Used Ejd 220 for sale (4,990)

Condition: used, mileage: 10,16,268 km, first registration: 03/2011, fuel type: diesel, overall weight: 115 kg, color: white, driver cabin: sleeper cab, emission class: euro5, suspension: air, Year of construction: 2011, RENAULT MIDLUM, TWO-AXLE, WITH WHEELBASE EXTENSION AND RETRACTABLE TAILGATE Fgjdpfozk D Nnex Aptjg

Condition: used, functionality: fully functional, machine/vehicle number: 904xxxxx, Year of construction: 2016, operating hours: 5,255 h, load capacity: 2,000 kg, lifting height: 1,660 mm, free lift: 100 mm, fuel type: electric, mast type: simplex, construction height: 1,350 mm, fork length: 1,190 mm, empty load weight: 942 kg, total length: 2,022 mm, drive type: Elektro, construction width: 726 mm, High-lift pallet truck Chassis number: 904xxxxx Load center: 600 mm Mast type: Standard Transmission: AC impulse Fodpfxexuw Tne Aptogg Condition: Refurbished, without warranty Technical condition: very good Front tires type: Polyurethane Front tire size: Single polyurethane load rollers Rear tires type: Polyurethane Rear tire size: Polyurethane drive wheel Battery voltage: 24V Battery capacity: 250Ah Battery manufacturer: IBV Battery type: PzS Battery year of manufacture: 2025 Description: Serviced, technically and visually refurbished, UVV-inspected, sold without warranty/liability for material defects Impulse control, initial lift Double-deck stacker, 2000 kg as electric pallet truck, 1000 kg as pedestrian stacker, 2 x 1000 kg as double-deck unit, external charger, battery (newly installed 11/2025) with Aquamatik, code lock, discharge indicator, hour meter

Condition: refurbished (used), Year of construction: 2015, operating hours: 2,904 h, load capacity: 2,000 kg, lifting height: 2,010 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,530 mm, battery voltage: 24 V, fork length: 1,200 mm, empty load weight: 731 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN ACTION. Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including drive, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Reach truck data: Manufacturer: Jungheinrich Type: High lift pallet truck EJD 220 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2015 Operating hours: 2,904 Fgodpfxezdi D Dj Aptsg Lifting height: 2,010 mm Mast type: Duplex Free lift: No Initial lift: Yes Overall height: 1,530 mm Fork length: 1,200 mm Unladen weight: 731 kg Load center: 600 mm Tires: Polyurethane Model type: EJD 220 Battery type: PzS Voltage: 24 V Battery weight: 235 kg

Condition: refurbished (used), Year of construction: 2016, operating hours: 2,423 h, load capacity: 2,000 kg, lifting height: 2,010 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,530 mm, battery voltage: 24 V, fork length: 1,200 mm, empty load weight: 747 kg, FRIEDMANN FORKLIFTS – RECONDITIONED BY EXPERTS. FOR PROFESSIONALS IN ACTION. Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection Fodpezdi Agefx Aptjgg * Over 400 vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Reach truck data: Manufacturer: Jungheinrich Type: High-lift pallet truck EJD 220 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2016 Operating hours: 2,423 Lifting height: 2,010 mm Mast type: Duplex Initial lift: Yes Overall height: 1,530 mm Fork length: 1,200 mm Unladen weight: 747 kg Load center: 600 mm Tires: Polyurethane Model type: EJD 220 Battery type: PzS Voltage: 24 V Battery weight: 293 kg

Condition: good (used), Year of construction: 2016, 300mm turning diameter, 510mm turning length, Y axis +/- 52.5mm, 600mm swing, 65mm bar capacity, spindle speed 4,500rpm , Fgsdpfxozzwgnj Aptjg 24 station turret, 15kW spindle motor, milling 6000rpm, C axis 0.001 degrees, sub-spindle speed 6,000rpm, Y axis +/- 52.5mm, Doosan FANUC-i control, tailstock, coolant, tool setter, parts catcher, 3 jaw chuck.

Condition: excellent (used), Year of construction: 2013, Brandt Highflex KDF 220 edge banding machine with joining, corner copying, and two trimming blades. Highly automated. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3mm, solid edge up to 6mm Workpiece height: approx. 10 - 60mm Feed rate: approx. 10m/min Noise protection hood Extendable workpiece support Dust extraction connection: 1x120mm, 1x100mm, 3x80mm Easy-Touch control panel EC+ for simple machine operation 4 programs can be saved. Machine in Highflex version, highly automated, changing from thin edge to thick edge via programs Components: Extended infeed zone Fjdpfx Apozzqwmotegg Chain track central lubrication, pneumatic-manual Glue pot quick-change device, one glue pot currently available Upper pressure, manual adjustment, PU rollers Infeed guide, manual adjustment with SIKO counter for chip removal Jointing cutter with diamond cutters, sharpened Contact heating shoe for preheating the board Gluing section with automatic edge infeed for strip material up to 3mm, switchable for co-rotating and counter-rotating operation Pressure zone with 3 rollers, pneumatic adjustment between thin and thick edge Cut-off saw with 2 motors, straight cut or chamfer cut (program-controlled) Combination milling unit, pneumatically controlled for flush trimming, chamfering, and rounding Corner rounding cutter R2 with diamond cutter with integrated sensing ring Radius trimming blade R2, pneumatically retractable with quick-change device Glue seam trimming blade with large roller, pneumatically controlled Hood locking mechanism CE marking All indexable inserts of the milling units and trimming blades have been renewed or re-sharpened, saws sharpened, diamond jointing cutters sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the profiling cutter has not been renewed, but is still sharp. Original paint, only a few spots have been touched up. Unfortunately, the machine does not have an operating hour counter, but it still looks very good. Very good condition, see original photos. Machine dimensions approx. 4550 x 1250 x 1550mm (LxWxH) Weight approx. 1400kg. The machine can be demonstrated on-site upon request and after arranging an appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Condition: ready for operation (used), Year of construction: 2013, operating hours: 29,764 h, functionality: fully functional, machine/vehicle number: 6640-105136, load capacity: 235 kg, arm reach: 2,550 mm, controller model: IRC5, repeat accuracy: 0.05 mm, number of axes: 6, TECHNICAL DETAILS Load capacity: 235 kg Reach: 2,550 mm Repeatability: ±0.05 mm Axis 1: +170° to -170° Axis 1 optional range of motion: +220° to -220° Axis 2: +85° to -65° Axis 3: +70° to -180° Axis 4: +300° to -300° Axis 5: +120° to -120° Axis 6: +360° to -360° Axis 6 standard rotation range: ±96 revolutions MACHINE DETAILS Fgodpfjzxqcwjx Aptsg Controller: IRC5 Operating hours: 29,764 h EQUIPMENT Manipulator IRC5 controller cabinet All cable sets Teach pendant

Condition: good (used), Year of construction: 2011, operating hours: 15,100 h, functionality: fully functional, CNC turning machine Manufacturer: DOOSAN Type: LYNX 220 G-S Year of manufacture: 2011 Equipped with: FANUC i control system X-axis Y-axis Chip conveyor Fgedezybi Rspfx Apteg Bar feeder magazine LNS Quick Load Servo 65

Condition: used, functionality: fully functional, On offer: FUTURA Krono 220 four-sided planer – 5 spindles, 220 mm The machine is used, has undergone technical inspection, is fully functional, and ready for operation. It can be started and thoroughly inspected at our company's premises before purchase. The machine's greatest advantage is its five-spindle configuration with a fifth rotating spindle that can rotate 360°, providing a wide range of possibilities for planing and profiling wooden components. Separate drive for each spindle, smooth feed speed adjustment, and pneumatic pressure on the rollers ensure stable and precise machining. Specifications: • Manufacturer: FUTURA • Model: Krono 220 • Maximum working width: 220 mm • Maximum working height: 130 mm • Number of spindles: 5 • Spindle arrangement: 4 fixed spindles and a fifth rotating spindle with a 360° range • Spindle diameter: 40 mm • Spindle motor power: 4 × 4.0 kW and 1 × 5.5 kW • Spindle drive: separate motor for each spindle • Feed motor power: 1.5 kW • Total power: 23.0 kW • Spindle motor brakes • Planing height adjustment: electric • Planing width adjustment: manual • Adjustment of the position of vertical spindles: up-down, similar to an inverted milling machine • Lower feed roller in the work table: 1 • Toothed feed roller before the first head • Pneumatic pressure on feed rollers • Feed speed adjustment: smooth, using a variator • Feed speed range: 6–28 m/min • Equipment: complete set of working heads and a cutterhead • Working heads: 3 spiral heads and 1 four-knife head • Infeed table: 2480 × 250 mm • Table lubrication pump • Soundproof cabin • Extraction ports: Ø140 mm • Year of manufacture: 1996 • Weight: approximately 1600 kg • Overall dimensions: 462 × 160 × 156 cm (L × W × H) • Original paint • Complete documentation in Italian • Head wrenches included • Complies with CE requirements Applications: • Four-sided planing of wooden components • Profiling of components using the fifth rotating spindle • Machining of components up to 220 mm wide • Machining of components up to 130 mm high Additional information: • The photos show the actual condition of the machine offered • Free machine operation training at our company's premises • The price stated in the auction applies to export sales/intra-community supply with a VAT rate of 0%; 23% VAT must be added for domestic sales Financing and transport: • We arrange transport using the MDD fleet or through external carriers • We assist in obtaining leasing or loan financing Fgsdozhpg Hepfx Apteg • Delivery costs depend on the destination and the method of transporting the machine

Condition: good (used), Year of construction: 2019, pressure 220 t chamfer lenght 4100 mm distance between columns 4100 mm stroke of upper beam 400 mm dayligth 570 mm working feed 21.0 mm/sec return speed 200.0 mm/sec work height max. 970 mm Control LVD Touch-B CNC 18" total power requirement 37.0 kW weight 27500 kg range L-W-H 5100 x 1950 x 2850 mm well-maintained condition (!!) Special price on request Equipment: - CNC electro-hydraulic press brakes * Intuitive, touchscreen-based user interface * Simple navigation * Tool and program library * X-axis control and position display * Y-axis control and position display * Swiveling control panel (front left) - CNC-controlled - CNC electric backgauge (X-axis) * CNC electric gauge fingers (R-axis) * Includes height adjustment (R-axis) * Intelligent tool storage (automatic tool changing) * Bending aid - LVD upper tool holder * Hydraulic upper tool clamping - LVD lower tool holder * Hydraulic die clamping - Side safety guards (swiveling doors) - Rear safety guard (swiveling door) - 1x movable foot pedal - Machine documentation Fjdpfx Apezu A Rxetsgg ToolCell is a fully equipped hydraulic press brake with an integrated automatic tool changer. It is the ultimate bending solution for small to medium-sized batches, high product variety, and increased workpiece complexity.

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Very good condition. The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm Number of cycles: 18/min Productivity: 900,000 sheets/h Weight: 700 kg The machine is equipped with a hydraulic quick-action unit. Fodpfx Apozmu I Hetegg Photo safety barriers. Adjustable feed table in all directions. Two operating modes: semi-automatic and manual. Tail on the delivery.

Condition: excellent (used), functionality: fully functional, Distance between centers: 1500 mm Center height: 220 mm Fgjdpfjzyyabjx Aptsg Spindle bore: 52 mm Tailstock quill: MK 4 18 speeds: 25 - 2000 rpm Pole-change motor: 2.9 / 5.9 kW with gap bed bridge

Condition: excellent (used), Year of construction: 2008, operating hours: 40,255 h, functionality: fully functional, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal travelling-column machining center. The machine was built in 2008 and was modernized / totally retrofitted in 2022 with Siemens Sinumerik 840D Solution Line control. Equipped with 5-axis simultaneous machining license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel and electronic handwheel. Technical data: Manufacturer: DMG DECKEL MAHO Type: DMF 220 linear Machine type: 5-axis universal machining center / travelling-column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Total Retrofit: Siemens CNC / drive modernization in 2022 Fodpfxeyuzg He Aptegg 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool taper: SK 40 Table load: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Fuse protection: 125 A Supply voltage: 400 V Frequency: 50 Hz AC control voltage: 230 V DC control voltage: 24 V Power-on hours: approx. 40,255 h Spindle / working hours: approx. 13,082 h CNC / drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP control panel: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / licenses: 5-axis simultaneous machining license Axis licenses Operator software license Equipment: Integrated swivelling table / trunnion-type table setup Paper band filter unit Coolant / filter unit Electrical cabinet Full enclosure Working area lighting Siemens control panel Condition: Machine in well-maintained condition Modernized Siemens control and drive technology 5-axis simultaneous machining available

Condition: good (used), Year of construction: 1985, machine/vehicle number: 13981, functionality: fully functional, power: 4.4 kW (5.98 HP), cutting height (max.): 2,200 mm, cutting width (max.): 5,300 mm, saw blade diameter: 300 mm, saw blade bore: 30 mm, rotational speed (max.): 4,750 rpm, total length: 6,300 mm, overall weight: 1,000 kg, Equipment: saw blade guard, Type: Standard 6220 A, Machine No.: 13981, Cutting capacity: 5300 x 220 x 80, Power: 380 V / 50 Hz / 9.2 A, Saw blade: 300 mm, Digital display: vertical and horizontal. Fgjdpfxezzym Do Aptjg

Condition: refurbished (used), Year of construction: 2002, machine/vehicle number: 28668, functionality: fully functional, power: 27 kW (36.71 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 220 t, operating speed: 12 mm/s, table length: 4,000 mm, year of last overhaul: 2025, Equipment: CE marking, safety light barrier, Control:Touch-B Axes:Y,X,R,Z1,Z2,XZ,W and EFL Clamping:wila hydraulic clamping Machine weight: approx. 21000 kg Type: PPEB 220/40 EFL Serial number: 28668 Fgedpfx Apozn Arpeteg Without tools New R axe spindles New belts : Z axes and tilting Machine front side repainted. New venillators inside the heat exchanger. Wila clamping system checked and realigned,two middle segment changed to new ones.

Condition: excellent (used), Year of construction: 2010, Engel Victory 1050/220 Tech with Wittmann W721 robot Year of manufacture: 2010 Injection unit: Screw diameter: 55 mm Shot weight: approx. 480 g Injection pressure: 2053 bar Dosing volume: 511 ccm Clamping unit: Clamping force: 220 t Tie bar spacing: 0x0 mm Platen size: 880x830 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: Tie-bar-less machine Euromap 67 Robot interface Air valve x 3 Fgjdpfxezy Ir Se Aptjg Hydraulic core pull x 3 Control system with hot runner system x 30 Injection unit hardened - bimetal Proportional valve on the injection unit – precise injection Dimensions: Weight: 12200 kg Length/Width/Height: 5.66x1.88x2.10 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Year of construction: 2020, operating hours: 4,707 h, condition: used, 2020 | Geowell Grating 220 | Used Small Equipment | 4707 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 9600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 8 inspection points 8 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Wheelwashing unit , has not been working for a long time , not operationally tested Fgedsznfdbjpfx Aptog 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40943 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 0-261-20-6827, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Type KDF 220 Profiline Year of manufacture: 2012 Units controlled from display Jointing unit: 2 x 2.2 kW Gluing unit A6 End trimming saw unit: 2 x 0.18 kW Flush milling unit: 2 x 0.27 kW Profile milling unit: 2 x 0.35 kW WD 40 Radius scraper Surface scraper Edge thickness: 0.4 - 6 mm Workpiece thickness: 8-60 mm Feed speed: 11 m/min Total power: 16 kW Fgjdpsyy S Adjfx Aptjg Length: 4150 mm

Condition: ready for operation (used), functionality: fully functional, Industrial vacuum cleaner RINGLER RA 220 -Type RA 220 - D 2x2.2 -Power approx. 4 kW -Speed 2850 rpm -Large industrial collection/filter container -High-performance extraction unit Fgsdezy Hfdepfx Aptog -Electrical control with control panel -Industrial suction hose -Floor suction nozzle Dimensions: L x W x H 1.8 x 0.7 x 1.8 meters / Weight approx. 250 kg Errors and omissions excepted.

Condition: used, Year of construction: 2015, functionality: fully functional, Heavy-duty pallet decoiler with integrated precision straightening head, designed to feed coiled strip material into stamping lines and other downstream processing. The large 1500 mm rotating table handles full pallet-mounted coils up to 3000 kg, while the 9-roll straightener (5 lower driven + 4 upper) ensures a flat, stress-relieved strip ready for production. Both turntable and straightener are independently driven via frequency inverters, allowing precise speed and tension control. Ideal for stamping operations where coil material is delivered on pallets rather than mandrels — eliminating the need for separate coil cars and reducing changeover time. Technical Specifications Table diameter 1500 mm Table load capacity 3000 kg Max. table rotation speed 10 rpm Strip speed 10 m/min (at core Ø 300 mm) Stamping direction Left to right Winding direction CW or CCW (selectable) Max. strip thickness 1.5 mm Max. strip width 220 mm Turntable drive motor 2.2 kW, inverter-controlled Fedpjzav Ngsfx Aptjgg Turntable bearing Four-point bearing Straightener head 9 rolls (5 lower + 4 upper) Roll diameter 40 mm Lower rolls All driven Straightener drive motor 0.75 kW, inverter-controlled Electrical connection 3×400V + N + PE, 50 Hz, 16 A Dimensions (L × W × H) 2250 × 1500 × 1700 mm Weight ~750 kg Paint finish RAL 7035 light grey, structured

Condition: excellent (used), functionality: fully functional, plate punches 1. Beil 780-S-St - 3-hole 780/425 - table 1000-1400 4. Beil 425-T-H - 2-hole 425 - table 520-770 Fodpfjztzc Rox Aptjgg 6. Billows- 2 hole 220 - table 860-450 7. Bacher Hand-Table-punch 220 - table 420 x 310 8. Heidelberg SM52 - 425 Register Punch - table 700 x 500 When inquiring, please specify which plate punch you would like us to quote.

Year of construction: 2022, condition: used, Main Dimensions and Capacity Chuck size 165 mm (6.5") Max swing diameter 419 mm (16.5") Max cutting diameter, BOT/VB turret 305 mm (12.0") Max cutting diameter, BMT65 turret 173 mm (6.8") Max cutting length 406 mm (16.0") Bar capacity 44 mm (1.75") Travel and Feed Rates X axis 200 mm · rapid 12.0 m/min Y axis ± 51 mm · rapid 12.0 m/min Z axis 406 mm · rapid 30.5 m/min Spindle and Sub-Spindle Fjdpfx Apozz H Nrotegg Main Spindle Spindle nose A2-5 Power 11.2 kW (15 hp) Max speed 6,000 rpm Max torque 102 Nm @ 1,300 rpm Drive Belt drive Sub-Spindle (A2-5) Sub-spindle rated at 6,000 rpm with an A2-5 spindle nose, for finish-machining the second side of the workpiece. Part off-loader included. Compatible with an automatic part loader (APL) for loading/unloading from the main spindle. Turret and Tooling Turret 12-station hybrid (6x VDI40 + 6x BOT) Live tooling 4,000 rpm, with C axis Bar Feeder – Haas Bar Feeder V2 Bar diameter 9.5–79.4 mm Bar length up to 1,219 mm Installation kit For 44 mm bar capacity (9–38 mm liners) included Weight 408 kg Control and Connectivity ● Haas NextGen control with touchscreen ● 1 GB onboard program memory ● Ethernet interface and WiFi connectivity ● HaasConnect – remote machine monitoring ● HaasDrop – wireless file transfer from a mobile device ● Visual Part Programming System plus user-definable macros Additional Equipment Included ● Coolant tank, 114 liters, with pump ● Hydraulic chuck, 165 mm, A2-5 ● Bolt-on tool holder kit ● Automatic parts probe (manual and automatic mode) ● Chip conveyor, hinged-belt type ● CNC control cabinet cooler ● Air blast on chuck and air jet on sub-spindle ● Parts catcher system for unattended machining ● Rigid tapping (synchronized, up to 8x feed-back speed) ● Spindle orientation ● Power outage detection module ● Lifting eyes for machine transport ● Metric measurement units Weight and Electrical Machine weight 3,584 kg Electrical connection 220 VAC / 40 A or 440 VAC / 20 A, 3-phase Air requirement 113 l/min @ 6.9 bar (min 5.5 bar)

Year of construction: 2018, condition: like new (used), functionality: fully functional, machine/vehicle number: M.66999.999.92, Take advantage of this unique opportunity to acquire an immediately available, like-new machine from the world-renowned premium manufacturer FRIMO. This is a fully assembled and 100% operational special machine for thermoforming/vacuum lamination, which, due to a cancelled project, never went into series production and is therefore in like-new condition. Machines of this type are often found in the premium automotive sector worldwide. One of the special features of this machine is its large forming area of up to 1,200 x 2,200 mm and its very flexible range of applications, due to its modular design and many special functions. Detailed description: Versatile ECO single-station laboratory machine or ECO single-station in-line machine for series production. Depending on the application, whether as a laboratory machine or for series production in in-line operation, and depending on the type of frame (fixed or adjustable frame), the maximum available forming area is defined. Forming areas: (with currently available frames) In-line operation: 810 x 2,205 mm (min. 465 x 490 mm) Single-station operation: 970 x 1,970 mm (min. forming area, linear: 465 x 490) With newly manufactured frame: Single-station frame, fixed: 1,200 x 2,200 mm & single-station frame, adjustable: 1,130 x 2,200 mm Linear frame, fixed: 1,200 x 2,200 mm & linear frame, adjustable: 900 x 2,200 mm Maximum lower tool or molded part height: 470 mm Maximum tool package height for installation with upper tool: 800 mm (821 mm) Maximum upper tool height: 650 mm Number of upper platens (molds and dies): 2 Machine equipment: - Movable heater - Chain rail for automatic film feed - Clamping frame or series frame can be used Different heaters available for interchangeable use, depending on requirements: - R5 0302 D vacuum pump (300 m3/h) - 1000 L vacuum tank - 6 cooling fans DNG 6-22.5 for accelerated cooling times (including cooling air with water cooling) - Maximum lifting capacity of lower and upper tools: 4,000 kg each 1.) IR heater (Ushio) 2.) Quartz heater (TQS) (Depending on the process and material, with its specific advantages) If you have any questions, please do not hesitate to contact us. Sincerely / Best regards Fgedpfxszd Unbe Aptog i.V. Alexander Reizner Sales and Project Management Service FRIMO Innovative Technologies GmbH

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, We offer this ready for use Rösler R 220 EC vibratory finishing machine, year of construction 2012. Manufacturer: Rösler Model: R 220 EC Year of construction: 2012 If you have any questions or need more information, feel free to send us a message or give us a call. Fsdeyb Rrfjpfx Aptegg

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 33407, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 220 t, stroke length: 300 mm, operating speed: 21 mm/s, reverse speed: 200 mm/s, table length: 3,050 mm, throat depth: 400 mm, ram plate length: 3,000 mm, distance table to ram: 570 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, total length: 5,700 mm, total width: 2,100 mm, total height: 3,685 mm, overall weight: 14,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Technical specifications Force: 2200 kN Working length: 3000 mm Distance between uprights: 2600 mm Stroke: 300 mm Distance table – ram: 570 mm Gap: 400 mm Turbo PP5400 Approach speed: 120 mm/s Working speed: 21 mm/s Fedpfxszkxqms Aptegg Return speed: 200 mm/s Weight: 13500 kg Motor: 37 kW Oil: 350 L Weight: 14500 kg LxWxH: 5700 x 2100 x 3685 mm Table: PP8170 V-axis  EFL 130 PP8303 Upgrade 2026  Top tool clamping: PP3090 – Wila  Hydraulic top tool clamping: PP3100  PP3160 hydraulic clamping V-dies  Back gauge: PP8251 XRZ modules: X1000  Security; CE: PP3580 – lasersafe  PP8402 T1 T2