Used Bag Opener for sale (11,731)

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. Ljdpfx Ahjy Urtfetshk The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2025, condition: new, The Bag Opening Silo is a compact and flexible solution designed for efficient emptying of small and big bags containing cement, lime, and other powdered materials. Lhjdpjzcwrhjfx Ahtjk Big bags can be safely and easily unloaded using a forklift or other lifting equipment, ensuring a clean, safe, and controlled material transfer process. This system represents a practical solution for construction sites and production locations where bulk cement delivery by tanker is not possible, enabling continuous use of bagged materials. In addition to material emptying and dosing, the system can also be used as a temporary or permanent intermediate storage solution, providing full protection of the material from moisture, dust, and other external influences. The system can be easily connected to existing mobile and stationary concrete batching and mixing plants, allowing fast integration into the existing production process. Upon customer request, the system can be equipped with load cells for precise material weighing and control. The discharge capacity is 15 m³/h. Thanks to its compact construction, easy handling, and high functionality, the Bag Opening Silo represents a reliable and practical solution for handling powdered materials at various construction sites and production facilities. Available models: - BS 02 - Capacity: 2 m³ - BS 04 - Capacity: 4 m³ - BS 06 - Capacity: 6 m³

Condition: new, Bag opener, for opening bags containing recyclable materials such as "yellow bags," etc. Can be used as a stand-alone unit or as a component in a system, e.g., a sorting system. Throughput: 6-7 tons/hour Drive power: approx. 18 kW Dimensions: 8000 x 2350 x 2700 mm Weight: 11 tons Made to order Lhjdpfx Ahjdxwlzetsk Delivery time: approx. 30 weeks Further data and quotation upon request.

Condition: new, Year of construction: 2026, BULK PRODUCTS BAGGING LINE PUDAS-50NB is designed for automated packaging of bulk products (type of peat, turf, pellets, sand or simillar) by weight • The process is managed via color Touch-screen, multilingual Menu. • Suites for dosing into bags from 5 to 50 kg. • Capacity arround 3000 kg/hour. (depending on the product charactersitics and the size of the bags) operated by one person Lsdoi El Hrjpfx Ahtshk • Power supply 1ph., 230V, 3.2kW • Dimensions: L6.6m x W2.5m x H2.0m Made in Lithuania. CE certified.

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 Lhjdpfx Ajzf Nk Tehtjk CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: good (used), Year of construction: 2013, Saxon Bag Sealer Model SR1000 Adjustable temperature control Lsdpfx Asp At T Iehtohk Digital display Adjustable mast height Year 2013 Stainless steel Mobile on Castors Price € 5,950

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Industrial automated COMATEC Solids Big Bag receiving, handling, opening and discharge station for dry bulk solids. The system was designed to reduce manual handling of the bags. The operator places the full Big Bag in the loading area and attaches its lifting loops to the lifting crossbeam. The subsequent lifting, travel and positioning operations are carried out automatically by programmable electric hoists. The installation incorporates a double gantry-type supporting structure equipped with two VICINAY electric wire-rope hoists, each with a lifting capacity of 1,600 kg. The hoists are fitted with electric travelling trolleys and numerically controlled positioning. Each hoist has a 3 kW lifting motor and a 0.55 kW travelling motor, with an approximate lifting speed range of 1.8 to 14.5 m/min. Once positioned above the receiving station, the Big Bag is opened from the bottom by means of a removable and replaceable knife system, allowing rapid product discharge. The material then passes through a COMATEC DRG-300 lump breaker, a K-900-DC circular vibrating screener and a 2,000-litre buffer hopper. From the hopper, the product is metered by means of a tubular screw feeder. The system was originally designed for handling PTA powder, with an apparent bulk density of approximately 0.9-1 kg/dm³. It may also be suitable for other dry powders or granular products, subject to verification of product compatibility, material construction, ATEX classification and the required filtration and discharge arrangements. Main components • Double gantry structure for Big Bag handling. • Two VICINAY 1.6 t electric hoists. • Electrically driven travelling trolleys. • Programmable automatic positioning. Lhedpfx Aszvc Dushtsk • Big Bag lifting crossbeams. • Removable knife system for rapid bag opening. • COMATEC DRG-300 lump breaker. • K-900-DC circular vibrating screener. • 2,000-litre buffer hopper. • Tubular screw feeder. • Maintenance platform with open-grid flooring and safety railings. • Level instrumentation. • Associated pneumatic and electrical components. • Carbon-steel support structure.

Condition: good (used), OK Supersealer Continuous Bag Sealer Fully stainless steel Complete with stainless steel belt conveyor Lhodpszbnnkjfx Ahtsk Adjustable temperature control Stop start controls, E stop Height adjustable sealing head Mobile on castors and lockable feet The best bag sealer on the market Price € 9,500

Condition: good (used), Saxon Bag Sealer Stainless Steel Complete with stainless steel mesh belt conveyor Variable speed control Adjustable Temperature control Suitable for heavy gauge bags Mesh belt 250mm wide Machine dimensions 1800mm Long x 800mm Wide Price € 6,950 Lhedpfjzbnmgjx Ahtek

Condition: used, Year of construction: 2016, functionality: fully functional, We are offering this used NEWTEC BAG PALLETIZING Chimpal 600 palletizer, year 2016. Manufacturer: NEWTEC BAG PALLETIZING Model: Chimpal 600 Serial number: A1607 Year of manufacture: 2016 Type: 600.S1000.G067.053.OR3 Description: Palletizing Equipment Lhodpfx Aoyzzr Rohtjk The system can also palletize Euro pallets 800x1200 mm or CP1 1000x1200 mm. Maximum bag weight: 50 kg Capacity: up to 500 bags per hour Including sheet dispenser The system is currently in operation and can be inspected under working conditions until it is dismantled in September/October 2026. Test palletizing is possible during the summer. Newtec has been acquired by Haver & Böcker. Service for the palletizers is provided from Germany. A connected wrapper can be seen in the pictures, which is also for sale.

Condition: excellent (used), Saxon Continuous Bag Sealer Stainless steel Adjustable temperature control Ljdpfszcrlcox Ahtjhk Electric adjustable mast height Mobile on castors Excellent condition

Condition: used, Automatic Bag Filling Line Lodpfx Ahjyq Tb Ietohk Bag weights from 5kg to 1000kg Infeed with product de-clumper / product breakup breaker and sieve. Incline screw auger to high level hopper and mixer. Delivery system to bag filler where weighing takes place and metal detection before bag filling point. This system comes with a second mobile screw auger for filling 1000kg big bag / sacks Complete with all the controls for the smooth running of this bagging line. After Bagging the bags are sealed with a Saxon Bag Sealer and then stitched with a Singer Bag Stitcher.

Condition: excellent (used), Year of construction: 2016, BAG-IN-BOX SEMI AUTO FILLING MACHINE Smurfit Kappa Vitop, ITALY, 2016 Bag filling volume from 1L to 28L Pouch-up filling volume from 1L to 3L Touch screen control panel The semi-automatic filling machine Vitop has been designed to fill liquid and semi-liquid products in bags and pouches. Improved shelf-life of liquid thanks to revolutionary filling valve that separates vacuum and nitrogen circuits Easy to operate and maintain Precise electromagnetic flowmeter for filling accuracy Hygienic: Equipped with a cleaning a sanitizing program Suitable for Vitop® Original and Vitop® Compact Lhodpfx Ahoyr Awbstsk Simple to adjust between sizes Optional laminar air flow for filling in ultra clean conditions Especially well-suited to medium and Pouch-Up® fillers, the semiautomatic filling machine Vitop offers excellent performances and reliability. The filler uncaps the tap, inhales air from the bag before filling, fills the bag/pouch with the required quantity of liquid and recaps the tap. Nitrogen is inflated at the end of the cycle in order to better preserve the product inside and help to clean the valve neck. An airflow hood (option) provides mechanical decontamination around the filling body area through overpressure.

Year of construction: 2019, condition: used, functionality: fully functional, Approximately 250 pieces in stock. Price per piece: 100 Euros. A mix of used and new items. Ljdpfxjy Uc Sfe Ahtshk

Condition: good (used), Saxon Bag Sealer With Reverse Facility With Top Bag Cutter With Hydraulic Lift Mast Stainless Steel Lhjdjv Dm Epspfx Ahtok 230 Volt Power Supply Price € 3,950

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, The machine is being sold on behalf of the owner. The current owner will perform one more maintenance service for the new buyer. The machine has been used very little and has so far only packaged 6,547 units. It is ideally suited for packaging various loose food products, such as: Coffee Spices Ljdpfx Aozvd A Sshtjhk Rice Tea and much more. Since the machine is no longer needed, it is now for sale. An inspection and functional test can be arranged at any time. Condition: technically perfect, only slightly dusty. Location: 04668 Großbardau If you have any questions or are interested, please contact us by phone: Tel.: 0152 / 31381635

Condition: used, Year of construction: 2009, Production: • Bag type: Bottom seal bags • Suitable products: o Garbage bags o Fruit and vegetable bags o Various types of plastic bags Materials: • Processable materials: o LDPE o HDPE o MDPE Lhedpozk H E Sofx Ahtsk Technical Specifications: • Maximum sealing width (bag width): 1200 mm • Bag length (draw length): 150–3400 mm • Number of lanes: 1 • Maximum linear speed: 150 m/min • Maximum production speed: Up to 50 bags/min Control System: • PLC controlled • Operator interface terminal (HMI) • Print registration control • Servo-driven sealing bar Equipment: • Unwind unit • Photocell • Anti-static bars

Condition: used, maximum load weight: 24,150 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 08/2016, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,850 mm, total length: 13,620 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * Krone SZ Mega 2-axle semi-trailer with 435/50R19.5 tires - VIN: WKESZ00000727236 - * Air suspension - SAF axles - Disc brakes - Tires: 435/50 R 19.5 - * Loading area length: 13,620 mm - Overall length: 13,850 mm * Loading area width: 2,480 mm - Overall width: 2,550 mm * Internal height: approx. 2,850 mm - Overall height: 4,000 mm * Permissible total weight: 30,000 kg * Tare weight: 5,850 kg - Payload: 24,150 kg * German vehicle - German vehicle registration document - * Please arrange an appointment for viewing. * Contact: Mr. Andreas Vogel * The information provided on the internet is a non-binding description. * It does not constitute a guarantee of specific properties. * The seller is not liable for typing or data transmission errors. * Subject to changes, errors and prior sale. Lsdpfx Ajzvt T Tohtjhk

Condition: used, functionality: fully functional, COMPLETE POWDER MIXING, WEIGHING & BAGGING PLANT – RUBERG / PAGLIERANI Complete industrial plant for mixing, weighing, conveying, and bagging of fine dry powders. The equipment is currently installed, FULLY OPERATIONAL, and available for inspection and demonstration in operation. The equipment is offered either AS A COMPLETE PACKAGE OR AS INDIVIDUAL MACHINES / SYSTEMS. The plant has been used for the processing and packaging of fine mineral powders. EQUIPMENT INCLUDED: RUBERG CM 2000 – 2,000 KG MIXING SYSTEM Manufacturer: Gebr. Ruberg GmbH & Co. KG, Germany Model: CM 2000 Batch capacity: approx. 2,000 kg Industrial batch mixer SEW main mixer drive: 37 kW Main mixer speed: 35 rpm 2 side rotor drives: 2 x 5.5 kW Side rotor speed: 720 rpm Georg Büttner weighing system Weighing range: 0–2,000 kg Resolution: 1 kg RUBERG bucket elevator Elevator capacity: approx. 17 t/h Available separately or as part of the complete plant. RUBERG CM-ZE 1000 2SR – 1,000 KG MIXING SYSTEM Manufacturer: Gebr. Ruberg GmbH & Co. KG, Germany Model: CM-ZE 1000 2SR Year of manufacture: 2001 Machine No.: 168 / 11013 Lhsdpozv S Tlofx Ahtjk Useful mixing volume: approx. 1,000 liters Total mixing chamber volume: approx. 1,300 liters Industrial batch mixer Main mixer drive: 15 kW Main mixer speed: 40 rpm 2 side rotor drives: 2 x 7.5 kW Side rotor speed: 1,455 rpm Georg Büttner weighing system Weighing range: 0–1,100 kg Resolution: 1 kg RUBERG bucket elevator Elevator capacity: approx. 10 t/h Pneumatically operated discharge system Discharge connection: DN 630 Filling connection: DN 175 Inspection connection: DN 150 Available separately or as part of the complete plant. PAGLIERANI TP35 WEIGHING & BAGGING MACHINE WITH ULTRASONIC SEALING Manufacturer: Paglierani S.r.l., Italy Model: TP35 Type: Weighing and bagging machine for valve sacks Number of filling spouts: 1 Application: Finely ground dry powders Main features: Single filling spout Horizontal-axis filling turbine Integrated weighing system Load cell Pneumatic bag support and clamping system Pneumatic product flow control Product feeding hopper Electrical control cabinet Pneumatic controls Conveyor arrangement Ultrasonic valve sack sealing system BRANSON ULTRASONIC SEALING UNIT Manufacturer: Branson Ultraschall / Emerson Technologies Model: Digital Compact 222 Serial No.: DAB 08102435 A The Paglierani TP35 is also available separately. CONDITION: Used – fully functional. All equipment is currently installed and can be inspected and demonstrated in operation by appointment. DOCUMENTATION: Technical documentation, operating manuals, and technical drawings are available for several components. Further photographs, documentation, and technical information are available upon request. SALE OPTIONS: The complete plant is offered as one package, but the individual RUBERG mixing systems and PAGLIERANI bagging system can also be purchased separately. Price for individual machines/systems: on request. Location: Greece Availability: Upon agreement Inspection and demonstration in operation: By appointment Dismantling, loading, and transport can be discussed separately.

Condition: used, empty load weight: 6,553 kg, maximum load weight: 29,447 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2022, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, had accident, !!!Accident-damaged vehicle!!! | Krone SDP27 Profiliner | 1st axle can be lifted | EDSCHA canvas cover | BPW axles with disc brakes | Spare wheel holder | Lashing rail | Tool box | Tires: 385/65 R22.5 | Subject to errors, typing errors, and prior sale. Lhedpfx Aezv U Rtjhtek

Condition: used, empty load weight: 6,572 kg, maximum load weight: 29,428 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2025, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | Krone SDP27 Profiliner | 1st axle liftable | EDSCHA canvas cover | BPW axles with disc brakes | Spare wheel holder | Tool box | Pallet box | Tires: 385/65 R22.5 | Subject to errors, typos and prior sale. Lhsdpfxszv U Ryo Ahtjk

Condition: good (used), Saxon Bag Sealer Stainless Steel With Stainless Steel Conveyor 230 Volts Single Phase Power Height adjustable mast Mobile on castors Fixed adjustable feet also Conveyor belt dimensions 1500mm L x 400mm W Lhodpfov Dm Dljx Ahtjk Price € 5,950

Condition: used, maximum load weight: 28,584 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2010, next inspection (TÜV): 03/2027, loading space length: 1,362 mm, loading space width: 2,480 mm, loading space height: 2,780 mm, loading space volume: 94 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2010, Equipment: ABS, 3 - Axle Schmitz Cargobull SCS 24/L Tautliner with Joloda VIN: 133498 Chassis / Components: * Air suspension // Raise and lower * LSP = Load Spread Program * Kögel support legs * 3 x Rotos axle with disc brakes * Tires: 385/65 R22.5 * Remaining tread: Front ~80%, Middle ~90%, Rear ~60% * 2 x PVC storage box Body: * Tautliner Standard * Joloda * Equipment: 2 x sliders, 12 x wedges + bar * Certificate EN 12642 Code XL Lodpfxszviquj Ahtshk * Daimler load securing system 9.5 * Edscha * Side curtains * Aluminum slats * Lashing points * Pallet stop on both sides Weights: * Gross vehicle weight: 36,000 kg * Tare weight: 7,416 kg * Payload: 28,584 kg Other: * German vehicle * 1 previous owner * MOT / Inspection valid until 9/2026 ----A new MOT/inspection, as well as weight reductions or increases, are available upon request. _____ We won't leave you alone, even after the purchase: We will assist you in obtaining export or short-term license plates. We can also arrange for the transport of your vehicle within Germany. Just contact us – we will be happy to help! We speak German, English, and Russian. All information is without guarantee. Subject to changes, errors, printing and typographical errors, and prior sale. _____ About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. For many years, we have stood for experience, reliability, and competence in the field of refurbishment and sales of commercial vehicles. Our strength lies in the buying and selling of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a wide range of applications. With us, it's not just about the vehicle, but also about the service behind it. Fairness, integrity, and customer satisfaction are our top priorities. That's why we support you personally and reliably – from the first contact to the handover of your vehicle. See for yourself. We look forward to your inquiry! _____ Our service for you: Vehicle loading We will help you load your purchased vehicles. Special transports We will support you in organizing special transports. Export and short-term license plates We will help you obtain export or short-term license plates. Customs formalities We will also assist you with customs matters. Vehicle transport If you wish, we will arrange for the transport of your vehicle within Germany.

Condition: used, maximum load weight: 20,840 kg, overall weight: 27,000 kg, axle configuration: 3 axles, first registration: 07/2015, next inspection (TÜV): 07/2027, loading space length: 13,630 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, loading space volume: 90 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2015, Equipment: ABS, 3-axle Kögel SN 24 Standard Tautliner with Joloda rails VIN: 183367 Chassis / Components: * Air suspension // Raising and lowering * Jost support legs * 3 x SAF axles with disc brakes * Tires: 385/65 R22.5 * Remaining tread depth: Front: approx. 20/60% Middle: 40/50% Rear: 40/50% * Fifth wheel height approx. 1,150 mm * 3 x PVC storage boxes Body: * Tautliner Standard * Certificate EN 12642 Code XL * Daimler load securing system 9.5 * Multilock * Pallet stop on both sides * Edscha * Side curtains * 13x lashing points per side Weights: * Gross vehicle weight: 27,000 kg * Tare weight: 6,160 kg * Payload: 20,840 kg Other: * German vehicle * 1 previous owner * MOT and inspection valid until 01 / ---- New MOT/inspection as well as weight adjustments (increase or decrease) are possible upon request. _____ We won't leave you on your own, even after the purchase: We will help you obtain export or short-term registration plates. We can also arrange for the transport of your vehicle within Germany. Just contact us – we will be happy to assist you! We speak German, English, and Russian. All information is without guarantee. Subject to changes, errors, printing and typing errors, and prior sale. _____ About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. For many years, we have stood for experience, reliability, and competence in the field of refurbishment and sales of commercial vehicles. Our strength lies in the purchase and sale of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a variety of applications. With us, it's not just about the vehicle, but also about the service behind it. Fairness, integrity, and customer satisfaction are our top priorities. Therefore, we will support you personally and reliably - from the first contact to the handover of your vehicle. Convince yourself. We look forward to your inquiry! _____ Our service for you: Vehicle loading We will help you load your purchased vehicles. Special transports We will support you in organizing special transports. Export and short-term registration plates We will help you obtain export or short-term registration plates. Customs formalities We will also support you with customs matters. Lhjdpozv Ai Rsfx Ahtek Vehicle transport If desired, we will organize the transport of your vehicle within Germany.

Condition: used, maximum load weight: 29,412 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2019, next inspection (TÜV): 03/2027, loading space length: 13,600 mm, loading space width: 2,520 mm, loading space height: 2,690 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2019, Equipment: ABS, KRONE SD – PR.+PL. – SAFETY ROOF – BPW – LIFT – ----VEHICLE HISTORY * 1st OWNER * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST ----Vehicle Data Krone SD / DA06 * Registered: 10/2019 * 3-axle semi-trailer Body: Curtainsider / Sliding Tarp * Edscha sliding roof * Code XL * Storage box Axles & Suspension: BPW axles * Lift axle * Air suspension * 3 axles Brakes & Tires: Disc brakes * Pneumatic braking system * Tires: 385/65 R22.5 External Dimensions: Length (L): 13.86 m * Width (W): 2.55 m * Height (H): 4.00 m Internal Dimensions: Length (L): approx. 13.60 m * Width (W): approx. 2.52 m * Height (H): approx. 2.695 m Weights: Permissible total weight: 36,000 kg * Technically permissible total weight: 39,000 kg * Unladen weight: approx. 6,588 kg * Technically permissible axle load: 3 x 9,000 kg Load securing: DIN EN 12642 Code XL * VDI 2700 Sheet 12 * Daimler Load Securing 9.5 * Certified curtainsider body Inspections: TÜV (technical inspection) valid until 03/2027 * Inspection (SP) valid until 09/2026 Lsdpfx Ahezv Hbwjtshk * Last TÜV inspection passed without any defects * Last inspection passed without any defects ----* EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ * EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€ EXPORT REGISTRATION CUSTOMS EXW IN 10 MINUTES (APPROVED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS LICENSE PLATES AND 15 DAYS AUSTRIAN LICENSE PLATES EURO 1 TECHNICAL DATA SHEET VEHICLE RESERVATIONS PLEASE ONLY VIA THE E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. Changes, errors and prior sale reserved! You can find more vehicles on our website. Sale is exclusively subject to our general terms and conditions – see homepage. Important Note – Important Information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information for the purpose of initiating a contract. The information provided here is without guarantee and does not therefore constitute guaranteed characteristics.