Screw compressor

Atlas COPCO GA75 VSD

Condition: excellent (used), Year of construction: 2005, operating hours: 33,500 h, functionality: fully functional, Inverter compressor with integrated dryer. Fully functional. Approximately 23,000 operating hours. Main features: Max pressure: 13 bar Power: 75 kW – 100 HP Cpjdpfx Aoxvcdnjgkew Output per min: approx. 12,500 l

Condition: ready for operation (used), functionality: fully functional, 2900 werkuren!!! Diesel-oil (1) -- Naphte (2) -- Electr (3): electric voltage: 3 x 380V - 50Hz Low press. (1) High press (2) Screw (3): 12.75 bar screw compressor Volume flow rate: 18.3 m3/min Power imput: 90kW Volume (L): 1500 L Codjxl Hxbepfx Agkopw

Condition: excellent (used), Year of construction: 2017, operating hours: 26,862 h, functionality: fully functional, Atlas Copco GA75VSD screw compressor. Integrated frequency inverter. 75 kW with 13 bar and 15.09 m3/min. Equipped with heat recovery system (WRG). Cjdpeyllp Hjfx Agkepw

Condition: excellent (used), Year of construction: 2013, operating hours: 20,900 h, functionality: fully functional, overall weight: 4,500 kg, power: 45 kW (61.18 HP), fuel tank capacity: 2,000 l, operating pressure: 10 bar, type of cooling: air, Complete compressor room Atlas Copco GA75VSD, built in 2013, 46,100 hours - 75 kW - Max. 10 bar Dimensions: L225 x W110 x H195 cm Atlas Copco GA45+, built in 2007, 21,000 hours - 45 kW - Max. 10 bar Dimensions: L205 x W100 x H180 cm Atlas Copco FD245, built in 2013, refrigeration dryer Dimensions: W120 x D110 x H100 cm Dimensions: 2000L tank, built in 2016, height 2.85 m Incl. oil-water separator Codpfxjv Snn Io Agkopw System is currently still in operation; operating hours may vary. System is fully functional and regularly maintained. Maintenance kits and oils are included. Very good condition, see pictures. A forklift is available for loading. Pickup by appointment only in 75053 Gondelsheim. Shipping via freight forwarder is possible; please include your postal code in your inquiry.

Condition: excellent (used), Maximum machinable diameter above the bed: 575 mm Maximum machinable diameter above the slide: 525 mm Maximum machinable diameter above the small cross slide: 300 mm Distance between centers: 2000 mm Spindle passage diameter: 51 mm Number of spindle speeds: 18 Spindle speed range: 32 to 2500 rpm Bed width: 400 mm Maximum cross slide travel: 305 mm Maximum upper slide travel: 140 mm Cjdpfewlgdyox Agkjpw Maximum tailstock travel: 150 mm Overall dimensions: 3405 x 1175 x 1345 mm Machine weight: 2200 kg

Condition: good (used), Year of construction: 2013, overall weight: 1,519 kg, power: 75 kW (101.97 HP), volume flow: 14.85 m³/h, pressure (max.): 12.8 bar, Air Compressor Atlas Copco GA75VSD FF Codpfx Agsxk U Alekjpw Technical Data Manufacturer: Atlas Copco Airpower Model: GA75VSD FF Year of manufacture: 2013 Maximum pressure: 12.8 bar Free air delivery: 14.85 m³/min Motor power: 75 kW Motor speed: 3,000 rpm Weight: 1,519 kg Power supply: 400 V 50 Hz 3 phase Design: Oil-injected screw compressor Control: Electronic control panel Origin: Made in Belgium No liability is accepted for the correctness, completeness, or up-to-dateness of the information provided.

Condition: excellent (used), functionality: fully functional, overall weight: 1,830 kg, Year of construction: 2011, Air compressor Brand Atlas Copco Model GA75VSD FF Year of manufacture: 2011 Maximum working pressure (MAWP): 12.8 bar / 185 psi / 1.28 MPa Capacity: 14.68 m³/min Voltage: 400 V Cedpsv Nw A Aefx Agkjpw Frequency: 50 Hz Motor power: 75 kW / 100 HP Rotation speed: 2975 rpm Weight 1830 kg Dimensions 2300x1100x2000 mm Air dryer Atlas Copco Type: ID 245 Year of manufacture: 2011 Voltage: 380/400 V, 50 Hz Power 1.93 kW Weight: 150 kg Maximum air pressure: 13 bar Refrigerant: R410A Maximum refrigerant pressure: 42 bar Refrigerant temperature range: 1°C to 61°C Minimum refrigerant pressure: 1.2 bar

Condition: used, Parallel Lathe CAZENEUVE type HB 575 Between points: 2000 mm Maxi Ø on bench: 575 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 51 mm Spindle speed: from 20 to 1600 RPM Multifix Turret 3-jaws chuck Ø 250 mm Spindle motor: 8,8 kW Threadings: Metric + Whitworth Tailstock CM5 Scale 2 axes Lubricant pump Cjdox Aim Aepfx Agkepw 3 points fixed steady - Max Ø 160 mm Voltage: 380 V Dimensions (L x W x H): 3500 x 1500 x 1800 mm Weight: approx 3 T

Year of construction: 2017, condition: ready for operation (used), General Data Measurements width 2840 mm Measurements depth 9997 mm Measurements height 2285 mm Machine weight 12600 kg Cedpjx D Rx Aefx Agkspw Control Unit Brand AMADA Model AMNCF This 3-axis AMADA LCG-3015AJ 9kw + ASLUL TWIN TOWER was manufactured in 2017. It features a laser source AJ 9000, with cutting speeds up to 60 m/min and axis travel of 1550 x 3070 mm. Ideal for precise fiber laser cutting, it includes a 16-station nozzle changer and twin tower storage. Consider the opportunity to buy this AMADA LCG-3015AJ fiber laser cutting machine. Contact us for more information about this machine. Application Types Cutting

Condition: reconditioned (used), CAZENEUVE HB 575 x 1500 Lathe Csdpfx Agox Ebwfekjpw Distance between centers: 1,500 mm Center height: 250 mm Swing over bed: 575 mm Swing over cross slide: 525 mm Swing over carriage: 300 mm Spindle bore: 51 mm Tailstock taper: MT5 Max cross slide travel: 305 mm Number of spindle speeds: 18 Power: 10 Hp Spindle speed: from 32 to 1,600 rpm Electrical cabinet Dimensions (L x W x H): 2,905 x 1,175 x 1,345 mm Weight: 2,050 kg New Heidenhain DRO Multifix tool post – Fixed steady rest New 2-axis Heidenhain DRO