Used Transfer Press for sale (29,265)

Year of construction: 2002, condition: excellent (used), MULTI-PRESS MP.610 6 DIE 6 BLOW Perfect mechanics and electronics ! 12x80 mm 105 mm CUTOFF 170 ppm YEAR 2002 Itedpsh Rkhnefx Aaner PERFECTLY WORKING AVAILABLE IN SPAIN SOME PICTURES AND VIDEOS AVAILABLE

Condition: excellent (used), Year of construction: 2008, ram adjustment: 600 mm, pressing force: 2,000 t, stroke length: 700 mm, table length: 5,500 mm, table width: 2,500 mm, Type: Stamping press Manufacturer: Aida Model: S4-20000/5500x2500/LD-ET3 Nominal press force: 2000 ton SPM: 8-24 Nominal energy: 400 kJ Slide stroke: 700 mm Slide adjustment: 600 mm Open height: 1400 mm Clearance between uprights: 5970 mm Table dimensions: 5500 × 2500 mm Lower slide table dimensions: 5500 × 2500 mm Height of slide/ram carriage: 600 mm Opening in uprights: 3100 mm Main motor power: 250 kW Cushion force: 1500 kN Cushion stroke: 250 mm Press weight approx.: 390000 kg Normal slide rest position: Top Dead Centre Maximum flywheel speed: 421.6 rpm Maximum slide dimensions: 5500 × 2500 mm Itodpfx Aajx Ifrzonor Max weight of upper die: 200 kN Power supply: 400 V, 50 Hz Minimum pneumatic supply pressure: 6 bar Hydraulic pressure in brake–clutch unit – min.: 68 bar Hydraulic pressure in brake–clutch unit – max.: 73 bar Transfer system: Transfer stroke: 0-1250 mm Maximum opening: 2500 mm Bar-closing stroke: 0-750 mm Lift stroke: 0-280 mm Internal clearance between closed bars: 1000 mm Pass-line height relative to bolster: 580 mm

Condition: like new (used), Year of construction: 2022, Manufacturer: ROVETTA / AIDA Model: DFS-TE4-20000(2) 730-250 Press force: 2,000 tons Drive: SERVO Stroke: 800 mm Stroke rate: 50 rpm Ram adjustment: 400 mm Side opening: 3,650 mm Bolster area: 7,300 x 2,500 mm Ram area: 7,300 x 2,500 mm NORDA Transfer Transfer pitch: 0-1,250 mm Transfer opening min./max.: 700 - 2,740 mm Transfer stroke: 0-350 mm Millutensil coil line Material thickness: 0.5 – 3.0 mm Itsdsx Idxmopfx Aaner Material width: max. 1,800 mm Decoiler load capacity: 20 tons

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Itedpfshtaaqsx Aanjr Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: used, LEM (Noritsu Kikai) - Made in Japan Capacity: 200ton Ijdpfx Asxuqvpsanjtr Stroke Length: 180mm SPM: 60 Die Height: 450mm Suitable for battery case production (deep drawing) The machine is in a fully working condition. We have operating videos available upon request.

Condition: used, MANUFACTURER Fagor Itsdpfxou Er Hxj Aanor MODEL AND TYPE SE4-1000-4300-2400 Mechanical Transfer Press with Coil Feed (TP5) YEAR 1994 Capacity 1000 tons Bed area 4300 mm x 2400 mm Slide area 4300 mm x 2400 mm Stroke 720 mm Shut height (min) 800 mm Shut height (max) 1200 mm Speed 10 - 20 spm Adjustment 400 mm Approx. Height above floor 8296 mm Features Coil feed, 2 bolsters F-B onto t-track, hydraulic clamping on slide, Manual clamping on bolster Transfer Max transfer beam out 2352 mm Max transfer beam in 952 mm Distance from bolster to transfer rail 765 mm Feed height 760 mm Pitch 625, 800, 1000 Clamp in/out 225 mm Lift 0 - 200 mm Height of exit conveyor above bolster 660 – 770 mm Coil Feed Max coil weight 5000 kg Max coil width 1465 mm Coil o/d 1550 mm Coil i/d 508 mm Material thickness 0.5 – 1.5 mm Max load pitch 0 – 1000 mm Material feed height over bolster 760/850 mm

Condition: used, Year of construction: 2014, Technical details: Punching capacity: 500 kN cutting capacity : 9,0 t control: Siemens Touch Panel S7 ram adjustment: 80 mm stroke of ram - fixed: 170 mm no. of strokes: 20 - 120 Hub/min distance between columns: 1140 mm dayligth: 350 - 430 mm column travel -side: 315 mm table surface area: L x B 1100 x 400 mm ram surface area: L x B 1100 x 400 mm passage opening in table: 950 x 100 mm table height over floor: 1100 mm column travel -side: 315 mm drive AC: 230 VAC/24 VDC kW operating pressure: 6 bar Number of working hours: Maschine 1: 6654 h Number of working hours: Maschine 2: 5970 h total power requirement: ca. 30 kW je Maschine kW weight of the machine ca.: 9,5 je Maschine t 2 transfer presses - PRESS LINE This transfer press line is currently equipped for the production of vehicle sockets/electrical sockets. Plant equipped with: 1. decoiler PM245 coil weight 2 t, coil width up to 450 mm Iedpfx Aasu Nfttjnstr 2. controlled strip feeder (roller feeder) 3. press 1: Deep-drawing press with five pneumatic ejectors (can be individually adjusted and expandable) 4. feeding device from the company Püschel Output up to 100 parts/minute Belt swivel conveyor for discharging the deep-drawn parts/ forwarding via steep conveyor into the gate swivel conveyor/ forwarding into the infeed of the punching press via mechanical oscillating conveyor rails 5. punch press (with preparation for ejector) Various safety fences, guards, safety switches, monitoring systems (adapted to machine guidelines) Optional: 1 unused spare flywheel gearbox Optional: complete tool set for the production of vehicle sockets (e.g. for cigarette lighters or electrical appliances) incl. complete technology and technical drawings (DXF) *

Condition: like new (used), Year of construction: 2022, functionality: fully functional, ram adjustment: 400 mm, pressing force: 2,000 t, stroke length: 800 mm, table length: 7,300 mm, table width: 2,500 mm, Type: Stamping press Manufacturer: Aida Model: DSF-TE4-20000-730-250 Year of manufacture: 2022 Nominal press force: 2000 ton Energy at 15 spm: 630 kJ Energy at 28 spm: 390 kJ Strokes per minute: — full-revolution mode: 3–28 — endulum mode (at max. feed 105 mm): 3–50 Slide stroke: 800 mm Slide adjustment: 400 mm Maximum distance between slide and press table: 1200 mm Clearance between uprights: 7580 mm Slide dimensions: 7300 × 2500 mm Table dimensions: 7300 × 2500 mm Distance between side columns (front–back opening): 3650 mm Main motor power: 2 × 750 kW Slide-adjustment motor power: 30 kW Maximum upper die weight: 35000 kg Normal slide rest position: Top Dead Centre Total stopping time at 15 strokes/min: 799 ms Safety distance: 1278 mm Safety brake pressure: 105 bar Power supply (three-phase): 400 V, 50 Hz Minimum pneumatic supply pressure: 5.5 bar Transfer system: Itodpfx Aox Ifn Asaner Transfer stroke, forward (adjustable): 0–1200 mm Opening/closing stroke for each side (bar travel, adjustable): 0–1020 mm Lift stroke (adjustable): 0–350 mm Internal clearance between bars in closed position: 700 mm Maximum opening between bars (bars fully open): 2740 mm Bar section dimensions: 220 × 220 mm

Condition: excellent (used), Year of construction: 2008, Manufacturer: ROVETTA / AIDA Model: S4-20000 5500-2500-LD Press Force: 2,000 tons Itodpfjx Idt Djx Aansr Stroke: 700 mm Strokes per minute: 8–24 1/min Ram Adjustment: 600 mm Side Opening: 3,100 x 2,700 mm Table Surface: 5,500 x 2,480 mm Ram Surface: 5,500 x 2,480 mm Height of Sliding Table: 600 mm Drawing Cushion: 1 unit Drawing Cushion Force: 1,500 kN Dimensions of Drawing Cushion: 850 x 1,260 mm Drawing Cushion Working Stroke: 250 mm NORDA Transfer Transfer Step: 0–1,250 mm Transfer Opening min. / max.: 1,000 – 2,500 mm Transfer Stroke: 0–280 mm Millutensil Coil Line Material Thickness: 0.6 – 2.0 mm Maximum Material Width: 1,600 mm Decoiler Capacity: 15 tons

Condition: new, New Transfer press line from min. 300t up to max. 3500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Ijdpfx Asf Rt Ubeanjtr

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 013531, An efficient and economical lamination process is realized with the SMARTLAM CHK hot-cold transfer press system (Twin Stack series). Iedpfsxwdmajx Aanstr The SMARTLAM CHK is a twin-stack system that offers higher efficiency and increased output compared to conventional single-stack systems. By using two presses—one for heating and one for cooling—cycle times and energy consumption are significantly reduced. Depending on the material and laminate structure, up to 4 cycles per hour can be achieved with the SMARTLAM when processing 10 laminate layers per level. It is possible to place multiple laminates side by side in a single cassette. In alternative short-cycle test operation, approximately 1–2 cycles per minute can be achieved with one laminate layer per cassette (without vacuum and without a pressurized preheating phase).

Condition: good (used), Year of construction: 2005, Year of manufacture: 2005 Condition: functional Model:Schulze Air press x Double pneumatic transfer press, semi-automatic model. The print can be adjusted using an air gauge, which also ensures the same pressure regardless of the quality of the garment. Digital temperature and time control. Automatically opens when the transfer is finished. Bottom plates are available in different sizes. Iedpfxeudydgo Aanetr - Print size: 400 x 500 - Dimensions: 1.67 x 0.74 x 0.98 m - Weight (including packaging): 170 kg - Power: 10 A / 230 V - Temperature: max. 220 °C - Temperature accuracy: ± 0.5% - Power: 2.4 kW - Heating time: 12 min. at 180 °C - Timer range: max. 9 min., 59 sec. - Operating pressure: 2490 kg

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 2035, input voltage: 380 V, power: 4 kW (5.44 HP), Transfer punching machine SCHOREDER & BAUER HB 20 Power 20T per workstation (2x20 T) Number of strokes from 20-100 rpm Isdpfjw Tcglox Aanetr Year: 1989 Serial number: 2035 Kw 4 Weight approx. 3500 kg Complete documentation comes with the machine. The machine is in working condition. The costs of organizing a crane or forklift for loading the machine are charged separately.

Condition: good (used), Thrust 100 ton. Itsdoq N Et Nepfx Aanor Thrust points No. 2 110 mm stroke Slide adjustment 80 mm. Press tables 1,200 x 600 mm Lateral passage 460 m Hits per min. 40,180 Min. 460 mm Transfer DGM

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Isdpfor I E Itox Aanetr Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 2022438, type of input current: AC, power: 28 kW (38.07 HP), input voltage: 400 V, Equipment: documentation/manual, Monti Antonio 200 VSP-2250x1600 Thermal Press – As New Condition (Year of Manufacture: 2023) For sale is a nearly new Monti Antonio 200 VSP-2250x1600 thermal printing press (year of manufacture 2023, serial number 2022438). The system has been used exclusively for sublimation printing on blankets and is in perfect, fully operational condition. Technical specifications: Year of manufacture: 2023 Serial number: 2022438 Isdpfow Skhujx Aanstr Connected load: 28.7 kW Power supply: 400 V / 3~ / 50 Hz Working area: 2250 x 1600 mm Net weight: approx. 5,870 kg Condition: as new, fully functional Application options: Sublimation printing (textiles, blankets, large formats) Laminating, bonding Thermal transfer and finishing processes Also suitable for applications in advertising technology and industrial textile printing The machine is immediately available and can be inspected on site by appointment.

Condition: good (used), Year of construction: 2000, Thrust: 2000 TON. RATED CAPACIT Model: S4-2000.5000-2500-LD TYPE Year of construction: 2000 YEAR OF CONSTRUCTION Table size: 5,000 x 2,500 mm Isdevm Eirspfx Aanjtr TABLE DIMENSIONS Slide adjustment: 400 mm SLIDE ADJUSTMENT Strokes per min.: 10-16 c/min. CONTINUOUS SPEED (variable) Stroke: 800 mm SLIDE STROKE Mold clearance at BDC: 1,200 mm SHUT HEIGHT Hydraulic Safety: present Hydraulic Safety

Condition: good (used), Offer 23501 Gas transfer system with pressure reducer + separator Technical data approx: - Gas transfer system for nitrogen , argon , forming gas , hydrogen - from plasma cutting system + flame cutting system make ESAB Itjdpfx Aaerf Uqzoner - mounted on stainless steel plate as shown - div . pressure reducer + separator - Weight approx. 80 kg - Space requirement system approx. W 1.6 x H 1.5 x D 0.2 m

Condition: new, Year of construction: 2024, Hydraulic H Frame Press with movable Plate Capacity: 400 Ton Controll : by 2 Hand Bottom Main Cylinder : Ø 430mm. Auxilitary Cylinder : 2 pcs. Ø 110 x 55mm. Main Motor : 37kw. - 75hp. ( IE-3 ) Pumpe : 140cc. - 204LT BOSCH/REXROTH Speed: Down-140mm/sec. Working Speed13 - 5mm/sec Upspeed:150mm/sec Daylight : 1000mm Stroke: 700mm Movable Plate: 1500x1000mm Upper Plate : 1500x1000 Hydraulic: All the Hydraulic System will be top of the Machine Iodpfx Aopl Ugzsanetr Hydraulic System : BOSCH/REXROH Pressure & Speed Adjustment Side Cover doors Hydraulic Top Plate Lock system Mechanic Top Plate Lock System Automatic Lubrication System Oli Capacity : 1100 Lt Controller: Controller: SIEMENS S/7-1200 Electric Cabinet ( CE) Portable Control Panel Remote Connection System Security PLC Soft Starter Light Curtains on Front & Back Side Movable 2 Hand Control PLC Touch Screen: SIEMENS 12'' Working Area Ilimination 8 pcs free IN & OUT put-on PLC Movable Table: Stroke of the Movable Plate:1200mm Hydraulic Movement with external Motor and Pump Support Sliding System Table Paralelity: 0,05mm/ per m² All the Capacity,Dimentions and Options can be offered according to Customer Requirements Pls Contact us more Informations.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, total height: 5,000 mm, pressing force: 200 t, total length: 4,300 mm, installation height: 5,000 mm, total width: 2,250 mm, clearance between the columns: 1,000 mm, table length: 850 mm, operating pressure: 250 bar, spindle diameter: 400 mm, reverse speed: 567 mm/s, table width: 800 mm, year of last overhaul: 2018, overall weight: 16,800 kg, stroke length: 200 mm, space requirement length: 4,300 mm, space requirement height: 5,000 mm, Equipment: airbag, crane, Refurbished and Automated Mecolpress 200L Hot Forging Press (Siemens S7 Controlled) We are offering for sale our Mecolpress 200L fully automatic hot forging press system, which is currently operating in our production line. The machine underwent a comprehensive overhaul and modernization in 2018. The system has been upgraded to meet current production standards, including a renewed electrical system and a complete automation package. It is fully operational and immediately ready for production. Main Features and Benefits - Complete Overhaul: All mechanical and hydraulic components have been serviced, worn-out parts replaced, and the machine's performance restored to factory specifications, ensuring long-lasting and reliable operation. - Modernization (Siemens S7): The electrical system has been completely renewed with Siemens S7 PLC and latest-generation automation components, enabling precise control, easy fault detection, and modern production monitoring. - Fully Automatic Cell: All processes from furnace loading to forging and unloading are fully automated, minimizing human intervention and increasing productivity. - Complex Part Manufacturing: The 5-axis AP4 sub-press unit allows production of parts with complex internal geometries (such as valve bodies, Y-fittings, etc.) that cannot be manufactured with standard presses. - Production Ready: The machine is currently in active operation and will be delivered to the buyer with a custom die set (flange and 4 inserts). Technical Data - Pressing Force: 200 Tons - Strokes per Minute: 85 - Ram Stroke: 200 mm - Table Dimensions: 850 mm x 800 mm - Distance Between Columns: 1,000 mm - Pneumatic Cushion Force: 17.5 Tons - Total Weight: 16,800 kg - Main Motor Power: 25 HP Included Equipment The system is sold as a complete cell: - Mecolpress 200L Press (Refurbished, Siemens S7 controlled) - CP mod. 140-4P Heating Furnace (automatic loading conveyor, 4-guide system) - AP4 Sub-Press Unit (5th axis/angled punching capability) - Complete Rotary Automation System (loading arm, IR sensors, grippers, unloading spoon, lubrication system) - Custom Die Set (including flange and inserts as per your drawing) Since the machine is actively in production, it can be inspected by appointment and tested under working conditions. Itedpfox E Untjx Aaner

Condition: good (used), Proofing press 55x65cm Antique The machine is in very good condition, can be used as an exhibit or as a printing machine. Max. format 550×650 mm Weight 650 kg Flow table, system of claws holding the sheet. Electrically driven spreading roller. Itodpsu Umaiofx Aaner

Condition: excellent (used), Through-feed press for laminated wood Baioni Press Shelf length: 3000 mm Shelf width: 1300 mm Iedsx Afvmepfx Aanotr Shelf heating via high-frequency generator CE certificate

Condition: good (used), Letterpress printing press, foot operated Made in Germany Itjdpfovac S Djx Aanor Fully original machine. A brilliant looking exhibit to put in a company lobby. A manually added piston. Rollers Format of the pressure 35x24cm

Condition: good (used), Bookbinding screw press 50×40 on a base The device is fully functional, ready to work. Format 500×400 mm Itodpfx Aajwud Saensr Pressure 5t

Condition: good (used), Columbian Press 1858 Letterpress Manufactured in Great Britain by Henry Watts Year of manufacture 1858. Can be used as a work machine or as a museum exhibit. Iodpfx Aovbb Slsanstr