Used Beam Packs for sale (7,631)

Condition: good (used), knife set for press brake width of the lower beam and the upper knife are 2550mm. for dimensions and specifications see photos Kjlhowlcmdocdwxslt

Condition: used, Length: 7,5 m Electric motor: 1,1 kW each rail Kljlhcdwomrzthexot Chain conveyor for board packs - Length: 7,5 m, - Electric motor: 1,1 kW (each rail).

Condition: excellent (used), 4 x multi block of 835mm long 4 x upper die of 835mm long the dies are in good condition for specifications and dimensions see photos Kljlhcdwowlcixjxst

Condition: used, Year of construction: 2022, Workpiece width max: 455 mm Workpiece thickness max: 200 mm Workpiece length max: 13.300 mm Crosscut height: 200 mm Positioning cart: 2 4-side milling aggregate: Yes 5-axes technology: Yes HOMAG Flex 5 interface: Yes HOMAG FLEX 25: Yes Tool changer positions: 12 Birds mouth cutting unit: Yes Shark cutter: Yes Scribing: Yes Saw for shifter cuts: Yes Klsljwl Ii Dohcdwxst Chamfer milling: Yes Labelling: Yes Workpiece feed: Log carriage Chip conveyor: Yes Control: Homag powerTouch Conformity marking: CE mark Space requirement Width: 4,1 m Space requirement Height: 2,9 m

Condition: used, machine/vehicle number: 005108, Position 1: Front-Loading Panel Saws HOLZMA-HPP 380/43/43 + TLF Kjlhcdoui U Ilowxelt Position 2: Horizontal Storage Systems HOLZMA-HPP 380/43/43 + TLF

Condition: as good as new (ex-display), Year of construction: 2025, travel distance X-axis: 1,300 mm, travel distance Y-axis: 6,300 mm, travel distance Z-axis: 300 mm, Technical data: Control system: multi-axis real-time interpolator, with active trajectory prediction, LAN communication, EtherCat, sampling time below 2ms, correction map, RTCP tool end tracking, remote service access Working area: 1300×6300 mm Z axis clearance: 300 mm Drive system: servo drives with EtherCat protocol, X, Y helical strips, hardened, ground in accuracy class 6, Z axis ball screw in accuracy class 6, planetary gears with angular backlash below 1’ Linear bearing: linear guides with preload Travel speed: up to 30 m/min Program resolution: up to 0.0001 mm Positioning accuracy: 0.01 mm Electric spindles: 15 kW inverter-powered, liquid-cooled Tool cone: HSKF63 Maximum spindle speed: up to 24,000 rpm Kslsn Nv Rcshcdwxjlt Construction: welded, ribbed, stress-relieved steel, precisely machined from one mount Table type: beam Equipment options: - Schmalz double-circuit beam system - Schmalz pneumatic and mechanical clamping clamps - positioning bases - possibility of two-zone operation - preparation for chip extraction - chip conveyor - revolver tool magazine and 2 linear magazines (26 tools) - drilling unit 12 vertical tools, 4 horizontal tools, 2x saw - functions: correction map and intelligent energy recovery - advanced safety system - possibility of cooperation with CAD/CAM software for programming - furniture, fronts, stairs, windows, doors and many other details - automatic central lubrication - air conditioning of the control cabinet - remote service access, remote diagnostics - tool diameter and length measurement probe with diameter compensation - via the control system - light laser for positioning workpieces - machine in the Industry 4.0 concept - tool life option #plotter #CNC #milling machine #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Pywood #plytawiorowa #Chipboard #steel #aluminium #aluminum #BLUM

Condition: ready for operation (used), Technical characteristics Power and Motors Kslhcdwsttdm Ioxolt Voltage: 380 V Pluging: Three-phased Power: 2,2 Kw Overall dimensions

Condition: good (used), Frame: 5800*1050 mm 6590*1050 mm Traverses 2700*80 INP mm 2400 kg/compartment 2700*100 CE mm 2400 kg/compartment If you require shelves or accessories in other configurations or designs, please contact us. Shipping: Please inquire about shipping costs, stating your zip code and city, Klolhcodlnk Todwxst as well as the desired quantity of items.

Year of construction: 2008, Condition: used, Used machine Year of manufacture: 2008 Kelhcdewkbdxjwxolt Condition: Currently still in production Equipment and technical specifications: Cutting length: 3,300 mm Cutting width: 3,350 mm Saw blade projection: 125 mm Saw carriage feed rate: 1-170 m/min. Main saw blade: 450 mm, 7.5 kW Scoring unit: 215 mm, 2.2 kW Slider feed rate: 1-90 m/min. Including 3 air cushion tables Location: North Rhine-Westphalia Availability: Approx. end of August 2025

Condition: new, 2000 Cool Boxes Including Cooling Batteries Cool Boxes 53x35x40cm Including Divider & 6 Cooling Batteries (White) 20 units per pallet Negotiable price: €20 net ex warehouse per unit Items are in stock. Transport and assembly available upon request. Inspections possible at any time by appointment. Further information upon request. Klslhourvl Docdwxjt We always have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical specifications, information, and prices, as well as prior sale! See our Terms and Conditions; all prices exclude VAT, ex warehouse.)

Condition: used, machine/vehicle number: 007486, Max. panel width: 2100 mm Max. panel length: 4300 mm Klslhjt Sn Azscdwxet Main saw blade projection: 135 mm

Condition: good (used), Year of construction: 2000, Functionality: fully functional, total width: 4,000 mm, total length: 5,000 mm, total height: 3,000 mm, overall weight: 7,500 kg, working width: 2,000 mm, punching pressure: 50 t, Working width: 2000 mm Punching head: 650 x 650 mm Punching head has mechanically adjustable low-point stops and can be rotated (with a digital counter for the punching depth to simplify adjustment) Punching pressure: 50 t Punching belt with automatic clamping jaw feed including oscillating belt Machine features a CNC control system Unwinders are not included Punching machine runs smoothly and is still ready for use Klolhcowlu N Dsdwxot

Condition: used, mileage: 5,423 km, power: 265 kW (360.30 HP), first registration: 04/2024, overall weight: 18,000 kg, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 05/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Steering arrangement RIGHT, with Rotorcleaner ASR, BrakeMatic, unison horn, ESS, EBA2, BT FSE, RIO Box, MAN Tronic, Radio MAN Media Truck 7-color display and navigation, LGS IV, Twin Engine 1-0905, 9m³ container, dirt chute 350mm, feed brush, sweeping unit with integrated drive roller, LED work lights, coarse dirt collection, flap valve via inlet pipe, suction option at the rear with 340 liters, additional water tank 1500 liters, Rotorvlean, total water volume 3820 liters, adjustable speed for feed brush, dual sweeping unit, suction mouth 600mm, sweeping unit sideways shiftable 400mm, high pressure system 280 bar at 74 L water per minute, high pressure system behind suction mouth and feed brush, front disc brush, hand suction hose Kslhcdweurd Nksxelt

Condition: used, Trumpf Type: TruDisk 4002 / W20.HL29 Trumpf TruDisk 4002 laser beam source with KLH cooler The Trumpf TruDisk 4002 laser beam source is an industrial disk laser source (disk laser) from TRUMPF, characterized by high power, beam quality, and efficiency. It is frequently used for welding, cutting, and other material processing applications. Maintenance has been performed regularly. Unit consisting of a beam source with associated cooler, but without optics and fiber optic cable. Technical Specifications Laser power: 4,000 watts (4 kW) (minimum 80 W) Wavelength: ~1030 nm (infrared range) (Yb:YAG) Beam quality (BPP): typically ≤ 8 mm mrad Fiber connection: TruDisk lasers usually have multiple fiber connections Cooling: Water-cooled – via a KLH cooler Dimensions: 1.0 x 2.0 x H1.6 m (laser) + 1.0 x 1.5 x 1.8 m (cooler) 380 V -10% ... 460 V +10%, 3AC + PE 23 kW / 25 kV A - 34 A / 400 V 50 ... 60 Hz Kjlewh Rnzehcdwxslt KLH cooler: The KLH cooler is an industrial liquid cooler that ensures heat dissipation from high-performance laser systems such as the TruDisk 4002. Typical Features: Water-to-water cooling Precise temperature control (typically 20–25°C) Refrigerant: R 404A Can be controlled via TRUMPF interface Required to comply with laser specifications Device Type W20.HL29 Weight: 850 kg (laser) + estimated 550 kg (cooler) Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions over the phone.

Year of construction: 1998, Condition: used, Used machine Year of manufacture: 1998 Condition: Currently still in production Equipment and technical specifications: Lifting table machine Cutting length: 4230 mm Cutting width: 4100 mm Machine weight: Approx. 7,800 kg Kljlhcdewi Aglswxet Feed speed: Forward 25 m/min, reverse 64 m/min Saw feed speed: 1-100 m/min Saw motor: up to 19 kW at 2930 rpm 50 Hz Scoring motor: 1.5 kW at 2830 rpm Clamp opening: 130 mm Sold on behalf of a customer. Therefore, technical specifications are subject to change without notice! Location: North Rhine-Westphalia Availability: Week 28, 2025

Condition: used, Year of construction: 2019, Sliding table saw with movable and adjustable saw unit class px 350i Technical specifications CLASS PX 350I - max. saw carriage travel [mm] 2600 3200 3800 - saw blade tilting 0 ÷ 46° - max. saw blade diameter (cutting) [mm] 50 - max. saw blade diameter (milling + cutting) [mm] 300 - max. cutting height (D350) from the table at 90°/45° [mm] 105/72 - max. cutting height (D300) from the table at 90°/45° [mm] 80/50 - saw blade speed [rpm] 4000 - cutting width rear stop [mm] 1300 Other technical specifications: - three-phase motor 5.5kW 50Hz - extractor hood diameter [mm] 120 (1) – 100 (1) - dimensions [mm] L 3859 W 3196 H 1368 L 4459 W 3196 H 1368 L 5059 W 3196 H 1368 STANDARD EQUIPMENT - Saw unit with grooving function, height adjustment via sliding shoe guide and tilt adjustment via lateral, high-strength rounded guides - Max. saw unit speed 40 m/min - Panel length detection system for optimizing the cutting cycle - Grooving depth adjustment system with numerical display - Control on adjustable control panel with "READY" Electronic control: 2-axis control with: * Motorized tilt adjustment of the saw unit * Rear stop position adjustment (reading of the stop position via magnetic tape) * Manual, semi-automatic and automatic mode with 99 storable work programs * Additional functions: calculator and operating hour meter * 3rd axis (height adjustment of the saw unit) optional - Extendable telescopic edge stop up to 2500 mm, which can be It is installed on a wide fixed table for panel support (600 mm x 1350 mm from the cutting line) complete with:* 2 stops and scale facing the operator* Extendable roller for workpiece support, 1900 mm total length.- Motorized and programmed rear guide positionable from 0 to 1300 mm- 2 fixed tables + 1 movable table- Additional emergency stop and work cycle start button positioned on the movable table. Advantageous when machining large workpieces that would otherwise obstruct easy and safe access to the machine's main control panel. class px 350i CE version - 3200 1 pc. Sliding table saw with movable and adjustable saw blade in compliance with European safety regulations - Saw carriage travel 3200 mm Design in accordance with safety regulations 1 pc. Volt 400 EU 1 pc. Extendable telescopic edger stop up to 3200 mm with digital readout, which is installed on a wide fixed table 1 pc. Extendable telescopic edger stop up to 3200 mm with digital readout, which is installed on a wide fixed table for panel support (600 mm x 1350 mm from the cutting line) complete with - 2 stops with independent electronic digital readout with magnetic strip detection system and LCD display - extendable roller for the workpiece support, 1900 mm total length Miter device with compensation and digital readout of the stop position 1 pc. Complete with: - Telescopic stop with stop flaps for cutting dimensions up to 1500 mm - Table for quick angle adjustment - 1 digital readout Parallel cut device with digital readout 1 Complete with: - 1 stop for cutting dimensions up to 1000 mm - 1 digital display - Larger rear table with double motorized stop - Stop adjustment from 0 to 1300 mm - Support table length 2000 mm - Three-phase motor 7 kW 50 Hz (7 kW 60 Hz) - 1 piece - Pallet 1 piece Storage location: Garbsen Klslhcdsvztivewxot

Condition: used, machine/vehicle number: 007622, Max. panel width: 2200 mm Klolhcsu Axxcedwxst Max. panel length: 5800 mm No of Rip saw Grippers: 8 Second flexible pusher: yes Panel Rotation Station: yes Thin sheet loading: yes Vacuum sheet loading: yes

Year of construction: 1975, Condition: used, lifting capacity 5 to. fine hub ja weight of the machine ca. 3,4 t Kolhcdwowhq Alsxolt

Condition: excellent (used), Functionality: fully functional, mileage: 2,18,413 km, fuel type: diesel, color: red, maximum load weight: 3,645 kg, Year of construction: 2005, operating hours: 2,400 h, Equipment: ABS, central locking, immobilizer system, parking heater, We are pleased to present a Scania street sweeper with a Jonhston Beam VX800 body. The car has undergone a thorough service and refreshment. Kljlhcdev R Encewxjt The engine and gearbox work EXCELLENTLY. It was constantly serviced in the workshop of the company that has used it from the beginning. The sweeper is equipped with a front and rear watering can + an extra nozzle for salt or similar. It has a brush under the vehicle and an arm extending from the right side. Additionally, it has a powerful vacuum cleaner. All documents for registration on our side, including: Technical inspection (as a SPECIAL vehicle) and vehicle documents. We accept various forms of payment such as the above or classic cash. Additionally, we deal with insurance. We are also able to deliver this truck to your door. Dimensions and weights: GVW: 18000 kg (designed 20000 kg) Current weight: 14355 kg Payload: 3645 kg Dimensions: Length: 675 cm Width: 250 cm Height: 310 cm Wheelbase: 395 cm Equipment: JOHNSTON VX800 bodywork (one of the best on the secondary market) Cruise control Steering wheel on the right Automatic gearbox Bodiment control in the cabin Reversing camera 2 Seats Suspended bed On-board computer Retarder (engine brake) Electric windows and mirrors Heated driver's seat Orange lighting on the roof Additional external lighting Fog lights Report from inspection: The truck came from Denmark on wheels WITHOUT any problems. The Scania was checked by us and is in very good technical condition. It has low original mileage. Of course, the vehicle is accident-free! It is currently on winter wheels in the size: 315/80-22.5 tread condition approx. 70%. Attention! The price given is in the net value and is valid for Export and for companies. A large discount is possible for individual customers - We invite you to contact us directly by phone, so that you can get your best price :) After price negotiations, we are able to record a video or perform a computer test or paint meter test in detail for a determined customer, so that you can calmly buy the equipment remotely. — Of course, we encourage you to come for an inspection, but if it is not possible, this form of purchase will be available, which guarantees a safe form of transaction. Dear Customer: At the same time, be aware that long-term used equipment often has its own features or defects, all of which we are unable to repair. That is why we do not write in our advertisements such phrases as most sellers such as: "showroom condition" or "does not require any financial contribution", because it is simply not true, and new cars are in fact available in the showroom at a price that is often several times more expensive. We provide professional, free advice and are characterized by an individual approach to the Client. We will always give you reliable advice even if you are in arrears with repayments or are in the Bik and Krd databases. -We have attractive credit or leasing conditions. Detailed information about financing will be provided by our representative Mr. Tomasz at tel.: 667910542 THIS ANNOUNCEMENT IS FOR INFORMATIONAL PURPOSES ONLY AND DOES NOT CONSTITUTE AN OFFER IN ACCORDANCE WITH ART. 66, § 1. OF THE CIVIL CODE. OUR COMPANY IS NOT RESPONSIBLE FOR MINOR ERRORS OR INCOMPLETE INFORMATION CONTAINED IN THE ANNOUNCEMENT OR OUT-OF-DATE ANNOUNCEMENT.

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 610 mm Maximum working width 610 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Kljlewfmyzehcdwxjt Latest generation IE-3 motors Spindle and feed brakes CE

Condition: used, machine/vehicle number: 005456, Max. panel width: 2200 mm Max. panel length: 4500 mm Main saw blade projection: 123 mm No of Rip saw Grippers: 8 No of Cross Cut Grippers: 5 Kslhceiqzgfsdwxjlt Second flexible pusher: yes Panel Rotation Station: yes

Condition: used, machine/vehicle number: 005445, Max. panel width: 3200 mm Max. panel length: 2120 mm Kolheiiiuyjcdwxslt Main saw blade projection: 165 mm No of Rip saw Grippers: 4 No of Cross Cut Grippers: 9 Panel Rotation Station: yes Thin sheet loading: yes

Condition: used, machine/vehicle number: 006602, Position 1: Front-Loading Panel Saws BARGSTEDT + HOLZMA-HPP 380/43/43 Position 2: Automated Warehouse BARGSTEDT + HOLZMA-HPP 380/43/43 Kelhcdortup Rowxolt

Condition: used, machine/vehicle number: 007829, Position 1: Front-Loading Panel Saws SCHELLING-FH 4 430/220-P Klelhcdwjwgkurjxjt Position 2: Automated Warehouse SCHELLING-FH 4 430/220-P

Condition: used, machine/vehicle number: 007827, Max. panel width: 2200 mm Kslhcswgku Eedwxelt Max. panel length: 4300 mm Main saw blade projection: 95 mm Vacuum sheet loading: yes