Used Ess Uniarc 5 for sale (87,337)

Condition: used, TIG welding machine Output: 220 Amp = 35% duty cycle (ED) 160 Amp = 60% duty cycle (ED) 130 Amp = 100% duty cycle (ED) Current type: AC and DC Mains connection: 400 V, 50 Hz, 32 Amp plug - infinitely variable power setting - high-frequency ignition - 2-stroke and 4-stroke operation Hfedpfxjw Htywj Aaben - water cooled - 7.5 meter TIG torch package with hand torch - shielding gas pressure regulator Space requirement L x W x H: 900 x

Condition: used, Lot of 5 units WIG welding machines ESS model Thyrotig - Thyroplasmma 250 (DC) WIG welding machines in need of repair Year of manufacture: 1991 to 1994 Hedpfx Asw Hhbioabjfn Output: 250 Amp. = 60% duty cycle, 195 Amp. = 100% duty cycle Current type: DC Mains connection: 400 Volt, 50 Hz, 32 Amp plug - High-voltage ignition - 2-stroke and 4-stroke operation modes - Water-cooled - Some parts missing - Delivered without torch sets/hoses, scope of delivery as pictured Space requirements (L x W x H): 1200 x 570 x 920 mm Weight per welding machine: 255 kg Total weight for all 5 machines: 1,275 kg Three machines are operational. Two were kept in storage as parts donors. The units are no longer tested and are being sold as in need of repair.

Condition: good (used), Trapezoidal taps Hfedsdx Uy Iepfx Aabsn Diameter 40 mm Pitch 1/5 inch

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm Hsdpevuuknefx Aabjfn capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: new, Vertical stainless steel storage tank, diameter 2,5 m height 6m with 4 legs, manhole, agitator, 10,6 kW motor, air filter... Hfodpfx Aaeik Hd Ieben

Condition: used, Three jaw Chuck (223/5) Hjdpfxsddym Re Aabofn Diameter 190 mm Height 130 mm

Condition: used, machine/vehicle number: 008227, X axis working area: 3280 mm Y axis working area: 1326 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Total number of drilling spindles: 24 Hodpoxn Ngasfx Aabsfn Total number of tool changer positions: 31

Condition: used, Eccentric press, 5 ton eccentric press, for sale in excellent condition pressing force: 5 tons table size: 260x210 mm stroke length: 130 mm 3kW, 400V 50Hz Hfodpeuf Av Uefx Aabon

Year of construction: 2001, condition: excellent (used), Faceplate diameter 600 mm height 130 mm LK Mounting :Diameter 128.5 mm Hfodpfx Asd Tyvfeabjn Groove width 16 mm Safety thread 200x 4 mm

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1000028154, Equipment: rotational speed infinitely variable, The machine was commissioned in 2019, single owner. It has seen very little use. Description Hfedexdl H Ujpfx Aabsn Useful working area, 5-axis configuration: X=3280mm, Y=1600mm Axis travel: X=3706mm, Y=2294mm, Z1=515mm, Z2=371mm Axis traverse speed: X=80m/min, Y=60m/min, Z=30m/min Electrospindle: HSD, 5 axes 11 kW, with continuous 360° rotation on B and C axes, enabling high-precision machining of complex shapes liquid-cooled Drilling head: HSD 20 vertical spindles 4 horizontal spindles grooving discs on X-axis grooving discs on Y-axis Work table: 6 cross beams Isbjwhypnjni Itxtobb 4 suction cups per beam preparation for uniclamp Tool magazines: 16-position revolver-type tool changer Vacuum system: Vacuum pump with a capacity of 250 m³/h, ensuring firm clamping of the parts during processing

Condition: used, functionality: fully functional, Year of construction: 2015, Various clamping devices silver 10kN opening range 0-8mm jaws WxH 60x40mm Brown wedge clamp 25kN opening range 0-10mm jaws with serrated teeth WxH 60x100mm Pneumatic clamping device green with control unit 5kN opening range 0-10mm jaws 75x25mm 50x25mm 25x25mm Hodpfexgh Igsx Aabjfn Wedge clamp 100kN green opening range 0-13mm jaws with serrated profile WxH 50x75mm connection 31/12

Year of construction: 1992, condition: used, horizontal stainless steel tanks Hedpfx Aaew Tamijbsfn Additional title: horizontal stainless steel tanks Content: 6277 l Max. pressure: 0,9 bar Length: 2500 mm Width: 1800 mm Height: 1800 mm Material: stainless steel Position: horizontal tanks suspended on two levels in a steel structure Features: Manhole, sampler, ladder bracket and outlet on the front, connection for gas fittings on top

Condition: used, machine/vehicle number: 008184, X axis working area: 8185 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Hedew Tivgjpfx Aabjfn Total number of tool changer positions: 22

Year of construction: 1999, condition: good (used), Edgebander Biesse Polymac ERGHO 5, year 1999 Biesse Italy S/N 80709 max. panel thickness 10-45 mm min and max banding strip heught 13-60mm max thickness of banding material in rolls: 0,4mm- 3mm min. panel width 50 mm min. length 150 mm operating speed m/min 10/20 Technical information: Glue Pot VC 700 End trimming unit 701 Edge trimming unit RS 700 Corner rounding CR 200 Tilting Edge Trimming unit +Chamfering RI 700 Compact edge scraper RBK501 Brushes SP700 Edge Sanding unit LV 700 heated infeed guide PLC control panel support guide Large diameter roll holder edge cutting device for 3mm thick rolled edges 400 V , 50 Hz CE- marked Hfjdpfxegtx Aqo Aaben Dimensions of the Maschine: ( Lx W x H ) = 4950mmx 1700mm x 1530mm 2900 Kg Technical information under subject of correction

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, TREIF CIRCULAR BLADE BREAD SLICER TEFLON SELF-SERVICE MACHINE OVERHAULD Hedpfx Aajgg Sz Uobsfn Made entirely of stainless steel on casters For further questions, please email or call. Thank you in advance.

Year of construction: 2021, condition: ready for operation (used), Cabinet height: 2730mm, room height: 3700mm, smoke trolley dimensions X/Y/Z: 1980mm/1040mm/1020mm, max. spit length: 1000mm, connected load with LP heating: 242.5kW, floor space X/Y: 1510mm/5760mm, min. exhaust air outlet height: 3700mm, floor recess depth: 50mm, steam consumption: 316kg/h, compressed air consumption: 20l/h, water consumption: 780l/h, weight: approx. 2200kg. Documentation available. On-site inspection is possible. In original packaging. Hfedpfx Aajt Iw Swjbon

Condition: good (used), BIESSE ARROW ATS 5 AXIS NC1000 MACHINING CENTER Machining head with revolver tool change Hodpeukcy Esfx Aabsfn BH39 drilling machine, 250m3 vacuum pump (this machine had been in operation for 10 years in a woodworking school)

Condition: used, functionality: unexamined, Ferwood code: RU0011651 - Manufacturer code: K6343K0949 - Condition: Used - Functionality: Not tested - If interested, we offer reconditioning service, contact us. Hjdpfxjwtnqke Aabsfn

Condition: used, machine/vehicle number: 008112, X axis working area: 3390 mm Y axis working area: 1535 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Hjdow Idgvepfx Aabofn Total number of drilling spindles: 21 Total number of tool changer positions: 14

Condition: used, mileage: 9,31,635 km, power: 228 kW (309.99 HP), first registration: 12/2012, fuel type: diesel, number of seats: 33, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, Euro standard: Euro 5 Mileage according to speedometer Gearbox: Automatic ZF Seats: 30+2+1 high/fixed Standing places: 49 _____ Safety * Retarder Hodpfx Aaevl Ui Esbefn * ABS, EBS * Fog lights * Rear view camera Passenger compartment * Auxiliary heating * Air conditioning * Double glazing * Driver microphone * Stroller space * Wheelchair ramp * Wheelchair space * Stop request Exterior * Matrix * 3x double-width doors * Raising/lowering system * Power steering * Sun visor * Electric exterior mirrors * Roof hatches, ventilation, roof ventilator Audio & communication * Radio * USB port Other * Twin tires * Tires: VA 70%, HA 70%. * Our internal vehicle number: 11241. Subject to errors. Images and text may differ from the vehicle. Always over 300 additional vehicles on offer.

Condition: used, clamping claws, clamping devices, clamping irons, clamping devices, clamps, clamping tools, step clamps, low clamps, clamping irons, power clamps, compact clamps, machine table clamps Hsdpfx Asu Tyuqsabjfn -Manufacturer: Bessey, clamping claws, machine table clamps, pivoting -Type: BS-5 -Wingspan: 260 mm -Number: 3x tensioners available -Price: per piece -Dimensions: 300/80/H370 mm -Weight: 3.0 kg/piece

Condition: good (used), Year of construction: 2012, I sell the 5-axis CNC working centre Biesse Rover C6.40 with beam table, year 2012. Configuration: 5-axis main spindle HSD 15KW/S6 (12KW/S1) / Water cooled Tool magazine 22 positions HSK63 on moving head Drilling head 5+2+2 spindles Useful working area 3400x1570mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Automatic system for outfeed of waste material with band conveyor Additional vacuum outputs for raster works or connection of additional clamping devices. Pump Becker 250/300 m3/h. 5,5KW. Biesse Works software controller with full instructions. Hsdpeq Dkc Sefx Aabsfn Total power 40kW Total weight 5100kg Good condition. Available immediately.

Condition: used, functionality: fully functional, Ferwood Code: RU0001913 - Manufacturer Code: 7130503 - Condition: Used - Functionality: Fully functional - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer an overhaul service, contact us. Hjdpfx Aaev Du R Hebjfn

Condition: used, machine/vehicle number: 007738, X axis working area: 3280 mm Y axis working area: 1600 mm Working Table: Pod and Rail Hodpfjvu If Sjx Aabefn Main Electrospindle power: 13.2 KW Number of controlled axes: 5 axes Total number of drilling spindles: 28 Total number of tool changer positions: 28

Condition: used, functionality: unexamined, Ferwood Code: RU0011646 - Manufacturer Code: K6343K0947 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service, please contact us. Hfedpfx Ajwtnimjabon