Used Bag Closer for sale (1,997)

Condition: ready for operation (used), A horizontal flow pack packaging machine RGD Mape is available. Packaging speed: 30m/min, max. packaging capacity: 100packages/min, product length range: 30mm-450mm, product width range: 10mm-240mm, product height range: 10mm-120mm, max. film width: 600mm, max. film outer diameter: 350mm, film core diameter range: 60mm-110mm, max. film roll weight: 35kg, machine weight: approx. 450kg. Documentation available. An on-site inspection is possible. Lredjzdunhepfx Abyjn

Condition: good (used), Complete weighing and vertical form, fill and seal twin bagging system, previously used to pack chocolate drops. This system comprises of the following equipment: 1 x Joy Conveyors product hopper. Overall dimensions – 550mm long x 610mm wide x 680mm deep. 1 x Joy Conveyors bucket elevator. 1 x Stainless-steel gantry and steps. Gantry overall dimensions – 3m long x 3m wide. 1 x High Dream AC-6B14 14-head multihead weigher with dimple pans and 10.4’’ touch-screen control panel. Serial number – AC-6B140510037. Weighing range – 25g – 500g. Accuracy - ±0.5g. Speed – up to 140 bags/minute (product dependent). Ljdpfxey An I Io Abyern 1 x Keymac servo-driven timing hopper. 1 x Keymac vertical form, fill and seal twin bagging machine. Model – BT2600 VFFS. Serial number – 7090. Sealing jaws - Unit 1: Vertical - 300mm & Horizontal - 250mm. Unit 2: Vertical - 320mm & Horizontal - 250mm. Electrical requirements – 220-240 V / 60-60 hz / 1 phase. Previously running 210mm wide film. 2 x Forming tubes, each 60mm diameter. Has extension chute for larger packs. Overall dimensions - 1.9m wide x 1.6m deep x 2.1m high. 1 x Outfeed inclined conveyor. Infeed height - 200mm. Outfeed height - 1000mm. Belt dimensions - 3m long x 195mm wide. System footprint - 7.5m long x 3.4m wide x 4.4m high.

Year of construction: 2025, condition: new, The Bag Opening Silo is a compact and flexible solution designed for efficient emptying of small and big bags containing cement, lime, and other powdered materials. Big bags can be safely and easily unloaded using a forklift or other lifting equipment, ensuring a clean, safe, and controlled material transfer process. This system represents a practical solution for construction sites and production locations where bulk cement delivery by tanker is not possible, enabling continuous use of bagged materials. In addition to material emptying and dosing, the system can also be used as a temporary or permanent intermediate storage solution, providing full protection of the material from moisture, dust, and other external influences. The system can be easily connected to existing mobile and stationary concrete batching and mixing plants, allowing fast integration into the existing production process. Upon customer request, the system can be equipped with load cells for precise material weighing and control. The discharge capacity is 15 m³/h. Ledpozcwrhsfx Abysrn Thanks to its compact construction, easy handling, and high functionality, the Bag Opening Silo represents a reliable and practical solution for handling powdered materials at various construction sites and production facilities. Available models: - BS 02 - Capacity: 2 m³ - BS 04 - Capacity: 4 m³ - BS 06 - Capacity: 6 m³

Condition: new, Autobag bags are available for sale in the following sizes: 150x250 1.5 million bags 200x320. 2.5 million bags Price Euro Palette 1 Pallet 0.02€ x Bag Ljdpju Ni Rpofx Abyjrn 2 Pallets 0.019€ x Bag 3 Pallets 0.018€ x Bag 4 Pallets 0.017€ x Bag 5 Pallets 0.016€ x Bag and so on 10 and more 0.01€ Bag 1 million Autobag bags from 0.01€ each

Condition: like new (used), Year of construction: 2023, This machine is tailor-made for businesses seeking a simple and reliable packaging solution. The maximum speed is up to 1,500 bags per hour. Operation is easy, requiring just two simple steps: filling the bag from the top and sealing the bag. For sale: Autobag bags in the following sizes: 150 × 250 – 1.5 million bags 200 × 320 – 2.5 million bags Price for full Euro pallet: Ljdpfer E Dpzsx Abyern 1 pallet: €0.025 per bag 2 pallets: €0.019 per bag 3 pallets: €0.018 per bag 4 pallets: €0.017 per bag 5 pallets: €0.016 per bag and so on 10 or more pallets: €0.01 per bag From 1 million Autobag bags: from €0.01 each Currently reserved.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: V1 01HOHS300KET5ESGR0SZ580, warranty duration: 12 months, The machine is usually always in stock. Short delivery times are possible. System Features 1. 2.5-meter-long chain conveyor (other lengths available upon request) 2. Adjustable bag former 3. Double film loader + automatic film centering device 4. Rotary end seal, single sealing jaw 5. Solid center fin seal structure 6. Four servo-controlled drives Ljdpfx Aeq Ikgksbyern - Active material feed shaft - Center seal - End seal - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. 304 stainless steel housing 10. Documentation in local language 11. Print mark control 12. Programmable bag length 13. Standard travel direction: left to right Technical Parameters 1. Product length: L40 - 300 mm 2. Product width: W30 - 160 mm 3. Product height: H5 - 60 mm 4. Packaging speed: up to 300 products/min (depending on product, bag length, material, and number of sealing jaws) 5. Maximum film width: 500 mm 6. Supply voltage: 1-phase 220V 50Hz 7. Total power: approx. 7.5 kW 8. Machine weight: approx. 450 kg 9. Machine dimensions: approx. 4250 x 990 x 1650 mm

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, Production orientation: Vertical Conveying system: Infeed and outfeed optional and dependent on product Film feed: Rear Forming shoulder: Fixed Operator display: Touchscreen with memory function Drives & controls: 3 servo motors and PLC control system Packaging length: 50–190 mm Packaging width: 50–150 mm (depending on film width) Packaging height: Dependent on forming shoulder Speed: 15–30 bags/min, depending on material, pack size, and product Film width: 110–320 mm Power consumption: Approx. 4.6 kW Machine material: “304 stainless steel with surface treatment” Printer bracket: Suitable TTO or ink wheel printer optionally available at extra charge Delivery time: Current lead time under 10 weeks Z-conveyor system: €8,500 Features: Stainless steel configuration, suitable for the food industry • Application for granules and small parts such as screws Lsdpfx Aeq Ikhaebyorn • Sectors: Pet food, food (coffee, nuts), metal industry • Simple touchscreen operation with color icons • Safety protection covers • Can be integrated upstream/downstream with other machines • Customer-specific modifications/designs on request • 12-head scale integrated, hopper 0.8L Additional options (on request and at extra cost): • Euro hole punch etc. Production orientation: vertical

Condition: new, functionality: fully functional, Features of the system 1. Chain conveyor, 2.9 meters in length (other lengths available upon request) 2. Two custom-made forming shoulders with a fixed shape, adapted to the product dimensions 3. Single film loader + Automatic film centering device 4. End sealing unit, box motion, single sealing jaw 5. Robust, medium fin sealing structure 6. Eight servo-controlled drives 7. HMI control panel 8. Four individual temperature controllers 9. Housing made of stainless steel 304 10. Documentation in the local language 11. Print mark control 12. Bag length programmable 13. Standard running direction: left to right Technical parameters 1. Product length: L120-600mm 2. Product width: B70-250mm 3. Product height: H20-120mm 4. Packaging speed: up to 60 products/min (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1 phase, 220V 50Hz Lodpfx Aek Dz Hwobyern 7. Total power consumption: approx. 8.8 kW 8. Machine weight: approx. 1100 kg 9. Machine dimensions: approx. 4500 x 1070 x 1590 mm

Condition: used, Year of construction: 1980, Paper bag making machine 3 colors flexo inline Photocell bag widht: 170 - 280 mm Lrodpfey Umq Sex Abyen tube lenght: 300 - 600 mm gusset: 60 - 150 mm

Condition: good (used), 1 x Weighing and Bagging System Lredpfxjzgc H Dj Abyon Cyclone 200B spec; Max speed 80 bags per min Bag width 60-200mm Beg length 50-280mm Power supply 3 phase .375kw Comes with Ice printer *Please note that this machine does not come with steps - only the gantry rails on 3 sides* *UKFM can quote for dismantle of the system and delivery to mainland UK*

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12349, Sack tip station / Bag dump station with dust collector powered by an integral fan with reverse jet filter cleaning of filtration cartridges. Lredpfx Abezf Nhfeysn

Condition: like new (used), Year of construction: 2024, machine/vehicle number: WADTT7000PA010594, The BUDISSA BAGGER RT 7000 Farm, with this model designation, is suitable for small and medium-sized farms with an annual silage production of up to 2,000 tons. During filling, it achieves a throughput of 45–70 t/h when paired with a smaller tractor (75–125 hp). Lrsdpfoy Em Apox Abyen

Condition: ready for operation (used), Year of construction: 2007, A horizontal flow wrapping machine with side sealing Hugo Beck is available. Film feed: roll, max. film width: 500mm, film web width: 550mm, max. film roll diameter: 350mm, min. product length: 100mm, product width range: 10mm-450mm, max. product height: 250mm, cycle output: 100/min, max. mechanical speed: 28m/min. Machine dimensions X/Y/Z: approx. 2250mm/1500mm/1300mm, weight: approx. 750kg. Documentation available. An on-site inspection is possible. Lodpfx Ajzc Rfbebyorn

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. Ljdpfx Asy Urtfobyorn All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Ideal machine for very flexible bags (Vol up to 60 Liters) Impusl sealing for PE-Films Lodex I D Tkjpfx Abyorn Bagsize up to 420 (option 550) mm and baglenght 800mm control operated via touchscreen terminal and recipe management. Machine is in very good condition.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Ideal machine for very flexible bags (Vol up to 60 Liters) Ledpfx Abjx I Ecmeyorn Impusl sealing for PE-Films Bagsize up to 420 (option 550) mm and baglenght 800mm control operated via touchscreen terminal and recipe management. Machine is in very good condition.

Condition: used, Year of construction: 2010, machine/vehicle number: LC420, Used Sacmi Filling Line for Bag in Box, Up to 650 Bags/Hour Introduction to Efficiency and Precision The used Sacmi filling line exemplifies efficiency, targeting Bag in Box applications with up to 650 bags/hour capacity. Importantly, it stands ready for operation, facilitating seamless integration into production lines. Versatility in Container Handling of the Filling Line for Bag in Box Additionally, this machinery accommodates a variety of Bag in Box sizes, including 3 L, 5 L, 10 L, and if needed also for 20 L. This versatility ensures that producers can meet diverse market demands with ease. Innovative Filling Methodology Furthermore, the line employs a sophisticated gravity and light depression filling technique. Specifically, this approach is designed to handle still wine, optimizing quality preservation during the filling process. Operational Efficiency and Speed Moreover, the filling line is engineered for maximum operational efficiency. It achieves remarkable speeds of up to 650 bags per hour. Consequently, this capability supports high-volume production requirements. Adaptability to Various Formats The machine’s format adaptability is a key feature, enabling swift changes between different Bag in Box sizes. Thus, it reduces downtime and enhances production flexibility. Gravity/Light Depression Filling Advantages Additionally, the gravity and light depression method minimizes wine oxidation risks. It ensures the wine’s organoleptic properties are preserved, maintaining product quality from filling to consumption. Technical Specifications for Optimal Performance of the Filling Line for Bag in Box The filling line’s technical specifications are tailored for still wine products. The gentle filling process safeguards the wine against agitation, crucial for maintaining taste and aroma integrity. Maintenance and Operational Readiness Regular maintenance checks are essential for sustaining operational readiness. The design facilitates easy access for maintenance, promoting efficient problem-solving and minimizing potential downtime. Enhancing Production Throughput Lodpfevvh Sujx Abyern Importantly, the ability to quickly adjust to different bag sizes enhances production throughput. This adaptability is crucial for meeting varied packaging requirements without sacrificing speed or efficiency. Conclusion of the Filling Line for Bag in Box In conclusion, the used Sacmi filling line for Bag in Box applications up to 650 bags/hour represents technical excellence. Its design prioritizes efficiency, versatility, and quality, making it an invaluable asset for wine bottling operations seeking to optimize their production capabilities while ensuring product integrity.

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 87A, total width: 2,400 mm, total length: 10,500 mm, total height: 2,300 mm, cutting length (max.): 670 mm, type of input current: three-phase, overall weight: 9,000 kg, Holweg RS2 (42GL) Year 1988 Brand: Holweg Model: RS2 (42GL), modified for standard single-channel RS21 operation Year: 1988 For the production of flat-bottom paper bags, with or without gusset. Lrodpey Iclxefx Abysn Machine overhauled: new electrical components, new 3-phase main motor with frequency inverter, unwind station with new Renova Italy electronic brake system and dancer roller. Equipped with inline 4-color flexographic printer model IS 80, maximum print width 800 mm. Printing sleeves included: 4 x 220 mm, 3 x 320 mm, 1 x 370 mm, 1 x 380 mm, 4 x 400 mm, 4 x 430 mm, 4 x 440 mm, 1 x 520 mm, 3 x 520 mm, 3 x 580 mm, 6 x 660 mm, 3 x 680 mm. Gears: - 320 mm: 4 printing gears + 2 machine gears - 340 mm: 4 printing gears + 2 machine gears + 1 printer gear - 380 mm: 4 printing gears + 2 machine gears + 1 printer gear - 440 mm: 4 printing gears + 2 machine gears + 1 printer gear - 520 mm: 4 printing gears + 1 machine gear - 580 mm (290): 4 printing gears + 2 machine gears + 1 printer gear - 680 mm: 4 printing gears + 2 machine gears + 1 printer gear Forming plates: 1 x 90 mm, 1 x 120 mm, 1 x 140 mm, 1 x 150 mm, 1 x 170 mm, 1 x 180 mm, 1 x 200 mm, 1 x 240 mm, 1 x 300 mm. Note: Gluing knives for different bag widths are not included. Printer shafts/adapters: 4 printer shafts included, compatible with the printing sleeves listed above. Perforation type. Max unwinder diameter: 1,200 mm Pneumatic shaft: 70 mm Max paper width: 900 mm Min–max bag width: 70–340 mm (current owner produced only one bag size: 140 mm width x 260 mm length) Cut-off length: 190–680 mm Min–max bag length: 180–670 mm Working speed: 400–800 bags/min (depending on bag size) Suitable paper: 30–70 g/m² Machine can be inspected in operation. Immediately available.

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, machine/vehicle number: CK 898, total width: 2,100 mm, total length: 8,500 mm, total height: 2,300 mm, cutting length (max.): 560 mm, type of input current: three-phase, overall weight: 5,000 kg, W&H Matador 30 - CK 898 flat paper bag making machine, 1970s Brand: W&H Model: Matador 30 - CK 898 Year: 1970s Equipped with QMS 900 in-line printer (4 colors) Fitted with new printing cylinders, anilox rolls, and rubber rolls for all 4 printing stations. The electrical system has been replaced, and it features a new three-phase main motor with inverter, a mechanical and electric brake system, as well as a dedicated glue system with its own motor drive. Maximum paper width: 830 mm Maximum roll diameter: 1000 mm Inner core diameter: 70/76 mm Speed: 100–180 bags/min Lsdpsy Icv Dofx Abyern Forming plates: 115, 140, 190, 220, 300 mm Printing cylinders: 4 x 280, 2 x 350, 2 x 410, 2 x 480, 2 x 560 mm Machine can be inspected in production Available immediately

Condition: ready for operation (used), Year of construction: 2002, A Technibag bag-in-box filling machine for filling liquids into BIB bags is available. Products: wine/juice/etc., filling capacity: approx. 140/h, bag volume: 3l/5l/10l/20l. An on-site inspection is possible. Lrsdszb Nlkopfx Abysn

Condition: used, J-Tec Big Bag Discharge Station Bigbag Discharge stations for big bags with vibrating hopper Height adjustable Ljdoy Nttpopfx Abyern Max big bag dimensions: 120cm x 120cm x 280cm Overall dimensions: 180cm x 180cm x 345-500cm Material: Steel See our other listings

Condition: ready for operation (used), functionality: fully functional, color: green, Year of construction: 2008, operating hours: 1,000 h, The machine is being sold complete, including belt conveyor, handling unit, filling plant, and RC sack palletizing system. Comprises: Bakomat 4B handling unit, 10m³ hopper, conveyor trough type FR 600 x 1650, belt conveyor BTL 500x42,525, year 2005, belt conveyor BTL500/2/24-5.5m, year 2005, belt dosing scale Chrotec, vertical form-fill-seal machine Binder und Co, MK-X, 400 bags/hour with 25kg bags, approx. 13,000 operating hours, year 2005, sliding conveyor PD 2455/600, RC robot cell by Packmann d.o.o, year 2005, complete Kuka KR200 2E robot, robot year 2000, approx. 5,000 operating hours, pallet wrapping machine Plator LCN. All existing plans related to dimensions and further information are available in the attached PDF. Products produced: - Fine chippings 1-2mm - Fine chippings 2-4mm - Chippings 4-8mm - Premix chippings/sand - Play sand 0-2mm - Washed sand 0-4mm - Scented play sand - Concrete gravel 0-16mm - Rounded gravel 8-16mm Lrjdpfx Aevw Urwobysn

Condition: ready for operation (used), Year of construction: 1987, A Haver & Boecker bagging system for valve bags with a turbine system for powdered bulk materials is available. Weighing system: gross weighing, filling material: phenolic resin, bag layers: 2-4, filling weight range: 25kg-30kg, filling capacity: approx. 150-175bags/h, explosion protection class: EEx de II C T6, pack silo height: 800mm, load cell: Z3H2-A, certification valid until 2026. Documentation available. An on-site inspection is possible. Lrodpfxozbuvno Abysn

Condition: ready for operation (used), Year of construction: 1990, A Behn bag filling machine for powder and flakes is available. Accuracy class: Gkl X(1), filling material: resin powder, verification: 2019, filling principle: screw filling, filling nozzle diameter: 60mm, weighing range: 2kg-32kg, scale interval: 20g, inlet diameter: 350mm, flange diameter: 520mm, machine weight: approx. 1000kg. The control system of the machine has been overhauled. Including approx. 4000 bags and spare parts for the control system. An on-site inspection is possible. Lrjdpfxszbuvuo Abyon

Condition: new, Year of construction: 2026, functionality: fully functional, Complete Set of Cloth Bags for Dust Extractors Ledsy T Hbhopfx Abysrn Dimensions: Ø500 × 850 mm Designed for the following dust extractor models: CORMAK FM300 CORMAK FM300S The set includes two cloth bags: one upper bag with a mounting handle for installation on the top of the dust extractor, and one lower waste collection bag.