Used Arc for sale (692)

Condition: good (used), Thermo Fisher ARCTIC A25 Technical data: Controller type: SC150 Capacity: 12 l Dedszgcgdopfx Aptecl Communication: RS232, RS485, Ethernet/LAN, analog I/O Cooling capacity: 500 W Flow rate: 17 l/min Pump type: Pressure pump, suction pump Temperature range: -25°C to +100°C Max. pressure: 300 mbar Temperature stability: 0.02°C Dimensions (L x W x H): 48.3 x 27.3 x 71.1 cm Length: 48.3 cm Internal length: 18.4 cm Width: 27.3 cm Internal width: 17.3 cm Height: 71.1 cm Internal depth: 20.4 cm Weight: 36.1 kg Electrical requirements: 230 V 50 Hz Voltage: 230 V Frequency: 50 Hz Condition: used Scope of delivery: (See pictures as shown) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2016, techncal data: - Producer: Printworld - Type. 3D - PUVD 1300 - Working width: max. 1.300 mm - UV-lamp length: 2 x 1.600 mm arc length - Curing systems: 2 pcs of curing systems from top + 1 pcs curing system from down under - UV- power regulation: UV- lamps are able to be individually controlled (30% -100%) - Reflector: Printworld Multifocal –Reflector - Conveyor transport width: 1.400 mm - Total lengths: 4,5 m - Conveyor speed: 3 – 20 m/min - Substrate passage height: 60 mm, max. (option higher) - Execution conveyor belt: PTFE Fiberglass mesh conveyor belt, anti-static coated - Conveyor speed regulation: Infinitely variable with digital control and monitoring - Conveyor adjustment: Conveyor belt guiding system - Conveyor belt drive: Stepper motor with variable speed conveyor belt and digital - control and monitoring - UV radiation protection: Built in on the machine frame - Energy Saving: Automatic standby circuit with power reduction about 10% - Operation / control: Schneider Modicon M258 Logic Controller processor with Magelis colour touch screen - Inlet height: 850 – 900 mm or by appointment) - Outlet height: 850 – 900 mm (or by appointment) - Electrical connection: 400V~, 50 Hz, 3- Phases +N +PE - Current 135A Dcjdpfxezf N Rge Aptol - Location: on stock

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 5/1-107, functionality: fully functional, total height: 1,730 mm, total length: 6,100 mm, total width: 1,440 mm, Equipment: CE marking, The machine has the following configuration: 1. Pre-milling unit (tools included) 2. Glue application unit Dcedpfx Ajy Akgtoptel 3. Pressure rollers (tools included) 4. End trimming unit (tools included) 5. Not specified (tools included) 6. Corner rounding unit (tools included) 7. Radius scraping unit (tools included) 8. Not specified (tools included) 9. Flat scraping unit (tools included) MACHINE DETAILS Number of units: 9 Voltage: 400 V Power consumption: 21.9 A Main fuse: 50 A Dimensions Dimensions (L x W x H): 6,100 x 1,440 x 1,730 mm Transport packages: 1 EQUIPMENT CE marking

Condition: like new (used), Year of construction: 2023, functionality: fully functional, input voltage: 400 V, open-circuit voltage: 87 V, welding current at 60% duty cycle: 270 A, welding current at 100% duty cycle: 220 A, input current: 25 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 300 A, input frequency: 60 Hz, We are offering this as-new EWM Tetrix XQ 300 puls AC/DC Expert 3.0 5POL welding machine, year of manufacture 2023. Including Cool XQ 41-1 cooling module Mains voltage: 380–400 V Mains frequency: 50/60 Hz Rated current I1,max: 24.9 A Rated current I1,eff: 15.5 A Open-circuit voltage (U0): 87 V MIG/MAG welding current range: 3–300 A MIG/MAG welding voltage: 10.1–22.0 V MIG/MAG duty cycle 40%: 300 A MIG/MAG voltage at 40% duty cycle: 22.0 V MIG/MAG duty cycle 60%: 270 A Dsdpjy Sxkfofx Aptscl MIG/MAG voltage at 60% duty cycle: 20.8 V MIG/MAG duty cycle 100%: 220 A MIG/MAG voltage at 100% duty cycle: 18.8 V Manual arc welding current range: 5–300 A Manual arc welding voltage: 20.2–32.0 V Manual arc welding duty cycle 30%: 300 A Manual arc welding voltage at 30% duty cycle: 32.0 V Manual arc welding duty cycle 60%: 260 A Manual arc welding voltage at 60% duty cycle: 30.4 V Manual arc welding duty cycle 100%: 210 A Manual arc welding voltage at 100% duty cycle: 28.4 V Protection class: IP23 Year of manufacture: 2023 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: like new (used), Scanner with charging dock and cable Width: 270 mm Height: 120 mm Dodpfx Apsy Uvtpjtocl Depth: 245 mm Weight: 2 kg including packaging Condition: Like new

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system -Manufacturer: EWM, PULS MIG/MAG welding machine -Type: LUD320W Dedpfx Apoy Ulu Netjcl -Max. welding power: 500 A -Features: Water-cooled -Wire feeder case: HIGH-SPEED integral 4X4S 4-roller drive -Dimensions: 1370/820/H1500 mm -Weight: 242 kg

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system -Manufacturer: Esab, PULS MIG/MAG welding machine -Type: AristoMig 500W -Max. welding power: 500 A -Features: Water-cooled -Wire feeder case: 4-roller drive Esab type AristoFeed 48-4 -Quantity: 3x Esab, PULS MIG/MAG welding machine available -Price: per piece Dcedpfx Apey Ulzistjl -Dimensions: 1200/700/H1730 mm -Weight: 210 kg

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 15 h, functionality: fully functional, machine/vehicle number: ET.200.01.2025, overall weight: 134 kg, input voltage: 220 V, input current: 21 A, type of input current: AC, warranty duration: 24 months, Equipment: documentation/manual, METALSELF ET-200 Automatic Orbital Welder + EC-120 Welding Head Ex-Demo (-40%) DESCRIPTION: MACHINE CONDITION: We offer for immediate delivery a Metalself orbital TIG welding system consisting of an ET-200 power source and an EC-120 closed-chamber welding head. The machine (manufactured in 2025) is in LIKE-NEW condition: it has never been used in production and was used exclusively as an internal demonstration unit. Due to its "Ex-Demo" status, the entire system is offered with an exceptional 40% discount on the list price. SYSTEM OVERVIEW: The system automates TIG welding on thin-walled pipes, performing a complete 360° rotation around the joint. It is the ultimate solution for industrial piping, fluid, food, and pharmaceutical systems, ensuring perfect repeatability, impeccable aesthetics, and weld seams free of defects. POWER SOURCE SPECIFICATIONS (ET-200): -Technology: Microprocessor-controlled inverter for millimeter-precise arc control. -Welding current: 5 ~ 200 A. Modes: Direct Current (DC) and Pulsed, ideal for thermal control on stainless steel and titanium. -Interface: Intuitive touch screen with an "Auto Prog" system that automatically generates parameters by simply entering the tube diameter and thickness. -Capacity to store 200 programs. Cooling: Integrated water circulation system. Quality Control: Integrated thermal printer on the machine and USB port for exporting welding reports. -Power supply: 220VAC ±10% - 50/60 Hz (Consumption 4.5 KVA). -Dimensions and Weight: 500 x 380 x 300 mm; 28 kg. WELDING HEAD SPECIFICATIONS (EC-120): -Type: Orbital welding head with closed chamber. -Operating diameter range: from Ø 19 mm to Ø 114.3 mm. -Maximum penetration thickness: ≤ 3 mm. -Shielding gas: Argon. -Cooling: Water-cooled. -Welding head dimensions: 540 x 195 x 54 mm. -Welding head weight: 6.5 kg. THE SUPPLY INCLUDES: -ET-200 power source and EC-120 welding head. -Dedicated trolley for easy and safe movement of the system in the workshop. -Power cables, control connections, ground clamp, and hydraulic/gas tubing. -CE Declaration of Conformity. -Complete user and maintenance manual (including parts list and programming instructions). Dodpfjzw Uh Ujx Aptecl SALE CONDITIONS: -Price: -40% compared to the new list price. -Delivery: Ex Works (EXW) in Settimo Torinese. -Availability: Immediate. The machine can be viewed at our facility and is available for any testing or practical demonstration.

Condition: new, input voltage: 400 V, welding current at 60% duty cycle: 400 A, welding current at 100% duty cycle: 300 A, welding current (min.): 25 A, welding current (max.): 400 A, Lorch iQS series – Top-level welding for maximum productivity in industrial manufacturing Maximum performance and reproducible quality: The Lorch iQS series is a powerful, digitally networked MIG-MAG welding system for demanding industrial applications. The newly developed inverter generates an exceptionally stable and smooth arc. All parameters can be continuously adjusted to the optimal operating point – for high-quality, reproducible welds on steel, stainless steel, and aluminum. The iQS is suitable for both manual welding and robotic integration, providing a future-proof platform for modern manufacturing companies. Less spatter, less rework: The innovative Smart Process Control Engine enables continuous development of the available welding programs. New processes and functions can be transferred to the system, ensuring that users always work with the latest technology. The integrated RCS module improves short-circuiting in particular: the process runs more cleanly, the weld pool is easier to control, and spatter formation is reduced. This increases weld quality and reduces time-consuming and costly rework – especially on thin sheets under 3 mm. Lorch Speed processes for higher productivity: Depending on the configuration, proven Lorch processes such as SpeedPulse XT, SpeedArc, SpeedTwin, SpeedRoot, SpeedUp, and SpeedCold are available. They enable higher welding speeds, better penetration, attractive weld bead surfaces, and precise process control. Users receive a flexibly configurable solution for a wide range of materials, weld geometries, and welding positions. Intuitive operation with Smart Cockpit: The robust 7-inch Smart Cockpit can be operated via touchscreen or rotary control – even with welding gloves. A clear menu guides users, displaying only suitable material, wire, and gas combinations, thereby reducing incorrect settings. Important parameters can be accessed immediately via the configurable QuickAccess menu. Current values are visualized during welding; subsequently, the Hold function indicates whether the specified parameters have been met. Networked, robust, and easy to service: WLAN and Lorch Connect enable the recording, documentation, and analysis of welding data, as well as updates and future function upgrades. The encapsulated air duct, the dust-protected electronics area, and the modular design simplify maintenance and ensure uncomplicated service. Optionally, the robust MF-09 wire feeder complements the system with 4x4 drive, a quick-change system, and various chassis and transport options. Technical performance variants: The iQS 3 offers a welding range of 25 to 320 A, and the iQS 5 offers a range of 25 to 400 A. Both models operate on 3-phase power supplies from 380 to 480 V, have an IP23S protection rating, and a robust 4x4 wire feed unit. The equipment and scope of delivery depend on the chosen configuration. Document 1: technical details IQS series (EN) Document 2: brochure IQS series (EN) Document 3: technical data IQS series (DE) Dcsdpfx Aezwfgbsptjl Document 4: brochure IQS series (DE)

Condition: good (used), TAFA TCV 400 Arc Spray Power Source For sale is a TAFA TCV 400 power supply for industrial arc spray systems (Twin Wire Arc Spray / Metallizing). This unit is ideally suited as a replacement or to expand existing TAFA/Praxair systems. Technical data: Manufacturer: TAFA (Praxair Surface Technologies) Model: TCV 400 Output current up to 500 A Three-phase power supply Industrial design for professional use Suitable for wire arc spraying (Twin Wire Arc Spray) Application areas: Corrosion protection Wear protection Shaft repairs Bearing fits Dcjdpfx Aozqt Uyjptol Mechanical engineering Power plant and equipment construction Metallization of steel components Condition: Used Visual condition, see images 3 units available Inspection and collection: Marie-Curie-Str. 1 16225 Eberswalde

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, ABB Robotics IRB 1600-8/1.45 robot, serial number 67099, manufactured in 2004. The ABB Robotics IRB 1600-8/1.45 (with IRC5 M2004 controller) is a robust 6-axis industrial robot known for its high reliability, short cycle times, and path accuracy. Technical data: Max. payload: 8 kg (or 8.5 kg) Max. working range (reach): 1450 mm (1.45 m) Year of manufacture: 11/2011 Repeatability: 0.02 mm Controller: IRC5 M2004 Protection class: Standard IP54 (optional FoundryPlus 2 / IP67) Mounting options: Floor, wall, inclined, or suspended Application areas: Dedpfjzm E N Iex Aptjcl The robot is ideally suited for gluing, material handling, machine tending, arc welding, and deburring/grinding. It utilizes ABB's QuickMove and TrueMove motion control for maximum precision at high speeds. Key advantages: The IRB 1600 has cycle times up to 50 percent shorter than competing robots in material transport, machine maintenance, and process applications. It accelerates and decelerates faster than other robots, saving time between tasks. This is made possible by ABB's patented second-generation QuickMove motion control, combined with the robot's powerful motors and low friction losses in the bevel gears. Bevel gears with low friction and no unnecessary movements, thanks to QuickMove and TrueMove, reduce power consumption to 0.58 kW at maximum speed and even less at low speeds. The airborne noise level is only

Condition: excellent (used), Year of construction: 2022, operating hours: 3,600 h, functionality: fully functional, Description: Like-new welding cell including bolt-setting equipment with only 3600 operating hours, consisting of: Robot Qirox QRC 350, QC2 control system including connection cable, programming handheld device, gas nozzle sensor, arc welding search, point editor, QWP, QTI, Manax, hard drive, center-based circular programming Base stand Welding machine Qineo Next 452 Motion, wire feeder, welding torch, torch testing gauge, hose package, mechanical cleaning, 1 light curtain, start pre-selection, safety grid in the insertion area, service door with limit switch protection 1 manipulator QR-WP-TC 2.5 KN for components up to Ø 800 mm, plate distance 2000 mm and a load capacity of 250 kg. 1 extraction hood including hose lines without filter unit 1 Bolte bolt-setting device complete Automatic changeover system between bolt-setting head and welding torch Dcjdpezvm Anjfx Aptol Documentation, manufacturer's declaration Accessories: Functional guarantee. Services available upon request. Delivery date: possible in the short term. Subject to prior sale. The system can be inspected under power near Siegen. Special price if dismantled by the end of September 2026!

Condition: used, Plasma impulse gas metal arc welding machine, pulse machine EWM Type Tetrix 400 Plasma / Tetrix 400 DC-P Robot Plasma welding and soldering machine Art. No.: Serial No.: Year of manufacture 2003 Output: 400 amps = 40% duty cycle 360 amps = 60% duty cycle 300 amps = 100% duty cycle Setting range: stepless Open-circuit voltage: approx. 26 volts Dedpfx Aszwb R Noptscl Mains connection: 400 volts, 50 Hz, 32 amps plug - Digital display for current - Digital display for voltage, job, and program - Various welding programs can be selected - Pulse mode - Separate 4-roller wire feeder EWM, Type DV cold wire hand with connecting hose package approx. 5 meters - Approx. 4 meter hose package - External EWM water cooling, Type Cool 71 U41 DKF - External high-voltage unit - Welding machine equipped with 1 mm welding wire Space required L x W x H: 1300 x 640 x 1830 mm Weight: 245 kg Very good condition

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,300 mm, total length: 9,000 mm, total height: 2,300 mm, overall weight: 9,000 kg, Mobile Roll Forming Machine for Frameless Steel Arch Buildings Automatic Production Line for Self-Supporting Steel Hangars and Arch Roofs The mobile roll forming machine is designed for the on-site production of self-supporting curved steel panels used for the construction of frameless steel buildings, arch hangars and self-supporting metal roofs. The technology makes it possible to construct large-span steel buildings without a conventional internal steel frame. Steel coil is formed into a structural profile, cut to the required length and then curved to the required building radius. Several curved panels are connected together using a special seaming machine to form a strong, continuous and self-supporting arch structure. The equipment can be used for the construction of: frameless steel hangars aircraft hangars agricultural buildings grain and machinery storage buildings warehouses industrial buildings workshops garages livestock buildings sports facilities self-supporting steel roofs temporary buildings military and logistics storage facilities Mobile Production Directly at the Construction Site One of the main advantages of this technology is the possibility of producing the complete structural panels directly at the construction site. The main forming and curving equipment is installed on a mobile trailer chassis. The machine can therefore be transported to the building site, where steel coils are converted into finished structural arch panels. This is particularly important for long panels that would otherwise be difficult or expensive to transport. The supplied machine has two axles and eight tyres intended for movement around the construction site. Production Process The complete production process consists of several stages: Steel Coil → Decoiling → Straight Profile Forming → Cutting to Length → Curving → Panel Seaming → Lifting → Installation The supplied technical manual describes the machine as a combination of a roll forming section and an arch bending section, with electrically driven forming and bending and hydraulic cutting. Main Technical Specifications Parameter Specification Machine type Mobile arch sheet roll forming line Application Frameless / self-supporting steel buildings Feeding width 1000 mm Effective profile width Approx. 610 mm Material thickness 0.8–1.5 mm Forming stations 13 + 1 Straight panel forming speed Up to 15 m/min Arch panel forming / curving speed Up to 13 m/min Seaming speed Approx. 6 m/min Forming motor 7.5 kW Curving / bending motor 5.5 kW Cutting motor 4.0 kW Additional drive 3.0 kW Total installed motor power Approx. 20 kW Cutting system Hydraulic Cutting tool material Cr12MoV, heat treated Roll material 45# steel, chromed and hardened Roller hardness HRC 58–62 Control system PLC Machine dimensions Approx. 9000 × 2230 × 2200 mm Machine weight Approx. 9000 kg Dodpoztwx Ujfx Aptscl Chassis 2 axles / 8 tyres Different Profile Sizes Available The machine can also be manufactured for different structural profile dimensions according to the required building span and application Available configurations may include different: coil feeding widths finished profile widths profile depths steel thicknesses arch radii building spans For example, depending on machine configuration, profiles can be designed for relatively small buildings as well as large-span self-supporting arch structures

Condition: good (used), Gas metal arc welding machine, arc welding machine, MIG/MAG welding machine, pulse welding machine, inverter welding machine, impulse welding machine Dsdszrt E Uspfx Aptecl -Manufacturer: Ess, MIG-MAG shielded gas welding machine -Type: E1-3300 -Max. welding current: 330 A -Features: Water-cooled, remote control -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 1020/520/H980 mm -Weight: 116 kg

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 24 months, type of cooling: water, welding current (min.): 30 A, welding current (max.): 400 A, OTC DAIHEN CPTX-i 400 2W Built for professionals. Ready for years of production. Looking for a reliable industrial MIG/MAG welding machine that performs day after day? The OTC DAIHEN CPTX-i 400 2W is designed for companies that value reliability, welding quality and low operating costs. Fully inspected, tested and ready for immediate use. ✔ Industrial 400 Amp inverter ✔ Exceptional arc stability ✔ Built for intensive daily use ✔ Reliable Japanese technology ✔ 3 months warranty Djdpfx Aoznt Rioptecl Included: • OTC wire feeder • Interconnecting cable • Ground cable • Welding torch (if included) 🌍 Worldwide shipping available. 📩 Contact us for more information, photos or a demonstration. Specifications 400 Amp 400 Volt Water-cooled MIG/MAG Synergic 2/4 Step Industrial inverter 4-roll wire feed 24 Months Warranty Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, functionality: fully functional, mileage: 9,90,000 km, power: 315 kW (428.28 HP), first registration: 09/2017, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, onboard computer, Mercedes Actros 1843 - 09.2017 Dcedpfx Aewd D Nqjptjl Rolfo EGO 4.27 VVF - 09.2017

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, Welding robot Qirox QRC 320 incl. V7 control system and programming handheld device with cable, connection cable robot control cabinet, tactile sensor, arc welding search, point editor Cloos welding machine Qineo Puls 600, wire feeder, welding torch, torch hose package, mechanical cleaning, torch testing gauge OPTION: Motion weld equipment and Qineo Next 452 1 cell base frame incl. partition walls 1 two-station indexing table incl. 2 rotating-swiveling manipulators Load capacity 250 kg/station, rotation radius 500 mm 1 light barrier, 1 start box, arc protection on the indexing table, 1 service door with end-of-travel limit switch, connection control integrated Documentation, manufacturer's declaration Delivery date: possible within 8 weeks. Subject to prior sale. Djdozrpf Djpfx Aptocl

Condition: used, Year of construction: 2007, machine/vehicle number: 506 8026 / 479 6312 / 7028, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 2,500 mm, workpiece height (max.): 160 mm, number of axes: 4, actuation type: electric, overall weight: 3,000 kg, Equipment: documentation/manual, For sale: a complete, functional, and production-used welding and cleaning line from Rotox, manufactured in 10/2007. The line was used at EUROCOLOR for the production of PVC windows and doors (Schüco and Rehau profiles). Working direction: right to left (the right beam, from the welding machine's side, is a fixed beam). The line includes: ● Rotox SMK 506 4K four-head welding machine ● Rotox EPA 479 automatic corner cleaning machine (four-axis, CNC) with WT 427 rotating station ● FIMTEC cooling station Photos and documents are available at this link: 1. Rotox SMK 506 4K four-head welding machine ● Year of manufacture: 10/2007, machine number: 506 8026 ● Fixed side of the machine: right (working direction from right to left) ● Profile arrangement on the table: outer side of the window facing down ● Weld bead allowance: 6 mm ● Flash control: 0.2–2.0 mm, automatically adjustable knives from above and below (used at approximately 0.2 mm) ● Maximum welding dimension: 2500 x 2500 mm (in practice, frames were welded up to approximately 2650 x 2650 mm) ● Minimum welding dimension: 320 x 420 mm, with automatic transport ● Frame welding: min. 350 x 500 mm – max. 2500 x 2400 mm ● Welding of U and T profiles and door frames (C-type welding) ● Heated knives for controlling the weld bead ● Quick replacement of Teflon film ● Machine safety fencing ● Data acquisition system from the welding machine ● Operating counter: approximately 385,000 welding cycles ● Manufacturer's specifications: maximum connection power 10 kW, voltage 400 V, current 20 A, 50 Hz, air pressure 6–7 bar, air consumption approximately 150 NL/weld, profile height 45–160 mm, maximum profile width 140 mm, weight approximately 3000 kg. Material processed: PVC profiles 2. Rotox EPA 479 automatic corner cleaning machine + WT 427 rotating station ● Year of manufacture: 10/2007, cleaning machine number: 479 6312 ● WT 427 rotating station connected to EPA 479: machine number 7028, dimensions 5700 x 2500 mm, transport direction to the right ● Fixed side of the machine: right ● Profile arrangement on the table: outer side of the window facing down ● Maximum dimensions of processed frames: 2500 x 2500 mm ● Unit for drilling holes for Siegenia and roto hinge hardware – unit with a six-spindle head, pneumatic drive ● Hole drilling for hinge: 4 x Ø3 mm, 2 x Ø6 mm (according to technical drawing) ● Equipment: 2x unit for cutting the visible surface, 2x second unit for cutting the visible surface, 2x CNC unit for cleaning under the seal (pneumatic drive), unit for cutting the inner surface vertically (sash bar), unit for cutting the angled surface up to 23° with an additional bevel/arc (chisel cleaning), unit for cutting the inner surface horizontally, tools for internal processing, 170 mm contouring blade (right), grooving knives S=3.0 mm/G=0.5 mm (2 pcs.), knives for flat trimming without a groove (2 pcs.), extension cable for the control panel ● Operating counter: approximately 9,863,552 cleaned corners ● Note: Precise minimum dimensions of profiles and welds that can be cleaned in manual/automatic mode – to be confirmed directly with Rotox Polska 3. FIMTEC cooling station ● Year of manufacture: approximately 2021–2022 ● Purchased from GRAF Machines are functional, disassembled – not currently in operation – prepared for transport. Contact: EUROCOLOR Sp. z o.o. ul. Toszecka 47, 44-120 Pyskowice Dcedpfxozp Nz Ts Aptsl Machines are functional and ready for inspection and demonstration before purchase. Disassembly

Condition: excellent (used), Year of construction: 2021, • Baykal BPL-H 4012 • Supplied new in 2021 • Hypertherm XPR300 AutoGas • EDGE Connect CNC • Twin plasma heads • Arc hours: 3,480 and 5,448 Dsdpfszp D T Djx Aptscl • 4 m x 10 m bed

Condition: new, Year of construction: 2026, HOFMANN TFS 107 Table milling machine with swivel adjustment +/- 45.5° 7.5 kW motor, 400 V, 50 Hz, Table size 1,200 x 815 mm, heavy-duty ribbed cast iron table, with table rings Electronic start and braking system Electric height and swivel adjustment in rapid and slow mode Dcodpfx Aozyf Ikoptsl accurate to 1/10, height adjustment approx. 145 mm, Swivel adjustment +/- 45.5° 4 speeds 3,000/4,500/6,000/9,000 Milling fence type 2601, efficient with multiplex fence jaws Fixed milling spindle Ø 30 mm with quick-release nut "fix" Left/right rotation, machine socket, arc milling guard type TAPOA, Hofmann "Centrex". Includes options: - Table size 2000 x 815 mm with extendable support by 480 mm, instead of standard table - Stepless speed control TFS 107 from 1,500 to 10,000 rpm incl. 7.5 kW motor, - HOFMANN milling fence type 2620, including quick-release system for the fence jaws, digital display - 2 cast iron fence jaws 500/500 mm - Control panel moved upwards - Tool compartment for TFS 107

Condition: used, Legi-Air 4040Z with Zebra110pax4 label printer and pneumatic stamp. RA1933 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status indicator and buttons Print type: thermal transfer printing or direct thermal printing selectable Interfaces: RS 232 Seriel, IEEE 1284 Print media: standard media, tags and RFID media (reading and coding of RFIF labels) label length min: 12,7mm width print media: 16-114mm ribbon width: 25,4-107mm Ribbon length max: 900m Roll size diameter core: 25,4mm Dsdpok Abllsfx Aptscl Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) dot size 0,125mm x 0,125mm Print speed: 12 inch/second

Condition: used, Year of construction: 2014, Transnorm Rising falling Incline with arch belt conveyor GF 7200+700-700-600 RA2201 Technical data: Conveyor length (NL): 7900 mm ( 7200 mm incline + 700 mm arch ) frame width (NB): 700 mm, 8000 mm with motor Dsdpfxoq Izpks Aptocl belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,75 Drive: SEW gear motor, R27 DT90S4/BMG/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed controll Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Omnidirektionaler barcode scanner X Manufacturer: ACCU-SORT Featured: The Omni-directional barcode scanner product family mini-X are used for the reading of arbitrarily oriented bar codes. This is made possible by an optical arrangement of several arranged crosswise to each other scanning, which is integrated in a compact housing. Bar codes can be identified at a distance of 500 up to 1800 mm. A total of six configurations to satisfy a wide range of read. With the DRX de fragmentierung technology also badly damaged or poorly printed codes can be reconstructed safely. The TachTrac function maps the read result the right object with several objects in the reading pane. RS 232, RS 422 or RS 485 interfaces the reading result is decoded in the device is delivered. Usage area: The Omni-directional barcode scanner X for arbitrarily oriented bar codes is used in identifying non-aligned objects or labels in the Variantenfertigungs - or material flow control, and charge capture. Multiple scanners can be operated side by side to extend the reading width. Specific applications are picking and returns handling items in the shipping trade of so-called small, E.g. From CD\'s, books, or videos, as well as the sorting in distribution centers. The scanner in the identification of wheels or bodywork in automobile production, as well as packages for package services is further used. Delivery in Germany (without Islands): free Dsdpsk Aa Dwofx Aptjcl incl. mains cable without software Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2006, with automatic lifting table feeding system with 4 precision spindles, ensuring the stack is always held evenly at the correct level. Equipped with 4 powered roller groups. Lifting table dimensions: 6000 x 2200 mm. Feeding side: left (from the operator's perspective). Max. stack height: 450 mm. Lifting table height (bottom): to be defined. Speed for lifting and lowering: 0.7 m/min. Lifting table drive: 3 kW. Powered roller group: 4. STANDARD CONFIGURATION. Usable cutting length: 6000 mm. Lifting table feeding: Yes. Working height: 950 mm. Saw blade overhang: 100 mm. Clamping device opening: 117 mm. Machine control: G Drive RT. Number of clamping devices movable in X: 1. Number of clamping devices movable in X and Y: 1. Number of fixed clamping devices: 1. Min. material thickness (with side alignment): 10 mm. Min. material thickness (with lifting table feeding): 10 mm. Min. panel dimension (with lifting table feeding): 2400x1200 mm. Max. panel dimension (with lifting table feeding): 5500x2070 mm. Max. panel dimension (without lifting table feeding): 5800x2010 mm. Safety device according to CE: included. Supply voltage: 400 V / 50 Hz. MACHINE CONFIGURATION. Machine bed: The machine bed structure made of steel is welded using arc welding and then milled and finished on CNC machines. The rigid structure of the machine bed guarantees both high cutting quality with high cutting speed, as well as the enormous durability of the entire machine. Saw blade overhang: 100 mm. Power of main saw motor: 7.5 kW. Power of scoring saw motor: 2.2 kW. Diameter of main saw blade: 400 mm. Diameter of scoring saw blade: 215 mm. Feed rate of saw carriage: Forward: 1-170 m/min. Return: 170 m/min. Motorization of saw carriage feed: Servo drive. Diameter of dust extraction port (bottom, 1x): 200 mm. Diameter of dust extraction port (top, 2x): 115 mm. Thanks to the rigid machine bed construction, the masses are distributed in the best possible way, which prevents twisting and thus guarantees an absolutely vertical run of the saw blade. Machine table made of steel with individual, removable support elements made of high-quality, durable material. The saw carriage runs on two round guides, which are mounted horizontally on one level. Large prism rollers (diameter 86 mm), with spring-loaded counter rollers, ensure smooth linear feed, as well as very low contact pressure and enables virtually wear-free operation of the saw carriage. The weight and forces acting on the saw carriage are evenly distributed on the two guides (50/50) and on each individual prism roller. The saw carriage runs absolutely without lubricant on the guides. The two guides are located away from the cutting line, outside the direct dust area. The diameter of the guide rods is 40 mm, making them the largest and most stable guides used in this sector. Pneumatic quick clamping system; for quick and convenient tool changes. This system is extremely reliable in operation, as it is mechanically clamped via a flange with a bayonet lock and spring force and unlocked via a pneumatic quick coupling. The flange must be rotated by approx. 10° in order to remove it. Due to excellent accessibility and the fact that the operator does not need any other tools, the tool change is very easy and can be carried out in seconds. The scoring saw adjustment is made from the outside. Djdpfx Apozn N Iketscl