Used Anvil Substructure for sale (271)

Condition: used, Technical details: weight of the machine approx.: 179 kg Dedpju Nkw Rjfx Addewf space requirements of the machine approx.: 0,75 x 0,335 x 0,340 m Use: for forging work Material cast steel Working surface LxW: 510 x 140mm Horn length: 225mm Ø 28 - Ø 110mm Mandrel square 28 x 28mm *

Condition: new, PTG - eccentric die 9 and 10 mm Ø, anvil 15°, clamping/equalising plates, Dodpfxspfaxue Addswf PMH - Anvil 15° and others, clamping/equalising plates 6°/4° and 8°/5° POR 40/42U - eccentric die 9.5 mm Ø, anvil 9.5 mm Ø

Condition: used, Counter bearing Make Cover Dwodoctd Rhspfx Addof Rail inside 92 mm outside 130 mm

Condition: good (used), Offer 21339 Technical data: - Total width approx. 740 mm Dwodpfx Adewp Hgisdof - Work surface length / track length approx. 510 mm - Work surface depth / track depth approx. 150 mm - Total depth approx. 330 mm - Round horn approx. 220 mm - Pass-through square hole in track approx. 27 mm - Anvil height approx. 380 mm - Wooden block B 650 x D 500 x H 450 mm - Weight anvil approx. 200 kg - Weight wooden block approx. 70 kg

Condition: new, functionality: fully functional, Year of construction: 2025, Aggregate and ballast crusher equipment are used in the crushing and processing of various materials for construction and infrastructure projects. These crushers are designed to break down large rocks, gravel, or stones into smaller pieces, producing aggregates and ballast that are essential components in the construction industry. Here are some key aspects related to aggregate and ballast crusher equipment: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing in aggregate and ballast production. They operate by compressing the material between a stationary and a movable jaw. 2. Impact Crusher: - Impact crushers are suitable for shaping and producing fine aggregates. They use impact force to crush the material, making them suitable for various types of rock and ore. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They are efficient for producing well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They use the "rock-on-rock" crushing principle, where rocks are fed into the rotor to be accelerated and crushed against the stationary anvils. 5. Gyratory Crusher: - Gyratory crushers are primarily used in mining, but they may also be used in the production of aggregates. They have a conical head and a concave surface, which crushes the material between the head and concave. 6. Mobile Crushers: - Mobile crushers, including mobile jaw crushers and mobile impact crushers, provide flexibility and mobility for on-site crushing of aggregates and ballast. They are often used in construction projects where materials need to be processed directly at the job site. 7. Screens and Scalpers: - Screens and scalpers are used to separate different sizes of aggregates after the initial crushing stage. Vibrating screens are commonly employed to classify and separate materials based on size. 8. Conveyors: - Conveyors are crucial for transporting materials between various stages of the crushing process and for stockpiling the final products. They enhance efficiency in material handling. 9. Dust Suppression Systems: Dwsdjq Nxrxepfx Addjf - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. These systems may include water sprays or chemical suppressants. 10. Quality Control: - Quality control measures, such as particle size analysis and gradation testing, are essential to ensure that the produced aggregates and ballast meet the required specifications and standards. 11. Environmental Considerations: - Crusher equipment should adhere to environmental regulations, and measures like dust control, noise reduction, and proper waste disposal should be implemented. When selecting aggregate and ballast crusher equipment, factors such as the type of material, required product size, production capacity, and mobility requirements should be taken into consideration. Additionally, adherence to safety and environmental standards is crucial in the operation of crushing equipment.

Condition: new, Year of construction: 2025, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked impact crusher FTI-130s is a complete mobile system which moves on hydraulicly driven tracked system with 1 km/h speed and combination of a vibrated grizzly feeder, an Impact crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationality of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines can not reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. Dwjdpfx Asx Dhl Hjddof TECHNICAL SPECIFICATIONS: Model: FTI-130s Production Capacity: 400-450 tons per hour Maximum Feeding: 500 mm Crusher Type: Impact Crusher SIZE: 1270x1200 mm CSS Setting: 0-50 mm Total Power: 500 kva Vibrating Screen: 1500x4200 mm Weight: 63 tons - Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), For sale: Mitutoyo micrometer set for external measurement in the range of 200–300 mm. Precise Japanese analog micrometer with an accuracy of 0.01 mm. The set includes everything shown in the photos. Dsdpfou S Slxox Addswf - Original Mitutoyo frame with lightweight construction - Measuring head with clear scale - Set of 4 measuring rods - 3 measuring anvils - Standards and adjustment tools - Multilingual user manual - Sturdy wooden case with foam insert Condition: The set is in like-new condition. All components are complete and well-maintained.

Condition: excellent (used), Year of construction: 1999, ARBURG 420C 800-250 with the sprue picker anvil+long leg Year of manufacture: 1999 injection unit: Screw diameter: 40 mm injection weight: 158 g injection pressure: 1390 bar Metering volume: 188 ccm Dwedpoxz Au Dofx Addsf Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 570x570 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Control with air valve Core pull control Injection unit hardened - bimetal Dimensions: Weight: 3180 kg length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, 2x Bilz FAEBI 430 + 2x Wedge Shoes – Rubber Air Springs / Machine Feet - 2x Wedge Shoes + Substructure - 2x Bilz FAEBI 430 Rubber Air Springs + Substructure - 9x Spacer Discs - The spring characteristics can be adjusted by regulating the air pressure - Wear-resistant, low-maintenance air damping, adjustable easily from the outside - No transmission of structure-borne noise Technical Data FAEBI 430 Rubber Air Spring: - Load capacity: 2750 – 6500 daN - Max pressure: 6 bar - Cushion height: approx. 90 mm - Cushion diameter: 480 mm - Base plate diameter: 315 mm Dodpfx Adexyx Dfedewf - Dimensions incl. substructure (LxWxH): 510 x 510 x 200 mm - Threaded rod: M20 / 180 mm Wedge Shoes: - Dimensions incl. substructure (LxWxH): 330 x 250 x 200 mm Spacer Discs: - Diameter: 470 mm - Thickness: 2x 4 mm / 2x 2 mm / 2x 1.5 mm / 3x 1 mm

Condition: new, power: 346 kW (470.43 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, loading space width: 2,480 mm, loading space length: 6,600 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number for customer inquiries: 1546 / IMMEDIATELY AVAILABLE ----Multiple units in stock! MAN TGX 26.470 construction material platform truck with PALFINGER PK 22002 EH or FASSI F235 loading crane, IMMEDIATELY AVAILABLE! PK 22002-EH – PALFINGER HIGH PERFORMANCE TRUCK-MOUNTED CRANE - Lifting moment: 205.0 kNm (20.9 mt) - Classification HC1 HD4/B3 according to EN12999 - Fast extension system with oil return and internal oil feed-through - Double knuckle with Power Link Plus 15° - Slewing mechanism with swing cylinders - Slewing range 400° Dodexnn Iiopfx Addewf - Electronic HPLS control unit (for two pressure ranges) - Individual outrigger control with unlockable check valves at the support cylinders - Spiral hose from base frame to main boom - Level indicator at both control stands - Available with 4-stage and 6-stage extension ex stock or Fassi F235 loading crane: * F235A.2. e-dynamic * Lifting capacity at 12.7 m: 1,345 kg or 17.1 m: 740 kg * Slewing range 400° * Double knuckle-boom system with PROLINK (overbending jib up to 15°) * Electronic overload cut-off system with FX500 * Fassi RCS radio remote control maxi – 6 functions with 3 joysticks (2-2-2) * Emergency stop and visual alarm (90% and 100%), including adjustable digital slewing limiter * FASSI stability control FSC including LMB II * Control unit for 2 auxiliary functions with 2 hose guides / e-dynamic * Available with 4-stage and 6-stage extension ex stock Superstructure: * Platform body: dimensions 6,600 x 2,480 x 1,000 mm * Sideboards: each side split once (2 drop-sides), with sideboard relief * Substructure: galvanized lattice frame * Perforated frame for optimal load securing * Toolbox Vehicle: * Flatbed platform with crane * Diesel engine MAN 02676 LFAI, 346 kW (470 HP), 2,400 Nm torque, Euro 6e * MAN TipMatic 12.26 DD automated gearbox with Retarder 35 * Retarder Eco, speed-dependent, multi-stage, energy efficient * MAN EVBec high performance engine brake, multi-stage * Protected disc brakes, suitable for off-road use * Drive 6x2-4 * Suspension type leaf/air (BL) * Main wheelbase 4,800 mm, wheelbase between rear and trailing axle 1,350 mm * Fuel tank volume 590 L, AdBlue tank volume 60 L * Trailing axle steerable and liftable * Trailer coupling RINGFEDER type 4040/G150B, 40 mm towing ring * GM cab: the spacious one (wide, long, medium height) * Mattress comfort bed, lower, 110 mm * Pull-out refrigerator and drawer * Driver comfort seat, air-sprung, with lumbar support and shoulder adjustment * Glass tilt roof, electric * LED lighting * MAN EasyControl operating panel, 4 functions, operable from outside with door open * MAN Media System Navigation Professional 12.3 inch * MAN Advanced sound system with subwoofer * Smartphone integration * MAN SmartSelect infotainment control with touchpad and direct access buttons * Lane departure warning LDW * Driver attention assist MAN AttentionGuard * Emergency brake assist EBA * Standard drivetrain warranty for the 3rd operational year up to 450,000 km, see maintenance certificate for details * And much more Financing / hire purchase, as well as leasing / partial amortization leasing, is possible with our leasing partner. For further questions, our sales team is at your disposal. This is a non-binding offer. Subject to prior sale, errors, and changes.

Condition: new, Year of construction: 2025, For crushing marble, sandstone, and quartzite, various types of crushers can be used depending on the properties of the raw materials and the desired final product specifications. Here are some common types of crushers that may be suitable for processing these materials: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing. They are robust machines that handle tough materials, making them suitable for breaking down hard and abrasive stones like marble and quartzite. 2. Impact Crusher: - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. Djdpfjq Nx Nnsx Addjwf 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder stones and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials like sandstone. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. 8. Crawler Mobile Crusher: - Mobile crushers offer flexibility and mobility, allowing them to be used directly at the quarry or job site. Crawler mobile crushers can handle various types of stones, including marble, sandstone, and quartzite. 9. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 10. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. When selecting a crusher for marble, sandstone, or quartzite, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Condition: new, functionality: fully functional, fuel type: hybrid, color: yellow, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked jaw crusher FTJ 11-75 is a complete mobile system which moves on hydraulically driven tracked system with 1 km/h speeds and combination of a vibrated grizzly feeder, 1070x760 mm jaw crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationally of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. All necessary equipment for the process is combined only single chassis and processing equipment is driven by electrical motors. Overall production capacity is 150-300 tph Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines cannot reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and the travel track units is highly economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: Dwjdpfx Adex A R I Iedsf -Model: FTJ 11-75 -Production Capacity: 150 – 300 tons per hour -Maximum Feeding: 700 mm -Crusher Type: Jaw Crusher -SIZE: 1070x760 mm -Generator: 300 kva -CSS Setting: 45 – 160 mm -Weight: 55000 tons -Dimensions: 2900x3500x14.500mm – Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly advantages. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, Year of construction: 2025, Vertical Shaft Impact Crushers (VSI) stand out among rock crushing machines due to their high crushing efficiency and excellent particle shape production. Developed by CONSTMACH, these sand-making machines are used in the tertiary crushing stage to give cubic form to materials obtained from secondary crushers and to produce a high proportion of fine material. The system offers superior performance in processing all types of minerals and ores, as well as hard rocks such as basalt and granite. High-quality sand is produced from materials with a maximum feed size of 45 mm. Vertical shaft impact crushers allow you to easily obtain the desired product size for different material types thanks to their variable speed rotor system. It offers production capacity flexibility with a high reduction ratio, large feed hopper, and four different crushing chambers. In addition, high-chromium wheel shoes, anvils, and heavy-duty bearings ensure long life and low maintenance costs. The independent lubrication system and optional anvil replacement mechanism maximize uptime. Vertical Shaft Impact Crusher Technical Specifications Model: VSI-700-CR Maximum Feed Size: 35 mm Weight: 6,500 kg Motor Power: 110 kW Rotor Diameter: Ø700 mm Rotor Speed: 60–70 m/s Production Capacity: 60–100 t/h Model: VSI-800-CR Maximum Feed Size: 40 mm Weight: 12,000 kg Motor Power: 2 x 160 kW Rotor Diameter: Ø800 mm Rotor Speed: 45–60 m/s Production Capacity: 150–200 t/h Model: VSI-900-CR Maximum Feed Size: 45 mm Weight: 14,500 kg Motor Power: 2 x 185 kW Rotor Diameter: Ø900 mm Rotor Speed: 50–60 m/s Dodjxp Saxopfx Addjwf Production Capacity: 200–250 t/h Model: VSI-1000-OR Maximum Feed Size: 90 mm Weight: 15,000 kg Motor Power: 2 x 200 kW Rotor Diameter: Ø975 mm Rotor Speed: 50–60 m/s Production Capacity: 250–300 t/h Why Choose CONSTMACH Vertical Shaft Impact Crushers? CONSTMACH is a globally preferred brand in the production of stone crushing machines and sand making machines with its engineering quality. Our vertical shaft impact crushers offer high performance, low operating costs, and long-lasting use. Our models, which can be customized to the production needs of each facility, provide the advantages of easy maintenance and high efficiency. CONSTMACH is always the right choice for businesses seeking quality, reliability, and sustainable production. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, maximum load weight: 13,200 kg, overall weight: 16,000 kg, first registration: 01/2006, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,520 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2006, Wagon No. G0119778_1 – Manufacturer: Kerex. * Portal door with simple rotary bar locks (external) * Suitable for forklift access * Fixed support legs * Equipment for rail loading * Lashing options * Partially with internal keyhole system Storage container—weatherproof, secure closure, floor in good condition, no further repairs required. Delivery: IMMEDIATE AVAILABILITY. Technically operational condition without need for further repair. Substructure shows signs of use, some rust present. Occasional paint flaking on components of the swap body. Isolated rust formation on components of the swap body. Deformations/impacts on components—see pictures. Dimensions are approximate. Offer is subject to prior sale; prices are net ex-works D-59302 Oelde. Further details upon request via telephone or email. Djdpfx Aoxy Edfoddjwf

Condition: new, - Solid cast iron body - Steel substructure - Hand and foot operation - Adjustable oiler - incl. upper and lower tool (flat dies) Technical data: - Capacity: 25 kg - Stroke rate: 250 / min - Lifting height: 250 mm Dsdpfx Adetr Dhmedjwf - Projection: 200 mm - Cylinder Ø: 125 mm - Working height: 850 mm - Motor power: 2.2 kW - Voltage: 400 V - Dimensions WxHxD: 570 x 1630 x 1310 mm - Weight: approx. 670 kg

Condition: new, power: 353 kW (479.95 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, loading space width: 2,420 mm, loading space length: 5,200 mm, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, soot filter, Internal number for customer inquiries: 5-060 ---- Ideal for low loader transport, etc.! Towing capacity 30,000 kg! MAN TGS 28.480 6x4-4 BL THREE-WAY TIPPER WITH FASSI F195 LOADER CRANE Loader Crane: * FASSI F195A.2.24 e-dynamic * Lifting moment 162 kNm (16.51 mt) * Hydraulic four-section extension 12.7 m * e-dynamic hose equipment for two auxiliary devices * Slewing range 400° Dwsdpfx Aoxnn Txjddjf * Double knuckle system with PROLINK (overbending knuckle arm up to 15°) * Electronic overload cut-off with FX 500 * FASSI stability control FSC incl. LMB II * Fassi RCS remote maxi – 6 functions with 3 joysticks (2-2-2) * Special outrigger system, outrigger width 6.64 m, hydraulically extendable incl. FSC * Outriggers operable via remote control * FL-System (Full Lift) switchable high-speed valve for extensions * LED work lights Vehicle: * Leaf/air suspension * Drive 6x4-4 * MAN D26 diesel engine, 480 HP, Euro 6e * MAN TipMatic automatic gearbox * MAN TipMatic operation, with steering-column lever, manual (DNR selection, shift strategy selection) * Front axle as hub reduction axle, driven, selectable * Trailing axle, 9,000 kg, non-driven, steered, liftable * Differential locks on driven rear axle + front axle * 3,600 mm main wheelbase, 1,400 mm wheelbase between rear axle and trailing axle * 310-litre fuel tank, 35-litre AdBlue tank * Digital axle load display (ALM) for air-suspended axles * Cab NN: the practical one (narrow, medium-length, standard height) * Sunblind for windscreen, inside, electric * Driver’s comfort seat, air-suspended, with lumbar support and shoulder adjustment * MAN EasyControl control panel, 2 functions, operable from outside when the door is open * MAN Mediasystem Navigation Professional 12.3 inch * Navigation map Europe and Russia * Online traffic for navigation function * Smartphone integration * MAN SmartSelect infotainment control with touchpad and direct access buttons * Standard driveline extended warranty for 3rd year of operation up to 450,000 km, conditions as per service record * And much more. Superstructure: Three-way tipper body with FASSI F195A.2.24 e-dynamic crane mounted directly behind the cab (crane with top features: radio remote control, hydraulic outriggers via radio operation, work lighting, etc.) Drop Side Platform: * Dimensions LxWxH 5,200 mm x 2,420 mm x 800 mm * (Alternative also available: load space length 4,800 mm x 2,420 mm x 800 mm) * Front wall 1,000 mm high Substructure: Robust steel welded construction, two longitudinal beams with cross members to support the 5 mm thick tipper profile and 5 mm floor plate made of Hardox or Naxtra. A fixed 1,000 mm high steel front wall with 2 lashing rings inside, positioned at each outer side at half height. Corner posts fixed, with lower locks. Rear and side walls (single piece over entire length) made of aluminium hollow profiles; side walls foldable and swinging with tailboard lift assist. Tailgate also foldable and swinging, centrally locked into the tipper profile. Floor plate made of Hardox or Naxtra, 4 mm thick, neatly welded to the tipper profile and longitudinal/cross members. Ram crosstube and tipper bracket set into the longitudinal members and accordingly reinforced. Lashing rings (4 per side) are mounted externally on the tipper floor, distributed along the length. Steel construction executed in St 52-3. All steel parts are sandblasted, body parts in RAL 9016.

Condition: new, functionality: fully functional, Year of construction: 2025, For crushing dolomite and phonolite rocks, various types of rock crushing machines can be employed, depending on the characteristics of the rocks and the desired final product specifications. Here are some common types of crushers that may be suitable for processing dolomite and phonolite: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing and can handle hard and abrasive materials. They are suitable for both dolomite and phonolite rocks. 2. Impact Crusher: - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder rocks and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. Dedpfoq Nyuvsx Addewf 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials and may be suitable for rocks like phonolite. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. 8. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. 10. Mobile Crushers: - Mobile crushers, including crawler mobile crushers, offer flexibility and mobility, allowing them to be used directly at the quarry or job site. When selecting a crusher for dolomite and phonolite rocks, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Condition: new, functionality: fully functional, fuel type: hybrid, color: yellow, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Djdpsx A R Hdefx Addowf Fabo tracked impact crusher FTI-110s is a complete mobile system which moves on hydraulicly driven tracked system with 1 km/h speed and combination of a vibrated grizzly feeder, an Impact crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationality of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. Advantages of Tracked Crushers; -Heavy-duty walking trackes can reach places where ordinary machines can not reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: Model: FTI-110s Production Capacity: 200-240 tons per hour Maximum Feeding: 500 mm Crusher Type: Impact Crusher SIZE: 1000x1000 mm CSS Setting: 0-50 mm Total Power: 360 kva Vibrating Screen: 1500x2700 mm Weight: 52 tons Dimensions: 2900x3180x14760mm - Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2025, functionality: fully functional, Vertical Shaft Impact Crushers (VSI) stand out among rock crushing machines due to their high crushing efficiency and excellent particle shape production. Developed by CONSTMACH, these sand-making machines are used in the tertiary crushing stage to give cubic form to materials obtained from secondary crushers and to produce a high proportion of fine material. The system offers superior performance in processing all types of minerals and ores, as well as hard rocks such as basalt and granite. High-quality sand is produced from materials with a maximum feed size of 45 mm. Vertical shaft impact crushers allow you to easily obtain the desired product size for different material types thanks to their variable speed rotor system. It offers production capacity flexibility with a high reduction ratio, large feed hopper, and four different crushing chambers. In addition, high-chromium wheel shoes, anvils, and heavy-duty bearings ensure long life and low maintenance costs. The independent lubrication system and optional anvil replacement mechanism maximize uptime. Vertical Shaft Impact Crusher Technical Specifications Model: VSI-700-CR Maximum Feed Size: 35 mm Dwjdpfexpvgpsx Addjf Weight: 6,500 kg Motor Power: 110 kW Rotor Diameter: Ø700 mm Rotor Speed: 60–70 m/s Production Capacity: 60–100 t/h Model: VSI-800-CR Maximum Feed Size: 40 mm Weight: 12,000 kg Motor Power: 2 x 160 kW Rotor Diameter: Ø800 mm Rotor Speed: 45–60 m/s Production Capacity: 150–200 t/h Model: VSI-900-CR Maximum Feed Size: 45 mm Weight: 14,500 kg Motor Power: 2 x 185 kW Rotor Diameter: Ø900 mm Rotor Speed: 50–60 m/s Production Capacity: 200–250 t/h Model: VSI-1000-OR Maximum Feed Size: 90 mm Weight: 15,000 kg Motor Power: 2 x 200 kW Rotor Diameter: Ø975 mm Rotor Speed: 50–60 m/s Production Capacity: 250–300 t/h Why Choose CONSTMACH Vertical Shaft Impact Crushers? CONSTMACH is a globally preferred brand in the production of stone crushing machines and sand making machines with its engineering quality. Our vertical shaft impact crushers offer high performance, low operating costs, and long-lasting use. Our models, which can be customized to the production needs of each facility, provide the advantages of easy maintenance and high efficiency. CONSTMACH is always the right choice for businesses seeking quality, reliability, and sustainable production. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance. Information: The prices listed in the advertisement are shared based on current information. However, due to changes in market conditions and supply processes, our prices may vary from time to time. Therefore, we recommend requesting a quote from us for accurate pricing information.

Condition: used, Year of construction: 1993, functionality: fully functional, conveyor belt length: 2,730 mm, conveyor belt width: 360 mm, conveyor belt speed: 50 mm/s, total length: 2,730 mm, total width: 490 mm, total height: 1,620 mm, power: 0.762 kW (1.04 HP), motor manufacturer: BONFIGLIOLI, Equipment: type plate available, TAF item number: 1000004806 Manufacturer: trio-technik Year of manufacture: 1993 Overall dimensions: 2,730 x 490 x 1,620 mm (LxWxH) Width including side panel: 490 mm Djdpfx Adjwgmrmjdowf Width including drive: 490 mm Side panel height: 80 mm Total conveyor length: approx. 2,820 mm Conveyor length, horizontal: approx. 820 mm Conveyor length, vertical: approx. 2,000 mm Conveyor width: 360 mm Belt type: PVC, cleated belt Belt width: 400 mm Cleats: H = 20 mm, cleat spacing = 400 mm Substructure: mobile, height-adjustable, max: 1,620 mm | min: 1,250 mm Drive: chain drive Motor: gear motor Motor data: 0.762 kW Conveyor speed: 0.05 m/s, constant Net weight: 82 kg Special features: incl. ON/OFF switch Condition: Used / fully functional Function test: OK

Condition: used, Year of construction: 1957, ram hammer weight 200 kg ram hammer stroke 525 mm no. of strokes 150 /min impact energy 420 kJ distance lower die block / ram gudeway 435 mm Throat 425 mm steel forging - rectangular up to 110 mm steel forging - diameter up to 125 mm power requirement 22,0 kW Dwjdpfx Adovzxpbodof weight of hammer 3,9 t weight of anvil 3,0 t weight 6,9 t dimensions (WxDxH) 1,1 x 2,3 x 2,4 m Forging hammer as is where is, WITHOUT putting into operation

Condition: used, mileage: 98,500 km, power: 217 kW (295.04 HP), first registration: 05/2022, overall weight: 18,000 kg, fuel type: diesel, color: blue, axle configuration: 2 axles, next inspection (TÜV): 06/2025, brakes: retarder, gearing type: automatic, loading space width: 2,470 mm, loading space length: 9,900 mm, loading space height: 800 mm, Year of construction: 2022, total width: 2,550 mm, total height: 3,300 mm, Equipment: ABS, air conditioning, navigation system, soot filter, DAF LF290 FA 18t flatbed----Nutzfahrzeuge Göppl GmbH - DAF authorized dealer----EZ: 10.05.2022 HU: 01/2026 SP: 07/2025 Curb weight: 7,887kg Payload: 10,123kg Equipment: local transport cabin * Sun visor outside * Halogen headlights * Driver's seat: Air-suspended luxury driver's seat + armrest * Passenger seat: Fixed, velour * Air conditioning * Navigation radio with two speakers * DAF Connect * Digital tachograph VDO 1c * Adaptive cruise control with FCW and AEBS * Engine PX-7, 217kW/295PS, EURO6e * 12-speed AS-Tronic transmission * Rear axle ratio: 4.63 * Mechanical Differential lock * Wheelbase: 6.90m(!!!) * Tires: 315/70R22.5: Profile approx. 9 mm front, rear: 14mm * Suspension: * -Front: 7.5t parabola * -Rear: 13.0t air-suspended * Plastic fuel tank: 200 liters * AdBlue tank 25 liters * Mounting brackets BAM1 * Air intake duct on the driver's cab roof ----CONSTRUCTION: Flatbed construction in special design: Djdpfxovzdtrj Addewf Dimensions of loading space: * Length: approx. 9,900mm * Width: approx. 2,470mm * Side wall height: approx. 800mm Construction:* Floor made of waterproof glued screen-printed panels. * Floor thickness 30mm, suitable for high point loads * 15 insert sleeves for rectangular tubes approx. 80 x 80 mm * External frame profile with lashing options every 125mm. * Lashing straps can also be attached when the side wall is closed * Aluminum side wall 800mm high, foldable and removable * Front wall stanchions for side loading by forklift * Middle stanchions and rear stanchions foldable and removable * Rear stanchions set lengthways. * All stanchions Kinnegrip system * Substructure hot-dip galvanized * 1x plastic tool box Optional: * Conversion of tachograph to version G2V2 * OBU installation * Tachometer test ----Nutzfahrzeuge Göppl GmbH Weiden - Regensburg - Leupoldsgrün - Bamberg - Nuremberg DAF authorized dealer - DAF service partner - FIAT-Professional Service Partner Subject to errors and prior sale Sale to commercial customers only

Year of construction: 2001, condition: good (used), Top closing stapler with clamping anvils. For coil staples. Closing of filled folding boxes made of single and double corrugated cardboard. Economical closing of corrugated cardboard boxes with joining and overlapping of flaps with clamping anvils. Suitable for single and double corrugated cardboard. Dodpova Nq Hjfx Addowf Adjustable penetration depth to suit the type of carton. Ideally suited for use in packaging lines where a high degree of accessibility and efficiency must be ensured. - Housing made of hardened steel for long life. - Clamping anvils return immediately: up to 20 staple cycles/minute - 1,000 staples per coil: up to 10 times less frequent reloading compared to ordinary staplers For convenient operation, use a balancer in combination with a rotary arm system and a suitable spiral hose. See > accessories. MEROLOCK pneumatic stapler - For CR 1/34 spiral staples, arm length 18 mm, - with sound suppressor - With automatic return of the crimping anvil. - The clamping anvils are specially hardened to extend their life.

Condition: good (used), Year of construction: 2007, functionality: fully functional, conveyor belt length: 3,500 mm, conveyor belt width: 285 mm, conveyor belt speed: 40 mm/s, total length: 3,000 mm, total width: 420 mm, total height: 2,540 mm, overall weight: 120 kg, discharge height: 2,480 mm, motor manufacturer: Panasonic, TAF item number: 1000005843 Manufacturer: DynaCon Year of manufacture: 2007 Overall dimensions (LxWxH) in mm: 3,000 x 420 x 2,540 Width incl. side panel in mm: 330 Width incl. drive in mm: 400 Side height in mm: 250 Total conveyor length in mm: 3,500 Conveyor length, horizontal in mm: 1,000 Conveyor length, vertical in mm: 2,500 Conveyor width in mm: 285 Belt type: Plastic slats / link chain belt Belt width in mm: 295 Cleats (cleat height/cleat pitch) in mm: 50 / 300 Substructure: rollable / height-adjustable Sliding surface: steel Inlet height in mm: max: 280 min: 200 Outlet height in mm: max: 2,480 min: 2,400 Drive: drum drive Motor type: Panasonic Motor data: 400 V, 50 Hz, 0.3 A, 30 W Conveyor speed in m/s: 0.04 Net weight in kg: 120 Special features: incl. outlet hopper and cycle control Condition: used / fully functional Function test: OK Dwsdsx Dm S Eepfx Addof

Condition: good (used), Year of construction: 2007, functionality: fully functional, conveyor belt length: 3,300 mm, conveyor belt width: 285 mm, conveyor belt speed: 65 mm/s, total length: 2,900 mm, total width: 420 mm, total height: 2,150 mm, overall weight: 100 kg, TAF item number: 1000005827 Manufacturer: Fimatech Year of manufacture: 2007 Overall dimensions (LxWxH) in mm: 2,900 x 420 x 2,150 Width incl. side panel in mm: 330 Width incl. drive in mm: 360 Side height in mm: 250 Conveyor length, total in mm: 3,300 Conveyor length, horizontal in mm: 1,200 Conveyor length, vertical in mm: 2,100 Conveyor width in mm: 285 Belt type: Plastic slats / link chain belt Belt width in mm: 300 Treads (height of treads/tread pitch) in mm: 50 / 320 Substructure: Rollable Sliding surface: Steel Inlet height in mm: 340 Outlet height in mm: Drive: Head drive Motor type: Panasonic Motor data: 50 Hz, 400 W, 0.12 A Conveyor speed in m/s: 0.065 Net weight in kg: 100 Special features: Including cycle control Dodpsx Dm Rbsfx Addswf Condition: Used / fully functional Function test: OK