Used Basket Dishwasher for sale (1,207)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Universal dishwasher HOBART UXS Bäko-10A Hobart UXS Bäko-10A, year of manufacture 2018, fully functional, functionally tested and cleaned, incl. rinsing basket and holder for trays. Machine with integrated rinse aid and rinse aid dispenser. Hobart SMART control with 2 / 4 / 6 minute wash programme as well as intensive and hygiene programme. Detergent dosing, 15.6 kW connected load, 380 / 400 V. Current new price: over EUR 13,000 net (!) Dimensions (outside): UXS Bäko-10A, year of manufacture 2018 Width: approx. 80 cm, depth: approx. 95 cm, height with closed door: approx. 199 cm Washroom dimensions: approx. 60 x 76 cm, approx. 86 cm drawer height Itedsv R E Ehopfx Adwsb PRICE: EUR 6,950 net - Available immediately. Currently also in stock as a comparable used machine from 2015, in good condition (slightly cheaper) or UXT (double size) year 2017. If you are interested, we look forward to receiving your enquiry.

Year of construction: 2018, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: M iClean HM mit GIO, Our 10 Meiko pot washers with the model designation DV 80.2 PW and built in 2015 2016 are for sale. Condition good, ran partly with soft water. These machines are former leasing devices. With 6 months spare parts guarantee. Preventive maintenance was always carried out with the replacement of some wearing parts. Inspection and test run on site possible and desired. Technical specifications: Performance up to 60/40/17 baskets (corresponds to approx. 1080/720/306 plates or e.g. 2160/1440/612 glasses) per hour Program run times: 60/90/210 seconds Basket dimensions in mm: 500 x 500 Insertion height: 440 mm Tank capacity: 22 l Water consumption per basket: 2.6 l Tank heater: 1.3 kW Boiler: 7.5 kW (cold water) Boiler: 9.0 kW (hot water) Material: stainless steel Connected load: 400 V / 11.2 kW (cold), 9.7 (warm) Dimensions: W 635 x D 750 x H 1470/2050 mm Isdpfxjpy Dxre Adwstb Electrical installation: Electrical connection: three-phase current 3 NPE, 400 V, 50 Hz. The circuit corresponds to the regulations of the VDE Water installation: The dishwashers can be connected to the fresh water network without the interposition of safety fittings. Minimum flow pressure 0.6 bar, maximum pressure 5 bar. The installation regulation EN 1717 must be observed. expiry ¾ ̋. On-site wall drain max. 700 mm high. Length of the connection lines approx. 1.8 m from the dishwasher. Collection of the machines desired. Dispatch by freight forwarder at cost assumption possible.

Condition: used, Complete Rhima dishwashing kitchen with basket conveyor machine, a professional warewashing solution for the hospitality industry and large-scale kitchens. Equipped with all necessary components for efficient and hygienic washing. Reliable, durable, and designed for intensive daily use. Brand: Rhima Model: WD-213 Isdexn Nfispfx Adwetb Delta Horeca Model: 0018198 Dimensions of complete setup (LxWxH): 545x272x210 cm Connection value: 400V / 36 kW

Condition: new, KitchenAid stainless steel kitchen island Stainless steel island kitchen unit for cooking, sinking, cooling and storage. Kitchen studio exhibit KitchenAid KDIX 8810 Integrated sink with dishwasher Iedpfx Aotpwy Ujdwetb KitchenAid KRDD 9010 built-in refrigerator with drawers Cut-out for cooking island with hob fan Damixa sink mixer tap Base units for additional appliances Large drawers with plenty of storage space for utensils KitchenAid KDIX 8810 dishwasher The dishwasher is integrated into the sink and can be conveniently loaded from above. Brand: KitchenAid Model: KDIX 8810 Number of place settings: 5 Washing programs: 5 Quick rinse program: 1 Dish diameter: max. 29 cm Plus X Award The KDIX 8810 In-Sink™ dishwasher received the award in the Ease of Use category KitchenAid KRDD 9010 built-in refrigerator Brand: KitchenAid Model: KRDD 9010 EAN: 8003437128844 Refrigerator with drawers Ventilated baskets Quick cooling function Tropical function (anti-condensation) Automatic defrost Key lock Antibacterial filter Gross capacity refrigerator: 170 l Climate class: T Noise level: 39 dB Automatic defrost (cooling unit) Refrigerator temperature range: 16 - 43 °C Energy efficiency class (old) A+ Annual energy consumption: 128 kWh Dimensions (HxWxD) Cooking island: 940 x 2410 x 1250 mm Sink (bowl size): 200 x 280 x 400 mm Built-in hob dimensions: 840 x 490 mm Under-worktop installation dimensions: 600 x 780 mm Further items in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 10/2021, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2021, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Itjdpfx Aeyamvdedwob Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 6,941 kg, axle configuration: 3 axles, first registration: 05/2019, total length: 13,600 mm, total width: 2,480 mm, suspension: air, color: white, Year of construction: 2019, Equipment: full service history, power assisted steering, Technical specifications Isdpfxex Tzgxo Adwstb Axeles producer - SCHMITZ ROTOS Air suspension SCB sliding roof, Sliding roof also sliding to rear 2 plastic toolbox with cover holder, sleeves and drawer behind the units 8 Rows Wooden rigging boards EBS 2S/2M, with roll stability program ROTOS SCB running gear (disc brakes) Bolted basket-type spare wheel holder for 2 spare wheels behind unit Anti-theft rope through the curtain buckles+holder on front bulkhead 6 tyres - 385/65R22.5 (11.75x19.5) Internal Length/width/heigth - 1362 cm / 248 cm / 283 cm Payload - 28 300 kg Gross weight - 39 000 kg Total tare weight - 6692 kg 3 axles Lashing holes starting in the outer frame beginning from the first side post Pallet stop straight, on both sides on outer frame 19 mm high 4 pairs ferry hold shakles 2 wheel chocks with holders Load securing: Body cert. acc. To EN 12642 XL Full height ALU double hinged door double integral lock rods 28 mm phenolic plywood floor, max 7100 kg forklift axle load tested to DIN EN 283

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 6,783 kg, axle configuration: 3 axles, first registration: 02/2019, total length: 13,620 mm, total width: 2,480 mm, suspension: air, color: white, Year of construction: 2019, Equipment: full service history, power assisted steering, Technical specifications Axeles producer - Schmitz Rotos Full air suspension Lifting, Sliding roof Plastic toolbox with cover holder 7 Rows Aluminium rigging boards Electronic brake system EBS Anti-lock braking system ABS Disc brakes Basket for 2 spare wheels Customs cable Curtain with anti-theft protection 1800mm high (6+1) tyres - 385/55R22.5 (11.75x22.5) Length/width/heigth - 1362 cm / 248 cm / 295-305 cm Load capacity - 27 000 kg Allowable gross vehicle weight - 39 000 kg Ijdpjxrr Etofx Adwjtb Own weight - 6 783 kg 3 axles

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 01/2018, total length: 13,410 mm, total width: 2,490 mm, suspension: air, color: white, Year of construction: 2018, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SAF Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 45 mm Plastic toolbox with cover holder Fuel tank, 240 l Electronic brake system EBS Anti-lock braking system ABS Itedpfx Adjxw Rhqoweb SAF (disc brakes) Thermometer Ventilation flap, small, at rear, right side, half way up Contact switch for rear door Low noise aluminium floor, suitable for PIEK floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Variable height double deck with 22 ALU beams Loading capacity 33 / 66 euro paletts Length/width/heigth - 1341cm/249cm/265cm Max weight - 36 000 kg Own weight - 8 847 kg 3 axles Pallet rack for 24 Euro pallets

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 6,783 kg, axle configuration: 3 axles, first registration: 09/2018, total length: 13,620 mm, total width: 2,480 mm, suspension: air, color: white, Year of construction: 2018, Equipment: full service history, power assisted steering, Technical specifications Axeles producer - Schmitz Rotos Full air suspension Lifting, Sliding roof Plastic toolbox with cover holder 7 Rows Aluminium rigging boards Electronic brake system EBS Anti-lock braking system ABS Disc brakes Itjdpfx Asxrrqcjdwjb Basket for 2 spare wheels Customs cable Curtain with anti-theft protection 1800mm high (6+1) tyres - 385/55R22.5 (11.75x22.5) Length/width/heigth - 1362 cm / 248 cm / 295-305 cm Load capacity - 27 000 kg Allowable gross vehicle weight - 39 000 kg Own weight - 6 783 kg 3 axles

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 6,783 kg, axle configuration: 3 axles, first registration: 03/2018, total length: 13,620 mm, total width: 2,480 mm, suspension: air, color: white, Year of construction: 2018, Equipment: full service history, power assisted steering, Technical specifications Axeles producer - Schmitz Rotos Full air suspension Lifting, Sliding roof Plastic toolbox with cover holder 7 Rows Aluminium rigging boards Electronic brake system EBS Anti-lock braking system ABS Disc brakes Basket for 2 spare wheels Itedpfx Adjxrrp Ejwsb Customs cable Curtain with anti-theft protection 1800mm high (6+1) tyres - 385/55R22.5 (11.75x22.5) Length/width/heigth - 1362 cm / 248 cm / 295-305 cm Load capacity - 27 000 kg Allowable gross vehicle weight - 39 000 kg Own weight - 6 783 kg 3 axles

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 6,783 kg, axle configuration: 3 axles, first registration: 03/2018, total length: 13,620 mm, total width: 2,480 mm, suspension: air, color: white, Year of construction: 2018, Equipment: full service history, power assisted steering, Technical specifications Axeles producer - Schmitz Rotos Full air suspension Lifting, Sliding roof Plastic toolbox with cover holder 7 Rows Aluminium rigging boards Electronic brake system EBS Anti-lock braking system ABS Disc brakes Basket for 2 spare wheels Customs cable Iedpfx Adexrrpxswetb Curtain with anti-theft protection 1800mm high (6+1) tyres - 385/55R22.5 (11.75x22.5) Length/width/heigth - 1362 cm / 248 cm / 295-305 cm Load capacity - 27 000 kg Allowable gross vehicle weight - 39 000 kg Own weight - 6 783 kg 3 axles

Condition: used, Year of construction: 2016, operating hours: 1,271 h, Equipment: all wheel drive, Articulated Telescopic Boom Lift Niftylift HR21 Hybrid MKB - Working height: 21 m - Platform height: 19 m - Lateral outreach: 12.6 m - Hour meter approx. 1,300 hours (not legible) - Powered by 48V electric motor with integrated charger and 3-cylinder Kubota diesel engine - Tire size: 33x12x20 - Tread depth: 30-35 mm - Non-marking tires - Wheelbase: 2,600 mm - Drive configuration: 4x4 Itsdpfx Ajyad Svsdweb - Overall dimensions (L x W x H): 6,500 x 2,330 x 2,150 mm - Weight: 6,632 kg - Basket load: 225 kg - Rotating basket - Hydraulic basket arm: 1,520 - Basket dimensions (L x W): 1,630 x 620 x 1,100 mm - Basket and ground controls - Gradeability: 40%, 22° Further details and additional images available on request. This description does not constitute a binding offer and may include errors. No guarantee on the listed specifications. Please also visit our homepage.

Condition: new, power: 210 kW (285.52 HP), color: orange, Field of application: Mining Empty weight: 44.000 kg Productivity: 150 tph Iodpfox D Dchex Adwotb Mobile, trailer, dry, primary-secondary, crushing plant, Q=80-150 tph the plant is used for work in soft and medium hard rock, max. input grain size – 650 mm, hopper (filling with a dumper or loader and excavator basket), grizzly or wooble feeder for eliminate clay,earth, production capacity 80 – 150 tons / hour, impact – rotary crusher, separation with 4 pcs. deck, three axle trailers, all belt conveyors, electrical cabinet of the plant, plant weight 44 tons, plant power P = 210 kW, SKF bearings and Siemens electronisc, from Germany. 2 years garantie.

Condition: used, Year of construction: 1994, material width 500 mm coil weight 3,0 t material thickness 0,2 - 2,5 mm coil internal diameter 470 - 530 mm coil external diameter 1400 mm no. of straightening rolls 9 straightening roll diameter 40 mm number of inlet and outlet rolls 4 material cross-cut 1200 mm² speed 1,5 - 30 m/min dimensions decoiler (WxDxH) 1,9 x 0,6 x 1,7 m weight decoiler 1,1 t Itedpfovut Eqex Adwjb dimensions straightener (WxDxH) 3,3 x 1,3 x 2,7 m weight straightener 3,0 t - Straightening machine RYD 40 x 500 with infinitely variable drive (driven lower straightening rolls), straightening rolls individually adjustable by motor, supporting rolls, outlet roller basket - Decoiler DY 500 x 3000 with hydraulic auxiliary drive, pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, hydraulic insertion aid, hydraulic coil lifting device - coil loop control can be offered without or with putting into operation in given condition

Condition: excellent (used), functionality: fully functional, overall weight: 7,490 kg, axle configuration: 4x2, first registration: 04/1998, next inspection (TÜV): 01/2026, suspension: steel, Year of construction: 1998, mileage: 1,62,990 km, power: 114 kW (155.00 HP), fuel type: diesel, emission class: euro2, fuel: diesel, load capacity: 200 kg, Equipment: crane, MAN 8.163 LC/Ruthmann Aerial Platform TL 300/30 meters/TÜV: 01.2025. • Manufacturer: MAN • Model: 8.163 LC • Mileage: 162,990 km • First registration: 04/1998 • Power: 114 kW/155 hp • Drive configuration: 4x2 • Aerial work platform: Ruthmannsteiger TL 300 • Working height: 30 meters • Transmission: Manual • Suspension: Leaf spring (front and rear) • Basket capacity: 200 kg • 4 extensions • 4x hydraulic outriggers • Heating • TÜV valid until: 01/2026 • Perm. gross weight: 7,490 kg • German vehicle • German documents • Immediately operational • This offer is non-binding and subject to change. Itsdpfx Asxuu H Eedwjb - Subject to prior sale, - Errors and/or typographical mistakes excepted.

Condition: used, Year of construction: 2016, operating hours: 302 h, Genie 3246 Scissor Lift, 11.9 m * Working height: 11.9 m * Platform height: 9.9 m * Basket capacity: 317 kg * Weight: 2,793 kg * Drive: 24-volt electric motor with integrated charger * 302 operating hours as per hour meter Iedoxfnhdspfx Adwotb * 2 drive speeds * Dimensions (LxWxH): 2,450 x 1,180 x 2,390 mm (1,750 mm without guardrails) * Foldable guardrails * Non-marking tires * Tread depth: 0-3 mm * Tire size: 15x5 * Wheel configuration: 4x2 * Wheelbase: 1,850 mm * Basket: steel construction * Basket dimensions (LxWxH): 2,140 (+900) x 970 x 1,100 mm * Platform extendable by 900 mm * Basket and ground controls * Safety inspection (UVV) valid until 12/2026 ----This description does not constitute a binding offer and may contain errors. No guarantee is given for the accuracy of all information. Please also visit our homepage.

Condition: ready for operation (used), Year of construction: 1998, This WILD door leaf press line was manufactured in 1998. It is designed for door production, handling dimensions from 1,800 to 2,300 mm in length, 500 to 1,300 mm in width, and thicknesses of 35, 40, and 44 mm. The line includes areas for gluing, pressing, and handling door panels with advanced feeding and transfer systems. If you are looking to get high-quality door production capabilities consider the WILD door leaf press line we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Dimensions for door production: lengths: 1800 - 2300 mm • Dimensions for door production: widths: 500 - 1300 mm • Dimensions for door production: thicknesses: 35 / 40 / 44 mm Extra Information Consisting of the following areas: Endless door panel gluing with frame laying station Press line with hard fiberboard loading station First area consists of: Portal feeding Angle transfer with rip and cross cut saw Feeding and supply of longitudinal and cross frame parts from magazines Longitudinal cross-cut station for the longitudinal frame parts Connecting station for the frame parts with the door leaf core, equipped with clamping devices Conveyor belt angle transfer with shuttle transfer of the door leaf cores to the glued hardboard panels Second area consists of: Feeding of the hardboard panels Brush cleaning machine Hardener application machine from below Glue application machine from below Disk roller conveyor Angle transfer for the lower hard fiber board Vacuum turning device for the upper hard fiberboard Automatic loading station for hardboard panels and door leaf cores Two door presses with two x four pressing stations each, set up parallel to each other Both presses are loaded at the infeed with one shuttle loading basket Both presses are unloaded at the outfeed with one shuttle unloading basket Angular transfer to the infeed into a hedgehog buffer Angular transfer at the outlet of the hedgehog buffer and feeding for stacking One-sided vacuum destacking with protective plate placement Note: The technical data and descriptions are transcribed from the original order confirmation. The information is for reference only and is not legally binding. Isdpfx Ajyaqmgsdwotb

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, year of last overhaul: 2025, total height: 1,150 mm, total length: 1,650 mm, total width: 900 mm, type of input current: three-phase, overall weight: 195 kg, input current: 16 A, control voltage: 220 V, Fat Frying Unit Riehle Wendomat 36 Riehle Model: Wendomat 36 1 turning basket for up to 36 pieces 1 proofing trolley Frying station in stainless steel design Connection 400V, 16A-CEE plug Used machine, cleaned with warranty + spare parts service Isdpoyagngofx Adwetb Quality from a specialist company! Benefit from over 35 years of experience! Options: Maintenance contract Delivery service Additional aluminium tilting containers Service package Instruction & commissioning Visit our large bakery machinery exhibition!

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 10/2019, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1340cm/246cm/265cm Itodpfox N Twnjx Adwsb Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets

Condition: good (used), functionality: fully functional, input voltage: 400 V, year of last overhaul: 2024, total height: 1,135 mm, total length: 825 mm, total width: 1,025 mm, type of input current: three-phase, overall weight: 258 kg, Fat Fryer esback 480 Itodpfx Adjyaf Ifjwob Reversible basket for up to 48 pieces Manual lifting and removal mechanism Temperature controller Steam lid, drip tray on the left Stainless steel design, mobile Connection: 400V, 32A-CEE plug Dimensions: 1025/2025 x 825 x 1135 mm (W x D x H) Used machine We have more fat fryers in stock!

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 11/2020, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2020, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Isdpfxjx N Ntle Adwetb Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels Spare wheel (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets TrailerConnect S.KO COOL country package wave 3

Condition: excellent (used), color: red, lifting height: 33,000 mm, Year of construction: 2021, operating hours: 1,146 h, General information Field of application: Construction Drivetrain Drive: Wheel Weights Empty weight: 3.475 kg Functional Lifting capacity: 1.500 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Ijdpfx Aexfrh Iodwstb Transport dimensions (LxWxH): 9,2x2,27x2,63 Production country: DE Additional information Please contact Vink Machinery for more information Klaas K23/33 TSR * 2021 * Diesel drive * 1146 working hours * 33-meter hook height * 23-meter horizontal reach * Remote control * Equipped with 2 work lights * 1500 kg lifting capacity * Wheel drive * Prepared for a man basket * Includes documents

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 07/2019, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Ijdpfx Adsyamugowotb Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1340cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets

Condition: used, Year of construction: 2025, Special Price - Showroom Machine Garbsen Our Machine Concept WL 6 The Weima High-Performance - Shredders with their flexible application possibilities can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) into fuel chips, achieving enormous volume reduction of material for bulky items. Functionality: The machine is equipped with a large feed hopper and can be fed with a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees continuous and cost-effective material feeding without the need for manual assistance. The hydraulically controlled pusher supplies the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependently controlled. The internal pusher guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended in a cardanic way to avoid lateral forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concavely ground, aggressive, and 4-times reversible knives / cutting crowns are located in milled knife pockets on special knife holders; this patented system guarantees high throughput performance, low energy consumption, and optimum discharge of shredded material by reducing the cutting gap between counter knife and rotor for the first time. The screen located under the rotor determines chip size (10 - 100 mm ). A hydraulically opening screen basket is available upon request. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft. Precise cut at high throughput with profiled V-rotor The specially developed by WEIMA V-rotor can be used universally and is made from solid material. Its aggressive material intake with up to two rows of knives guarantees high throughput with low power requirements. It can be equipped with hardened steel cutting knives with edge lengths of 30 mm and 40 mm. These can be turned several times in case of wear, which drastically reduces maintenance costs. Intuitive operation via Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. We use only high-quality components – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the pusher stroke or stop ensure high throughput. The built-in overload protection also prevents defects on the machine. Technical Specification WL 6Feed opening 800 x 1,250 mmHopper capacity 0.9 m³Rotor length 800 mmRotor diameter 256 mmDrive power 22 kWRotor speed 90 rpmMax. number of knives 42 piecesKnife type and size concave / 40 x 40 mm, cutting crownsScreen perforation 10-60 mmPaint finish WEIMA Standard RAL 2022 / 7016Connection value 400 V +/- 5% / 50 HzWeight approx. 1,600 kgIncluding: - Control cabinet* (Rittal) incl. electrical control (Moeller/Siemens) and S Isdpfx Asx Twdmodwstb

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 35 h, functionality: fully functional, total width: 87 mm, total length: 120 mm, maximum load weight: 200 kg, heating capacity: 7.2 kW (9.79 HP), tank capacity: 400 l, warranty duration: 24 months, type of input current: three-phase, inner dimension height: 600 mm, inner dimension length: 800 mm, inner dimension width: 500 mm, overall weight: 150 kg, input voltage: 400 V, input frequency: 50 Hz, workpiece weight (max.): 200 kg, LCT NW 180 BSS demonstration tank Dual frequency 27/80 kHz Ventilated stainless steel control cabinet Itedpfxsq Rd R Dj Adwob Hinged lid Tank completely insulated Stainless steel washing cork with four crane eyes and a basket bar for lifting Four adjustable feet for uneven floors Floor emptying via ball with inclined tray base for complete emptying Floor grating Bottom and 2 x side sound with a total output of 3000 watts Timer with timer and program control Connected load 10.2 KW