Used Anvil Substructure for sale (272)

Condition: new, first registration: 07/2012, fuel type: diesel, color: red, driver cabin: other, gearing type: other, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 2,560 mm, Year of construction: 2012, Vehicle location: Bovenden, aluminum body, tarpaulin and spreader bars, lashing eyes. Body: flatbed / tarpaulin, LIKE NEW! Like-new flatbed body from a trade show vehicle, suitable for a frame track of 834 mm, high-strength subframe with a height of 300 mm, crossmember spacing of 375 mm, enclosed with a flatbed outer frame all around, foldable lashing rings with a load capacity of 2500 daN, certified according to DIN 12640, embedded and welded into the outer frame at a spacing of 400 mm. Side board height 600 mm, front wall height 2000 mm, 30 mm thick screen-printed plywood floor, tarpaulin frame in 3 parts, clear side height approx. 2600 mm, 2 lifting points for forklifts in the substructure. Dismounted from a D-Benz Antos 2543L 6x2 with a wheelbase of 4000 mm. New price approx. 16,000 EUR! Lhjdoi Rnq Ajpfx Ag Aok Also available: 30 more interchangeable bodies for 1,000 to 5,900 EUR! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, mileage: 1,001 km, first registration: 01/2014, color: white, driver cabin: other, gearing type: other, loading space length: 7,300 mm, loading space width: 2,490 mm, loading space height: 2,180 mm, Year of construction: 2014, Vehicle location: Bovenden. Features: doors, swing-out side panels. Lhsdpfx Agji Rnvcj Aek Body: Orten beverage transport body, Kettliner-Light type, with load securing system. Floor made of approximately 27mm thick screen-printed laminated panels, front wall made of aluminum profiles, double-wing rear doors made of aluminum, substructure in steel lightweight construction, sliding rear load securing system allsafe-Jungfalk "CRS", attachment device for a forklift that can be carried on board, lateral loading height approximately 2180mm. Removal of Scania R450 LB 6x2-4 with 4700mm wheelbase! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, color: white, driver cabin: other, gearing type: other, loading space volume: 10 m³, loading space length: 5,200 mm, loading space width: 2,420 mm, loading space height: 800 mm, Year of construction: 2024, Vehicle location: Bovenden, lashing eyes, swing tailgates Body: PAVIC 3-way tipping body with aluminum side walls and pneumatic side and rear wall opening. Substructure made of solid welded steel construction, two longitudinal members with cross members to accommodate the 5 mm thick tipper profile and the 4 mm Hardox or Naxtra base plate. A 1,000 mm high fixed steel bulkhead with two round eyelets in the inner area, halfway out at the top. Fixed corner stanchions with bottom locks. The rear and side walls (one-piece over the entire length) are made of hollow aluminum profiles. The side walls are foldable and swing with a side wall lifting aid. The tailgate is also foldable and swing-mounted, with central locking in the tipper profile. 4 mm thick Hardox or Naxtra floor plate, neatly welded to the tipper profile and the longitudinal and cross members. The press beam and tipping boom are embedded in the longitudinal members and reinforced accordingly. Lashing eyes (4 per side) are located on the outside of the tipper floor, distributed along the length. The subframe is galvanized! Disassembly of a new MAN TGS 28.400 6x4-4 BL with a crane behind the cab and a 3600 mm wheelbase! ACCESSORIES INFORMATION IS PROVIDED WITHOUT GUARANTEE. Subject to change, prior sale, and errors! Lodsv Tp Hujpfx Ag Ashk - .

Condition: used, mileage: 1,001 km, first registration: 01/2015, color: yellow, driver cabin: other, gearing type: other, loading space volume: 36 m³, loading space length: 6,030 mm, loading space width: 2,430 mm, loading space height: 2,460 mm, Year of construction: 2015, Vehicle location: Bovenden, doors, lashing rails, light roof Body: Young box body with double wing door, galvanized substructure, galvanized subframe and cross beams, dismantling of Daimler-Benz Atego 816 4x2 with wheelbase 4220mm! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Lhodpfx Aevhh Rusg Ajk - .

Condition: used, mileage: 1,001 km, first registration: 01/2014, color: white, driver cabin: other, gearing type: other, loading space length: 7,300 mm, loading space width: 2,490 mm, loading space height: 2,180 mm, Year of construction: 2014, Vehicle location: Bovenden. Features: doors, swing-out side panels. Lodpfxoi Rmf Ds Ag Aohk Body: Orten beverage transport body, Kettliner-Light type, with load securing system. Floor made of approximately 27mm thick screen-printed laminated panels, front wall made of aluminum profiles, double-wing rear doors made of aluminum, substructure in steel lightweight construction, sliding rear load securing system allsafe-Jungfalk "CRS", attachment device for a forklift that can be carried on board, lateral loading height approximately 2180mm. Removal of Scania R450 LB 6x2-4 with 4700mm wheelbase! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, Workbench vice, parallel vice LEINEN with dovetail guide and height adjustment. Model: 125. Jaw width: 125 mm. Jaw height: 23 mm. Clamping range: max. 200 mm. Overall height: 550 to 750 mm. - 360° rotatable. - Dovetail guide. - Anvil surface for light straightening work. - Approx. 200 mm height adjustment without lift system. Weight: 44.5 kg. Good condition. Lodpsy E T Dyjfx Ag Aohk

Condition: new, power: 212 kW (288.24 HP), fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 2,640 mm, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Year of construction: 2025, Equipment: ABS, air conditioning, Equipment: - Extended day cab - Translucent sun visor - Halogen headlights with dual reflectors and impact-resistant Lexan lens covers - Bumper-mounted fog lights - Green-tinted windows - Mirror arms suitable for body widths 2.50–2.60 m - Central locking system - Adjustable roof spoiler - Long side fenders - Cab color: H3275WHTE - Headlight surround and bumper color: Stone Grey - Roof spoiler in cab color - Side fender color: cab color - Chassis color: grey - Air-suspended luxury driver's seat - Armrest on driver's seat - Fixed co-driver's seat - Engine tunnel storage compartment - Manually operated air conditioning with recirculation function - Manually operated roof hatch - ECAS remote control - 10-year subscription to PACCAR Connect Lhedpsyqdkaefx Ag Ask - Digital (intelligent) tachograph VDO DTCO - DAF infotainment system - Combined antenna for AM/FM, GSM, and GPS - DAF Drowsiness Detection - Lane departure warning system - Electronic Vehicle Stability Control (VSC) - Acoustic reversing warning system - Hill start assist - Safety system alerting the driver to moving objects on the passenger side - Front axle type F60, parabolic suspension - Front axle: tire size 285/70R19.5, wheel size 19.5 x 7.50 - Driven rear axle(s): tire size 285/70R19.5, wheel size 19.5 x 7.50 - Supplier: Goodyear - Tire pressure monitoring - Steel disc wheels, silver-grey - Wheel trims without center part, silver-grey (RAL 9006) - Front axle: tire size 285/70R19.5, Goodyear type KMAXS2 - Driven rear axle: tire size 285/70R19.5, Goodyear type KMAXD2 - Engine PX-7, 6-cylinder diesel engine - Emissions standard Euro 6 - Idle shutdown system after 5 minutes idling - PowerLine automatic transmission, 8 speeds - PowerLine 8AP1200 automated transmission, ratio 4.89–0.64, 8 speeds - Automated gearbox control software - Rear axle ratio 4.63 - Driven rear axle with mechanical differential lock - ASR (traction control) system - Exhaust brake - Parking brake control with test position - Wheelbase 5.60 m / rear overhang 2.40 m - Longitudinal frame height 270 mm, thickness 6.0 mm. No inner reinforcement. - Plastic fuel tank, 200 liters - AdBlue® tank 30 liters - Wheel chock - Towing cross-member, D-value 85 kN, Dc-value 70 kN, V-value 25 kN. Trailer coupling D-value 85 kN. - Pneumatic connection for trailer with rotary couplings - Electrical connection for trailer (24 V) with two 7-pin sockets. An additional 7-pin socket for connecting the EBS system of the trailer/semitrailer - LED side marker lights - Body mounting BAM 1 - Alternator 100 A, batteries 2 x 175 Ah - Water separator with 30-micron filter and heating - Air intake at the top, behind the cab - Warranty Plus - Driveline warranty Platform body, internal length 7280 mm with Palfinger tail lift C 1500 ML pro BODY: - Platform body - Rear portal with top-hinged tailgate Body dimensions: - External length: approx. 7295 mm - Internal length: approx. 7280 mm - External width: approx. 2550 mm - Internal width: approx. 2480 mm - Internal height: approx. 2640 mm - Side loading height: approx. 2600 mm - Rear frame opening: approx. 2450 mm wide x approx. 2560 mm high - Substructure with longitudinal and cross members of galvanized steel - Floor thickness nominal 24 mm - Anti-slip phenolic coated floor - Drop sides of aluminum, height 500 mm - Galvanized outer frame with 13 lashing rings per side - Front wall of plywood, height 1,800 mm - 1 fixed aluminum board above the front wall - Front wall impact protection from 12 mm phenolic plywood, 1,180

Condition: new, Year of construction: 2024, functionality: fully functional, total length: 2,900 mm, total width: 620 mm, total height: 1,500 mm, for approx. 100 E2 crates/hour incl. crate turner (single-person operation) System layout: 1. Zone – Main washing zone: – with a centrifugal pump with 2.2 kW (900 l/min at approx. 1 bar) distributed over a total of 50 stainless steel nozzles, which enable thorough cleaning of all 4 sides. A plate filter continuously cleans the washing solution and filters it continuously. – Tank volume 180 l – Washing temperature in the main washing zone 50-55°C The crate transport takes place via a spiral (KITZINGER utility model), which ensures precise crate separation and an unobstructed impact of the washing solution for comprehensive cleaning of all sides. 2. Zone – Rinsing area: – The products cleaned in the machine are thoroughly rinsed from all sides with fresh water. The fresh water must be at least 45°C when fed to the machine and is heated to approx. 80°C in the system. Approximately 250-300 l are required per hour. Technical data: – Overall length of the base machine: 2000 mm – with crate turner: 2500 mm – with crate turner and discharge table: 2900 mm – Machine width: 620 mm Lhedpfoza Dvusx Ag Aek – Machine height: 1500 mm – Washing tunnel passage width: up to 430 mm (adjustable) – Washing tunnel passage height: 330 mm – Total heating power: boiler 1 x 10 kW – Pump power: 2.2 kW, 900 l/min at 1 bar – The housing is completely welded and consists entirely of stainless steel. The substructure is largely made of 3 mm sheet metal and is therefore very durable. The machine has the following connections: – Fresh water at least 45°C, 3/4″, – Flow pressure at least 1, max. 6 bar via hose connection, – Consumption approx. 300 l/h, IMPORTANT: the machine requires warm fresh water, connection 1/2″ or 3/4″ – Electricity 14 kW, 400 V, 50 Hz, 32A fuse – Wastewater DN 40 to floor drain or channel near the machine, below the machine tank with standpipe – with main switch – powerful centrifugal pump – system on stainless steel rollers – sloping discharge side for returning water to the bottom of the crates

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 995 € 1200 x 800 mm 150 kg 16 mm THIS MODEL IS DESIGNED FOR BEGINNERS AND FOR PROCESSING LIGHTER AND SMALLER WORKPIECES. Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern. 2D standard welding and clamping table, 1200 x 1200 with Cr75M+ hard chrome plating Table system: 16 mm Material thickness: 12 mm Including table substructure and standard table legs Lsdpfx Aeyq Sugsg Aehk * S355J2+N with Cr75M+ hard chrome plating * Hole: 16 mm, material thickness: 12 mm * Including coated table substructure * Table top with 2-sided fine scaling and 50 x 50 mm grid line * Rounded edges and holes * Solid standard table legs with load capacity 1 tonne per leg; 500 kg per leg for castor model

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: Lsdjmhhy Nepfx Ag Ajhk - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Year of construction: 2012, condition: like new (used), machine/vehicle number: W111, Steel crane track suspension crane circular track 3x250Kg chain hoist crane Ideal for car washes, electroplating, etc Circle dimensions 6x2.3m (curved HEB140 beams) + Power rails / power supply Lhodsi Ammyepfx Ag Ajk + 2x 12m substructure HEA 180 + wall brackets + 3x 250Kg chain hoists - electrically movable - trolley travel and lift (approx. 4m) Each chain hoist can be controlled independently of one another Crane is dismantled, packed and immediately available New condition Collection by appointment in 75053 Gondelsheim Forklift is available for loading Shipping by forwarding agency possible, please inquire with zip code

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, product width (max.): 433 mm, working width: 430 mm, • 8 UV printing units • 2 rotary top loading die-cutting units • Waste shaft with additional pressure roller • GEW UV curing system • 2 additional hot air curing units • Sensotec printing register system • Insetting system • Cooled anvil drums • 2 rail-mounted cold foiling or laminating sections with interchangeable positions Ljdeymr Sqjpfx Ag Aohk • Aditional Oil-heated rotary Hot-foil unit • Belt Conveyor for sheet output • Automatic sheet collection and stacking table/elevator • Splise recognition sensor • Web breakage sensor • End of the roll sensor • Erhardt+Leimer Web guiding system • TekNek web cleaning unit • Slitting knives • Rotary Embossing Cylinder 31 anilox roller 550 aluminium printing cylinders 13 magnetic cylinders 3 cross cutting cylinders

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Holp Profil Bucket / PL.140.170 / MS10 / 1,700 mm cutting width / HARDOX / NEW / in stock & immediately available Lhodpfxoy T Uvgs Ag Ask Price: €4,970.00 net / €5,914.30 gross - Excavator up to: 16 tons - Weight approx.: 605 kg - SAE capacity: 686 liters - Cutting width: 1,700 mm - Back width: 1,100 mm - Bucket made entirely of HARDOX (not just the cutting edge) Advantages of the Holp Profil Bucket: - No damage when rotating the bucket due to the beveled corners - Optimal design due to numerous edges - Stable substructure - Minimal weight due to optimized design - Perfect material flow in the bucket - Advanced bucket floor for optimal filling - Stable cutting edge made of Hardox 450 When precision is required, the Profil Bucket provides the right finish in a workflow: No other bucket models and profiles more precisely and achieves comparable efficiency in processing your orders than this specially developed bucket. We have a very large selection of various Holp products in our warehouse, which are immediately available! Please contact us for this at [phone number] / [email address]. Upon request, we will also be happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official Magni telescopic loader sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Holp range! Errors and prior sale are subject to change! = Further information = New: Yes Intended use: Construction Unladen weight: 605 kg Please contact Marius Herden for further information.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (by phone at any time). Holp Profile Bucket / PL.120.150 / OQ60-5 / 1,500 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €3,605.00 net / €4,289.95 gross - Excavators up to: 12 tons - Own weight approx.: 450 kg - SAE capacity: 540 liters - Cutting width: 1,500 mm - Back width: 900 mm - Bucket made entirely of HARDOX (not just the cutting edge) Advantages of the Holp Profile Bucket: - No damage when rotating the bucket due to the beveled corners - Optimal design through numerous edges - Stable substructure - Minimal weight due to optimized design - Perfect material flow in the bucket - Advanced bucket bottom for optimal filling - Stable cutting edge made of Hardox 450 When precision is required, the profile bucket delivers the right result in a single workflow: No other bucket models and profiles more precisely and provides comparable efficiency in the processing of your orders than this specially designed bucket. We have a very large selection of various Holp products in our warehouse, which are immediately available! Please contact us for this at / . If desired, we will also gladly provide you with a financing offer. We are an official Holp sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale excepted! = Further information = New: Yes Intended use: Construction Unladen weight: 450 kg Lhodoy T Uvajpfx Ag Ajk Please contact Marius Herden for further information.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Holp Profile Bucket / PL.080.140 / OQ45-5 / 1,400 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €2,630.00 net / €3,129.70 gross - Excavator up to: 10 tons - Weight approx.: 305 kg - SAE capacity: 393 liters - Cutting width: 1,400 mm - Back width: 800 mm - Bucket made entirely of HARDOX (not just the cutting edge) Advantages of the Holp Profile Bucket: - No damage when rotating the bucket due to the beveled corners - Optimal design due to numerous edges - Stable substructure - Minimal weight due to optimized design - Perfect material flow in the bucket - Advanced bucket floor for optimal filling - Stable cutting edge made of Hardox 450 When precision is required, the profile bucket provides the perfect finishing touch in a workflow: No other bucket models and profiles as precisely and brings comparable efficiency to the processing of your orders as this specially designed bucket. We have a very large selection of various Holp products in our warehouse that are immediately available! Please contact us at [phone number] for more information. Upon request, we will also be happy to provide you with a financing offer. We are the official Holp sales and service partner. We are the official Magni telescopic loader sales and service partner. We are the official Gierking GMT sales and service partner. We are the official OilQuick sales and service partner. We are the official Weber MT sales and service partner. Ljdpfx Aey T Uuvjg Aehk We are the official Westtech sales and service partner. We are the official DMS sales and service partner. We are the official Seppi M. sales and service partner. We are the official JCB construction machinery sales and service partner. We are the official Mercedes-Benz sales and service partner. We are the official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale excepted! = Further information = New: Yes Intended use: Construction Empty weight: 305 kg Please contact Marius Herden for further information.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Holp Profile Bucket / PL.080.140 / MS08 / 1,400 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €2,500.00 net / €2,975.00 gross - Excavator up to: 10 tons - Weight approx.: 305 kg - SAE capacity: 393 liters - Cutting width: 1,400 mm - Back width: 800 mm - Bucket made entirely of HARDOX (not just the cutting edge) Advantages of the Holp Profile Bucket: - No damage when rotating the bucket due to the beveled corners - Optimal design due to numerous edges - Stable substructure - Minimal weight due to optimized design - Perfect material flow in the bucket - Advanced bucket floor for optimal filling - Stable cutting edge made of Hardox 450 When precision is required, the profile bucket delivers the perfect result in a single workflow: No other bucket models and profiles more precisely and achieves comparable efficiency in the processing of your orders than this specially designed bucket. We have a very large selection of various Holp products in our warehouse, which are immediately available! Lhjdpoy T Uupefx Ag Aok Please contact us at [phone number] or [email address] for this. Upon request, we will also be happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sales excepted! = Further information = New: Yes Intended use: Construction Unladen weight: 305 kg Please contact Marius Herden for further information.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (max.): 36,000 rpm, spindle speed (min.): 12,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) Ledpfex S Etmjx Ag Ashk - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: new, functionality: fully functional, Year of construction: 2026, Vertical Shaft Impact Crushers (VSI) stand out among rock crushing machines due to their high crushing efficiency and excellent particle shape production. Developed by CONSTMACH, these sand-making machines are used in the tertiary crushing stage to give cubic form to materials obtained from secondary crushers and to produce a high proportion of fine material. The system offers superior performance in processing all types of minerals and ores, as well as hard rocks such as basalt and granite. High-quality sand is produced from materials with a maximum feed size of 45 mm. Vertical shaft impact crushers allow you to easily obtain the desired product size for different material types thanks to their variable speed rotor system. It offers production capacity flexibility with a high reduction ratio, large feed hopper, and four different crushing chambers. In addition, high-chromium wheel shoes, anvils, and heavy-duty bearings ensure long life and low maintenance costs. The independent lubrication system and optional anvil replacement mechanism maximize uptime. Vertical Shaft Impact Crusher Technical Specifications Model: VSI-700-CR Maximum Feed Size: 35 mm Weight: 6,500 kg Motor Power: 110 kW Rotor Diameter: Ø700 mm Rotor Speed: 60–70 m/s Production Capacity: 60–100 t/h Model: VSI-800-CR Maximum Feed Size: 40 mm Weight: 12,000 kg Motor Power: 2 x 160 kW Rotor Diameter: Ø800 mm Rotor Speed: 45–60 m/s Production Capacity: 150–200 t/h Model: VSI-900-CR Maximum Feed Size: 45 mm Weight: 14,500 kg Motor Power: 2 x 185 kW Rotor Diameter: Ø900 mm Rotor Speed: 50–60 m/s Production Capacity: 200–250 t/h Model: VSI-1000-OR Maximum Feed Size: 90 mm Weight: 15,000 kg Motor Power: 2 x 200 kW Rotor Diameter: Ø975 mm Rotor Speed: 50–60 m/s Production Capacity: 250–300 t/h Why Choose CONSTMACH Vertical Shaft Impact Crushers? Lhedpoxqgyvjfx Ag Aek CONSTMACH is a globally preferred brand in the production of stone crushing machines and sand making machines with its engineering quality. Our vertical shaft impact crushers offer high performance, low operating costs, and long-lasting use. Our models, which can be customized to the production needs of each facility, provide the advantages of easy maintenance and high efficiency. CONSTMACH is always the right choice for businesses seeking quality, reliability, and sustainable production. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, Vertical Shaft Impact Crushers (VSI) stand out among rock crushing machines due to their high crushing efficiency and excellent particle shape production. Developed by CONSTMACH, these sand-making machines are used in the tertiary crushing stage to give cubic form to materials obtained from secondary crushers and to produce a high proportion of fine material. The system offers superior performance in processing all types of minerals and ores, as well as hard rocks such as basalt and granite. High-quality sand is produced from materials with a maximum feed size of 45 mm. Vertical shaft impact crushers allow you to easily obtain the desired product size for different material types thanks to their variable speed rotor system. It offers production capacity flexibility with a high reduction ratio, large feed hopper, and four different crushing chambers. In addition, high-chromium wheel shoes, anvils, and heavy-duty bearings ensure long life and low maintenance costs. The independent lubrication system and optional anvil replacement mechanism maximize uptime. Vertical Shaft Impact Crusher Technical Specifications Model: VSI-700-CR Maximum Feed Size: 35 mm Weight: 6,500 kg Motor Power: 110 kW Rotor Diameter: Ø700 mm Lhedexqf Uropfx Ag Aek Rotor Speed: 60–70 m/s Production Capacity: 60–100 t/h Model: VSI-800-CR Maximum Feed Size: 40 mm Weight: 12,000 kg Motor Power: 2 x 160 kW Rotor Diameter: Ø800 mm Rotor Speed: 45–60 m/s Production Capacity: 150–200 t/h Model: VSI-900-CR Maximum Feed Size: 45 mm Weight: 14,500 kg Motor Power: 2 x 185 kW Rotor Diameter: Ø900 mm Rotor Speed: 50–60 m/s Production Capacity: 200–250 t/h Model: VSI-1000-OR Maximum Feed Size: 90 mm Weight: 15,000 kg Motor Power: 2 x 200 kW Rotor Diameter: Ø975 mm Rotor Speed: 50–60 m/s Production Capacity: 250–300 t/h Why Choose CONSTMACH Vertical Shaft Impact Crushers? CONSTMACH is a globally preferred brand in the production of stone crushing machines and sand making machines with its engineering quality. Our vertical shaft impact crushers offer high performance, low operating costs, and long-lasting use. Our models, which can be customized to the production needs of each facility, provide the advantages of easy maintenance and high efficiency. CONSTMACH is always the right choice for businesses seeking quality, reliability, and sustainable production. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, Year of construction: 2025, Marking hero EXKLUSIV XL Industry 4.0 - Model 2025 Ljdpfxswga Hws Ag Ajhk Metal - plastics and much more! - EZCAD 3 (real 64bit card) with up to 4 axes - Windows Professional 64bit suitable - Professional MOPA fibre laser source JPT with 20 Watt power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for colour marking) - ‘DigiScan Eco 10’ scanner unit for detailed and precise results - T-slot plate from Isel for easy attachment and positioning of your workpiece - Sliding door at the front with large viewing window and certified laser safety screen made in Germany incl. monitoring -> Door opening 450 mm - Side sliding door on the left incl. monitoring for long parts -> door opening 400 mm - Clear control panel with Siemens buttons - Scan area approx. 100 x 100 mm (optional 150/200/300 mm) - Motorised height adjustment with focus finder - Stand housing made of aluminium profiles with two man. Doors for easy, user-friendly and safe marking Laser class 1 - Substructure of the stand housing with Rittal control cabinet and integrated extraction point - LED workspace lighting made in Germany - High-performance MiniPC with 32 GB - 21’ TFT touch screen for fatigue-free working - Professional marking software in German language - Barcode and QR code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder via matrix over 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This enables the simple integration of external components such as camera position detection etc. - Industry 4.0 The status can be processed at any time via the TCP/IP protocol - Inputs and outputs for automation - 3D preview for rotary axis machining - Performance increase of up to 50% thanks to 64-bit technology - Improved stability - Optional up to 4 axis control WITHOUT switching via PLUGins - Optional DEEP engraving (slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching - Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with 2-fold laser pointer for visual checking of the focus position - Connection option for external suction - Software suitable for Windows 10 - USB cable for connecting to the computer - Operating instructions and operating software in german and english Among other things, we offer the following options: =ᐳ IPG or SPI fibre laser sources in various powers =Scanlab equipment =Suitable extraction systems =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking function =ᐳ Automatic focus adjustment via special laser sensor =ᐳ Rotary unit in various versions =ᐳ Motorised slides in X and Y =ᐳ Interlock system for labelling WITHOUT protective housing, but only with personal protective equipment for bulky parts incl. training in Schweinfurt! Our engraving lasers are manufactured at our factory in Schweinfurt! Individual requests are therefore possible at any time! =ᐳ Made in Schweinfurt! Images may contain options! We are your partner for laser markers. Whether manual or automatic laser labelling system. We will be happy to make you an offer.

Condition: new, Year of construction: 2025, Marking hero EXKLUSIV XL Industry 4.0 - Model 2025 Metal - plastics and much more! - EZCAD 3 (real 64bit card) with up to 4 axes - Windows Professional 64bit suitable - Professional MOPA fibre laser source JPT with 20 Watt power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for colour marking) - ‘DigiScan Eco 10’ scanner unit for detailed and precise results - T-slot plate from Isel for easy attachment and positioning of your workpiece - Sliding door at the front with large viewing window and certified laser safety screen made in Germany incl. monitoring -> Door opening 450 mm - Side sliding door on the left incl. monitoring for long parts -> door opening 400 mm - Clear control panel with Siemens buttons - Scan area approx. 100 x 100 mm (optional 150/200/300 mm) - Motorised height adjustment with focus finder - Stand housing made of aluminium profiles with two man. Doors for easy, user-friendly and safe marking Laser class 1 - Substructure of the stand housing with Rittal control cabinet and integrated extraction point - LED workspace lighting made in Germany - High-performance MiniPC with 32 GB - 21’ TFT touch screen for fatigue-free working - Professional marking software in German language - Barcode and QR code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder via matrix over 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This enables the simple integration of external components such as camera position detection etc. - Industry 4.0 The status can be processed at any time via the TCP/IP protocol - Inputs and outputs for automation - 3D preview for rotary axis machining - Performance increase of up to 50% thanks to 64-bit technology - Improved stability - Optional up to 4 axis control WITHOUT switching via PLUGins - Optional DEEP engraving (slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching - Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with 2-fold laser pointer for visual checking of the focus position - Connection option for external suction - Software suitable for Windows 10 - USB cable for connecting to the computer - Operating instructions and operating software in german and english Among other things, we offer the following options: =ᐳ IPG or SPI fibre laser sources in various powers =Scanlab equipment =Suitable extraction systems =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking function =ᐳ Automatic focus adjustment via special laser sensor =ᐳ Rotary unit in various versions =ᐳ Motorised slides in X and Y =ᐳ Interlock system for labelling WITHOUT protective housing, but only with personal protective equipment for bulky parts incl. training in Schweinfurt! Our engraving lasers are manufactured at our factory in Schweinfurt! Individual requests are therefore possible at any time! =ᐳ Made in Schweinfurt! Images may contain options! Lhjdpfx Aowgaqpsg Aek We are your partner for laser markers. Whether manual or automatic laser labelling system. We will be happy to make you an offer.

Condition: new, Year of construction: 2025, Marking hero EXKLUSIV XL Industry 4.0 - Model 2025 Metal - plastics and much more! - EZCAD 3 (real 64bit card) with up to 4 axes - Windows Professional 64bit suitable - Professional MOPA fibre laser source JPT with 20 Watt power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for colour marking) - ‘DigiScan Eco 10’ scanner unit for detailed and precise results - T-slot plate from Isel for easy attachment and positioning of your workpiece - Sliding door at the front with large viewing window and certified laser safety screen made in Germany incl. monitoring Lsdpfxjwga Etj Ag Aohk -> Door opening 450 mm - Side sliding door on the left incl. monitoring for long parts -> door opening 400 mm - Clear control panel with Siemens buttons - Scan area approx. 100 x 100 mm (optional 150/200/300 mm) - Motorised height adjustment with focus finder - Stand housing made of aluminium profiles with two man. Doors for easy, user-friendly and safe marking Laser class 1 - Substructure of the stand housing with Rittal control cabinet and integrated extraction point - LED workspace lighting made in Germany - High-performance MiniPC with 32 GB - 21’ TFT touch screen for fatigue-free working - Professional marking software in German language - Barcode and QR code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder via matrix over 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This enables the simple integration of external components such as camera position detection etc. - Industry 4.0 The status can be processed at any time via the TCP/IP protocol - Inputs and outputs for automation - 3D preview for rotary axis machining - Performance increase of up to 50% thanks to 64-bit technology - Improved stability - Optional up to 4 axis control WITHOUT switching via PLUGins - Optional DEEP engraving (slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching - Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with 2-fold laser pointer for visual checking of the focus position - Connection option for external suction - Software suitable for Windows 10 - USB cable for connecting to the computer - Operating instructions and operating software in german and english Among other things, we offer the following options: =ᐳ IPG or SPI fibre laser sources in various powers =Scanlab equipment =Suitable extraction systems =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking function =ᐳ Automatic focus adjustment via special laser sensor =ᐳ Rotary unit in various versions =ᐳ Motorised slides in X and Y =ᐳ Interlock system for labelling WITHOUT protective housing, but only with personal protective equipment for bulky parts incl. training in Schweinfurt! Our engraving lasers are manufactured at our factory in Schweinfurt! Individual requests are therefore possible at any time! =ᐳ Made in Schweinfurt! Images may contain options! We are your partner for laser markers. Whether manual or automatic laser labelling system. We will be happy to make you an offer.

Condition: used, Measuring and marking plate, made of cast steel/grey cast iron, heavily ribbed with mounting angle made of steel, 565 mm high Year of manufacture approx. 1985 Length: 1200 mm Width: 800 mm Thickness: 35/150 mm Working height: 1030 mm Weight approx. 550 kg - The mounting angle is a steel plate screwed onto the table top - simple metal substructure very good surface Lsdpfjdzp Srjx Ag Aehk

Condition: used, Alignment and welding plate, cast steel – grey cast iron, heavily ribbed formerly a layout plate and measuring plate heavy-duty alignment plate Length: 1000 mm Width: 800 mm Thickness: 250 mm Working height: 820 mm Lhjdpfx Aodzqrpog Ajk Plate thickness: 30 mm, continuous - height-adjustable metal substructure Weight: approx. 400 kg Surface: rusted

Condition: used, Straightening and welding plate, steel and grey cast iron, heavily ribbed Heavy-duty straightening plate Length: 2000 mm Width: 1500 mm Thickness: 125 mm Plate thickness: approx. 40 mm throughout Table height: 880 mm - Table substructure made of steel (custom-made) Weight: 1700 kg Good condition Lhjdpfxeqylk Us Ag Ask