Used Barcode Scanner for sale (447)

Condition: excellent (used), 3D systems Here we offer you a 3D printer. Solid-state Nd: YVO4with triple frequency Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000mW at the resin surface under standard conditions) Zaphyr TM coating system: Process: Replaceable coating agent Adjustment: Self-leveling and self-correcting Production layer: Minimum 0.05mm Maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominal in standard mode 0.13mm Detection of large lines Nominal: 0.76mm Maximum drawing speed Edge detection: 3.5m/sec. Detection of large lines: 25m/sec. Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Ambient conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirement: Size (WxDxH), unpacked: 1260mm x 2200mm x 2280mm Chodpfx Adenkalgodof Weight packed (no RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, FOR SALE LINE FOR CUTTING OUT DEFECTS, YEAR OF MANUFACTURE 2007 -BOARD FEEDING ROBOT -WEINIG POWERMAT 1200 PLANER -WOODEYE SCANNER -PAUL C14 OPTIMIZER -FEEDING AND RECEIVING TABLES -JENZ CHIPPER Chsdpfx Adewmprvsdsf MORE INFORMATION BY PHONE POSSIBILITY TO SEND A VIDEO OF THE MACHINE WORKING

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 17,000 h, Trumpf TruMatic 6000 FMC -1300 Sheetmaster + Gripmaster Manufacturer: Trumpf Type: TruMatic 6000 FMC -1300 Year of manufacture: 2006 Condition: used, very good. Regularly serviced by Trumpf. Machine is powered and in use. Operating hours NC hours: 70,305h Beam-on hours: 17,217h Control: Siemens Sinumerik 840 D Punching force: 220KN Laser power: 2700W Working area for laser operation approx.: 2585 x 1280 mm Working area for punching operation approx.: 2585 x 1370 mm Max. sheet thickness approx.: 8 mm Support tables Brush tables CE marking Standard equipment: Stable, easily accessible C-frame Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws 1 clamping claw Maintenance-free three-phase servo motors Parts chute 500 x 500 mm (sensor-monitored) HI-LAS high-pressure cutting TRUMPF laser: CO2 laser TLF 2700 Chsdpfx Aoxwmuasddjf High-frequency excitation Laser control TASC 3 Cutting head: Laser cutting head 5″ Laser cutting head 7.5″ Quick change device Cutting gas pressure setting programmable Distance control DIAS ContourLas Punching head: Hydraulic mono tool holder 360° rotation Programmable hold-down device Tool spray lubrication Punching slug extraction Control: Sinumerik 840D 10.4″ TFT color screen Teleservice Automatic switch-off 3.5″ floppy disk drive RJ45 network connection MDE interface Safety: Multi-beam light barriers Quick switch-off hydraulics Compact dust extraction system Options: Automatic switch-off Thread former Soft punch Adaptive stroke calibration Adjustment cylinder Individually openable claws Chip conveyor with container Multishear Multitool Control Brush tables Automation SheetMaster (loading and unloading during production) Scissor lift table Chip conveyor with container TrumaGripMaster TrumaSortmaster R4 TwinCarts (unloading) Spreading magnet Rotor scanner (unloading monitoring) Autolas Plus Remaining grid pallet 2500x1250mm

Condition: excellent (used), Year of construction: 2016, For sale: Prima Power BCe Smart 2220 (2016) panel bending machine. Main advantages: Servo-electric technology – up to 60% lower energy consumption and up to 70% lower maintenance costs High bending quality and precision Compact layout, operator-friendly design Semi-automatic operation, manual sheet loading/unloading Equipped with a safety system: laser scanners, light curtains Chjdpfx Aoxfiw Tsddsf Technical specifications: Max. bending length: 2250 mm Max. sheet length: 2850 mm Max. sheet width: 1500 mm Max. panel diagonal: 3000 mm Max. bending height: 204 mm Bending force: 32 t (320 kN) Pressing force: 52 t (510 kN) Processable steel thickness: up to 3.0 mm Minimum thickness: 0.5 mm Average power consumption: 4.0 kWh Additional equipment and features: Software: Master BendCam 2D, Tulus HMI Tool library, visual simulation of the bending process Remote diagnostics, user-friendly control interface Lowerable work surfaces – convenient parts handling Year: 2016 Condition: Used, well-maintained, connected, can be seen in operation. If you have any further questions, we will be happy to answer them.

Condition: used, mileage: 79,520 km, power: 210 kW (285.52 HP), fuel type: diesel, gearing type: automatic, first registration: 02/2022, next inspection (TÜV): 02/2025, emission class: euro6, color: black, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, soot filter, All the vehicles we offer are in stock and can be viewed at any time. All photos are original pictures of the respective vehicle. Special equipment: 3D Driver Display, Heated Adaptive Windscreen Wiper System (Magic Vision Control), Air Balance Package, Digital Light, Illuminated Door Sill Trims, Head-up Display (Front Vision Display), Black Headlining, Fuel Tank: Enlarged, Load Compartment Package, LM Wheels Front/Rear: 9x20 / 10x20 (10-twin-spoke, forged), Metallic paintwork, Multifunctional telephony, MBUX Entertainment multimedia system, Panoramic sunroof, Remote parking package, Front seats: climate control, Rear seat climate control, Burmester surround system Further equipment: Airbag driver/passenger side, Ambient lighting (extended scope), Exterior mirrors with ambient light and projection function, Front pelvic airbag (Pelvisbag), DAB tuner (digital radio reception), Standard design and equipment line, Easy-entry function, Driving assistance system: Attention Assist (drowsiness detection sensor), Driving assistance system: Crosswind Assist, Driving assistance system: Traffic sign recognition, Electric windows front + rear, Velour floor mats, LED rear lights, Induction charging cradle for smartphone, Interior: poplar wood, Interior mirror and exterior mirror left with automatic dimming, Body: 4-door, Automatic air conditioning (thermotronic), Communication module (LTE) preparation Mercedes me connect, Steering wheel with multifunction, Memory package, Mercedes-Benz emergency call system, Center console glass-look, black, Engine 2.9 Ltr. - 210 kW CDI KAT, Tire pressure monitoring system, Low-emission according to Euro 6d emissions standard, Front side airbag (sidebag), Service system: Fingerprint scanner for MBUX, Service system: MBUX Augmented Reality for navigation, Service system: MBUX Navigation Premium, Power door lock, Seat cover/upholstery: Leather, Smartphone integrated, Central display (OLED) Interior and comfort * Ambient lighting * Exterior temperature display * Electric exterior mirrors, heated and folding * Electric windows front and rear * Electric seat adjustment * Driver's seat with memory function * Head-up display (HUD) * Electric tailgate * Heated rear window * Wood interior * Cabin air filter * Keyless entry * Keyless-Go * Air conditioning * Leather multifunction steering wheel * Black leather interior * Center armrest * Electric parking brake * Shift paddles on the steering wheel * Sliding/tilting roof * Seat ventilation * Heated front and rear seats * Automatic dimming mirrors * Cruise control * Virtual/digital cockpit * Height-adjustable front seats * Central locking * Central locking with radio Multimedia and communication * Android Auto * Apple Car Play * AUX-In * Bluetooth * On-board computer * DAB * Hands-free system * Induction charging station * MP3 interface * Navigation system * Phone Box * Radio * Radio control on steering column * Sound system * Voice control * Touch screen * USB connection Safety and environment * 360 degree camera/area view * Distance warning system * ABS (anti-lock braking system) Csdovh Samjpfx Addehf * Adaptive bend/cornering light * All-wheel drive * All-weather tires * ASR (traction control system) * Automatic distance control (ACC) * Brake assist * Parking aid camera * Front and rear parking aid with reversing camera * Electric immobilizer * ESP (Electronic Stability Program) * High beam control (Light Assist)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, counter reading (black): 6,08,150, counter reading (color): 1,86,968, input voltage: 220 V, Equipment: auto duplex, RISO FW5230 A3 120PPM WITH SCANNER HS7000 + WIDE STACKING TRAY (RIGHT EXIT) ONLY 608K BLACK PRINTS AND ONLY 186K COLOR PRINTS IT COMES WITH THE RIGHT EXIT , GOOD FOR ENVELOPES OR THICK PAPERS NETWORK PRINT HEADS ARE WITHOUT LINES Chjdpfx Asxwc S Ijddjf IT COMES WITH THE REMAINING INKS. EXTRA NEW ORIGINAL INKS AVAILABLE WITH EXTRA COST , BUT AT LOWER PRICE.

Condition: used, Trumpf TruDisk 4002 (6 C) High-Power Solid-State Disk Laser with up to 4 kW The Trumpf TruDisk 4002 (6 C) is a state-of-the-art, efficient, and robustly built disk laser optimized for demanding industrial metalworking applications. Machine type: TruDisk 4002 (6 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: March 2016 Drawing number: 20-10-03-A204 No further testing was conducted in-house. Operating hours could not be read. The laser was operating flawlessly up until decommissioning. Features: - Top performance (up to 4 kW) - Excellent beam quality - Reliability & reflection safety - Energy-efficient, modular architecture - Ideal for a wide range of applications in the automotive industry, mechanical engineering, or surface processing Technical Highlights: - Power: From 80 W up to max. 4000 W in continuous operation (CW) - Wavelength: Approx. 1030 nm (Infrared, Yb:YAG) - Beam quality: Up to 2 mm·mrad (benchmark for exceptional quality), often with a range of 2–25 mm·mrad - Output options: Modular configuration – up to 4 outputs possible (depending on series) - Optional cooling: Water-cooled, e.g., via KLH chiller or integrated heat exchanger/compressor - Modular design: Robust optical layout, efficient operation, power factor correction, energy-saving modes, PROFIenergy interface Typical Applications: - Laser welding (including hybrid or scanner-guided), e.g., for bodywork or gearboxes - Cutting / flame cutting of metals with high precision - Surface processing, coating applications, etc. – professional industrial use Cjdpfjwzabqex Addehf Supply voltage: 380 V (-10%) to 460 V (+10%), 3-phase AC + PE Frequency: 50 – 60 Hz Power consumption: 22 kW / 23 kVA Rated current: 325 A at 400 V Protection class: IP54 Short-circuit resistance: Icn / SCCR 50 kA Weight: 850 kg Condition: Used Scope of delivery: (See images) (Specifications subject to change and errors excepted!) Should you have any further questions, feel free to contact us by phone.

Condition: like new (used), functionality: fully functional, overall weight: 170 kg, input current: 2 A, total width: 660 mm, total length: 1,500 mm, total height: 1,310 mm, input frequency: 50 Hz, HP DesignJet XL 3600 MFP – Fast, Quiet, and Reliable! This machine has only printed 1,107 m² and is in excellent, lightly used condition! 6 new (original) ink cartridges recently installed. Professional large-format printer/scanner/copier for CAD, GIS, and poster prints up to A0 size. Super fast: up to 180 A1 pages per hour, first print in under 30 seconds. Ultra-sharp lines (2400 x 1200 dpi) and easy operation via 15.6” touchscreen. Quiet operation, low maintenance costs, and energy-efficient design. Codpfx Adoxwl T Iodohf Features: - Printing, scanning, copying - USB, Wi-Fi, and Ethernet - Automatic roll change - Secure access and network functions - Compact and office-friendly Ready for immediate use – excellent condition! - Scan resolution: 600 dpi - HP Thermal Inkjet Technology - Optimized print resolution up to 2400 x 1200 dpi - Media size: 210 x 279 to 914 x 1219 mm - Paper weight: 60 to 328 gsm This machine has only printed 1,107 m² and is in excellent, lightly used condition! 6 new (original) ink cartridges recently installed. Worldwide shipping available.

Year of construction: 2025, condition: new, working width 1000 mm workpiece width - max. 0,5 - 50 mm sandingbelt width -- mm weight of the machine ca. 2,5 t With the SBM-L 1000 G1S2, which works in the dry process, in alternating operation Steel, stainless steel and aluminum can be machined. She deburrs and rounds the edges on the outer and inner contours of punched, laser, fine plasma or water jet cut workpieces with a thickness of up to 50 mm on both sides in just one operation. * Two sanding units, 1 each on the top and bottom, remove spatter and slight burrs on outside and inside edges of sheet metal. * A total of four sanding belts, 2 each on the top and bottom Underside, process the sheets on both sides at the same time. here All edges are softened or rounded, depending on the tool settings. * Machining on both sides saves time-consuming turning of the workpieces and edit twice. * All pairs of aggregates can be switched on/off separately depending on the application as well as to be set. * Including Siemens S7 control: - Easy and comfortable operation through intuitive user interface - High operating security through 3 password-protected user levels - Integrated program memory - USB / RJ 45 interface for data exchange or connection of external Components (e.g. barcode scanner) - Direct entry of material thickness via touch panel - All axes automatically adjust to preselected material thickness - Standby position for deactivated aggregates - Service-friendly (e.g. plain text error messages) consisting of: - Grinding machine SBM-L 1000 G1S2 (kit) - 4x sanding belts SBM 1000 with bar P60 SiC - Sanding belt SBM-L 1000 L=3125 B=70 P80 Cubitron 2 784F Cjdpouia Dqjfx Addehf - SBM-L tool wear compensation Siemens S7 - DDE 3002 dry suction - Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133 Further detailed technical data on request. The machine is in stock Niederlangen available immediately.

Condition: used, Machine description: 8K/hour inserting processing speed (Upgradeable to 10K/hr or 12K/hr) Base Unit 1 High-Capacity Sheet Feeder (2 Mobile Trolleys each with 5,000 sheet capacity) Reading Unit with 2D Barcode Reader which can read any type of code, 1D or 2D Cedpferkmiijx Addjhf Accumulator Unit Folding Unit Insert Feeder Station for BRE or enclosure insert 3 input envelope channels for C56, C5 and C4 sizes 2 output channels for filled envelopes, 1 output conveyor for C56 and C5, the other one for C4 The system can run all the 3 different type of jobs, C56, C5 and C4 in the same time The system run with Quadient license to see in real time in the Quadient Application the production for each channel. Vertical Stacker stacks filled envelopes and can be controlled intelligently to stack in separate lines "plug & play" mobile trolley system. Mobile Trolley's roll right to printer for 1-Touch Loading into DS-1200! Unlimited Programmable jobs automate most all system job changeovers (i.e. track, envelope size, separation, fold size, etc.) for the easiest job changeover (30 seconds) in the industry! The IMOS technology can also provides "Integrated Integrity" to record every movement of each document all the way until they are securely inserted into the envelope!

Condition: new, Year of construction: 2024, This machine is designed for top or side labelling on the flat containers. The LT-120 comes with 150 mm wide belt conveyor and is ideal for manufacturers which are packing the food, cosmetic, personal care, nutraceutical, electronic. Features: * Stepping Motor for fast and accurate labeling performance; * Controlled by Microprocessor, LED display; * Labels Counting feature / Production Run Counter; * Label sensor for Paper or Opaque labels; * Main structure of machine is made by anodize aluminium that CNC processing; * Height and angle are adjustable; * In Line Application or Independent Operation; * Modular design for easy maintenance / Quick and easy Changeover; * Heavy Duty Construction; * Capacity: up to 120 containers per minute. Cjdpfx Ajg Nttvsddjhf Options: * Inkjet printer; * Transparent Label Sensor; * Hot stamping coding machine; * Angled-Label Module; * Barcode Printer; * Passive Top pressing Roll; * Auto-Feeding Machine; * Conveyor speed adjustment possibilities.

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, warranty duration: 18 months, input voltage: 240 V, measuring range X-axis: 250 mm, measuring range Z-axis: 320 mm, overall weight: 100 kg, feed length X-axis: 250 mm, feed length Z-axis: 320 mm, Equipment: type plate available, Modular extensible base basic Contour measuring system with down-direction Z-Scanning Anytime optionally via software updatable functions: - Up down measurement - Roughness measurement - Motorized Y-Supporting table - QR-Code Scanner (for tracingarms and reference files) - data export to QS-Stat (dfq file) - dominant waveness Scope of supply: - Basic mechanics with integrated Y-adjustment table (17mm way) - Integrated control system - ConturoMatic Software; manual - PC W11/64Bit; 24"TFT flat screen; - Protective cover, sturdy and water repellent (material), Commodity-Code 63079098 Technical data: Measuring range 250mm Measuring range 320mm Resolution 1nm Sensing system optically incremental Inaccuracy +/-(0,9µm+L/100)µm* [L=mm] Measuring speed 0,1-3mm/s self-optimizing Positioning speed up to 25mm/s Gauging force regulation Table load 35kg Granite precision guides Weight 95kg Chsdpexgqlhofx Addjf

Condition: used, Trumpf TRUMPF TruDisk 4002 (4 C) High-Performance Solid-State Disk Laser with up to 4 kW Output Type: TruDisk 4002 (4 C) The TruDisk 4002 is a powerful, energy-efficient, and modular laser solution – ideal for industrial manufacturing environments with demanding requirements for quality, precision, and automation. The combination of high power, excellent beam quality, and smart factory features makes it particularly attractive for modern production lines. System type: TruDisk 4002 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: May 2012 Drawing number: 20-10-02-A3* No additional tests were carried out in-house. Operating hours could not be read out. The laser operated flawlessly until decommissioning. Technical features: Output & wavelength: 80–4000 W at 1030 nm Beam quality (BPP): typically 2 mm·mrad (up to 25 mm·mrad, depending on configuration) Modular & compact: footprint < 1 m², modular design simplifies maintenance/service Efficient energy & cooling systems: energy-saving modes, active power factor correction, pulse function to reduce consumption Flexible cooling: integrated heat exchanger (5–28 °C), optional with compressor (up to 38 °C inlet temperature) Reflection-resistant: special resonator design also suitable for highly reflective metals Industry 4.0 capable: extensive sensor technology and data interfaces for condition monitoring, OPC UA, predictive maintenance Chsdpfx Adewzahdedsf Application areas: Scanner & hybrid welding (e.g. automotive body manufacturing, shipbuilding) High-speed cutting, including on reflective metals Flame cutting & surface processing Laser cladding, hardening, deep penetration welding where high precision is required Technical data: Supply voltage: 380 V (-10%) to 460 V (+10%), 3AC + PE Frequency: 50 – 60 Hz Power consumption: 23 kW / 25 kVA Rated current: 34 A at 400 V Protection rating: IP 54 Short-circuit strength: Icn / SCCR 50 kA Weight: 850 kg Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) We would be happy to answer any further questions by phone.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, AMR MiR500 – Year 2018 – in excellent condition General specifications Payload: 500 kg Dimensions: 1350 mm (length) x 920 mm (width) x 320 mm (height) Maximum speed: Up to 2.0 m/s (with speed upgrade kit) Acceleration: 1.0 m/s² (with full payload) Unladen weight: 250 kg Navigation and safety Navigation: Autonomous, equipped with laser scanners and 3D cameras for 360° vision and obstacle avoidance Chjdpfx Aexxzbdjddef Safety: ISO 13849-1 compliant, with 5 integrated safety functions and emergency stop Minimum turning radius: 2200 mm (standard) Minimum doorway width: 1950 mm (normal operation) Power and battery Battery: 48V Li-NMC, 2 kWh capacity Charging: Compatible with MiRCharge 500, cable charger, or MiRCharge 48V Charging time: Approx. 1 hour for 10–90% charge using MiRCharge 48V Connectivity and I/O Connectivity: Dual-band WiFi (AC/N/G/B) and Ethernet with Modbus protocol I/O: 4 digital inputs, 4 digital outputs Safety I/O: 8 digital inputs, 5 digital outputs Environmental conditions Operating temperature: +5°C to 40°C Storage temperature: -10°C to 60°C Humidity: 10–95% non-condensing Price: €16,500.00 (+VAT)

Year of construction: 2005, operating hours: 51,230 h, condition: like new (used), functionality: fully functional, machine/vehicle number: C130 86/357, The machine is currently being completely overhauled. All mechanical wear parts and repair parts are being replaced. The complete electronics will be brought up to date. Available from Q2 2025, the price is approx. 50% of a new machine Secure this unique opportunity. Contact us, we can also integrate your specific requirements. Technical data C130 Output: max 120 cartons Pitch: 5" Carton: max.100x85x150mm No. of Blister max.10 Blister stack height: max. 80mm Type of closure: tuck-in Code Reader:LEATUS 6012 with Scanner Cjdpetpazisfx Addjhf 2 Flap Discharge Conveyor GuK: Leaflet Folder

Condition: used, Complete machine: - 5510 sheet feeder - 4720 Reader module with VEKTOR camera - 4810 Mounting module - 6015 Folding module - 4507 Sequencer module, - 4806 pre-assembly module, - 5552 Insert module Chedpjqzhr Ijfx Addjf - 5552 Insert module - 501 Base unit module - 5571 Envelope feeder module, - 7512 Bypass module - 5535 Stacker module - Bicos 2009 operating system - ANV/DBDI PC for the control integrity system. Reading: VEKTOR camera Can read all types of barcodes, OCR, Datamatrix, barcodes and OME. Bicos version 2009 and ANV/DBDI version V 9.1.5.0 The entire system is configured to read Datamatrix. All modules are tested and packaged. Meter readings can be requested.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, number of print heads: 1, resolution (max.): 600 dpi, paper width (min.): 25 mm, paper width (max.): 110 mm, paper height (min.): 3 mm, paper height (max.): 498 mm, Equipment: documentation/manual, Toshiba has combined its experience, know-how and commitment to quality and reliability with market leading technologies to offer what will quickly become the industry standard. The B-EX4T3 is a step up from the combination of all what made Toshiba a world renowned player in the printing industry with technical standards often used in other barcode systems. The result: a high resolution printer that delivers super high accuracy in print and peel operations alongside Toshiba’s renowned image quality, performance, reliability and the flexibility in any type of environment. - Optimum image quality with up to 600 dpi print resolution. - Enhanced performance at very attractive running cost. - Specifically designed to enable printing and peeling of very small labels. From exposure, warranty expired. Mileage 5-10 meters. Printer without incidents, head without holes. Cedpfju Snfqsx Addjhf Delivery terms - EXW

Year of construction: 2025, operating hours: 10 h, condition: new, functionality: fully functional, overall weight: 800 kg, total length: 120 mm, total width: 900 mm, total height: 1,900 mm, laser power: 30 W, laser wavelength: 1,064 nm, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Chsdpfexuvk Ejx Addsf The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: used, Trumpf Trumpf TruDisk 4002 (6 C) High-Power Solid-State Disk Laser with up to 4 kW The Trumpf TruDisk 4002 (6 C) is a state-of-the-art, efficient, and robustly engineered disk laser optimized for demanding industrial metalworking applications. System type: TruDisk 4002 (6 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: March 2016 Drawing number: 20-10-03-A204* No further in-house inspection was performed. Operating hours could not be read out. The laser was operating flawlessly until decommissioning. It offers: - Top performance (up to 4 kW) - Excellent beam quality - Reliability & reflection safety - Energy-efficient, modular architecture Ideal for diverse applications in the automotive industry, mechanical engineering, or surface processing. Technical Highlights: - Power: From 80 W up to max. 4000 W in continuous operation (CW) - Wavelength: Approx. 1030 nm (infrared, Yb:YAG) - Beam quality: Up to 2 mm·mrad (a benchmark for excellent quality), typically ranging from 2–25 mm·mrad - Output options: Modular configuration – up to 4 outputs possible (depending on model) - Optional cooling: Water-cooled, e.g. via KLH chiller or integrated heat exchanger/compressor - Modular design: Robust optical configuration, efficient operation, power factor correction, energy-saving modes, PROFIenergy connectivity Typical applications: - Laser welding (also hybrid or scanner-controlled), e.g. bodywork or gear assemblies - Cutting / flame cutting of metals with high precision - Surface processing, coating applications, etc. – for professional industrial use Supply voltage: - 380 V (-10%) to 460 V (+10%), 3-phase + PE - Frequency: 50 – 60 Hz Chedpowzaiuefx Addsf - Power consumption: 22 kW / 23 kVA - Rated current: 32.5 A at 400 V - Protection class: IP 54 - Short-circuit strength: Icn / SCCR 50 kA - Weight: 850 kg Condition: used Scope of supply: (see picture) (Subject to modifications and errors in technical data and specifications!) We are happy to answer further questions for you by phone.

Year of construction: 2025, condition: new, We present to your attention a high-quality, high-performance printer for printing paper labels. This printer has a print head with a resolution of 300 dpi, and the maximum print speed is 200 mm/sec. Robust and reliable printer design, advanced functionality, while maintaining cost makes this printer one of the best in its class. Chedpfxsgqkqyo Addsf - It can print barcode and QR code on different shape tag. - Ink Ribbon Saving. - The ink ribbon feeding is temporarily stopped when the over 30 mm blank is included in print data. - Variety of Tag Size Printable. Equipped with the 12 dots/mm head (300 dpi) Thermal ribbon saver (for 30 mm of longer printing) Maximum Print Speed: 200 mm/second Stacker height : 150 mm Max. printing lenght : 300 mm Auto stacker inclusive : 150 mm in height

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): 1% Full Deflection: 1.0 ms 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hr Drift (after 30 min): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. Cjdpfx Aexp Iybjddohf For further questions, we will be happy to assist you by phone.

Year of construction: 2024, condition: new, We present to your attention a high-quality, high-performance printer for printing paper labels. This printer has a print head with a resolution of 300 dpi, and the maximum print speed is 200 mm/sec. Robust and reliable printer design, advanced functionality, while maintaining cost makes this printer one of the best in its class. - It can print barcode and QR code on different shape tag. - Ink Ribbon Saving. - The ink ribbon feeding is temporarily stopped when the over 30 mm blank is included in print data. - Variety of Tag Size Printable. Csdpfor Nu Aljx Addshf Equipped with the 12 dots/mm head (300 dpi) Thermal ribbon saver (for 30 mm of longer printing) Maximum Print Speed: 200 mm/second Stacker height : 150 mm Max. printing lenght : 300 mm Auto stacker inclusive : 150 mm in height

Condition: excellent (used), Rofin Type: PowerLine Pico 532 - 10 CombiLine Basic WT VLM - Visual Laser Marker VLM is an innovative, flexible marking software that is used on Rofin laser systems. laser systems. VLM follows the WYSIWYG concept and offers the flexibility of a the flexibility of powerful yet easy-to-use software. VLM can be used to apply markings of various types such as matrix codes, barcodes and serial numbers, barcodes and serial numbers. Depending on the material, even the smallest markings are possible. The innovative software ensures reliable marking of reliable marking of flat and curved surfaces, and οη-the-fly applications are also possible. Common formats such as DXF or optionally PDF are supported for importing layouts. Technical data of the laser: Laser head Wavelength: 532 nm Power: approx. 3W at 400 kHz Pulse frequency: 200-800 kHz, Beam quality: TEMoo Energy per pulse: 7.5 μJ at 400 kHz , 3.5 μJ at 800 kHz Peak power: 7.5 kW at 400 kHz Dimensions: approx. 450 mm X 168 mm X 235 mm (L X W X H) Weight: approx. 14 kg (with standard Galvo RM10) 19" supply unit Dimensions: 2HEx19''x350 mm(HxWxD) Weight: approx. 20 kg Cooling: integrated air cooling Supply voltage: 115 - 240 V +/-10%50 ا Hz / 60 Hz Power consumption: approx. 800 W Ambient temperature: 15°- 35°C, non-condensing Air flow rate: 80 m³/h PC Mini-ΙΤΧ SSD removable disk 250 GB Software at least VLM 5.2 Windows Embedded Standard 7 Other options 19" panel can be removed Positioning aid Adjustable 3-foot support The following components were additionally selected from the standard scope of delivery: Ρ255-532 lens ٢= 255 mm: 532 nm Labeling field 180 mm X 180 mm S10-532 Galvo head unit S10: 532 nm Galvo head S10 including selected objective, holding set for optics and protective protective glass or protective glass slider. Size: approx. 165 mm X 118 mm X 147 mm (L X W X H) Weight: approx. 4.4 kg CombiLine Basic (V2): The CombiLine Basic is a user-friendly laser class 1 system (in accordance with EN 60825-1 ), which, thanks to the use of largely preconfigured functional preconfigured function modules, enabling optimum adaptation to customer-specific requirements. The frame contains all control components and functional elements. functional elements. An aluminum plate with standard or customer-specific workpiece holders, an aluminum plate with a standard drilling pattern serves as the basis. The fully automatic, electrically operated door enables workpieces to be loaded and unloaded. Chjdpfx Astz Rk Hoddjf The machining area can be viewed at any time through the large observation window. A programmable z-axis, including control and motor, is included as standard, is used for vertical focus adjustment. This takes place in automatic mode according to the specifications of the marking program. Technical data: Dimensions: approx. 1200 mm X 1750 mm X 800 mm (W X H X D) Door opening: approx. 560 mm X 680 mm (W X H) Weight: max. 380 kg Connection: 230V+/-10%: 1/Ν/ΡΕ Power: max. power consumption 3 kVA Monitor: 15" TFT with touch function Z-axis: max. 300 mm stroke Workpiece: max. 20 kg Weight (incl. holder) max. 690x 490x 293 mm (W x L x H)

Condition: new, Year of construction: 2024, This machine is designed for labelling on the cylindrical products side. The LR-120 comes with 150 mm wide belt conveyor and is ideal for manufacturers which are packing the food, cosmetic, personal care, Csdpsg Ntutofx Addohf nutraceutical, electronic. Features: * Stepping Motor for fast and accurate labeling performance; * Controlled by Microprocessor, LED display; * Labels Counting feature / Production Run Counter; * Label sensor for Paper or Opaque labels; * Main structure of machine is made by anodize aluminium that CNC processing; * Height and angle are adjustable; * In Line Application or Independent Operation; * Modular design for easy maintenance / Quick and easy Change over; * Capacity: up to 120 containers per minute. Options: * Inkjet printer; * Hot stamping coding machine; * Barcode Printer; * Transparent Label Sensor; * Conveyor speed adjustment possibilities.

Condition: not inspected (used), Bluhm Systeme marking lasers Here we offer you a Bluhm Systeme marking laser. Bluhm Systeme marking laser fiber laser e-SolarMark FL Without function guarantee (untested) Introduction: The e-SolarMark FL10W and 30 W are class IV lasers in accordance with the lEC 825 and EN 60825 (standards for end-user applications). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a protection class product in accordance with the above-mentioned directives. The e-SolarMark is a laser system for marking and engraving plastics, metals and foils while stationary or in motion. Technical specifications e-SolarMark description The e-SolarMark system consists of two main components: 1. the marking unit with laser head (scanning head) with focusing lens. 2. the control unit contains the power supply unit, electronic control system and firmware for the system function, I/O slots inside. The e-SolarMark includes a fixed galvo scanning head equipped with a lens for a square marking field with standard dimensions of 70 X 70 mm Laser specification in standard version Laser Type---Fiber Laser Laser output power---FL2 model: 19W; typical Wavelength---1062 nm typical Internal Modulation---20 to 80 kHz Scanner Head Description: Scan Head---Two galvanometric mirror scanners with hard, highly reflective dielectric coating. F-Theta Lens types and their characteristics: Lens marking field 70x70 mm to 300 x 300 mm Focus distance B 192 mm Working environment Conditions: Chsdpfeq Rtz Hox Addef Relative humidity up to 80% non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length marking/control unit 3 m Weight marking unit 5 kg Weight of control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption FL2 model 450W Type: e-SolarMark FL Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.