Used Atlas Copco Ga 11 Ff for sale (388)

Year of construction: 2008, condition: ready for operation (used), Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible. Gujdpfxoxmkc Ts Aabeh

Condition: ready for operation (used), functionality: fully functional, power: 168 kW (228.42 HP), fuel type: diesel, color: yellow, overall weight: 16,600 kg, chain condition: 70 %, Year of construction: 2012, operating hours: 6,921 h, Equipment: air conditioning, cabin, Year of manufacture: 2012 Hammer operating hours: 6,921 h Total operating hours: 17,063 h Enclosed cab Air conditioning Rear view camera 6 drill rods (complete set) Gjdjxhchwjpfx Aabeuh Drill bit with diameter of 85 mm Fuel filling pump CAT C7.1 Tier 4 Final engine with 168 kW CE/EPA Undercarriage 70% remaining Only one previous owner, always fully serviced Manufactured in Sweden Operating weight: 16.6 t Additional information: Drill holes from 64 mm to 127 mm possible Max. drilling depth: 37 m.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, We offer Atlas Copco compressors TYPE GA 55 Pressure 10 bar Motor 55 kW Year 2000 Gusdpjwa Iz Aofx Aaboh Compressor with documentation We also have other compressors from Atlas Copco, Kaeser, and Mahle

Condition: good (used), Year of construction: 2004, machine/vehicle number: A II 151768, Offer 25979 - Operating hours 16550 h - Operating pressure 10 bar - Delivery rate 15.9 l/s - Drive 400 V / 7.5 kW Guedpfx Aowrcq Nsabjh - Motor speed 3000 rpm - Air tank 250 L - Required space approx. W 700 x H 1830 x D 1050 mm - Weight approx. 250 kg

Condition: good (used), Year of construction: 2009, operating hours: 63,000 h, functionality: fully functional, machine/vehicle number: API 656 564, overall weight: 1,213 kg, total length: 2,000 mm, total width: 1,300 mm, total height: 1,968 mm, power: 90 kW (122.37 HP), fuel type: electric, pressure (min.): 3 bar, pressure (max.): 13 bar, noise level: 74 dB, type of cooling: air, Equipment: documentation/manual, type plate available, The system was used to operate dry ice blasting equipment. A 5,000-liter tank was connected upstream and is included in the offer. After our relocation, the system was no longer put into operation. Guedpfx Aoxd Umqjabeh The system additionally features a water heat exchanger, allowing the waste heat to be used for heating.

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: AII 234242, overall weight: 385 kg, volume flow: 149 m³/h, operating pressure: 7 bar, Previously used for grit blasting, after renovation (oils, filters, control panel), tested and then set aside, the compressor is for sale in the condition shown in the pictures. Guedswra Hbjpfx Aabsh The machine is in Szombathely, we can also help with loading (ramp, forklift). It can be sold without VAT within the EU, it is sold with an invoice.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: AII 471146, GA 75 screw compressor Maximum operating pressure: 10 bar Compressed air production: 192 l/s Power: 75kW Gjdpfxjt Du Syo Aabouh Speed: 3000 r/min Weight: 1550kg

Condition: used, Year of construction: 1996, functionality: fully functional, overall weight: 389 kg, We offer 3 air compressors manufactured by Atlas Copco. All technical detils on request. Godpsww Ei Ssfx Aabjuh

Condition: good (used), Year of construction: 2000, functionality: fully functional, Pressure: 7.5 bar. Power: 136 kW. Rotational speed: 1488 r/min. Equipped with ATLAS COPCO ER S-4 Energy recovery unit (2012) Guodpfx Aexbctmjabeh

Condition: used, Year of construction: 2010, functionality: fully functional, Manufacturer: Atlas Copco Manufacturing year: 2010 Type: ZT132VSD-FF Power: 132kW/50Hz Gedouh N S Iopfx Aabouh Max. pressure: 8.6 bar Air delivery: 19.5 m³/min Operating hours: 71 979 h Dimensions: 4040mm L x 1650 W x 2000 H Net weight: 3700 kg

Condition: ready for operation (used), Year of construction: 1992, Two peripheral devices for an injection moulding facility are available. 1) Compressor Atlas Copco GA 15, year of manufacture: 1992, air flow rate: 28.2l/s, motor power: 15kW. 2) Dryer Atlas Copco FD 40, operating pressure: 20bar. Documentation available. An on-site inspection is possible. The machines are ready for loading. Sale of individual units is possible. Gujdpfx Ajw R Uzcoaboh

Condition: reconditioned (used), Year of construction: 2007, operating hours: 25,679 h, functionality: fully functional, machine/vehicle number: API510496, overall weight: 1,120 kg, total length: 2,041 mm, total width: 970 mm, total height: 1,802 mm, power: 37 kW (50.31 HP), pressure (max.): 7.3 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Technical data: Model: Atlas Copco GA37+ FF Power: 37 kW (50 HP) Air flow: 7.09 m³/min Maximum pressure: 7.3 bar Cooling: Air-cooled Year of manufacture: 2007 Guodpfxjwtntlj Aabsh >> Operating hours Total hours: 25,679 h Load hours: 6,340 h Motor starts: 298,730 Number of load cycles: 717,977 >> Reconditioning work performed: Complete inspection (screw block, motor, modules) Replacement of consumables (filters, oil, etc.) On-load performance tests Cleaning & final quality check >> Warranty & Delivery: 6-month warranty (parts and labor) Delivery: 2–3 weeks after order >> Price: €6,000 net (excluding VAT)

Condition: excellent (used), Year of construction: 2000, Atlas Copco GA Compressor 136 kW Year: 2000 Gsdpfxsu Thw Rj Aabjuh Operating hours: 60,150 Load hours: 22,097

Condition: ready for operation (used), Compressor GA-55 - maximaal 10 bar - 131 liter/sec bij 8 bar = 50,7 kW - 129 liter/sec bij 9,5 bar = 56,3 kW - gewicht: 1600 kg - afmetingen: 2590 x 912 x 1790 mm Droger FD130 - 132 liter/sec bij 3° C - 165 liter/sec bij 6° C - 186 liter/sec bij 10° C - maximaal 20 bar - gewicht: 200 kg Gujdswxz D Ispfx Aabeh - afmetingen: 1419 x 686 x 928 mm

Year of construction: 1988, condition: good (used), A complete Atlas Copco air compressor including Donaldson Ultra Filter and a Tank in good working condition Gujdpfx Ashpx U Aeaboh

Condition: excellent (used), Year of construction: 2016, Atlas Copco SF8 + FF Oil Free Air Compressor Godpfev D Hayjx Aabeuh This is a Used Atlas Copco SF8+FF Oil Free Scroll Air Compressor manufactured in 2016. SF+ 8 multi-scroll units bring in the benefits and flexibility of a modular system utilizing two to four compressor modules integrated into one canopy. The Elektronikon® continuously monitors the status of each element and starts and stops the compression elements, thereby ensuring that the compressed air output matches the air demand. Moreover, the perfect air quality and user-friendliness of these units guarantee a superior production process. Manufacturer: Atlas Copco Model: SF8 + FF HC Year: 2016 Capacity: 0,68m3/h Installed Power: 7,4 kW Noise Level: 63 dB Max. working pressure: 9,75 bar Machine Dimensions LxWxH: 1.700x760x1.850 mm Machine Weight: 457 kg.

Condition: excellent (used), Year of construction: 1991, overall weight: 1,000 kg, volume flow: 6.72 m³/h, operating pressure: 75 bar, input voltage: 400 V, ATLAS COPCO GA 45 screw compressor With refrigerant dryer 45 kw engine Capacity 6.72 m3/min Godpfx Aoukvvaeabjuh Pressure 7.5 bar The compressor is fully functional.

Year of construction: 2017, condition: like new (used), machine/vehicle number: API801175, Item number MA1131 Manufacturer Atlas Copco Gedpfxeh Ed S Se Aabeuh Type AQ22VSD Year of manufacture 2017 Machine no. API801175 Length [mm] 2000 Width [mm] 1050 Height [mm] 1500 Weight [kg] 800 Connected load 380 V / Operating hours [h] As new 76 operating hours Gear [rpm] 6700 Equipment The compressor is water-cooled and the air is absolutely oil-free Operating instructions ,New price 56350€, special price 27500€

Condition: good (used), Year of construction: 2002, operating hours: 197 h, SCREW COMPRESSOR GA 18 + 7.5P Serial number: 272265 Operating hours: 197 Operating hours The integration of Atlas Copco GA compressors directly into the production area ensures a reliable flow of compressed air directly to the place of use. This makes it possible to dispense with a separate compressor room or an expensive and complex piping system. GA compressors are designed to offer maximum efficiency and ensure constant and reliable production. Premium screw compressor Fully automatic, internally fully piped and wired compressor, single-stage oil-injected compression, air-cooled, sound-insulated. Aftercooler with integrated water separator and electronic condensate drain for cool and relatively dry compressed air Compressor control system Elektronikon II Technical data Manufacturer: Atlas Copco Type: GA 18+ 7,5P Rotary screw compressor Max. Operating pressure: 7.5 bar Free air flow: 54.3 I/s Volume flow: 3.51m³/min Nominal shaft power kW 18.5 Shaft speed: 3000 r/min Oil/water separator: Öwamat Reference conditions Intake pressure: 1 bar Intake temperature: 20 °C Relative humidity: 0 % Usable volume flow at the outlet of the compact system in accordance with ISO 1217-3, C at operating overpressure 7.5 bar 58.5 Is: 3.51m³/min Nominal motor power: 18 kw Nominal motor speed: 2940 min Shaft power requirement of the motor Godpfxowbti Is Aabouh at maximum operating overpressure: 21.1 kW Shaft power requirement when idling: 4.9 kW Compressed air temperature after the aftercooler: 25 degrees Cooling air volume: 1.15 m³ Oil filling quantity: 7.6 l Residual oil content:

Condition: used, Year of construction: 2004, Technical details: Gedpfsu Szluox Aabeuh feed pressure: 9,75 bar liter capacity: 10,1 l total power requirement: 5,5 kW volume capacity: 10,1 m³/min. Number of working hours: 26071 h revolutions per minute of the motor:: 3000 U/min. protection class: CE 0038 machine weight approx.: 310 kg dimensions L x W x H: 1,2 x 0,6 x 1,0 m Condensate separator installed. Restriction: Overload valve does not switch off automatically. For sale as is. *

Condition: good (used), Year of construction: 2002, SCREW COMPRESSOR GA 18 + 7.5P Serial number: 272262 Operating hours: Only 1 operating hour The integration of Atlas Copco GA compressors directly into the production area ensures a reliable flow of compressed air directly to the place of use. This makes it possible to dispense with a separate compressor room or an expensive and complex piping system. GA compressors are designed to offer maximum efficiency and ensure constant and reliable production. Premium screw compressor Fully automatic, internally fully piped and wired compressor, single-stage oil-injected compression, air-cooled, sound-insulated. Aftercooler with integrated water separator and electronic condensate drain for cool and relatively dry compressed air Compressor control system Elektronikon II Technical data Manufacturer: Atlas Copco Type: GA 18+ 7,5P Rotary screw compressor Max. Operating pressure: 7.5 bar Free air flow: 54.3 I/s Volume flow: 3.51m³/min Nominal shaft power kW 18.5 Shaft speed: 3000 r/min Oil/water separator: Öwamat Godpswbr Uisfx Aabouh Reference conditions Intake pressure: 1 bar Intake temperature: 20 °C Relative humidity: 0 % Usable volume flow at the outlet of the compact system in accordance with ISO 1217-3, C at operating overpressure 7.5 bar 58.5 Is: 3.51m³/min Nominal motor power: 18 kw Nominal motor speed: 2940 min Shaft power requirement of the motor at maximum operating overpressure: 21.1 kW Shaft power requirement when idling: 4.9 kW Compressed air temperature after the aftercooler: 25 degrees Cooling air volume: 1.15 m³ Oil filling quantity: 7.6 l Residual oil content:

Condition: good (used), Year of construction: 2002, SCREW COMPRESSOR GA 18 + 7,5P Item is available 3x, in the following options 1x serial number: 272261 Operating hours: 1492 Price: 5035€ 1x serial number: 272265 Operating hours: 197 Price: 5875€ 1x serial number: 272262 Operating hours: 1 Price: 6295€ The integration of Atlas Copco GA compressors directly into the production area ensures a reliable flow of compressed air directly to the place of use. This makes it possible to dispense with a separate compressor room or an expensive and complex piping system. GA compressors are designed to offer maximum efficiency and ensure constant and reliable production. Premium screw compressor Fully automatic, internally fully piped and wired compressor, single-stage oil-injected compression, air-cooled, sound-insulated. Aftercooler with integrated water separator and electronic condensate drain for cool and relatively dry compressed air Elektronikon II compressor control system Gjdpfxjuyg S Ee Aabjuh Technical data Manufacturer: Atlas Copco Type: GA 18+ 7,5P Screw compressor Max. Operating pressure: 7.5 bar Free air output: 54.3 I/s Volume flow: 3.51m³/min Nominal shaft power kW 18.5 Shaft speed: 3000 r/min Oil-water separator: Öwamat Reference conditions Suction pressure: 1 bar Intake temperature: 20 °C Relative humidity: 0 % Usable volume flow at the outlet of the compact system according to ISO 1217-3, C at operating overpressure 7.5 bar 58.5 Is: 3.51 m³/min Nominal motor power: 18 kw Nominal motor speed: 2940 min Shaft power requirement of the motor at maximum operating overpressure: 21.1 kW Shaft power requirement at idle: 4.9 kW Compressed air temperature after the aftercooler: 25 degrees Cooling air volume: 1.15 m³ Oil filling quantity: 7.6 l Residual oil content:

Condition: excellent (used), Year of construction: 2016, operating hours: 13,000 h, functionality: fully functional, power: 45 kW (61.18 HP), fuel tank capacity: 2,000 l, operating pressure: 10 bar, type of cooling: air, Complete compressed air system consisting of: Atlas Copco Compressor GA15VSD+ Year 2016, approx. 13,000 hours – 15 kW – Max 13 BAR Atlas Copco Refrigeration Dryer FX8 Year 2020 MaBe 500L Tank Year 2011, height approx. 2.15 m Almig AKC300 Activated Carbon Adsorber incl. Condensate Drain Valve SPX Flow Technology EDDSU2 The system is fully functional and has been regularly maintained. Already dismantled and packed on a pallet. Very good condition, see pictures. Forklift available for loading. Guedpfx Aowz Ul Doabeh Collection only by appointment in 75053 Gondelsheim. Shipping by freight forwarder possible, please inquire with postcode.

Condition: ready for operation (used), Year of construction: 2006, functionality: not functional, machine/vehicle number: GA37 AEL.||ff, type of cooling: air, The machine in the image is an Atlas Copco GA37 air compressor. ## Key Details: - *Model*: GA37 - *Manufacturer*: Atlas Copco - *Type*: Air compressor - *Location*: Outdoors, against a white wall, covered partially with a tarp - *Condition*: Appears to be in a somewhat neglected or storage state, with debris around it Gedexdr Ufopfx Aabsuh

Condition: ready for operation (used), functionality: fully functional, Atlas Copco FD 118 – Technical specifications (indicative) Type of device: Compressed air refrigeration dryer Air flow: Approx. 118 l/s (m3/min depending on version) Working pressure range: Usually up to 16 bar Dew point temperature: +3°C Power supply: 400V / 50Hz (other variants may be available) Refrigerant: R410A or R407C (depending on year) Nominal power: Approx. 1-2 kW Weight: Approx. 100-150 kg Guodpfx Aaov Duzfsboh