis: 4700mm Y-Axis: 1250mm Z-Axis: 1500mm Table Length: 5000mm Table Width: 1000mm Table load: 10000 Power on spindle: 37kW Spindle speeds: 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 15000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 15000mm/min. Millinghead auto-index:2.5 x 2.5° Length: 9000mm Width: 4500mm Height: 3700mm Bjdps Agu Tqefx Aktjlp Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2026, NEW ARRIVAL!!! CORMAK AIR55/200 Screw Air Compressor – Compact Power for Your Business Are you looking for a professional solution to power pneumatic tools in your workshop, paint shop, or small production line? The CORMAK AIR55/200 screw air compressor is the perfect choice. With a motor power of 5.5 kW and an impressive actual air delivery of up to 690 L/min, it provides a continuous supply of compressed air essential for the efficient operation of impact wrenches, air blow guns, and spray painting tools. Powered by 400 V, this model has been designed for continuous operation, making it an excellent choice for demanding applications such as smaller workshops, tire service centers, and craft businesses. Investing in a CORMAK screw air compressor is a step towards significantly improving working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The CORMAK AIR55/200 features a reliable and robust direct-drive system that eliminates vibrations and the need for belt drive adjustments. This proven solution ensures stable performance and a long service life by transferring power directly from the motor to the screw compression unit. The maximum operating pressure generated by this screw air compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM series electronic control panel, giving you access to essential compressor information and improving flexibility and control over your operations. ✅ Pressure: up to 10 bar | ✅ Air Delivery: up to 690 L/min | ✅ Power: 5.5 kW | ✅ Power Supply: 400 V Key Features That Set These Models Apart 1. Permanent Magnet (PM) Motor Technology - High energy efficiency: These motors achieve efficiency levels corresponding to IE4 or even IE5 standards. - Excellent performance at low speeds: They maintain high efficiency even at very low rotational speeds, unlike conventional motors, which lose efficiency when operating outside their rated speed range. - Compact and lightweight design: PM motors are smaller, lighter, and generate less heat. 2. Advanced Variable Speed Drive (VSD) Control - Demand-based operation: The compressor does not operate according to the traditional "all-or-nothing" principle (load/unload operation). If your equipment requires only 30% of the compressor's capacity, the compressor automatically reduces its motor speed, consuming proportionally less energy. - Elimination of unnecessary idle operation: Conventional compressors often continue running for several minutes after filling the air receiver, consuming approximately 25–30% of their rated power without producing compressed air. 3. Soft Start Technology - Reduced electrical load: Protects the facility's electrical installation by minimizing high starting currents. - More frequent start-stop cycles: Allows the compressor to start and stop more frequently without the risk of overheating the motor windings. Technical Specifications Motor Power 5.5 kW / 7.5 HP Voltage 400 V / 50 Hz Air Delivery at 0–6 bar Average 690 L/min Air Delivery at 6 bar 690 L/min Bledpfxs Agu N Ro Aktep Air Delivery at 8 bar 650 L/min Air Delivery at 10 bar 650 L/min Air Outlet Connection Diameter (G) 1/2" Dimensions with Air Receiver Tank 1430 × 650 × 1320 mm Weight 170 kg

Condition: new, new ! all stainless steel with 160 mm-head 40 kW Capacity: ± 2.500 kg/h grinder for fresh and frozen meat: 0°C to -8°C dimensions (l x w x h) : 3.000 x 2.000 x 2.000 mm + Loader for eurobins + Tool trolley for 160 mm grinder The automatic cross-feed meat grinder is a robust and versatile machine, designed for the efficient processing of both fresh and frozen meat down to -8 °C, as well as other food products. Thanks to its integrated angular feed system, the product is delivered evenly and in a controlled manner, resulting in consistent and high-quality grinding. The machine is constructed entirely from stainless steel, including the cutting worm, feeding worm, and worm housing, ensuring optimal hygiene, durability, and easy cleaning. Operation is controlled via an electronic control panel, allowing the user to select between two speeds for both the feeding worm and the cutting worm. Combined with various knife configurations, this enables a wide range of cuts, from coarse to ultra-fine grinding. For operator safety, the grinder is equipped with an observation platform that automatically stops the machine when opened, as well as a safety rail around the feeding area that immediately halts operation upon contact. Optionally, the grinder can be fitted with a loading system for 200-liter standard meat carts. This system is available in two versions: a column-type or a hydraulic side-loading variant, depending on the specific needs of the user. Bedpfx Akj Agmrpotjlp

Condition: used, The Reckmann LM 16 profile grinding machine grinds profiles on wooden workpieces for woodworking. It is used to machine workpieces with profiled surfaces. The profile is transferred to the workpiece by means of feed, an oscillating grinding block and a swivelling holder Bodpfx Aks Agf Dwotjlp Technical data: - Workpiece width: max. ~ 120 mm - Workpiece height: max. ~ 80 mm - Grinding motor: 0.37 kW

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3 from a training workshop!! Technical data: >> Machine no. 1114 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travels X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical and horizontal spindle - SK-40 >> Collet system S20x2 >> Weight approx. 1300 kg Accessories and equipment: >> Coolant system >> Central lubrication About the machine: Bjdpfx Aks Agbypstolp Offered is a Deckel FP3 universal milling machine in good condition. All spindles can be easily moved. All bellows are new. An oil change has been carried out. Mechanically and electrically inspected. Take the opportunity to inspect and test the Deckel machine on-site while it is powered up. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: used, Year of construction: 2000, Storage location: Nattheim Bjdpfx Aksvwdmwjtolp

Condition: new, Year of construction: 2023, working width: 1100 mm min. workpiece height: 4 mm max. workpiece height: 170 mm height adjustment: electrically workpiece thickness display: digital aggregates: 2 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller Link grinding shoe: elastic, sector distance 56 Electronic control: FOX 500 KTR dust brush: no motor power: 15 kW Bedpfoirmg Usx Aktslp suction connection: 2 x 140 mm machine length: 1650 mm machine width: 1820 mm machine height: 1960 mm weight: 1170 kg

Condition: good (used), Year of construction: 1983, functionality: fully functional, Universal Production and Tool Milling Machine Type: UWF 700 PH Machine No.: 5670 Serial No.: 034650 Year of manufacture:1983 Control system: Positioning and path control incl. display HEIDENHAIN TNC 135 3-axis manual input control TECHNICAL DATA Working area X-axis (longitudinal) manual/automatic: 410/390 mm Y-axis (transverse) manual/automatic: 310/290 mm Z-axis (vertical) manual/automatic: 400/380 mm Quill travel vertical: 63 mm Clamping surface, vertical: 830 x 224 mm Number of T-slots: 4 Angular table clamping surface: 700 x 285 mm 6 T-slots: 12 H8/45 mm Workpiece weight: 200 kg Distance table – spindle nose (vertical): 0 – 515 mm Distance table – spindle center (horizontal): 30 – 565 mm Drive power (at 1500 rpm): 2.2 kW Speed range: 45 – 2000 rpm Number of speeds: 12 Speed progression (geometric steps): 1.4 Tool holder (DIN 2079): ISO 40 Feed range (all axes): 2 – 1500 mm/min Rapid traverse (all axes): 1.5 m/min Operating voltage: 380 V/50 Hz Machine dimensions: 1.2 x 1.6 x 1.7 m Space required: 2.1 x 2.1 m Machine weight: 1100 kg EQUIPMENT / ACCESSORIES  Hand operation and CNC program control  Vertical and horizontal machining  Swiveling vertical milling head  Adjustable-angle vertical milling head  Various tool holders  Manual quill feed (vertical)  Angular table 700 x 285 mm  Coolant system  Coolant and chip tray  Electrically secured chip guard in work area  Mounting elements  Machine lamp Bedsx Ry Atopfx Aktslp  Documentation Condition: Control system overhauled, workshop tested

Condition: good (used), Technical Specifications Type: WS11 Manufacturer: EWAG AG, Solothurn (Switzerland) Extraction System: Present (switch "Aspiration", extraction hose) Workpiece Head: With angular adjustment (angle scale) Optics: Optics or magnifying glass as shown in the photos Connection, Weight, and Dimensions Power Connection: 380 V Equipment and Scope of Delivery Extraction system with extraction hose Optics or magnifying glass Accessories as shown in the photos Extraction system, optics or magnifying glass, and accessories as shown in the photos. Technical data is subject to change without notice. Errors and prior sale are reserved. The properties agreed upon in the purchase contract and the agreed scope of delivery shall be decisive. Bedpfx Aj Agpd Iektelp

Condition: good (used), Year of construction: 2019, functionality: fully functional, Table surface: 7,500 x 2,500 mm Positioning speed: 40,000 mm/min Positioning accuracy: = 0.06 mm/min Repeatability: 0.05 mm/min Machine weight approx.: 2,300 kg MicroStep CNC cutting system of the MG series with the following features: Bjdpjzwl Dmsfx Aktslp - Hypertherm® XPR170™ plasma power source with automatic OptiMix™ console - Plasma rotator for weld preparation - Fully automatic oxy-fuel torch - Fully automatic drilling spindle MG-40-P26 with 26.8 kW - Steel portal driven and stiffened on both sides for a clear and precise cut - AC servo motors from Panasonic for high drive power and excellent dynamics - Durable and low-maintenance planetary gearboxes - User-friendly machine control - High reliability and long service life, even in three-shift operation - MicroStep iMSNC® machine control with MMI console and 24" touchscreen - iMSNC® module | User management - iMSNC® module | Expert system - iMSNC® module | Automatic calibration of mechanical sensing - iMSNC® module | Visualization of wear parts - iMSNC® module | Assistant for loading CNC programs - iMSNC® module | Management of cutting programs (MRP) - iMSNC® module | EcoInfo - iMSNC® module | MachineInfo - iMSNC® module | Assistant for service and maintenance operations - USB 3.0 connection for storage media - Remote maintenance module MicroStep RemoteDiagnostics® - Remote maintenance access via TeamViewer - Two LCD control units on the portal - Laser pointer with automatic offset transfer - Hypertherm® XPR170™ plasma power source - Industry-leading cut quality - X-Definition - Advanced HyDefinition technology - Automatic gas console | OptiMix™ - CNC interface for the Hypertherm® XPR170™ Connection to the CNC control - Module for automatic power control of the Hypertherm® XPR170™ - Electrical and mechanical torch sensing - Remote activation of plasma power source - Double-sided cable protection (collision protection) of the portal bridge via emergency stop - Extraction table system with oscillating conveyor OXYtrac 2580 HD Main components and dimensions: 1 Table consisting of: 4 table elements WxLxH (mm) 2,600 x 2,080 x 950 Total support area: WxLxH (mm) 2,600 x 8,320 x 950 Contiguously usable working area per table: Vertical cutting: WxL (mm) 2,500 x 8,000 Bevel cutting: WxL (mm) 2,000 x 8,000 Table width (outer): W (mm) 2,830 2 Oscillating troughs L (mm) approx. 8,900 Cutting processes and associated extraction capacity: 1x Plasma max. 170 Amp., bevel cutting 1x Oxy-fuel max. 100 mm workpiece thickness regularly 200 mm workpiece thickness occasionally