Used Ba 2 for sale (77,374)

Year of construction: 1996, condition: excellent (used), Grasso Screw Unit Amonia with 55 KW motor/3000rpm with oil cooler and control panel Cap.= 152,3 KW at -9C°/+35C° Flow rate= 321m3/h Compressor: ER-E36S-28 Tedpsip Uh Tjfx Ac Njf

Condition: used, Year of construction: 2008, machine/vehicle number: 1160821, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Machine No.: 166 0821 Year of manufacture: 2008 Used, ready for operation Travel axes: X-axis 600 mm Y-axis (alternate position) 600 (975) mm Z-axis 500 mm Control: Siemens 840D control, side-mounted Feed / rapid traverse speed: X, Y, Z 1 – 45,000 mm/min Max. feed force X, Y, Z 15,000 N Average acceleration: X, Y, Z 2.5 m/s² Measuring system: Absolute linear measuring system X, Y, Z Spindles: Spindle speed (stepless) 20-10,000 rpm Torque 2 x 363 Nm (S6/40%ED) Power 2 x 38 kW (S6/40%ED) HSK-A 100, horizontally arranged side by side Spindle center distance 600 mm Spindle bearing diameter 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing-arm carrier with straight-toothed gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec Partition wall between machining and loading area Tool magazine: 2 x 40 tool HSK-A 100 chain magazines, position-coded Automatic pickup Tool change time (chip-to-chip): 4.9 sec Max. tool diameter 100 mm 250 mm if adjacent pocket is empty Max. tool length 350 mm Max. tool weight 20 kg Equipment: Central lubrication Minimum quantity oil lubrication (spindle lubrication) Chip conveyor Connection for central coolant system Hydraulic system Service unit Water recooler Fully enclosed; crane loading possible Dimensions with paper band filter: approx. 5.15 x 8.50 x 4.20 m Weight approx. 20,000 kg Dimensions without paper band filter: approx. 5.15 x 6.60 x 4.20 m Other details: - Condition appropriate for its age - Annual maintenance was regularly performed by the previous owner --- Machine is sold without clamping devices --- --- without foundation parts --- Immediately available, timing by arrangement EXW 72793 Pfullingen Dismantled into main components Transport to site by the customer/buyer! Dimensions/transport dimensions of main machine components: Todpfx Aexqrvvec Njf 1 pc. machine unit (X, Y, Z) mm 3800 x 3350 x 3400 approx. 13,000 kg 1 pc. table unit mm 4400 x 2400 x 3400 approx. 10,000 kg Additionally, peripheral equipment such as chip conveyor, small parts, sheet metal, etc. Short delivery time possible! Schedule by arrangement.

Condition: used, Year of construction: 1999, Procomac UNICLEAN 2R 2-OP1-BA-A-20 1999 The Uniclean units is a modular system comprising five units. Thinned NaOH stocking unit Thinned HNO3 stocking unit Electrical panel Todpfx Aev Ai Rxjc Njf Pneumatic panel Heat exchanger unit The purpose of this system is to sterilise the machine at the end of each work shift and whenever necessary for hygienic purposes for example, before activating the production line after a lengthy line stoppage (week-end). NaOH Dilutions 1 HNO3 Diluitions 1+3% Consumptions Water 20 M3/H Steam 750 Kg/H Air 3 Nm3/H

Condition: used, mileage: 4,52,593 km, power: 310 kW (421.48 HP), first registration: 01/2016, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, next inspection (TÜV): 02/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * MB CD radio * Leaf/air suspension Tjdpfsxpcm Njx Ac Njf * Engine brake * Hill start assist * Lane departure warning * Power take-off (PTO) * Differential lock * Auxiliary heater * Cool box * Roof hatch * Radio set * Sun visor ----Internal vehicle number: 11262-----Subject to errors and prior sale

Condition: used, Gear motor, electric motor, electric gear motor -Manufacturer: Lenze, geared motor type MK 2 i 2.0 BA 10 -Speed: 710 rpm Tjdpfx Acegyb Eyo Nsf -Motor: Lenze type D 90 / BR 1.5 kW / 1420 rpm -Protection class: IP54 -Shaft: Ø 25 x 45 mm -Brake: 32 Nm -Dimensions: 545/250 / H250 mm -Weight: 34 kg

Condition: good (used), Precision Jig Boring Machine HAUSER MOD 2 BA WITH UNUSED 300 mm ROUND INDIVIDUAL TABLE With new electrical control panel for the machine! Tedpfx Aev U Dd Rsc Nof

Year of construction: 1992, condition: good (used), Travel X-axis: 1500 mm Travel Y-axis: 420 mm travel Z-axis: 400 mm clamping surface: 2 x 700 mm x 420 mm max. table load: 800 kg number of tools: 0 2 x 36 pieces tool holder: SK 40 gr. feed: 25 m/min Tjdpfjcph Tmex Ac Nof weight: 9 t area required: 6,50x4,5x3,1 m small speed: 50 rpm big speed: 7500 rpm stepless rapid traverse: 25000 mm/min control: Siemens Sinumerik 820 M GA 3 + 2 x single axis stepper motor control Sama SFI present clamping system: per place 1 NC dividing head with counter bearing, carrier plate, rotary distributor and hydr. clamping and 4-fold dividing head with rotary distributor in special design and sep. NC control Clamping system: 4-fold dividing head consists of 4 -2 jaw chucks, clamping pressure 12bar Make: Hofmann HMR 4/kombi 294/4 Tool breakage control Meutrsuix ATM B310 Renishaw probe system (without probe) Coolant system with sparger, filter system and fine filter

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2000, next inspection (TÜV): 02/2025, * Air suspension Todpfx Acsw Nfb Re Njf * BPW axles * Drum brakes * Cable pull * Second tier * Partition grid * Loading ramp * Unladen weight: 7,760 kg * Next inspection due: 08.2024 -----Internal vehicle number: 9183----Errors and prior sale reserved.

Condition: used, Glass scale, glass measuring stick, scale, digital display, measuring stick, length measuring system, length measuring device, linear scale, position indicator, digital scales, digital scale for digital display, linear encoder, linear encoder Tjdogzwxhjpfx Ac Nof -Length measuring device: from injection molding machine Battenfeld BA-T2400, 2 pieces -Measured length: approx. 950 mm -Price / sale: complete -Dimensions: 1060/35 / H85 mm -Weight: 4 kg / pc.

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Tjdpfx Acjxn Ax As Nsf

Condition: used, functionality: fully functional, rotational speed (max.): 90 rpm, Electrovariable electric motor 1.8kw, 3.2-90 1/min Manufacturer: Getriebebau NORD 32-RV30-90 L/8-2 BRE16 Power: 0.45/1.80 kw Voltage: 230/400 V 50Hz 0.31A Rotation: 3.2-90 1/min IP44 Shaft diameter: 40mm Tedpoud H Sdjfx Ac Nef Weight: 50kg Gearbox: Manufacturer: Getriebebau NORD Type: 90L/8-2 BRE16 IP54

Condition: excellent (used), CATALOG NUMBER 6024 TECHNICAL DATA - Main motor: 2.9kW - Spindle motor: 0.75kW - Carriage feed motor: 0.75kW Todpsgigppofx Ac Nef - Power supply: 380V - Dimensions (L/W/H): 1600x1100x1200mm - Weight: 891kg Machine equipped with: – 2 tables measuring 300x340mm – Pneumatic clamps – Tables adjustable in two angular planes – Capability for producing longitudinal and round tenons on the tables – Mechanically adjustable table speed and spindle rotation speed – Tables adjustable up/down – Tenon width adjustment Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Year of construction: 2017, condition: excellent (used), machine/vehicle number: SI8x4125, DEMAG KBK crane canopy crane runway with dimensions approx. 6x5m (5m bridge) This crane is available several times ! Payload / lifting capacity 125 KG - 0,125to Technical data of the system: Crane runway made of Demag KBK1 + KBK2L rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers etc. Crane is with internal power supply incl. 125KG Demag DC chain hoist - lifting height approx. 3.5m Tsdpfxjupwa Re Ac Nsf Crane is disassembled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: excellent (used), approx. 3000 m² steel construction platform 2-storey used, good condition, see pictures Manufacturer STOW Length approx. 58,5 m Width approx. 54,6 m height lower edge 3,4 m Height upper edge 3,7 m Load 500 kg/m² C-profiles and sigma-profile construction fixed with screws and nut Grid spacing adjustable in length floor structure is 38 mm chipboard, highly compressed, tongue and groove underside white, upper side grey coated Tsdpfxed S S E Ue Ac Njf Negotiated price: Offer on request! Partial sale possible! Dismantled and loaded Goods are in stock. Transport costs are available on request. Visits possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices and subject to prior sale! See our AGB, all prices excl. VAT from stock) Purchase / Sale We are constantly looking for and offering numerous articles from various areas clean-swept premises Liquidations Fast - flexible - ready to hit! We also clear and - or dispose for liquidators. Write to us with a few keywords and we will contact you immediately. To get to our site, please click on our logo!

Condition: used, Year of construction: 1962, functionality: fully functional, Adolf John Hanau AB II Timber saw Wood saw Trimming saw Todpfsuprqwex Ac Nef center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min From first owner ! Weight with conveyor approx. 1250Kg Connection to 400A 32A Used, functional condition

Condition: good (used), Year of construction: 2014, functionality: fully functional, load capacity: 15,000 kg, total length: 7,000 mm, total height: 2,255 mm, Equipment: double-sided, With double-sided swiveling front attachment, 5 pull-out drawers, unladen weight: 4,830 kg, with roll-out mechanism. Tedpfxjx An Tne Ac Nsf

Condition: ready for operation (used), Year of construction: 1989, Universal Milling Machine Horizontal - Vertical WMW Auerbach Type FW 250 x 1000 / 2 Year of manufacture: 1989 Table: 1250 x 250 mm Tedpfsxy N Nlsx Ac Njf Table load: 1250 kg Travel X/Y/Z: 700 / 400 / 500 mm Heidenhain 3-axis digital readout SK 40 Spindle speeds: 55 – 2800 rpm Feeds: 10 – 630 mm/min, stepless Vertical head Horizontal milling device Drive: 6.3 kW Weight: 2.5 t Price: EUR 2,000 – plus VAT, ex location

Condition: used, Technical details: sheet width: 250 mm plate thickness: 2 mm number of rolls: 11 straightening feed: 5...30 m/min infeed height: 1250 mm total power requirement: 4,0 kW weight of the machine ca.: 620 kg dimensions of machine: 1,15x1,02x1,5 mm dimensions electric cabinet LxWxH: 0,66x0,53x0,32 m Band Leveling Machine with feed Tedju Ic Ewspfx Ac Nsf equipment: - sideways band guidance rolls model: - band intake height horizontal:1250mm - tiltable: positiv 30°; negativ 15° *

Condition: used, Year of construction: 1984, material width 250 mm material thickness 0,2 - 2,0 mm Tjdpfx Acsvuk Sbo Nsf no. of straightening rolls 7 straightening roll diameter 60 mm run-in height 1250 mm speed 5 - 30 m/min power requirement 2,2 + 1,3 kW Weight 0,65 t dimensions (WxDxH) 1,05 x 1,25 x 1,5 m with infinitely variable drive, material inlet inclineable, straightening rolls individually manually adjustable, pneumatic opening of the upper roller cassette, coil loop control via arm as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: ready for operation (used), From 2008. Works fine, both units come with one shredder and one Juliette slicing heads. We can sell them separately too. Tjdpfsvk Earex Ac Nsf

Condition: good (used), Tailstock Quill size: MK 2 Quill stroke: 30 mm height-adjustable Tjdpfx Ajdlp Txoc Nsf Tip height of 250-285 mm of - 5 degrees to plus 15 degrees of tilt Floor area 230 x 155 mm Weight 27 kg

Year of construction: 1999, condition: excellent (used), machine/vehicle number: 99051725, Format (cm): 35x45 Todpfx Acsh Eva Hj Njf Equipment / Additional information: Pockets: 2 Fold types: spiral fold, zigzag fold, double parallel fold, single fold Underfloor suction feeder: 30 000 bph Friction feeder: 20,000 sheets / h with parallel fold A4, 80 g / m2 Paper weight: 40 - 250 g / m2 with simple parallel fold Electrical connection values: Mains voltage: 230V Current consumption: max.IOA

Condition: used, No. 3236 Pendulum saw Bäuerle PKS Z 5/2 Used Machine 0° - 45° rotatable with universal stand, height-adjustable by 75 mm Maximum saw blade diameter 450 mm Saw blade inner diameter 30 mm Cutting height 125 mm Manual extension length 760 mm Motor 3 kW, 2800 rpm Including 2 roller conveyors 3000 mm and 2000 mm long Including saw blade Sale on behalf of the customer, ex location near 69124 Heidelberg, without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Tedpfxew Idk Io Ac Njf Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, x-travel 600 mm Tedpfx Ajwqrxmjc Nsf y-travel 400 mm z-travel 500 mm total power requirement 6 kW

Condition: used, Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter Todpfsb A Rlrsx Ac Nsf -Inch threaded jaws: 1/4" - 1 1/2" inch -Weight: 8 kg