Used Beam Packs for sale (7,642)

Condition: used, Technical details: throat min.: 2600 mm throat max.: 4200 mm Support arm position: 360 schwenkbar / swiveable ° weight of the machine ca.: ca. 1,5 t Welding stand for positioning of a welding torch / welding source on big work pieces - diameter of frame = 1480mm - all adjustments have to be proceeded manually On sale without welding source. i.D. Njdpfou Nlqfjx Aa Dewb *

Condition: used, Technical details: Njdpfxsu Nu E Sj Aa Djwb table height: 800 mm table rotating: 360 ° table: 800 mm height over floor: 940 mm temperature: max. 450 °C electrics - voltage/frequency: 220/50 V/Hz total power requirement: 1,1 kW space requirements of the machine approx.: T:0,8xB:1,0xH:1,6 m With this machine can be packed parts respectively shrink-wrapped. There is a table with 4 stations on the machine. Can be purchased together with vaccum welding machine. i.D. *

Condition: used, Year of construction: 1992, Technical details: Nwedpfeu Nvgdsx Aa Dob lifting capacity : 2,0 t lifting height max. hook position: 2,3 m travel of hook: max. 3000 mm wheel base: 520 mm total power requirement: 2,3 kW Crane with carrier and electric rails: -double - T - beam 200 x 200mm, length approx. 10.100mm, travel 9.000,00 mm -Steel lifting gear, load capacity 2000kg, lifting class DIN 15018, lifting speed 0.80 / 5 m/min, lifting height 3 m, travel speed 10 / 2.5 m/min, track 200mm, axle distance 520mm, Chain hoist, hook -Pendant control panel Pendant station -div. mounting holes *

Condition: used, Technical details: throat min.: 2600 mm throat max.: 4200 mm Support arm position: 360 schwenkbar ° weight of the machine ca.: ca. 1,75 t dimensions L x W x H: L:5,0xB:1,6xH:2,8 m space requirements of the machine approx.: 6,61x1,4x2,8 m WELDING STATIVE for positioning a welding torch/welding source on large wide workpieces. - The device for adjusting the gas cylinder is integrated in the frame. - Dm of the base frame = 1480mm - All adjustments are made manually. - With welding device Make: KOLBE; Type: SC 400 - 400A; protection P21; cooling E; input 380V/21kVA; welding 400V / 34V; water cooled; - Welding steps: 3x coarse and 12x fine - feeding device (removable) with 13,5m cable to the welding device Nwjdpfxeu Nwyro Aa Dob - Hose package water cooled (4,0Meter) *

Condition: used, Hydraulic power unit, hydro power unit with double pump, tandem pump, hydraulic unit Manufacturer likely Italian Type: PF1/1-2.8/2.8 Year of manufacture: approx. 2000 Nwodpexrgt Sefx Aa Djb Operating pressure: 50 bar, max. 100 bar Flow rate: 2 x 4 liters/min. (2 pumps) Tank capacity: approx. 25 liters Motor power: 1.5 kW Power supply: 220 volts, 50 Hz - Double pump, tandem hydraulic pump, type PF1/1-2.8/2.8 131DBV601 - 1 return filter - 2 pressure gauges - Tank dimensions (L/W/H): 320 x 300 x 290 mm - Pressure port connections at the hydraulic pump outlet: 10L Installation space required (L x W x H): 600 x 400 x 600 mm Net weight: approx. 70 kg Very good condition

Condition: used, Year of construction: 1997, Beam planer 260 x 160 mm, trailing chamfering unit on upper spindle, air cushion table with dual-axis control for left and upper spindle, brand new control system (latest Weinig version) Max. working width: 260 mm Max. working height: 160 mm Number of spindles: 6 units 1st spindle: bottom, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 2nd spindle: right, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm, motor power 11.0 kW (shared motor with left spindle) 3rd spindle: left, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm 4th spindle: top, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 5th spindle: bottom, spindle diameter 40 mm, motor power 11.0 kW, speed 6000 rpm, clamping length 270 mm 6th spindle: top, chamfering unit Motor brakes: mechanical Electric height adjustment for upper spindle Optional with/without feed system Feed brake system: Yes Feed speed stepless up to: 3 - 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubricant pump: manual Max. jointing allowance: 10 mm Jointing rebate cutter on jointer: Yes Powered rollers in table: 1 unit Control system: PLC control Nedpfxswwwkho Aa Dowb Spindle readout: mechanical digital display Infeed rollers before jointer: Yes Air cushion table: three-strip Central lubrication point: Yes Description: short infeed table 1050 mm with internal lighting Location: Nattheim

Condition: used, Year of construction: 2021, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 202104, Machine TypeTP-G001 Manufacturing Number 202104 Production Year 2021 Type of Packed Materials Free Flowing Products in PE coated paper sachets (sticks) Type of Drive pneumatic/electric Execution steel/stainless steel Nwedpfsx A Dqpox Aa Dob Degree of protection IP41 Air Demand 33 m3/h Supply Voltage 400V 50Hz 3~ + N +PE Power Consumption 8 kW Working Pressure 0,8 MPa Weight of Machine 730 kg Control System PLC Input System 7” touchscreen / physical buttons Packaging Speed up to 45 sticks / min. / 1 lane Minimal/ Maximal Dose 1 g/10g Standard Filling Weight Range sugar 3-7 g Stick Width 17 mm Stick Length 110 mm (max.165 mm) Packaging Roll Width 400 mm (max. 560 mm)

Condition: used, Year of construction: 1997, functionality: fully functional, Production line for packing, blending, filtering and homogenizing of dry products from 2 manufacturers - D.H.T. van den Dikkenberg and BTH (Premier Tech). All dairy powder and powders of plant origin can be used, such as milk powder (SMP/WMP), whey powder, buttermilk powder, powder of milk permeate, lactose, dextrose, whey protein/fat concentrates, FFMP, soy protein, pea flour etc. The number of blended ingredients is unlimited. The line is suitable for both - food and feed - purposes and has a producing capacity of 3mt per hour. The line for the production & packing of dry blends: - meets the requirements for materials in contact with food products; - is made of durable materials that don't change the smell and taste of food products, don't absorb moisture, are corrosion-resistant and safe to use; - all surfaces are resistant to repeated exposure to cleaning/disinfecting agents; - is designed and manufactured in such a way that there are no cavities inside in which the processed products accumulate, and this wouldn't create conditions for contamination of the manufactured products; - is mounted in two 40 foot containers, which ensures easy transportation of equipment. Nwedpfxowhf Dds Aa Dsb The production line has the following units: 1) two-stage filtering of the poured raw materials through coarse and fine sifting sieves First, the raw materials are sifted through a sieve with eyes of 5 mm in diameter. At this stage, foreign impurities and hardened particles over 5 mm are separated. After that, the raw materials are sifted through a second sieve with eyes of 0,2 mm. In this way, all foreign particles over 0,2 mm are completely separated from the raw materials. 2) mixing of components into a homogeneous blends The mixing process in a horizontally located mixer is very gentle. The blended ingredients remain undamaged and retain their structure, which is very important for the products of instant category. 3) dosing of finished products into bags The line is equipped with a dispenser, which is technologically connected to automatic scales. It allows to select and set the desired volume of the packed product. Standard packaging options are bags of 20-25 kg net. 4) suction of excess air An integrated vacuum unit helps to suck out of the filled bags an excess air. The product becomes denser, less airy, and when stacking the bags on the pallets, the entire structure becomes more stable. This is very important for the safety of the cargo during transportation. 5) heat-sealing of the inner poly liner The line is equipped with a heat-sealing unit (BTH BV), which is used to seal the inner poly liner. Sealing the liner ensures its tightness, which helps to prevent the moisture penetration into the finished product. Since the powder is very hygroscopic product, its reliable protection from moisture is very important for preserving the quality of the manufactured products. 6) sewing of paper bags with/without crepe paper The line also has an integrated sewing unit (Fischbein SA) for closing of the paper bags (type - open mouth). For more reliable tightness of the packaging, a crepe paper tape in the same colour as the bag may be used additionally. The line is equipped with 3 bunkers with a capacity of 1mt each: 1) raw material blending bunker 2) product settling bunker after blending 3) finished product bunker The line has a high production efficiency and very easy maintaining and operation.

Condition: used, Fensterpresse Orma Max. 4000x2700mm Nwodjx Svw Nepfx Aa Djb 380V, 2,2kW - Documentation available: No - CE certificate present: No - Max. workpiece width [mm]: 4000 - Max. workpiece height [mm]: 2700 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2010, condition: used, Shear beam load cell -Nominal load: 500 kg Nsdpfx Asdkpa Sea Dowb -Nominal value tolerance: %+/- 0.1 -Stainless steel: 1.4548 -Protection class: IP 68 -calibratable -Dimensions: 32/32/130 mm -Net weight: 0.98 kg

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -for: Harbs K2V folding machine -Max. Pressure: 70 bar -Motor: 0.75 kW 1400 rpm Nwsdpfjdwc I Ijx Aa Dsb -Dimensions: 650/460/H600 mm -Weight: 60 kg

Condition: used, Precision bending beam for glass cutting table, glass cutting table, glass cutting machine -Manufacturer: INNOLAS S100-5N -Type: NJ Y123/101 -Weight: 0.1 kg Nedeb Nkt Espfx Aa Djwb

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 110 bar -Liter output: 0.25 l/min -Motor: 24 V 22 W. -Hydraulic tank -Dimensions: 195/280/H160 mm -Weight: 17 kg Nwodpfed N D A Uex Aa Dob

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 160-254 mm Nedpod Ergmofx Aa Dewb -Load capacity: 4000 kg -Number: 1x terminals available -Price: per piece -Weight: 11 kg

Condition: used, Power supply, control card, input card, control, edge banding machine, edge banding machine Nsdpfx Ajcccxqja Dewb -Manufacturer: BICC vero -Type: Monovolt PK 60 136-44585 -Number: 2x control cards available -Price: per piece -Dimensions: 40/170/H265 mm -Weight: 0.95 kg

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper Nwodpfxjd Hb Icj Aa Dsb -Span width: max. 450 mm -Load capacity: 1,000 kg -Number: 2x available -Price: per piece -Weight: 8 kg

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 30 mm -Load capacity: 2500 kg Nedpfjdi Slcsx Aa Dswb -Number: 1x terminals available -Price: per piece -Weight: 15 kg

Condition: used, Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: ELCO -Type: HMC-1B 5V10A Nwedpfjcpnl Nex Aa Djb -Number: 1x control cards available -Price: per piece -Dimensions: 250/135/H60 mm -Weight: 1.3 kg

Year of construction: 1986, condition: used, Beam claw, sheet metal clamp, sheet metal claw, girder clamp, sheet metal gripper, material gripper, material gripper, section steel gripper, panel gripper, lifting claw, lifting clamp, support clamp, crane clamp -Beam clamp: lifting claw type 1160 -Clamping area: see photos -Load capacity: kg -Dimensions: 160/140 / H410 mm Nwsdshgkgzspfx Aa Djb -Weight: 13 kg

Year of construction: 1979, condition: good (used), Adjustable traverse, crane traverse, hall crane, workstation crane, crane hook traverse, load traverse, balancing traverse -Manufacturer: JJSietas, crane traverse balancing traverse, for the transport of various loads -Load capacity: 15 t (6x 2.5t) -Load hooks: 6 pieces with sheet metal claws clamping range 0 - 25 mm, see photos Nwodpfx Aajlbdl Ee Deb -Dimensions: see photo sketch -Dimensions: 8520/240/H620 mm -Own weight: 1200 kg

Condition: good (used), Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper Nwjdpfjd N Rt Rox Aa Djb -Span width: 80 - 350 mm -Load capacity: 5000 kg -Dimensions: 410/210/H400 mm -Weight: 15.5 kg

Condition: good (used), Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: BICC vero -Type: PK 50 monovolt Nwjdpfx Aasccbnpe Dsb -Number: 1x control cards available -Price: per piece -Dimensions: 40/210/H130 mm -Weight: 0.8 kg

Condition: used, Power converter, power supply, power pack, switching power pack -Manufacturer: Siemens, SITOP Power 40 power supply -Type: 6EP1437-3BA00 -Input: 3AC 400-500V/max.2.6A 50/60Hz -Output: 24VDC/40A/960W Nwedpfomch Umex Aa Dsb -Dimensions: 130/240/H120 mm -Weight: 3.4 kg

Condition: used, Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, Nedpfonah A Aox Aa Dswb -Manufacturer: MGV, power pack power supply -Type: PH1003-2840 -Input: 3 x 320...460V AC -Output: 27.3 VDC /40 A -Number: 2x power supply available -Price per piece -Dimension: 265/160/H125 mm -Weight: 2.5 kg/pc.

Year of construction: 2002, condition: good (used), beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp, support clamp, crane clamp -Manufacturer: Greifzug, Corso beam clamp type LT-3B -Flange width: 80 - 320 mm -Load capacity: 3 t Nwsdevgu Nbopfx Aa Dob -Dimensions: 380/115/H375 mm -Weight: 11 kg