Used Atlas 1305 M for sale (475)

Year of construction: 2020, condition: ready for operation (used), A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range: 2-6 compressors. Oil-water separation system Beko ÖWAMAT 15, throughput range: 6m³-30m³/min, oil outlet: DN40, container volume: 115.5l, filling volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16bar, machine dimensions X/Y/Z: approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8656h, controller hours: 42334h. Documentation available. An on-site inspection is possible. Iodpfxsxdc Uvs Aabetn

Condition: used, mileage: 1,001 km, color: orange, driver cabin: other, gearing type: other, Year of construction: 1991, first registration: 01/1991, Equipment: cable winch, crane, Vehicle location: Bovenden, demountable, emergency stop, grab control, foldable, hydraulic 2-point support, radio remote control, 2x hydraulic extensions, cable winch. Body: Demountable rear crane ATLAS 60.1-6,5/2 (A2) with 2 hydraulic extensions, winch, and grab control. Crane with radio remote control: 2.6 m 2.55 t, 6.4 m 0.9 t, 9.4 m 0.38 t. Approx. €3,000.00 was invested in 2023 for servicing and radio system on the crane! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors! Ijdpjxdbxasfx Aabetn

Year of construction: 2020, condition: new, machine/vehicle number: 311345882, Atlas Copco Secoroc DTH drill pipe 102 114mm unused 4x 102mm / L= 5000mm 4x 114mm / L= 6000mm Isdpemwittsfx Aabjtn 3x shank adapters 114mm 1x drill bit 140mm Additional information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: excellent (used), Year of construction: 2020, operating hours: 41,403 h, functionality: fully functional, Premium screw compressor Atlas Copco GA90VSD+. 90 kW with 13 bar and 18.30 m3/min. Frequency controlled. Year of manufacture 2020 with approximately 41,403 hours. Itedpfjw Rlfrox Aaben

Condition: like new (used), functionality: fully functional, overall weight: 749 kg, fuel type: electric, total length: 2,765 mm, total width: 1,346 mm, total height: 1,435 mm, power: 37 kW (50.31 HP), volume flow: 6.6 m³/h, pressure (min.): 5 bar, pressure (max.): 12 bar, ambient temperature (max.): 50 °C, noise level: 61 dB, type of cooling: water, Year of construction: 2023, machine/vehicle number: APP876730, The Atlas Copco E-Air H250 VSD is a single-stage, oil-injected screw compressor driven by an Atlas Copco electric motor with class H insulation and a speed of up to 9000 rpm. Unique to this new range is the PACE functionality in conjunction with the intuitive XC2003 control system. This ground-breaking technology enables multiple pressure and flow settings, allowing you to adjust the airflow and pressure to suit the requirements of your application. The E-Air VSD motor is characterized by its compactness, energy efficiency and quietness. In addition, the compressors are easy to install and operate. No exhaust fumes, unrivaled performance, low noise level. A plug-and-play design also allows you to transport the E-Air anywhere. Warranty for demonstration unit: 12 months from delivery Scope of delivery of the compressor: - Integrated permanent motor from Atlas Copco - Soundproofed HardHat hood - Cooling circuit with aftercooler - Air and compressed air connection - Air/oil separator and control systems - Leak-proof frame made of ASTM A653 Zincor sheet steel with powder coating - Closed floor pan - Undercarriage/chassis with fixed drawbar and hydraulic brakes - Overrun and parking brake, automatic reverse, star wheel - Truck DIN towing eye (40 mm), car coupling enclosed loose - 205R14C wheels for trailer operation Ijdpfsud H Tnsx Aabotn - Lighting and operating license according to StVZO

Condition: used, Used 2 MW wood biomass power plant built in 2009 and running until February 2023. Plant is made up of a steam boiler that uses forest waste as fuel and a condensing steam turbine generator, electrical room, control room. Ijdpfx Aaew U A Hhebjtn Main equipment includes: - Biochamm BCV-11.0000 CA biomass boiler built in 2008 with approximately 23,665 hours of use. - Boiler feed system made in 2008 with approximately 22,549 hours of use. - Atlas Copco compressors made in 2008. - Water treatment plant made in 2008. - Hamworthy condenser made in 2008 with 22,539 hours of use. - Siemens SST-110 (TWIN AFA46 GT6) steam turbine made in 2008, with 22,539 hours of use and 563 starts. - Leroy Somer L57 54 m7/41 alternator made in 2008 with 22,539 hours of use. - EWK cooling towers made in 2008 with approximately 23,102 hours of use. - Fivemasa HVAC made in 2008. Available for relocation or in-situ with land and buildings.

Condition: used, Year of construction: 2011, operating hours: 8,100 h, functionality: fully functional, overall weight: 2,532 kg, fuel type: diesel, color: grey, type of output current: three-phase, nominal power (apparent): 150 kVA, total length: 3,500 mm, total width: 1,200 mm, total height: 1,600 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Volvo 6-Zylinder, type of cooling: air, Manufacturer: Atlas Copco Type: QAS 150 Condition: Very good Engine: Volvo Diesel Power: 150 kVA RPM: 1500 rpm Frequency: 50 Hz Itjdpfx Aaowz U T Ijbjn Voltage: 230 / 400 V Operating hours: 8,063 h Year of manufacture: 2011 Incl. batteries Incl. diesel tank integrated in the base frame Weight: 2,532 kg The video is from the dealer where the generator was purchased. The photos are our own.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: API621725, For sale: Atlas COPCO ZR 132 compressor with filters, 125 KW Ijdswrm T Iopfx Aabetn

Condition: new, overall weight: 340 kg, Atlas Copco G11FF screw compressor Specifications: - condition - New - manufacturer - Atlas Copco - capacity - 1440 l/min - main engine power - 11,0 kW - tank - 500 l - maximum operating pressure - 10.00 atm - built-in refrigeration dryer - electronic setting of compressor operating parameters - soundproofed cabin (only 67 dB) - meets CE standards Iedpfx Aoh Unupjabetn - weight - 340 kg Additional information: - possibility to obtain a manufacturer's warranty after commissioning by an authorized Atlas Copco service center - instruction manual in Polish and a set of documents for the Office of Technical Inspection - available immediately or within 7 working days

Condition: excellent (used), Year of construction: 2003, operating hours: 38,508 h, functionality: fully functional, 160 kW, 10 bar with 24.60 m3/min. Year of manufacture 2003 with around 38,000 operating hours. Itodpfx Aasw I N Nveben

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: APF271056, total width: 960 mm, total length: 1,770 mm, total height: 2,590 mm, overall weight: 1,720 kg, operating pressure: 10 bar, pressure dew point: -40 °C, warranty duration: 24 months, input voltage: 400 V, The dryers in the BD 360+ to 1260+ series are heat-regenerating adsorption dryers that remove moisture from the compressed air via an adsorption process. All dryers in this series are equipped with an innovative Smart Cycle control algorithm as standard. This results in significant energy savings at partial load without the need to add an expensive option. All components are mounted on a common base frame, fully wired and ready for installation, with the vessel and pipework generously sized to minimize pressure drop in the dryer. The dryer can introduce dry air with a low pressure dew point of -40°C or -70°C (optional) into the compressed air system. Pre-configured including the following optional extras: - Pressure dew point sensor - Tank insulation - Fan filter New goods with 24 months warranty from date of delivery. Itedpfxjt It N So Aabon Optionally also available with installation and commissioning, ex warehouse Wettenberg.

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2014, operating hours: 3,500 h, Atlas Copco XAS97 Compressor – 2750 rpm – 7 Bar – 36 kW – Weight 1060 kg – = Further Information = Itedpfx Asxcyb Roaben Year of manufacture: 2014 Intended use: Construction Contact Miguel Cubas for more information. = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the Port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: ready for operation (used), Year of construction: 2007, 37KW 12.5 bars Iodpfx Aaevr S H Uebjtn

Condition: used, mileage: 1,001 km, color: orange, driver cabin: other, gearing type: other, Year of construction: 2000, first registration: 01/2000, Equipment: central locking, crane, Vehicle location: Bovenden, emergency stop, grab control, 2-point hydraulic outriggers, radio remote control Superstructure: Atlas AK 90.1 HDS A15 loading crane with radio control Crane has been little used! Load diagram: 6,5m-970kg! Can be extended to 8.0m-780kg for an extra charge. ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Itsdsxbfxlopfx Aabsn - .

Condition: like new (used), Year of construction: 2023, operating hours: 900 h, functionality: fully functional, machine/vehicle number: API929281, overall weight: 876 kg, total length: 1,400 mm, total width: 1,400 mm, total height: 2,300 mm, space requirement length: 3,000 mm, space requirement width: 2,200 mm, space requirement height: 3,500 mm, motor manufacturer: Atlas Copco, power: 55 kW (74.78 HP), fuel type: electric, volume flow: 11.3 m³/h, operating pressure: 7 bar, pressure (max.): 13 bar, As-new Atlas Copco compressor GA55 VSD+ Location: Wipro Pari GmbH Am Gewerbepark 4 Isdpfxjw U N N As Aabstn 94121 Salzweg Tel.: +49 160 958 206 70

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: AII 234242, overall weight: 385 kg, volume flow: 149 m³/h, operating pressure: 7 bar, Previously used for grit blasting, after renovation (oils, filters, control panel), tested and then set aside, the compressor is for sale in the condition shown in the pictures. The machine is in Szombathely, we can also help with loading (ramp, forklift). It can be sold without VAT within the EU, it is sold with an invoice. Ijdewra Hbjpfx Aabstn

Year of construction: 2017, condition: used, Air dryer Weight 128 kg Compressed air pressure 13 max Ambient temperature max 46°C Itsdpew Da Ensfx Aabon

Condition: excellent (used), ATLAS scissor lift table, lifting capacity 4 t TECHNICAL PARAMETERS: German production table size 3000 x 1200 mm lifting capacity 4000 kg height of the unfolded table 1195 mm height of the folded table 450 mm Ijdpfx Aajma Ekaebjtn pump motor power 4 kW table weight 1500 kg

Condition: good (used), I sell the screw compressor: Atlas Copco GA208 PACK Motor - 18,5kW, Power - 2,6 m3/min., Pressed air max.8 bar Dimensions 2200 x 1140 x 1250 mm 38370 working hours Iodpsmk E Drsfx Aabjtn All working.

Condition: excellent (used), Year of construction: 2018, operating hours: 18,194 h, functionality: fully functional, Screw compressor Atlas Copco GA315FF. 315 kW with 8.3 bar and 57.20 m3/min. Integrated dryer. Year of manufacture 2018 with only 18,000 hours. Ijdpfow Icn Esx Aabotn

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: SF22+, overall weight: 687 kg, power: 22 kW (29.91 HP), volume flow: 144 m³/h, operating pressure: 8 bar, Atlas Copco compressor SF22+ dryer CD45+ set Oil-free compressed air compressor Pressure: 8 bar Capacity: 2.4 m³/min 22 kW Weight: 687 kg Year of manufacture: 2024 Isdpfxjxby H Dj Aabjtn Unused compressor and dryer set All employees speak Dutch, German, and English Prices are exclusive of VAT Shipping possible (subject to extra charges) (Changes and errors in technical data, information, and pricing as well as prior sale reserved)

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: AII 471146, GA 75 screw compressor Ijdpfx Aot Du Syeabjtn Maximum operating pressure: 10 bar Compressed air production: 192 l/s Power: 75kW Speed: 3000 r/min Weight: 1550kg

Condition: excellent (used), Year of construction: 2009, ATLAS COPCO GA55VSDFF Screw Compressor 55kW 2009 ATLAS COPCO GA55VSDFF screw compressor – unit with inverter, air dryer, and heat exchanger after service. Technical data: Itedpova A Hnjfx Aabon Capacity: 10.3 m3/min; Motor power: 55 kW; Max pressure: 12.8 bar; Year: 2009 Operating hours: 12,483h!!! The compressor is fully operational, ready for work, with warranty. Service support provided.

Condition: new, Atlas Copco ROTO Synthetic Fluid FOODGRADE 20 liter container Also available in 5 liter containers From stock sale We are on vacation until 06.01.. Your request will be processed afterwards. Itjdpovkf A Hjfx Aabsn Warranty and returns are excluded from this advertisement.

Condition: used, Year of construction: 2003, Two-way excavator designed for loosening excavated material for storage or transport. The machine is used in the following works: - on railway and tram tracks - maintenance and track-related works - earth and road works Manufacturer: ATLAS Model: 1604 KZW Iodpfx Aaohutkfjbetn Year of production: 2003 Own weight: 22,000 kg Dimensions: 5.9x2.5 m, h: 3.0 m Engine power: 90 kW Equipment: - air conditioning - Webasto heating - three-fold arm - front and rear hitch - additional output for a pneumatic hammer - reversing camera - four hydraulic side supports - Joystick control Technical condition: used, functional