Used Bbs 550 for sale (3,066)

Year of construction: 2001, condition: used, functionality: fully functional, machine/vehicle number: Typ SUT 550 N-EM, STEUP SU 550 N Bridge Saw / Cutting System – 12.5 kW – 400 V – without table For sale is a robust STEUP cutting system / bridge saw, type SU 550 N. The machine is suitable for professional use in the field of stone processing, particularly for cutting natural stone and similar materials. Technical data according to the nameplate: - Manufacturer: STEUP Maschinenbau GmbH - Type: SU 550 N - Power: 12.5 kW - Voltage: 400 V - Frequency: 50 Hz - Fuse rating: 3 × 50 A Dwedpfjzuzq Dex Apteb - Control voltage: 24 V - Speed: 1,400 rpm - Cutting discs: Ø 400–600 mm - Machine no.: 965/00-05 (according to the nameplate) The machine is a heavily built, industrial-grade bridge saw and is therefore of interest to stonemasonry businesses, natural stone processing companies, and commercial workshops. Important: The saw table is NOT included in the sale. The machine is explicitly sold without a table. Used condition with corresponding signs of wear. The technical condition should be checked during an on-site inspection. Sold as pictured. If you are interested, please contact us. Inspection is possible by prior arrangement.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 35220, pressure: 10 bar, nominal heat output: 5,057 kW (6,875.60 HP), Used high-pressure steam boiler - Steam output: 7,000 kg/h Dwjdoy Ukcropfx Aptob - Economizer - Mixing cooler - Dual-fuel burner: Weishaupt WM-GL-50 (including sound insulation hood) - Double pump station: Grundfos CR10-12 - Oil suction unit - Standby operation (72 hours) - All necessary fittings are included - If interested: steam accumulator 25 m³ Boiler and accumulator have been dry-stored since 2024. Control system can still be tested. Excluding dismantling (EXW). Documents, photos, and information (TÜV inspection, burner maintenance, etc.) available upon request.

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 00320002700, spindle bore: 91 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 307 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,240 mm, total height: 2,500 mm, total length: 6,000 mm, total width: 2,200 mm, overall weight: 8,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, input voltage: 400 V, input frequency: 50 Hz, input current: 99 A, workpiece length (max.): 1,225 mm, nominal power (apparent): 65 kVA, workpiece diameter (max.): 480 mm, workpiece weight between centers: 500 g, operating hours of spindle: 1,103 h, Equipment: chip conveyor, documentation/manual, DMG MORI CLX 550 CNC lathe - Bed inclination: 45° - Bed diameter: 700 mm - Max. slide diameter V1 to V3: 500 mm - Max. workpiece diameter: 480 mm, in the front workpiece diameter: 320 mm - Distance between centers: 1450 mm - Y-axis travel: 120 mm (+- 60 mm) - Z3-axis travel: 1200 mm - Spindle height from axis to ground: 1043 mm - Main spindle, bar capacity: 80 mm - Bar diameter: 81 mm - Front bearing diameter: 130 mm - Resolution axis C1: 0.001° - The machine has a tailstock - Distance between two spindle centers: 1495 mm Dwjdpfx Aezxy R Rjpteb - Z1 axis travel: 1200 mm - Max. workpiece length: 1140 mm - Max. workpiece diameter: 450 mm - Bar capacity of the tailstock: 50 mm - Bore diameter of the tailstock: 73 mm - Bar diameter: 52 mm The machine is equipped with a tailstock (fitted with a three-jaw chuck SMW AUTOBLOK, diameter: 210 mm), as well as a 12-position tool turret, including powered tool stations, and an SMW AUTOBLOK three-jaw chuck, diameter: 250 mm. It also includes a chip conveyor, filter extraction, and documentation and CDs. FCA D-73529 Schwäbisch Gmünd - loaded onto a truck

Condition: like new (used), Year of construction: 2022, machine/vehicle number: 2022/5/18, functionality: fully functional, Saw blade I, diameter/bore: 550 mm/50 mm Motor: 3 kW; 400 V; 2800 rpm Saw blade II, diameter/bore: 350 mm/40 mm Max. workpiece dimensions: 210 x 100 mm Motor: 2 kW; 400 V; 2800 rpm Vertical cutting height: 150 mm Swivel range of saw blade I: -70°/90°/45° Feed: Pneumatic, controlled by a two-hand system Dwsdpfxozwqu Ro Aptjb Air connection: 8 bar Operating manual: Available Dimensions (width x depth x height): 1200 x 1000 x 1400 mm Weight: 480 kg

Condition: excellent (used), Year of construction: 2010, Panel saw Manufacturer: Felder Type: Kappa 550 Year of manufacture: 2010 Sliding table length: 3,200 mm Cutting width: 1,250 mm Cutting height: max. approx. 204 mm Power: 7.5 kW Max. saw blade diameter: 550 mm Height adjustment: Electric Angle adjustment: Electric Cutting width display: Digital Scoring saw: No Motor brake: Yes Djdpjzy Uzyofx Aptowb

Condition: used, functionality: limited functionality, The following are offered: OPS 650 (5-axis): Tool changer with 40 positions for HSK E40 OPS 550 (3-axis): Tool changer with 32 positions for HSKE 40 Robot stations for the Erowa clamping system: 70 positions (workpiece changer) Robot stations for pallet changing: 8 positions The robot is currently not in operation due to a malfunction. However, this can be repaired so that it functions normally again. Dsdpezzavrefx Aptswb The cooling unit for the 650 machine is external.

Year of construction: 2022, operating hours: 95,00,000 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 4131.05/22, -Bograma BSR 550 Servo with pallet feeder -Cylinder heater Dwjdpszl Skpsfx Aptob -Registration mark reader -Interface box for controlling an external vacuum valve -Stack delivery STA 550BK for a maximum of 9 sheets -Performance: 12,000 sheets/hour, 165 m/min -Minimum format: 210 x 297 mm -Maximum format: 550 x 750 mm

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 5101163, spindle motor power: 30,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, type of input current: three-phase, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, total height: 3,800 mm, total length: 9,100 mm, total width: 7,300 mm, distance table center to spindle nose: 950 mm, overall weight: 29,000 kg, input voltage: 400 V, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 700 mm, coolant supply: 20 bar, table length: 3,500 mm, table height: 900 mm, table width: 1,200 mm, number of slots in tool magazine: 45, Equipment: chip conveyor, documentation/manual, The machine is in working condition and has no problems. Dwsdpfezq Rz Dex Aptjb

Condition: used, Year of construction: 2021, functionality: fully functional, power: 10 kW (13.60 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, saw blade guard, scorer, Format panel saw / table saw Format4 Kappa 550 by Felder, purchased on May 26, 2021, for precise longitudinal, cross, and miter cuts in wood and panel materials. Professional saw for carpentry, interior design, and workshop use. Dwedozuywijpfx Aptsb Key technical data: - Machine type: Format panel saw / table saw - Saw blade diameter: 250–550 mm - Max. cutting height: approx. 202 mm at 90° / approx. 140 mm at 45° - Swivel range of the saw unit: 0°–46° - Cutting width: depending on the model, approx. 1000 / 1250 / 1600 mm - Cutting length: depending on the model, approx. 2200–3700 mm - Speeds: 3000 / 4000 / 5000 rpm, optionally infinitely variable 2000–6000 rpm - Motor power: approx. 10 KW - Precise format table for repeatable, accurate cuts - Suitable for solid wood, panel materials, and precise furniture / interior design work - Core machine for professional woodworking shops, carpentry workshops, training workshops, and makerspaces No warranty.

Year of construction: 2001, condition: used, Five CNC PCB drilling and routing machines are available. 1) Pluritec Multistation V3 CNC PCB drilling and routing machine, year of manufacture: 1998. 2) Schmoll A-System 1 Twin CNC PCB drilling machine, year of manufacture: 1997. 3) Lenz G650-4 CNC PCB drilling and routing machine, year of manufacture: 2001. 4) Lenz GX-460/2 CNC PCB drilling and routing machine, year of manufacture: 1991. 5) Lenz DLG 550-2 AL CNC PCB drilling and routing machine, year of manufacture: 2002. The machines come from the drilling department of a PCB manufacturing facility. An on-site inspection is possible. Dwodpfx Aozzqc Neptjb

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Dsdpfx Aozzvyysptewb Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, saw blade diameter: 550 mm, grinding wheel diameter: 150 mm, total width: 1,200 mm, total length: 1,200 mm, total height: 1,250 mm, type of input current: three-phase, input current: 4 A, input frequency: 50 Hz, grinding spindle motor power: 1,900 W, input voltage: 400 V, overall weight: 220 kg, spindle speed (min.): 3,700 rpm, Equipment: rotational speed infinitely variable, Loroch SW 550 machine in good working condition, ready for operation. The machine is suitable for professional workshop use. - saw blade dia. from 100 - 550mm - suitable for HSS saw blades for wood and metal cutting. - HSS saw blades geomeries - A, B, BW, C Dwjdpfoy Sgqtex Aptsb - Water cooling - additional device for shaping band saw blades - Manual in Czech language (but it is simple machine)

Condition: used, Year of construction: 2006, overall weight: 4,740 kg, FANUC Series 18i-TB control unit, with TOP AUTOMAZIONI FU350SX hydraulic cylinder – year 2024 Workholding fixtures and tools not included. AVAILABLE: November 2026 Dwsdpozxr Dcjfx Apteb

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 550-4300 GX injection molding machine Year of manufacture: 2013 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 4300 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 90 mm Backflow valve: yes Nozzle: open Clamping unit Clamping force: 5500 kN / 550 t Mold opening force – pressure pads: 385 kN Platen dimensions (H × V): 1430 × 1350 mm Distance between columns (H × V): 1040 × 910 mm Maximum mold opening stroke: 1350 mm Minimum/maximum mold height: 400–950 mm Maximum distance between platens: 1750 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20:1 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Injection rate: 636 cm³/s Screw speed: 195 rpm Nozzle clamping force: 129 kN Electrical and hydraulic equipment Rated motor power: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dwsdozvm Dlopfx Aptjb Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 728 mm Dry cycle time / stroke according to KraussMaffei standards: 2.5 s / 520 mm Oil tank capacity: 1180 l Dimensions and weight Machine dimensions (L × W × H): 8.08 × 2.80 × 2.39 m Net weight with control cabinet: 25.0 t

Year of construction: 2020, operating hours: 6,000 h, condition: excellent (used), functionality: fully functional, Fully Automatic Paper Bag Making Machine for Sale – WFD-550 Fully automatic paper bag making machine, model WFD-550, manufactured in 2020, available for sale. The machine is in good working condition and was used in production for only 2 years. It has been regularly maintained and operates reliably. Main features: - Production of paper bags with twisted handles - Production of paper bags with flat handles - Fully automatic feeding and forming process - Stable and efficient operation The machine is suitable for industrial production and can be used for manufacturing shopping bags, packaging bags, and other paper products. Dwodeyuf T Rspfx Apteb Condition: good technical condition, ready for operation. Price: negotiable For serious inquiries, please contact by email.

Condition: used, Year of construction: 2018, saw blade diameter 550 mm Dsdpfx Aszvhm Uoptjwb Under-table saw for aluminum and PVC Hydropneumatic saw blade feed Two-hand operation Minimum-quantity lubrication system Table rotates on both sides, with locking positions at +/-45° and +/-60° Mitre cuts up to 60° on both sides Full protective guard very good condition! The saw was rarely used; it served as a backup machine

Condition: used, Year of construction: 2021, - Cutting width: 1250 mm - Cutting length: 2800 mm Panel saw Dwedszuy A Espfx Aptjb Manufacturer: Felder Format4 Type: Kappa 550 Year of manufacture: 2021 Technical data - Saw blade: 250 - 550 mm - Cutting height: 202 mm (90°), 140 mm (45°) - 3 speeds: 3000/4000/5000 RPM - Cutting width: 1250 mm - Cutting length: 2800 mm - Control system: Kappa 550 e-motion - Surface area of the extension table: 1250 x 650 mm - Telescopic fence allows for crosscuts up to 3200 mm - The crosscut fence can be swivelled from 90° to 45° - Circular saw extension of 1200 mm behind the saw blade axis - The positioning of the parallel fence is done electronically via a ball screw integrated dust-free into the circular saw table Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), functionality: fully functional, Vacuum cutter ALPINA SWOOPER SWV 550 S, 550-liter capacity. If you are interested, please let me know. Dodozmvwpepfx Aptewb

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, power: 7.5 kW (10.20 HP), cutting height (max.): 200 mm, cutting width (max.): 1,450 mm, saw blade diameter: 550 mm, rotational speed (max.): 4,800 rpm, rotational speed (min.): 2,800 rpm, overall weight: 1,280 kg, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 200 mm, cutting width at rip fence: 140 mm, table length: 3,200 mm, Equipment: motor brake, scorer, Heavy-duty panel saw with scoring unit and Siemens three-axis control system Exhibition machine with full warranty Hanging control panel with Siemens control and a large 10" touchscreen Control of saw blade height/tilt and positioning of the parallel fence via the control panel Max. cutting height 200 mm Scoring unit with separate drive motor Main saw blade with belt drive and speeds of 2800/3665/4800 rpm High self-weight ensures vibration-free operation Large cantilever table with material roller Extendable aluminum rip fence with three folding stops and digital position display 7.5 kW main motor mounted on a robust cast iron frame Four-bearing format sliding table with double roller carriage made of anodized aluminum with high torsional rigidity Multiple locking on the sliding table Standard equipment includes table extension and table lengthening made of steel sheet Large pendulum guard can be easily raised using a gas spring Saw blade clamping via a tool-free rapid clamping system The panel saw is assembled in our demonstration center in Chemnitz. It is new and in unused condition. Dwedpfxevmfaws Aptjb We will be happy to assist with transport, assembly, and training.

Condition: good (used), Year of construction: 2015, total width: 1,700 mm, total length: 4,700 mm, total height: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, We offer this Novatec PLURITANK 550 ultrasonic cleaning system in good condition, manufactured in 2015. 1) Overall dimensions of the system: 4700 x 1700 x 1500 (h) mm 2) Total installed electrical power: 53 kW 3) Supply voltage: 400V - 3 phases + N + PE - 0 Hz Dedpfxszy R Rko Aptswb 4) Dimensions of the tanks: • Tank 1: “Ultrasonic cleaning tank in hot aqueous detergent solution”  1450 x 1150 x 1500 (h) mm (capacity 620 L) • Tank 2: “Hot hydrokinetic rinsing tank for immersion in tap water with passivating agent”  1200 x 1150 x 1500 (h) mm (capacity 580 L) • Tank 3: “Hot air recirculation drying oven”  1200 x 1150 x 1500 (h) mm (capacity 580 L). If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 4,035 mm, travel distance Y-axis: 1,720 mm, travel distance Z-axis: 380 mm, Equipment: chip conveyor, documentation/manual, We are offering this ready-to-use Weeke Optimat BHC 550 machining center, year of manufacture 2003. Manufacturer: Weeke Model: Optimat BHC 550 Year of manufacture: 2003 Condition: ready for operation Dedpfx Apsx Nw Drotowb Machine type: machining center If you have any questions or need more information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, total width: 3,100 mm, total length: 11,500 mm, total height: 2,500 mm, overall weight: 2,500 kg, empty load weight: 2,500 kg, We offer this ready-to-use Lanemark Contino 550 SSP box cleaner, manufactured in 2009. Manufacturer: Lanemark Model: Contino 550 SSP Year of manufacture: 2009 Condition: ready to use Dedezymicopfx Aptswb Category: 32 Type: Box cleaner If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2021, Hilltip IceStriker 550 Spreader, Year of Manufacture 2021 | Returned from Rental | Very Good Condition | Immediately Available Compact professional spreader for municipalities, municipal depots, and service providers. For sale is a Hilltip IceStriker 550 from the year 2021. This spreader comes from our rental fleet and has been regularly maintained. The unit is in very good, well-maintained condition, is technically flawless, and ready for immediate use. The IceStriker 550 is the ideal solution for pick-up trucks, municipal vehicles, and smaller winter service vehicles. Thanks to its compact design, wet salt technology, and extensive special equipment, it enables economical and precise winter service operations. Technical Data Manufacturer: Hilltip Model: IceStriker 550 Year of Manufacture: 2021 Condition: Used, Returned from Rental Hopper Volume: 550 liters Drive: Electric Hopper Material: Corrosion-resistant polyethylene Spreading Material: Salt, wet salt, grit, and sand-salt mixtures Dimensions Length: approx. 1,420 mm Width: approx. 1,220 mm Height: approx. 1,060 mm Special Equipment: * LED rear lighting including license plate kit * Warning light for increased safety during operation * White LED work light * Large hopper (+25 cm) for optimized material distribution * Sensor with alarm function when material is low * Salt pre-wetting unit * Manual spray nozzle Your Advantages: * Well-maintained, returned from rental * Regularly maintained * Technically flawless condition * Compact design for versatile carrier vehicles * Wet salt technology for economical spreading material usage * Very good availability of spare parts * Ready for immediate use The Hilltip IceStriker 550 offers professional winter service technology in a compact design. Thanks to the integrated wet salt technology, material level monitoring, and extensive special equipment, this spreader is ideally equipped for municipal and commercial winter service operations. Dwsdpezzhbvjfx Aptsb Inspection and demonstration possible by appointment. Financing and nationwide delivery available upon request. Location: 10114

Condition: excellent (used), Year of construction: 2017, CATALOGUE NUMBER 8014 TECHNICAL DATA - inlet width 540mm - inlet height 260mm - roller width 560mm - roller diameter 590mm - number of knives on the roller 4 pcs - feed rollers, geared, top and bottom 2x4kW - screen 40x35mm - electric auto-reverse (adjustable) - reverse gear - vibrating feeder 2.2kW - vibrating feeder length 6000mm - vibrating feeder width 500mm - capacity approximately 12-16 m³/h (depending on the type of material being shredded and the screen opening) - main motor 75kW - automatic hydraulic lifting function for the upper feed roller - overall dimensions of the vibrating feeder 6000x950x1600mm - overall dimensions of the machine L/W/H 3400x1700x2000mm - total weight approximately 6000kg ADVANTAGES - vibrating feed table 6000mm - electric auto-reverse (adjustable) - reverse gear - manufactured by the Polish brand OSKA - electrical diagram, DTR documentation + CE - unpainted - used shredder, very good condition Net price: 179900 PLN Net price: 42834 EUR, depending on the exchange rate of 4.20 EUR Dwsdpfx Apjzwwpustob (Prices may change due to higher fluctuations)

Condition: used, Year of construction: 1977, stroke 300 mm Dwjdpezmixgjfx Apteb