Used Bending Tube for sale (4,785)

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 34,797 h, machine/vehicle number: 2011-0250, pipe diameter (max.): 600 mm, pipe length (max.): 1,500 mm, bending angle (max.): 180 °, bending radius (max.): 200 mm, wall thickness: 3 mm, Original machine year: 1996. In 2011, fully overhauled by the manufacturer for approx. EUR 250,000: electrical and mechanical components extensively renewed. TECHNICAL DETAILS Tube diameter: 16 – 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 – 200 mm Tube feed length: 1,500 mm Bending angle: max. 180° + spring-back Tube length: 400 – 1,500 mm Tube outside diameter: 28 mm – 60 mm Material specifications Tensile strength stainless steel: max. 750 N/mm² Tensile strength mild steel: max. 450 N/mm² Capacity (steel): Ø 60 x 3 mm Capacity (stainless steel): Ø 57 x 2 mm Axes/Movements Bending direction: left Bending speed (forward): max. 22.0 rpm (infinitely variable) Bending speed (return): constant 22.0 rpm Rotational positioning: max. 360° Rotational speed: 50 rpm Multi-radius height adjustment: lowest tube center 55 mm Height travel: suitable for 3-groove bending tools MACHINE DETAILS Overrun time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Control console (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic oil volume: 340 l Control Bending planes: up to 6 (CNC programmable) Positioning device: NTB configuration Control unit: Schwarze-Robitec operation and control console FEATURES - Automatic cold tube bending machine - Tube positioning device - Gripper - Schwarze-Robitec tube magazine - Hydraulic operation for bending table, tool clamping, sliding rail, mandrel retraction, reinforced sliding rail feed and retraction - Various bending tools for Ø 60 mm tubes - Various accessories - Control cabinet cooling unit - Dual foot switch - Schwarze-Robitec control console - Rittal control cabinet cooling unit, type SK 3361100 Itsdpox Srkljfx Adwsb Note: Machine could only be tested in setup mode due to lack of operating know-how. No faults are known. The machine is currently disassembled.

Condition: ready for operation (used), total length: 5,500 mm, total width: 1,400 mm, total height: 1,000 mm, empty load weight: 600 kg, Buisbuigmachine voor buis: dia 6 48 mm voor volledig materiaal: max 30 mm met gereedschap voor buisdiameter 21,3 / 26,9 / 33,7 / 42,4 / 48,3 mm Max dia tube x thickness: Ø 6 > 48 mm (45 kg / mm²) Iodpfxsxcqi Eo Adwjtb Max bendingradius: 180°

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 500 h, control type: PLC-controlled, degree of automation: automatic, pipe length (max.): 3,000 mm, tube wall thickness (max.): 2 mm, Metalworking company sell megabender 030 In the equipment have mandrels for tube: 60,3mm x 2mm 50mm x 2mm 40mm x 2mm Itodev Di Dnjpfx Adweb 700 kg - Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic design (3000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle Stainless steel 2mm steel 3mm cooper and aluminium up to 4mm

Condition: ready for operation (used), empty load weight: 1,000 kg, cap: 50 x 2 x 2,5 mm Itodpfx Adjyac U Nswob length: 6000 mm

Condition: new, Year of construction: 2025, Electric pipe bending machine without mandrel. Accurate and efficient machine for bending steel, copper, aluminum and brass pipes. The possibility of selecting the optimal bending radius allows for obtaining high-quality results without deforming the material. The presented bending machine is very easy to use. Pipe benders are devices used in individual and small-series production of parts in the automotive, furniture, architecture or garden tool industries. The main bending die is driven by a reduction gear, an electric motor. The device can work in two modes: manual and semi-automatic. The simple and durable design ensures long-term, trouble-free use. Standard equipment digital reading of bending angle The BENDMASTER 40A machine is equipped with dies for pipes with a diameter of: 16; 20; 25; 32; 38 mm Technical data Itsdjvugx Dspfx Adweb MAXIMUM BENDING ANGLE 180° DIY ROTATIONAL SPEED WHEN BENDING 5 rpm MAIN MOTOR POWER 1.5 kW EXTERNAL DIMENSIONS OF THE DEVICE 720 x 500 x 1030 mm WEIGHT 330 kg For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, Electric bending machine for bending pipes and profiles, bars and flat bars depending on the rolls - bending stones used. The machine is additionally equipped with mechanical pressure on the upper roll with vernier. Ideal for bending curves, circles, spirals, etc. Complete with foot pedal for left/right drive control. Used in locksmith shops and on construction sites. Max pipe bending range up to 30 mm. The bending machine allows working both vertically and horizontally. Machine characteristics Electric bender for bending profiles and pipes. The bender allows working in both vertical and horizontal planes. The machine is equipped with mechanically adjustable pressure on the upper roll. Ideal for bending curves, circles, spirals. Bending radius adjustable by means of top pressure device with vernier scale. Application: Bending of profiles and tubes Different profiles can be bent by means of universal rollers Very high unladen weight for optimum stability Ground and hardened directional rollers on the sides, Bending rollers made of robust and hardened steel Operation via foot pedal Vertical and horizontal operation Left/right operation Standard equipment Side guide rollers foot pedal Driver's manual in Polish CE declaration Technical data Round tube [mm] 30 x 1 Rectangular profile [mm] 30 x 30 x 1 Round bar [mm] 16 Solid rectangular piece [mm] 30 x 10 Shaft diameter [mm] 30 Rotation [rpm] 9 Motor power [kW] 0.75 kW Power supply 3 phase, 400V Isdju Snlkopfx Adwjtb Dimensions (L x W x H) [mm] 1200 x 750 x 1210 Weight [kg] 252

Condition: new, Year of construction: 2025, Accurate and efficient industrial bending machine for bending steel, copper, aluminum and brass pipes. The ability to select the optimal bending radius allows for high-quality results without deforming the material. The presented bending machine is very easy to use. Pipe benders are devices used in individual and small-series production of parts in the automotive, furniture, architecture or garden tool industries. The main bending die is driven by a reduction gear, an electric motor. The device can work in two modes: manual and semi-automatic. The simple and durable design ensures long-term, trouble-free use and guarantees ease of use. Standard equipment digital reading of the bending angle The BENDMASTER machine is equipped with dies for pipes with a diameter of: 38.1; 48.3; 70 mm Technical data MAXIMUM DIAMETER OF BENT PIPE 70x5 mm MAXIMUM DIMENSION OF BENT SQUARE PROFILE 50x50x2 mm MAXIMUM BENDING ANGLE 270° DIE ROTATIONAL SPEED DURING BENDING 1.2 rpm DIE ROTATIONAL SPEED DURING RETURN 2.4 rpm MAIN MOTOR POWER 5 kW Itodpfx Adsvugv Aewob EXTERNAL DIMENSIONS OF THE DEVICE 1300x700x900 mm WEIGHT 680 kg For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, Electric bending machine for bending pipes and profiles, bars and flat bars depending on the rolls - bending stones used. The machine is additionally equipped with mechanical pressure on the upper roll with vernier. Ideal for bending curves, circles, spirals, etc. Very high empty weight for optimum stability during operation. Complete with foot pedal for left/right drive control. Used in locksmith shops and on construction sites. Max. pipe bending range up to 50 mm. The bending machine allows work in both vertical and horizontal planes. Machine characteristics Electric bender for bending profiles and pipes. The bender allows working in both vertical and horizontal planes. The machine is equipped with mechanically adjustable pressure on the upper roll. Ideal for bending curves, circles, spirals. Bending radius adjustable by means of top pressure device with vernier scale. Application: Bending of profiles and tubes Different profiles can be bent by means of universal rollers Very high unladen weight for optimum stability Ground and hardened directional rollers on the sides, Bending rollers made of robust and hardened steel Operation via foot pedal Vertical and horizontal operation Left/right operation Standard equipment Side guide rollers foot pedal various roller sets DTR in Polish CE declaration Itsdpfeu Snm Iex Adwjb Technical data Material: round tube [mm] 50 x 2 Material: rectangular profile [mm] 50 x 50 x 2 Material: round bar [mm] 35 Material: solid rectangular piece [mm] 35 x 35 Diameter of rollers [mm] 40 Motor power [kW] S1 1.5 / S6 2.2 Power supply 3 phase, 400V Dimensions (L x W x H) [mm] 900 x 850 x 1700 Weight [kg] 485

Condition: used, Year of construction: 2001, Technical details: tube diameter: 74 mm wall strength: 5 mm tube diameter min.: 10 mm tube diameter max.: 74 mm round material: Stahl max: 40 mm control: Trumpf-Rohrtechnik IsoBend 2.0 bending radius max.: max: 300 / min: 65 mm bending angle max.: max: 195 / min: 0,1 ° bending speed: (°/s): 90 / (°/s²): 190 °/s tube pipe draw up length: 3000 mm work pressure of hydraulic: Betriebsdruck max: 300 bar total power requirement: 43 kVA weight of the machine ca.: 8,5 t Itodpfx Adju Ibvhswsb dimension machine xH: 6,5 x 1,6 x 1,6 m dimension control panel: 0,8 x 0,6 x 1,4 m It is a multi radius bending machine with bending head and swivel arm. (Cold bending machine) Possible applications: only for processing pipes, round steels and wires made of steel, stainless steel and non-ferrous metals. Due to the cross slide of the bending head, the following advantages can be listed: -free programmable X and Y axes -level change cross slide: tical travel = 300mm (vert. position freely programmable) and max. horizontal movement 350mm -Bending forms of different sizes within a stack of bending forms can be approached as required. The bending direction is to the right. Control software Trumpf-Rohrtechnik IsoBend 2.0 Hydraulic unit with high-pressure multi-flow pump Mandrel retraction unit Slide rail (speed max. 362mm/sec. and acceleration max. 1100 mm/sec.) i.D. *

Condition: used, Year of construction: 1990, Technical details: tube diameter: 42 mm wall strength: 25 mm round bar steel: max. Ø 20 mm square material: Rohr 25 x 25 mm bending radius max.: innen max: Ø 20 und außen max: Ø 170 mm bending speed: keine Angaben °/s tube pipe draw up length: 3000 mm control: Software RC 7000 weight of the machine ca.: 2,8 t dimensions electric cabinet: 800 x 700 x 2000 mm dimension machine xH: 5,1 x 0,7 x 2,0 m Application: Machining of deformable tubes, rectangular tubes and round bars and square tubes. Description of the software RC7000, programming manual rectangular tube 42 x 20 x 2,5mm bending direction to the left Operation via control panel with monitor Accessories: -div. bending tools for tube Ø 25mm -12 div. collets -div. auxiliary and clamping devices Itedpfx Aju Ibvuodwsb *

Condition: used, Year of construction: 2007, pipe diameter (max.): 35 mm, overall weight: 2,700 kg, total length: 2,400 mm, total width: 1,400 mm, total height: 2,000 mm, Tube forming machine Brand: BLM Model: TUBE-FORM Year: 2007 Serial number: 415050200004 Weight: 2700kg Power: 12KVA Three-phase 380V Dimensions: 2400x1400x2000(h)mm Maximum tube diameter: 35mm Pushing force: 3.5t Ijdpfx Adjx Tt H Rjwstb Clamping force: 5t Max. working stroke: 130mm

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 250 h, machine/vehicle number: 0131, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 670 kg, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, T U B O M A T – simply smart. TUB-C G3001 The tube bending machine is ideally suited for single parts and small series production. The software allows individual tubes to be parameterized, simulated, and saved. Bending data is then transmitted to the machine via network (LAN). Standard bending equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Familiar 4-fold preselection of bending angles or program mode - 80 memory locations for up to 10 sets - Actual/target value display for bending angles - Compact, forward-positioned bending head - Optimized tooling concept - Hydraulic bending drive, operated via proven hand lever - Hydraulic tube clamping - Hydraulic pressure die actuation - Hydraulic mandrel extraction - Mobile use possible - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal base holder as drive unit for assembly attachments Technical Data - Tube capacity up to: 48.3 x 3.25 mm (E235, Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Max. bending angle: 180° (+10° overbend) - Bending accuracy: ±0.2° - Bending speed: 20°/s - Dimensions L/W/H: 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Electrical connection: 400 V / 50 Hz / 3 phase - Power supply requirements: CEE 16 A - Colour: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic tube bending software package - Oracle Express database for single-user application - Creation of isometries (single tube) - ConCSVImp – import interface for CSV format - Calculation of bending data taking springback, elongation, and spring-in into account - Checking of clamping lengths, start and end lengths - Output of bending data (printout) - BendSim – bending simulation and graphical representation via parametric tool design - BendCon – creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool holders 1 set of adapters for bending rollers with 25 mm bore 1 clamping piece adapter installation space 100 mm 1 support for fixed pressure die installation space 100 mm Tools Bending tools consisting of bending roller, clamping piece, and pressure die (fixed) Tube diameters / Bending radii - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Mandrels 3000 mm for steel tubes Design with lubrication channel for minimal quantity lubrication (MQL) - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly studs for cutting ring fittings (L = light, S = heavy design) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L Ijdpex E Rdwjfx Adwjtb - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Back-up plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes Tube Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses possible. The machine is used but in like-new condition. The machine can be inspected and demonstrated by prior arrangement. The machine must be collected from our premises but can be loaded by us. Commercial sale. Price plus 19% VAT. Subject to prior sale and errors.

Condition: good (used), Year of construction: 2005, control type: CNC control, - Max. bending angle: +/- 180 + 10° - Tube feed length: 4100 mm - Round steel tube up to 30 x 2.2 mm² - Round stainless steel tube up to 30 x 1.5 mm - Square tubes: 20 x 2.5 mm - Bending time for 90 degrees: 1.5 sec (advance) - Longitudinal feed speed: 450 mm/sec - Maximum bending radius: 125 mm - Freestanding bending head, 850 mm long Itedpox T Di Asfx Adweb - Bending axis drive: electrohydraulic

Condition: good (used), Year of construction: 2008, control type: CNC control, Stainless steel tube diameter: up to 42 x 2.0 mm Steel tube diameter: up to 42 x 3.0 mm Max. bending angle: +/- 180 + 10° Section modulus: 4.1 ccm Operating pressure: 6 bar Total power requirement: 5.5 kW Machine weight approx.: 3 t Isdpfx Asx T Diijdwjtb Space requirement approx.: 6100 x 2300 x 1300 mm

Condition: good (used), Year of construction: 1998, Tube diameter: 20 - 60.3 mm Tube feed length: 4500 mm Machine weight approx.: 0.11 t Total power requirement: kW Itedpfx Adjx T Dhfoweb Space requirement approx.: 5700 x 1600 x 900 mm - Preselection of 4 bending angles via rotary selector

Condition: good (used), Year of construction: 1994, control type: CNC control, controller manufacturer: Siemens, controller model: 840 D, Pipe diameter: 168.3 x 11 mm Pipe insertion length: 6000 mm Maximum bending radius: 700 mm Control system: Siemens 840 D Minimum bending radius: 80 mm Maximum bending angle +/-: 190 ° Connected load: 400 V / 50 Hz / 85 A Dimensions (L/W/H): 11.9 x 2.7 x 2.45 m Machine weight approx.: 33 t Additional information: - CNC control: CNC MMI Multicontrol 2000 - Control system NCU - PLC: Siemens Simatic S7 - Electrical connection: 400V / 50 Hz / 85 A The machine is fully automatic and equipped with a tool changer. Isdpfex T Dguox Adwotb The following tooling is available: Pipe Ø 48.3 mm; Radius 105 mm Pipe Ø 60.3 mm; Radius 120 mm Pipe Ø 63.5 mm; Radius 150 mm Pipe Ø 76.1 mm; Radius 190 mm Pipe Ø 88.9 mm; Radius 222 mm Pipe Ø 114.3 mm; Radius 285 mm Pipe Ø 139.7 mm; Radius 350 mm Pipe Ø 141.3 mm; Radius 700 mm Pipe Ø 168.3 mm; Radius 420 mm A few mandrels have a direct engraved marking. These have the following specifications: 88.9 x 8 mm; 88.9 x 4.5 mm; 114.3 x 8.8 mm; 139.7 x 8.8 mm; 168.3 x 12.5 mm; 168.3 x 8.8 mm The following outside diameters of the mandrels were measured: 23.2 mm; 32.3 mm; 37.1 mm; 41.5 mm; 59.3 mm; 70.3 mm; 77.7 mm; 80.9 mm; 88.7 mm; 93.2 mm; 94.7 mm; 103.0 mm; 112.8 mm; 118.8 mm; 128.9 mm; 138.5 mm; 147.2 mm; 153.6 mm The accessory package is valued at approximately €150,000.

Condition: used, Automatic Tube Bending Machine Brand: B.L.M. Model: B/90/M Ijdpfx Asx Swbisdwotb Description: Automatic tube bending machine designed for industrial applications, equipped with automatic programming for producing multiple bends in sequence. The machine allows adjustment of the reference distance, ensuring high precision and repeatability in the bending process. For all technical details, please refer to the technical data sheets available in the photos.

Condition: new, Year of construction: 2026, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Article number: 4300054 NC control for setting the bending angle Itsdpfxjvk Scge Adwjb Up to 50 programs can be saved High-quality, robust design Fast tool change Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Bending radius max. 162mm Bending angle max. 210° Bending speed(s) 2rpm Torque 2341Nm Dimensions and weights Length (product) approx. 600mm Width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Location: from stock - available immediately -

Condition: good (used), Year of construction: 1996, control type: CNC control, Tube diameter: 4-28 mm Wall thickness: / mm Minimum bending radius: 1.5 x D - 2.0 x D mm Control: Siemens LOGO Delivery rate: 4.5 l/min Max. bending angle +/-: 190° Nominal pressure: 250 bar Operating pressure: 3095 bar Delivery rate: 4.5 l/min Iedpfx Adox Sqcgowjtb Total power requirement: 1.5 kW Drive: Hydraulic cylinder and roller chain

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 6713-2023-2009, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, total length: 6,500 mm, total width: 1,000 mm, total height: 1,400 mm, power: 5.2 kW (7.07 HP), Tube bending machine Gelber Bieger Type: S03-60 Year of manufacture: 2009 Itodpfexuii Uox Adwjb Diameter: 03-60mm Length: 6m Electromechanical drive of the bending axis PLC control Bending angle resolution: 0.1° Electronic length and torsion measurement Manual stop system with overrun stops Torsion indexing: 15° increments Hydraulic tube clamping with adjustable clamping pressure Programmable mandrel retraction Three-jaw chuck Reinforced mandrel support extension up to 6m Tube bending software Including tooling for the following diameters: 50mm, 42.5mm, 40mm, 35mm, 30mm, 25mm, 20mm Collection ex works, unpacked

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ijdpfx Adendn Agswstb Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Itedpfxeng Exao Adweb Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: good (used), functionality: fully functional, Year of construction: 1995, Tube bending machine by MARK / Ridgid Type: 2H B Without tools Itedpfx Asx Ivpwedwjb

Condition: used, Year of construction: 1988, gebraucht 1988 090151 prompt, Zwischenverkauf v Italien 12800 € 1 42 mm 4665 mm 800 mm 1160 mm 1470 kg 42 x 2,5 mm 40 x 1,2 mm 30 x 40 x 1,7 mm 40 x 30 x 1,3 mm 255 mm 22 mm 180 ° 90 °/s 5,5 kW 120 l Capacity specifications refer to 400 N/mm² Maximum bending radius with pipe guide rollers: 255 mm Maximum bending radius with pipe guide slide: 175 mm Minimum bending angle: 4° Maximum usable length without positioning device: 3900 mm Maximum usable length with positioning device: 3370 mm Adjustable mandrel extension travel from 8 mm Opening and closing travel of the counter-clamping jaws: 0-45 mm Opening and closing travel of the rollers or slides: 12-22-42 mm Operating manual in German Isdpfsxx A Ekox Adwetb Machine does not comply with AMVO or UVV regulations Tools not included

Condition: repair required (used), functionality: not functional, Year of construction: 2004, CNC Tube Bending Machine Manufacturer: Schwarze-Robitec Model: CNC 80 E-MR Year of manufacture: 2004/2006 Condition: Needs repair CNC Control: PC-based Beckhoff CNC control Technical Data: - Maximum tube diameter x wall thickness: 60 mm x 3 mm - Minimum tube outside diameter: 16 mm - Minimum bending radius (to tube center): 25 mm - Maximum bending radius (to tube center): 240 + 50 mm - Maximum bending angle: 180° - Maximum tube feed length: 1000 mm - Bending direction: right - Machine weight: 7,000 kg - Total connected load: 39 kW - Voltage: 400 V / 50 Hz - Current: 100 A - Machine dimensions (L x W x H): 6.2 x 3.2 x 2 m Equipment / Accessories: - Hydraulic pressure and feed on slide rails - Automatic tube turning and repositioning unit - Electric mandrel bending device - Pneumatic mandrel rod safety system - PC control Beckhoff - Automatic central block lubrication - Laser scanner, safety fencing Machine condition – repair needed: The planetary gearbox of the transport carriage is defective and must be replaced. Spare parts costs according to quotation: planetary gearbox €1,674 + gearbox flange €1,850 + pinion €850 + VAT – installation not included. Cheaper price – sale in as-is condition Isdexzubvspfx Adwetb Immediate availability, including loading onto truck free of charge.